Professional Documents
Culture Documents
1.Begin with a bird base, colored 2.Precrease the top. 3.Precrease through the
side out. Fold the top flaps intersection of creases.
down.
5-6
19.Pull the flap through. 20.Repeat steps 18-19 in mirror 21.Bring the colored layers to
image. the surface.
22.Swing down. 23.Tuck flap into pocket. 24.Swing the large flap over.
8-16
25.Carefully fold flap up, 26.Repeat steps 8-16 on this 27.Swing over.
releasing the trapped layer. flap.
24-27
28.Repeat steps 24-27 in mirror 29.Turn over. 30.Wrap a single layer around
image. each side.
37.Closed sink. 38.Swing one flap up. 39.Swing the large flaps back.
35-39
40.Repeat steps 35-39 in mirror 41.Swing one flap over. 42.Swing one flap up (a portion
image. of the fold is hidden under
the colored region).
46.Rearrange the flaps as 47.Swing up while incorporating 48.Swing over bottom flap.
indicated. a reverse fold. Stretch top flap outwards.
49.Swing down two flaps. 50.Swing over one flap. 51.Valley corner down.
41-51
61.Precrease. 62.Valley the top single layers 63.Valley the tail up.
outwards while folding the
tail upwards. The tail will not
lie flat.
64.Pleat the tail. The valley fold 65.Fold the sides back to the 66.Precrease. The resulting
lies along an existing crease. center. A swivel will form width should be about as
The mountain fold is midway underneath the pleat. wide as the colored section
from the valley fold to the below.
white portion.
67.Squash the tip. 68.Swing the top back to reveal 69.Valley upwards; do not
the colored triangle. crease sharply.
Mountain back the excess
paper at the base ofthe tail.
72-82
82.Swing over. 83.Repeat steps 72-82 in mirror 84.Lightly fold the model in half.
image.
1/4
85.Squash flap, being sure to 86.Reverse fold one half into 87.Swing over.
distribute the inner layers as angle quadsectors. Reverse
evenly as possible. The tiny the other half along the angle
hidden flap should go bisector.
towards the head. Rotate.
85-88
88.Squash fold. Repeat steps 89.Reverse fold. 90.Swivel up. Make the valley
85-88 behind. fold as light as possible.
89-92 Edge A
91.Valley fold. 92.Swing over two flaps. Repeat 93.Ccrimp the head into the
steps 89-92 behind. body so that edge A lies
straight. Alow the antennae
to swing up.
97.Tuck the tip of the win into 98.Rabbit ear the front legs. Due 99.Crimp the middle legs in half.
the pocket. Shape the wing. to the thickness, they will
Repeat steps 94-97 behind. stick out slightly.
100.Pull the antennae back and 101. Curl the antennae around 102.Crimp the legs. Curl the
outside reverse fold the the head. Double rabbit ear antennae and the tip of the
head around them. the head. Pull tail upwards. head.Round out the
abdomen, and curl the
wings around it.
103.Completed Bee
©1994 Marc Kirschenbaum