Professional Documents
Culture Documents
FACEGIDE
Set. 2022
™ Setup module &
FaceGIDE FaceGIDE Lite manual
3. CBCT ReOrientation 22
7. FaceGide Lite 84
3.1 Control Buttons 23~24
7.1 Log-in 85
3.2 Yaw & Pitch, Roll 25~27
7.2 File Import 86~87
3.3 FH Plane 28~30
7.3 Interface 88~92
7.4 Viewer 93~96
4. Skull STL export 31 7.5 Set up 97~105
7.6 Pattern Analysis 106~107
4.1 Control Buttons 32
7.7 Save 108
4.2 Convert Dicom to STL 33~35
7.8 File Sharing 109
4.3 Mx. Root Export 36~37
7.9 Option 110
3. CBCT ReOrientation 22
3.1 Control Buttons 23~24
3.2 Yaw & Pitch, Roll 25~27
3.3 FH Plane 28~30
7. FaceGide Lite 84
4. Skull STL export 31 7.1 Log-in 85
4.1 Control Buttons 32 7.2 File Import 86~87
4.2 Convert Dicom to STL 33~35 7.3 Interface 88~92
4.3 Mx. Root Export 36~37 7.4 Viewer 93~96
7.5 Set up 97~105
7.6 Pattern Analysis 106~107
5. Mn. Nerve Tracing 38 7.7 Save 108
5.1 Control Buttons 39 7.8 File Sharing 109
5.2 Mandibular Nerve 40~41 7.9 Option 110
FaceGide Setup
1 preparation
4
1. 1 FaceGIDE Setup
Preparation CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
The FaceGIDE Setup module is part of R2GATE software (Dental diagnosis and planning software of MegaGEN Implant).
Before entering the FaceGIDE Setup mode, a few pre-works are required in R2GATE DOD mode.
1 2 3 4 5 6
• upper model final • Superimposing upper & • Reset the patient’s head • Skull STL export • nerve tracing &
• lower model final lower model files to CBCT position. • upper root export export
No File Note
1 upper model final Final Bite position/ STL
2 lower model final Final Bite position/ STL
3 matched upper model Superimposed with CBCT
4 matched lower model Superimposed with CBCT
5 skull ReOriented via R2GATE
6 upper root Exported through the R2GATE
7 nerve Exported through the R2GATE
R2GATE
2 CBCT & STL Matching
STL-ization of CBCT
Convert dentition part(Maxillar or Mandible) of
CBCT to STL file for superimposing.
↕ Up and down
1
CCW & CW rotation
!
Initial
setup
STL-ization of CBCT
Convert dentition part(Maxillar or Mandible) of
CBCT to STL file for superimposing.
10
STL-ization of CBCT
Convert dentition part(Maxillar or Mandible) of
CBCT to STL file for superimposing.
11
Auto matching
!
! If matching is failed, click the “reset”
button. 1
12
Auto matching
Auto-matching completed
13
2. 2 STL Matching
Control Buttons CBCT &
STL matching
2
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
Matching Check
STL Control key
Frontal view Frontal view
Control function for precise registration of model &
1
CBCTMatching status can be checked and adjusted
through multiple section views
Sag
1 Fit checker
gital
• R : Right
vi e w
• L : Left
• C : Center (Anterior)
w
ie
Position and check the fitness. lv
ita
gg
Sa
3 4
4 CBCT Ratio control
2
(Do not use it normally)
14
2. 2 STL Matching
Control Buttons CBCT &
STL matching
2
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
Matching Check
Mouse action
Wheel scrolling
: CBCT zoom in & out
Short keys
Rotate Upward
to CCW Rotate
to CW
Left Right
Downward
15
2. 3 STL Matching
Find adjustment of STL CBCT &
STL matching
2
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
16
2. 3 STL Matching
Find adjustment of STL CBCT &
STL matching
2
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
17
2. 3 STL Matching
Find adjustment of STL CBCT &
STL matching
2
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
! Short key
(Available after clicking the fit checker)
Rotate to Upward
CCW Rotate to
CW
Left Right
Downward
18
2. 3 STL Matching
Find adjustment of STL CBCT &
STL matching
2
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
Down
Rotate to Upward
CCW Rotate to
CW
Left Right
Downward
19
2. 3 STL Matching
Find adjustment of STL CBCT &
STL matching
2
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
Left Right
Rotate to Upward
CCW Rotate to
CW
Left Right
Downward
20
2. 3 STL Matching
Find adjustment of STL CBCT &
STL matching
2
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
8 Check each view once more, and if it doesn't fit, repeat the Left Right
previous process and adjust again.
