Professional Documents
Culture Documents
Chase Center
San Francisco, CA
T000151_072220
PanelTack™ Technical Information and Installation Guide 1
Hotel Sofitel
Mexico City, MX
AN INDUSTRY LEADER IN DISCREET WALL PANEL other commercial and residential buildings. The benefits of
AND FAÇADE CLADDING SOLUTIONS a façade system are also ideal for retrofitting over existing
building exteriors, as well as for smaller or more decorative
Bostik has been a leader in the field of wall cladding and
projects that can complement an existing design or
panel bonding with the PanelTack™ system for more than 30
construction. With panels in an extensive range of sizes and
years, with proven performance to highlight our knowledge,
materials that can imitate or complement the appearance of
experience, and innovation on a global scale.
numerous building aesthetics, the overall look of any building
Wall cladding has gained popularity in recent years for its can change dramatically.
durability, energy-saving benefits, the ease, speed and
cleanliness of installation, and for a seamless aesthetic look. MORE BENEFITS TO A BONDED WALL PANEL OR
The adhesive system prevents the panels from sagging FAÇADE CLADDING SYSTEM:
under their own weight, and they absorb cyclical expansion
• A
discreet attachment method for an aesthetically
and contraction due to environmental changes, such as pleasing look
wind, temperature, and humidity. Wall panel and façade
• E
nergy-efficient cladding systems have higher thermal
cladding materials such as gauged porcelain tile panels, high- resistance and fewer thermal breaks
pressure laminate (HPL), aluminum composite materials
• The elastic adhesive is more resistant to vibrations and
(ACM), pressed mineral wool (PMW), fiber cement boards
tremors
(FCB), porcelain, ceramic, concrete, porous substrates and
• No cold bridges
other materials, to name a few, are able to absorb wind loads
and ensure a lasting bond under extreme conditions. • A bond that is able to absorb pressures and tensile forces
due to wind
The complete PanelTack™ System includes Primer PanelTack™,
• Favorable stress distribution
FoamTape™, PanelTack HM™ and other PanelTack™ primers.
• No unsightly screws that eventually lead to dirty stripes
Please refer to each product’s Technical Data Sheet for a
comprehensive list of approved substrates. • No electricity required on site
• No dust and noise caused by drilling and fastening
WHY CHOOSE A WALL PANEL OR FAÇADE CLADDING • No weakening of the panel (remains whole with no drilling
SYSTEM? required)
With its vast design capabilities and reduced energy • Thinner wall panels can be used
consumption, wall panel and façade cladding is prevalent • Quick and easy adhering method
in large, state-of-the-art applications, such as in the new
• Interior and exterior use
construction of hospitals, schools, stadiums and various
SEISMIC TREMORS/EARTHQUAKES
The elastic bond of PanelTack HM™ has the ability to absorb
some vibrations caused by instances of heavy traffic and
seismic movements.
s1, 2, 3
A2 d0 1, 2 A2 - Limited contribution during a fully developed fire
s1, 2, 3
B d0 1, 2 B - No flashover at the start of a fire
s1, 2, 3
C d0 1, 2 C - Flashover 20 minutes after the start of the fire
s1, 2, 3
D d0 1, 2 D - Flashover within 10 minutes after the start of the fire
F F - Direct flashover
PanelTack
Your complete solution for
™ PRIMER PANELTACK™
MULTI-PURPOSE PRIMER AND CLEANER
Primer PanelTack™ is a multipurpose cleaner
façade and wall panel cladding and primer used on the back of façade and
decorative panels, and on aluminum and
stainless steel support constructions. With
The complete PanelTack™ System includes Primer
high coverage and a 10-minute quick drying
PanelTack™, FoamTape™, PanelTack HM™ and other PanelTack™
time, Primer PanelTack™ is suitable for use
primers. These products work together in a simple step-by-
with various panels and wall cladding materials, including
step process that ensures permanent and comprehensive
mesh-backed GPTP, high-pressure laminate (HPL), aluminum
coverage for a seamless, durable and decorative finish.
composite materials (ACM), and other materials.
THE ADHESIVE
PANELTACK™ HM™
PANELTACK™ ADHESIVE Specs
Coverage Approx. 350 ft2 (approx. 32.5 m2)
PanelTack HM™ is a
Packaging 16.9 fl oz (500 mL), 6 cans per case
homogenous, highly elastic, smooth adhesive that provides
a continuous bond of the panel to the support structure.
PanelTack HM™ is suitable for use with various panels and
wall cladding materials, including gauged porcelain tile PRIMER MSP™
panels, some high-pressure laminate panels (HPL), aluminum PRIMER FOR FIBER CEMENT BOARDS,
composite materials (ACM), pressed mineral wool (PMW), MINERAL AND POROUS WALL PANELS
porous substrates, fiber cement boards (FCB), concrete, Primer MSP™ is suitable for use with various
porcelain, ceramic and other natural materials. panels and wall cladding materials, including
some fiber cement boards (FCB), pressed mineral
Specs
wool (PMW), natural stone, ceramic and porcelain
Coverage Approx. 40 linear feet (12 m) per 20 oz sausage
tiles, brick and concrete cladding panels.
Packaging 20 oz per sausage, 12 sausages per case
THE TAPE
Specs
PANELTACK™ FOAMTAPE™
Coverage Approx. 20-40 ft2 (approx. 1.8 to 3.7 m2)
ADHESIVE TAPE AND SPACER
Packaging 16.9 fl oz (500 mL), 6 cans per case
FoamTape™ is part of the complete
PanelTack™ system and serves as
a spacer for the adhesive bead, PRIMER Q™
to ensure the proper adhesive
PRIMER FOR POROUS WALL PANELS
thickness between the panel and the support structure.
