CALCULATE THE THICKNESS OF TUBESHEET
PG-46.1 The minimum thickness and maximum allowable working pressure for stayed
flat plates and wire staying as flat plates
iat, by these rules, 1
with stays or staybolts of uniform diameter symmetrically spaced,
Given:
Design Press 1.025 N/mmn2
Material/Allowab SA -516 Gr70, 133 N/mm2
h of Stayrod = 200 mm
Part
be supported by si
mom
thickness of stayed plate
St
266 mm.
(This is the required minimum thickness with 200 mm center
distance be
en staysy tod
be carri
/ 16 = 763,625 N/ 16
LATE THE DIAMETER OF FROM THE AXIAL
id under axial
The equivalent diameter, od
ed = 26.62 mm {with noLATE THE
rom_DIAMETE!
Maximum load supported by ni
Ratio =
times
314 mmPFT-25.2 Stays shall be used in the tubesh:
the edges of the tube h