ICATION OF JUTE SAND SNAKES.
SPECIFICATIONS
MATERIAL FOR SAND ] Closely woven superior quality Jute Fabric (16 OZs
SNAKES double weave)
STICHING
(@) Tread to be used Thread to be used No, stitching from inside,
(b) Sand Snakes @ Sand Snakes should be made out of one piece only.
(ii) Double running stitch at the bottom and on the
length side. The folding of length side should not be
ess than 1 cm and bottom not less than 2 cms. The
stitches should not be visible from outside,
(iii) The bottom should be flat and avoid sharp points
projecting out of the sand snakes.
(iv) The other end of the width side (mouth) should be
open with a fold not less than 2 ems and single
stitched.
DIMENSIONS
(A) __ | Stitched container should have length not less 80 £4 ems from one end to another
Length | end.
(B)__ | The width of the stitched sand snakes should not be less than 12 + Zems Sand
Width | snakes must be filled only 60 % to 70 % So that they lie flat on the floor.
GUARANTEE The Supplier shall give guarantee about the tubular container (sand snakes)
as per specification mentioned above. The supply shall cover by guarantee
against any defects and deterioration in quality for a period of one year
from the dated of receipt of stores. The supplier shall replace such
deteriorated items, if any, within the guarantee period ie. one year.
Whenever the stores of receipt are not found in accordance with the terms
and conditions, consignees shall reject such stores. The supplier shall
replace the material within 14 days (fourteen days) on receipt of intimation
of rejection/deterioration. The rejected stores shall be disposed off at the risk
and cost of the supplier, if not removed within fourteen days.