Nate sereeennate
C 3972
Reg. Nowe
FOURTH SEMESTER B.Sc. DEGREE EXAMINATION, APRIL 2016
(CUCBCSS-UG)
Core Course — Electronics
ELE 4B 05 - MICROPROCESSORS
Time : Three Hours Maximum : 80 Marks
Section A
Answer all questions,
Each question carries \ mark.
Name the fixed set of instructions in binary form.
Name the area of microprocessor where computing functions are done.
Pee
Name the memory where microprocessor can write into or read from.
Give an example for arithmetic operation performed by a microprocessor.
‘Name the part of microprocessor instruction that specifies data to be processed.
Name the set of memory location in E/W memory to store information during execution of =
program.
Name the programmable interval timer IC
Name the number of bits of data that can be communicated simultaneously by 6086
amas
microprocessor.
E 9. What is the time taken by a microprocessor to convert analog signal to digital signal called?
10. Give an example of input of a microprocessor.
(20 x 1 = 10 marks)
Section B
Answer any five questions.
Each question carries 5 marks.
Distinguish between RAM and ROM.
12. Define an instruction cycle.
3. What do you mean by T state?
14. What is a sub-routine?
15. What is the function of an ADC?
Give some advantages of 16-bit microprocessors over 8-bit microprocessors.
17. Explain the function of a bus in microprocessor.
(5 x 2= 10 marks)
‘Turn overas
19
20
21
22,
23
24.
25.
cs972
Section C
Answer any six questions.
Each question carries § marks
ctions of a microprocessor
Discuss the main s
Briefly explain op-code, operand and mnemonics
Discuss the addressing modes of 8085 microprocessor.
What are functions of PUSH and POP instructions?
Explain conditional CALL and RETURN instructions.
Discuss the architecture of 8086 microprocessor.
Discuss delay generation in 8085 microprocessor.
Briefly explain memory read and write cycles
(6 x 5 = 30 marks)
Section D
Answer any two questions.
Each question carries 15 marks.
Explain the architecture and operation of 8085 Microprocessor.
Discuss the instruction set of 8085 Microprocessor.
nn detail the Programmable Peripheral Interface-IC 8255 A
iC 8237
(2 «15 = 30 marks
Explain with the help of a block diagram the working of DIMA Controller