Down
Rotate to Upward
CCW Rotate to
CW
Left Right
Downward
21
2. 3 STL Matching
Find adjustment of STL CBCT &
STL matching
2
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
22
Function &
Control Buttons
Rotation
Grid on/off To the X, Y, Z axis
Move
STL opacity To the X, Y, Z axis
direction
control
Measurement tool
CBCT Filters
Import STL files
Frontal line Turn on/off Retrieve the reorientation.
24
Save the reoriented position
3. 1 ReOrientation
Control button CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
3
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
2 Rotation
: Rotate the CBCT to the X,
Y, Z axis.
3 Move
: Move the CBCT to the X, Y, Z
axis.
X axis rotation: Pitch control Y axis rotation: Yaw control Z axis rotation: Roll control
1
Move
2
25
1
2
26
Roll correction by
orbitale
2
3 Using Z axis rotation bar, set both
Orbitalle on the same line.
Reference line
(X) 3
(O)
27
2
Mid-Facial Plane
1 Adjust X axis movement, align the mid-
sagittal line of the skull with the Y axis line.
mid sagittal line
2 Check the soft tissue profile and finalize the
position of the Mid-facial plane.
28
3. 2 CBCT Reorientation
F.H Plane CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
3
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
CBCT ReOrientation
FH Plane.
FH(Frankfort horizontal plane)?
Horizontal plane from the upper edge of
porion and orbitalle.
infraorbital rim
2 Click the frontal line and move it to
the orbitalle.
2
3 2
29
3. 3 CBCT Reorientation
F.H Plane CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
3
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
Preparation
CBCT ReOrientation
FH Plane.
1 Drag the center of the crosshairs in the
2D sagittal view of CBCT to find the
lower orbitalle in the 3D lateral view.
2
1
Left Right
Down
30
3. 3 CBCT Reorientation
F.H Plane CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
3
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide Face Gide
CBCT ReOrientation
FH Plane.
3 On the 2D sagittal view of CBCT, drag
the center of the crosshairs or use the
keyboard to find the Porion in the 3D
lateral view.
6
31
Control Buttons
Use “STEP 4 Facial analyzer”
to export Skull STL files.
Turn on the
magnetic function
to set the mid-
saggital plane.
View option
(Camera option)
X,Y axis central line control CBCT to STL CBCT filter option
4
3 Adjust the Brightness and Contrast
of CBCT to clarify skeletal shape.
!
2D Sharpness control
34
4
5
35
36
3
2
1
4
37
5
Click the “STLization” button
and open the color option.
9
8
38
FaceGIDE
5 Mn. Nerve Tracing
Control Buttons
Workflow to find a
mandibular nerve Thickness control
CBCT filter
Panorama type
option
Mandibular Nerve
tracing
1 Left click the green line then drag and
place it to the mental foramen. !
1
! Drag it to left (Right) to find an
entrance of the mandibular nerve.
7
5 Double
Click the “Pencil” icon to draw the
Click
mandibular canal.
41
Mandibular Nerve
tracing
2
42
FaceGIDE
6 Setup mode
Watch the tutorial movie with manual
6.2 Skull Segmentation 6.5 Set up
https://youtu.be/jxyZuHctV5k https://youtu.be/sW2Qlj6GwBI
43
6. 1 FaceGIDE Setup
Enter the setup mode CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
R2GATE
Step 10.
FaceGIDE Setup
Enter the setup mode
in the step10.
1 Click the “Setup” icon to enter the
FaceGIDE setup mode. 1
2 Click “Yes”
44
6. 2 FaceGIDE Setup
Skull segmentation CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Undo
Import the upper teeth scan
file(STL) which is
superimposed from Step 1.
