Professional Documents
Culture Documents
www.bfwindia.com
Toll Free: 18004253332
Bharat Fritz Werner
BMV 50
Series: BMV50 | BMV50 TC24 | BMV50 TC30
BMV50 CNC vertical machining center is ideal for manufacturers who are part of the supply
chain for engineering and auto component industries.
The rigid structure of BMV50 is complemented by precision spindles and world class sliding
elements. This ensures sustained, high quality performance.
The compact design of the machine enables a smaller foot print, which is ideal for job shops
where the space is constraint.
Due to its simplified design, a provision for chip disposal can be provided either at the front or
rear depending on customer requirements. With its contemporary aesthetics and an
operator-friendly, sleek design, BMV50 will be a prized possession.
Structure
Rugged structure of high quality,
stress relieved casting, and thermo-symmetrically
arranged LM guide-ways for chatter free precision
machining under extreme working conditions
BMV 50
Spindle Spindle Characteristics
BMV 50 - 8000 rpm
T-SLOT DETAILS
Standard &
Capacity:
Table longitudinal travel (X-axis) mm 800 800 800
Optional Features
Table cross travel (Y - axis) mm 510 510 510
Head stock travel (Z - axis) mm 510 510 510
Spindle nose face to table top mm 100 - 610 100 - 610 100 - 610
AC servo drives S
Increased daylight area with column
mm 300 - 810 300 - 810 300 - 810
height block (optional) AC variable speed spindle motor S
Distance from floor to table mm 950 950 950 Hardened and ground ball screws S
Spindle center - column front distance 540 540 540 Feedback through absolute encoder S
Table: mm 1000 x 510 1000 x 510 1000 x 510 Automatic tool clamping-unclamping S
Table size mm 1000 x 510 1000 x 510 1000 x 510 Centralised automatic lubrication S
T - slot (No./ size/ pitch) mm 5/18/100 5/18/100 5/18/100
Spindle taper air blow S
Maximum load on table standard kg 600 600 600
Rigid tapping** S
Spindle & Axes:
Front chip disposal S
Taper BT-40 BT-40 BT-40
Rear chip disposal O
Speed standard rpm 8000 8000 8000
Telescopic covers with wipers S
Speed optional - l rpm 10000 10000 10000
Full machine gaurd S
Spindle Power - Standard:
Hydraulic counterbalance O
Fanuc/ Mitsubishi, Cont./ 30 min. rating kW 7.5/ 11 7.5/ 11 7.5/ 11
Manual pulse generator S
Siemens, Cont./ S6-40% rating kW 9/13.5 9/13.5 9/13.5
RS 232 serial/ USB interface S
Rapid traverse - X/Y/Z - standard m/ min 40 40 40
Levelling pads S
Feed rate mm/ min 1-10,000 1-10,000 1-10,000
Maintenance tool kit S
Guide ways Type LM LM LM
Accuracy (As Per ISO 230-2): Higher spindle RPM with chiller unit O
Repeatability mm 0.010 0.010 0.010 Chip conveyor in lieu of coolant tank with chip tray O
Tool change system NA Twin Arm Twin Arm 16/ 25/ 40 bar coolant through spindle O
AC for electrical cabinet O
Tool storage capacity - Standard
Nos. NA 24 30
(optional) Provision for 4th and 5th axis rotary table O
Pull stud - MAS 403 P40T-1 P40T-1 P40T-1 4th axis rotary table O
Maximum tool dia with all pockets full mm NA 75 75 Ball screw type auto pallet changer with twin pallets O
Maximum tool dia adjacent pockets Voltage stabilizer O
mm NA 140 140
empty
Ultra isolation transformer O
Maximum tool length mm NA 250 250
Increased day light area through column raiser block O
Maximum tool weight kgs NA 8 7
Tool to tool time sec NA 2.5 2.5 Air nozzle, 3 tier lamp, air gun, coolant gun O
NA - Not Available
Note: Floor space, weight & connected load indicated is subject to change based upon the accessories
ordered along with machine.
BFW kanaka@BMV50-190118