Professional Documents
Culture Documents
MARINE PROPULSION
SPECIFICATIONS
V-16, 4-Stroke-Cycle-Diesel
Displacement....................................... 69.0 L (4,210.64 in3)
Rated Engine Speed....................................................1800
Bore....................................................... 170.0 mm (6.69 in)
Stroke.................................................... 190.0 mm (7.48 in)
Aspiration................................... Turbocharged-Aftercooled
Governor............................................................Mechanical
Cooling System.......................................... Heat Exchanger
Weight, Net Dry (approx.).................... 8,029 kg (17,701 lb)
Refill Capacity
Cooling System.................................233.0 L (61.6 gal)
Lube Oil System............................. 798.7 L (211.0 gal)
Oil Change Interval................................................ 1000 hrs
Caterpillar Diesel Engine Oil 10W30 or 15W40
Image shown may not reflect Rear Sump Oil Pan
actual Engine Rotation (from flywheel end).................... Counterclockwise
Flywheel and Flywheel Housing.......................SAE NO. 00
Flywheel Teeth...............................................................183
Testing Width..................................1,735.60 mm (68.30 in)
PERFORMANCE CURVES
Metric
Zone 3 Curve 3
1800 1432 7597 214.1 365.4
1500 1271.2 8093 211.8 321.0
1300 1095.7 8049 212.5 277.5
1100 631.2 5480 225.2 169.5
900 422.9 4487 245.6 123.8
600 255.5 4066 224.5 68.4
NOTE: Curve P is a cubic prop demand curve with 3.0 exponent for displacement hulls only.
PERFORMANCE CURVES
English
Zone 3 Curve 3
1800 1920 5603 .352 96.5
1500 1705 5969 .348 84.8
1300 1469 5937 .349 73.3
1100 846 4042 .370 44.8
900 567 3309 .404 32.7
600 343 2999 .369 18.1
NOTE: Curve P is a cubic prop demand curve with 3.0 exponent for displacement hulls only.
Performance data is calculated in accordance with tolerances and conditions stated in this specification sheet and is
only intended for purposes of comparison with other manufacturer's engines. Actual engine performance may vary
according to the particular application of the engine and operating conditions beyond Caterpillar's control.
Power produced at the flywheel will be within standard tolerances up to 49º C (120º F) combustion air temperature
measured at the air cleaner inlet, and fuel temperature up to 52º C (125ºF) measured at the fuel filter base. Power
rated in accordance with NMMA procedure as crankshaft power. Reduce crankshaft power by 3% for propeller shaft
power.
DIMENSIONS
Engine Dimensions
(1) Length to Flywheel Housing 2786.7 mm 109.71 in
(2) Width 1735.6 mm 68.33 in
(3) Height 1863.7 mm 73.37 in
Weight, Net Dry (approx) 8029 kg 17,701 lb