Separation
Grid On/Off area setting
(X, Y, Z axis) (+, -)
45
6. 2 FaceGIDE Setup
Skull segmentation CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
46
6. 2 FaceGIDE Setup
Skull segmentation CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
47
6. 2 FaceGIDE Setup
Skull segmentation CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
2 Click “OK”
3 Right-click on the dentition area.
↕ Up and down 3
2
CW, CCW rotation
+ - Thickness control
48
6. 2 FaceGIDE Setup
Skull segmentation CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
49
6. 2 FaceGIDE Setup
Skull segmentation CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
2 Click “OK”.
3 Right-click on the spot to delete.
Continuous
selection.
3
2
50
6. 2 FaceGIDE Setup
Skull segmentation CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Before After 5
separation separation
51
6. 2 FaceGIDE Setup
Skull segmentation CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
52
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Segments opacity
Cutting line depth control Import the Upper teeth Root
Control Buttons (Short key Z, C)
Initialize a Cutting line View control
Virtual Osteotomy Create a Cutting line
Cut
Maxillary View On
Export
segments
Mandibular View On
Undo
53
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy
!
Maxilla segmentation
Base upon a user's demand(STO), separate
3
Cranio and maxilla from the Skull STL.
1 2
Up Down
4 Click “OK“
54
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy
Maxilla segmentation
Base upon a user's demand(STO), separate
Cranio and maxilla from the skull STL.
4
4 Click "Import Root" and import the
upper teeth root file which is exported
in Step 4.
6 Click “Open”.
55
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy
Maxilla segmentation
7 Control the opacity of Cranio to check
the teeth roots' position.
56
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy
Maxilla segmentation
9 Change Cranio's position laterally..
! Short key 10
Increase (+)
Decrease (-)
57
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy
Maxilla segmentation
11 Click “Cut” button.
12 Click “Yes(Y)” button to complete 11
maxilla osteotomy.
12
58
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy
Mandible segmentation
Base upon a User’s STO
separate the mandible jaw to
mandible body and proximal 1 2
segments.
59
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy
Mandible segmentation
60
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy !
Mandible segmentation
4 Rotate the mandible jaw to set up the
vertical osteotomy line using the
“Camera Rotation” key. 4
Up Down
Left Right
61
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy
Mandible segmentation
5 Refer to the position of the mandibular
5
nerve, and create the cutting line using
the right click.. 4
5
7
1
6
Point Undo
62
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy
!
Mandible segmentation
7 Click “YES”.
63
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual osteotomy
Genio segmentation
64
6. 3 FaceGIDE Setup
Virtual Osteotomy CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
14
Virtual osteotomy
Segments labeling and
export
Put the label on each segment and
export it for the virtual setup.
13
5 11
65
6. 4 FaceGIDE Setup
Reference Point CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Segment List
CT View
(Transverse view)
Reference Point
Guide
CT View
(Sagittal view)
CT View
(Coronal view)
66
6. 4 FaceGIDE Setup
Reference Point CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Reference Point
[Landmark] Marking
Cranio
2
Mark the reference point on the Cranio
for diagnosis and tracking..
67
6. 4 FaceGIDE Setup
Reference Point CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Reference Point
!
[Landmark] Marking
Maxilla
Point Undo
68
6. 4 FaceGIDE Setup
Reference Point CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Reference Point
[Landmark] Marking
Maxilla
!
3 Fine-tunning of the reference point is
available on the right CT view. Click
the window zoom icon.
! Ref. Point movement short-key
Segment
3
!
69
68
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Segment, Design
View On/Off
CT View
(Transverse view)
CT View
(Sagittal view)
CT View
(Coronal view)
70
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
! Show and hide ! All setup function is activated only when the
of 3D axis (X, Y, Z) mouse is over the right side CT view.
Virtual Setup
Mx. Segment – Midline !
