Professional Documents
Culture Documents
Reinz RSB 360
Reinz RSB 360
B I N D I N G A N D L A M I N AT I N G S Y S T E M S
S P E C I F I C AT I O N S - AT A G L A N C E
2 :1 Pitch
3 :1 Pitch
Diameter Binding Perfora- Diameter Binding Perfora-
thickness tion thickness tion
User friendly control panel simple One feeding wheel and a set of clo- Hand wheels provide easy, accurate Automatic binding table complete with Inch mm mm mm Inch mm mm mm
and comprehensible layout makes it sing bars is required to close all wire adjustments to be made to determine front, side stops and secure clamp 1/4” 6,9 4,5 4,0 x 4,0 5/8” 16,0 13,0 5,5 x 5,5
easy to use. diameters. This comes as standard the height of the closing bar depen- allow accurate binding. Optional step 4,0 6,0
and is built into the machine. dent on wire size (shown on an ana- guide for special bindings (oversized 5/16” 8,0 6,0 4,0 x 4,0 3/4” 19,0 15,0 6,0 x 6,0
Adjustments can be made to wire logue display unit). covers etc.) is available on request. 4,0 6,0
diameters simply and quickly. 3/8” 9,5 7,5 4,0 x 4,0 7/8” 22,0 18,0 6,5 x 6,5
4,5 6,5
7/16” 11,0 9,0 4,0 x 4,0 1” 25,4 20,0 6,5 x 6,5
4,5 6,5
1/2” 12,7 10,0 4,5 x 4,5
5,0
9/16” 14,3 11,0 4,5 x 4,5
5,0
OPEN HERE
The machine is operated by a foot The binding table moves forward into
pedal and situated at a comfortable the closing bars allowing the wire comb
working height. to be closed around the pre punched
Fully automatic, sensor controlled wire spool
book.
un-winder with integrated separation paper
Place the pre punched book on the bin- re-winder; allows for smooth easy unwinding
ding table against the front and side After the wire has been closed the bin- on all wire diameters.
stops. Next use the foot pedal to auto- ding table moves back to original positi-
matically clamp the pre punched book on releasing the bound book, allowing
and engage binding table. for next pre punched book to be inserted.
F E AT U R E S
RENZ PUNCHING
[+] Book binding speed is approximately [+] Very low noise level TECHNOLOGY
800 – 1.400 book/h*. Punching companions for the RSB 360 QSA.
[+] Short setup time due to QSA techno-
[+] Completely equipped to close logy (Quick Size Adjustment)
10 wire diameters from
1/4" - 1" (6,9 - 25,4 mm ) [+] No special training required
[+] No compressed air necessary [+] Very reliable due to cam controlled
drive technology
[+] Binding width from 60 to 360 mm
[+] User friendly control panel
*Depends on product, logistics and operator Electrical desk top punch Electrical heavy duty Fully automatic punching and Fully automatic punching and
working width 500 mm punching and perforating machine perforating machine perforating machine.
interchangeable punching dies, working width 700 mm working width 360 x 360 mm working width 360 x 360 mm
punching thickness up to 4 mm** interchangeable punching dies, interchangeable punching dies, interchangeable punching dies,
* also see separate brochure
Speed up to 500 cycles/ h*** punching thickness up to 4,5 mm** punching thickness up to3,5 mm ** punching thickness up to 3 mm ** ** depends on punching dies
speed up to 500 cycles/h*** speed up to 100 cycles/min*** speed up to 150 cycles/min*** *** depends on product