FoamTape™ provides an initial fixation of the panel or substrate Primer Q™ is a transparent polyurethane
until the PanelTack HM™ adhesive has cured, while ensuring a suitable for use with various panels and wall
strong, lasting bond. cladding materials, including some fiber
cement boards (FCB), porous substrates, and
FoamTape™ is suitable for use with almost any panels and wall
other materials.
cladding materials, including gauged porcelain tile panels,
high-pressure laminate (HPL), aluminum composite materials
(ACM), pressed mineral wool (PMW), fiber cement boards (FCB),
concrete, porcelain, ceramic, porous substrates and other
natural materials.
Specs
Specs Coverage Approx. 20-40 ft2 (approx. 1.8 to 3.7 m2)
Packaging 82 ft (25 m) per roll, 20 rolls per case Packaging 33.8 fl oz (1 L), 6 cans per case
RECOMMENDED SUBSTRATES
AND PANEL MATERIALS
There are various types of substrates on the
market, each with their own specific features. The
PanelTack™ Wall Panel and Façade Cladding System
from Bostik is compatible with the following
cladding types and wall panel materials*
1. Ensure the correct primer for the panel material being 6. Do not remove the protective film until just before the
used. Reference the Recommended Substrates and Panel installation of the panel, immediately after PanelTack HM™
Materials chart in this guide, or reference each product’s has been applied.
Technical Data Sheet for a full list of approved materials.
a. Apply Primer PanelTack™ to the cladding panel or substrate
using a clean, dry, lint-free cloth where the panel will
come into contact with the PanelTack™ adhesive.
b. Apply Primer MSP™ or Primer Q™ to the cladding panel or
substrate in one consistent layer using a brush or paint
roller where the panel will come into contact with the
PanelTack™ adhesive.
2. Allow the primer to dry completely (at least 10 minutes
for Primer PanelTack™; 60-90 minutes for Primer MSP™; 2
hours for Primer Q™.)
APPLY PANELTACK HM™ ADHESIVE • Confirm panel lengths are suitable for system components
and building codes.
1. After PanelTack FoamTape has been applied, apply PanelTack
™ ™
HM™ vertically and continuously, from top to bottom. • Maintain an air gap of 3/4" (2 cm) or greater between the panel
and the next component of the wall system. Do not block the
2. Cut the PanelTack HM sausage tip and insert it into an air
™
ventilation of the façade system to allow for continuous airflow.
pressure gun, electric caulking gun or sausage gun. Screw
on attached V-notch applicator tip to make a triangular
strip with a width and height of 3/8" (10 mm). Apply the NOTE
adhesive on one surface only at a 90° angle relative to the
Prior to installation, apply PanelTack™ to a test area to
substrate for optimum bead size and shape.
become familiar with the application and to ensure product
3. PanelTack HM™ should be applied a minimum of 3/8" (10 mm) satisfaction. It is the user’s responsibility to determine the
distance from FoamTape™, creating sufficient space for the
condition and suitability of all surfaces before application.
adhesive to “flow” to all sides when pressing the panel. NOTE: If
the adhesive bead is applied too close to the FoamTape™, there Given the variety of uses for our products, the instructions
is a risk that adhesive will run over the tape when the panel is
contained in this document are provided for illustrative purposes.
pressed, resulting in insufficient adhesion of the FoamTape™.
NOTE: PanelTack HM™ should not be applied too close to the We advise our customers to ensure that the product meets the
edge because the adhesive bead might roll over the edge. intended use, taking responsibility for its use in each case.
WARRANTY
The PanelTack System warranty requires completion and submittal of
the PanelTack Jobsite Log, available at bostik.com/us. Limited Warranty
found at www.bostik.com/us or call 800.726.7845. TO THE MAXIMUM
EXTENT ALLOWED BY LAW, BOSTIK DISCLAIMS ALL OTHER EXPRESS OR
INSTALL THE PANEL
IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF
1. Once the PanelTack HM™ adhesive is applied, remove the MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. UNLESS
silicone-coated film on PanelTack™ FoamTape™ just before
OTHERWISE STATED IN THE LIMITED WARRANTY, THE SOLE REMEDY FOR
mounting the panel.
BREACH OF WARRANTY IS REPLACEMENT OF THE PRODUCT OR REFUND
2. The panel should be installed within 10 minutes (open
OF THE BUYER’S PURCHASE PRICE. BOSTIK DISCLAIMS ANY LIABILITY
time) of applying the adhesive. If left open for longer, the
PanelTack HM™ adhesive may start to cure, resulting in a FOR DIRECT, INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES TO
skin formation on the adhesive. Any skin formation will THE MAXIMUM EXTENT ALLOWED BY LAW. DISCLAIMERS OF IMPLIED
result in insufficient final adhesion. WARRANTIES MAY NOT BE APPLICABLE TO CERTAIN CLASSES OF BUYERS
3. Once the panel is positioned correctly, press firmly and rub AND SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
gently where it comes into contact with the FoamTape™. INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS
MAY NOT APPLY TO YOU. It is the buyer’s obligation to test the suitability
CLEAN UP of the product for an intended use prior to using it. The Limited Warranty
extends only to the original purchaser and is not transferable or assignable.
Clean all tools and equipment with soap and water. Do not
Any claim for a defective product must be filed within 30 days of discovery
allow material to dry on unintended surfaces.
of a problem, and must be submitted with written proof of purchase.
STORAGE
PANELTACK™ INSTALLATION CHECKLIST
Store in a cool, dry area not affected by freezing or hot
The following shows a brief description of each step of the
temperatures (40°F to 77°F, or 5°C to 25°C). Shelf life is one
PanelTack™ installation process. Use this installation checklist
year from date of manufacturing in unopened packaging.
as a guide while you are on the jobsite.