71
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual Setup
Mx. Segment – Yaw Correction
2
1
72
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual Setup
Mx. Segment
– Canting Correction
1 Click Left (right) rotation.
#16 MBC
#26 MBC
73
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual Setup
Mx. Segment
– Impaction (Posterior)
1 Click the “right” or “Left” button.
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual Setup
Mx. Segment – Setback
Setback 2mm
75
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual Setup
Final Bite - Grouping
Using the Mx.segment after virtual setup,
align the final bite and lower dentition
model. 1
4
Completed image
76
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual Setup
Final Bite - Grouping 7
77
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual Setup
Proximal segment setup:
Y-axis
1 Click the “Superior View” icon.
78
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Virtual Setup
Proximal segment setup
: Z-axis
1 Click the “Frontal View” icon.
2 Click the “Lt. proximal” 2
4
1
79
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Face Gide
Preview the Face-plate Design
Import the Face-plate and Saw-guide
design for the user's confirmation.
80
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Face Gide
Before and After
Comparing before and after surgery easily.
81
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Face Gide
Setup Report
The "Virtual Setup report" including images
and 3D coordination of each segment
(before and after surgery) is created
automatically. 1
2 Click “Yes”
82
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Face Gide
Project Save
Save the virtual setup file as a project file.
1
1 Click the “Project Save” icon.
2
!
83
6. 5 FaceGIDE Setup
Virtual Setup CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
Face Gide
Project Save
4 You can leave a text message to a user
and it will be transferred via FaceGIDE
lite.
84
6. 6 FaceGIDE Setup
Setup Report CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
FaceGide
Virtual Setup Report
1 Cover page 2 Setup Image (Tο) 3 Setup Image (Tv)
4 3D coordination direction guide 5 Cranio & Mx. Segment coordination 6 Mn. Segment coordination
85
6. 6 FaceGIDE Setup
Setup Report CBCT &
STL matching
Fine tuning
of matched
STL & OBJ
CBCT
ReOrientation &
Digital face bow
Facial
Analyzer
Digital Oral
Design
EZ Wax Up Mandibular
Nerve tracing
Implant
surgery
Quick Guide
10
FACEGIDE
Setup module &
FaceGIDE Lite manual
FaceGide
Virtual Setup Report
7 Proximal segment (Rt, Lt) coordination 8 Mx. Length / Occlusal Plane / FABA value
86
7. 1 FaceGIDE Lite
Log-in Setup module &
FaceGIDE Lite manual
87
7. 2 FaceGIDE Lite
File import Setup module &
FaceGIDE Lite manual
Project List
Import the “mpack(Mobile Pack)” file
1 Click the "Import MPack" button to import the
mobile data set exported from the R2GATE 1
FaceGIDE module.
88
7. 2 FaceGIDE Lite
File import Setup module &
FaceGIDE Lite manual
Project List
Open the Fpack file.
! If the FPack file was imported successfully,
the Fpack file will be shown in the project list.
!
1 Click the “Fpack file” in the project list.
1
89
7. 3 FaceGIDE Lite
Interface Setup module &
FaceGIDE Lite manual
PC iOS
Parallel movement of
segment
Left+Right click Two finger Movement ▪ Camera View Control (SET-UP mode)
Rotation is not X axis rotation (-) X axis rotation (+) Y axis rotation (-) Y axis rotation (+)
Set up mode Set up mode
allowed.
90
7. 3 FaceGIDE Lite
Interface Setup module &
FaceGIDE Lite manual
Segment List
Setting
Transparent &
Segment On/Off Mouse control
indicator Exit
3D coordination
table of Reference
points(Landmarks)..
Mx. Length, Occlusal
Plane, and FABA values
can be checked.
Before and after
surgery comparison
view.
Grid on/off
Segments color
Messages from
Design center
View Control
91
7. 3 FaceGIDE Lite
Interface Setup module &
FaceGIDE Lite manual
5mm distance
Control Buttons
2D Grid
5mm Grid is overlayed on the segment.
Users can measure the distance between
each reference point.
92
7. 3 FaceGIDE Lite
Interface Setup module &
FaceGIDE Lite manual
Control Buttons
Segment Color mode
Change segment color to black & white.
93
7. 3 FaceGIDE Lite
Interface Setup module &
FaceGIDE Lite manual
Control Buttons
Designer Comment
Read the comments & notes of the
setup designer.
94
7. 4 FaceGIDE Lite
Viewer Mode Setup module &
FaceGIDE Lite manual
!
2 Control the transparency of 1
segments in the Segment list.
2
Icon Option
View On
View Off
95
7. 4 FaceGIDE Lite
Viewer Mode Setup module &
FaceGIDE Lite manual
Displacement
3D coordination of point
after surgery.
96
7. 4 FaceGIDE Lite
Viewer Mode Setup module &
FaceGIDE Lite manual
2 !
97
7. 4 FaceGIDE Lite
Viewer Mode Setup module &
FaceGIDE Lite manual
!
"Before surgery" and "After surgery"
images are shown at the same time.
3 4
4 “FacePlate” and “Saw-Guide” designs
will be shown.
98
7. 5 FaceGIDE Lite
Setup Mode Setup module &
FaceGIDE Lite manual
SETUP Mode
Landmark
In Setup mode, the user can modify the 3D 1
coordination of each landmark(reference
points).
99
7. 5 FaceGIDE Lite
Setup Mode Setup module &
FaceGIDE Lite manual
2
! “Segment Control” is applied based on
the view currently viewed by the user.
100
7. 5 FaceGIDE Lite
Setup Mode Setup module &
FaceGIDE Lite manual
SETUP mode
Segment Control bar - action
101
7. 5 FaceGIDE Lite
Setup Mode Setup module &
FaceGIDE Lite manual
SETUP Mode
Notice
! The position of the mandible follows the
Maxilla automatically because the maxilla
and mandible are tied up to the final bite.
102
7. 5 FaceGIDE Lite
Setup Mode Setup module &
FaceGIDE Lite manual
SETUP Mode
#Example: Midline Correction
Op. plan : #11/21 1mm to Lt
103
7. 5 FaceGIDE Lite
Setup Mode Setup module &
FaceGIDE Lite manual
SETUP Mode
#Example: Yaw Correction
Op. plan : CW rotation 0.5°
Reference point : U1
3
2 Change skull to bottom view. 1
2
5 Check the X-axis 3D coordination of the
landmark.
104
7. 5 FaceGIDE Lite
Setup Mode Setup module &
FaceGIDE Lite manual
SETUP Mode
#Example: Canting Correction
Op. plan : #26 0.5mm up
Reference : #16
2 4
105
7. 5 FaceGIDE Lite
Setup Mode Setup module &
FaceGIDE Lite manual
SETUP Mode
#Example: Posterior impaction
Op. plan : #16,26MBC 4.5mm up
Reference : U1
1 Choose "U1" in the landmark tracking list.
2 Rotate the maxilla using the "Rotation button" on the
segment control checking the Y-axis 3D coordination of
#16 and #26 MBC points.
106
7. 5 FaceGIDE Lite
Setup Mode Setup module &
FaceGIDE Lite manual
SETUP Mode
#Example: Set back
Op. plan : 2mm
Reference : U1
2 5
107
7. 6 FaceGIDE Lite
Facial pattern analysis Setup module &
FaceGIDE Lite manual
SETUP Mode
Facial Pattern analysis
Calculate the Mx. Length, angle of the
Occlusal plane, and FABA.
After surgery
Before surgery
108
7. 6 FaceGIDE Lite
Facial pattern analysis Setup module &
FaceGIDE Lite manual
SETUP Mode
Pattern analysis
< Mx. Length > < Occlusal Plane > < FABA >
Nasion
A-Point
Erp
U1
#16-26 Point
B-Point
Distance Distance Degree
1. Nasion Point 1. U1 1. FH Plane
2. Erp Point 2. #16-26 Point 2. A-point, B-point Line
109
7. 7 FaceGIDE Lite
Save changes and exit Setup module &
FaceGIDE Lite manual
SETUP Mode
Save changes & exit
After modification of landmarks(reference 1
points), save changes..
110
7. 8 FaceGIDE Lite
File sharing Setup module &
FaceGIDE Lite manual
SETUP Mode
Share the project file
Transfer the modified project file to the center to
apply changes..
1
! The project file will be saved below..
C: -> User -> PC name-> AppData -> LocalLow
-> Megagen -> FaceGide Lite -> temp
111
7. 9 FaceGIDE Lite
Program setting Setup module &
FaceGIDE Lite manual
Program setting
Language setting
(Korean /English)
Choose an appropriate Choose a favorite background color of
resolution for pc and viewer mode.
tablets..
112