Professional Documents
Culture Documents
3. Hydraulic system
The hydraulic system is located on the upper part of the machine and consists of motor, oil pump,
valve block, pipeline, pressure display and so on.
electric motor
The motor adopts a fully enclosed, self-fan-cooled, three-phase asynchronous motor.
◆ Oil pump
The oil pump adopts the most widely used 25F gear pump in China with reliable performance
and sufficient supply of spare parts, and has a long service life.
Low noise.
◆Valve block
The valve block adopts a two-way cartridge valve, which adopts pilot control and cartridge
connection, and the main valve structure is a cone valve hydraulic unit.
pieces. It has simple structure, strong anti-pollution ability, reliable performance, small flow
resistance, fast response, small impact,
It has a series of advantages such as flexible control mode, multi-function, high degree of
ternaryization, and easy integration.
◆Fuel tank
The oil tank is a steel plate welded structure, pickling and anti-rust treatment are carried out
during installation.
◆Pipeline
The piping of the hydraulic system shall be flanged as much as possible to prevent leakage of the
piping.
Pressing mechanism
After several pressing oil cylinders installed on the support plate in front of the frame enter the
oil, the pressing head overcomes the tension of the tension spring
Then press down to compress the sheet. After the cutting is completed, it is reset by means of
the pulling force of the tension spring. The size of the pressing force
It increases with the thickness of the sheared sheet.
◆Pressure display
The pressure display of the main cylinder is detected and displayed by the pressure gauge, which
is an anti-shock pressure gauge filled with silicon oil.
◆ Equipped with an oil filtration system to ensure stable and reliable operation of the machine.
The seal is selected from Taiwan Dingji Company, which has good sealing performance, reliable
operation and long service life.
The machine tool can work continuously under the rated load, the hydraulic system has no
leakage and is continuously stable with high precision.
4. Performance characteristics
There is an auxiliary knife seat on the working surface, which is convenient for micro-adjustment
of the blade.
There is a feeding roller on the working table, which is easy to operate.
Blade gap adjustment adopts stepless adjustment mechanism to meet the shearing needs of
different plate thicknesses and materials.
The rectangular lower blade can be cut with four cutting edges, which prolongs the service life of
the blade.
Adjusting the cutting stroke can not only improve the processing efficiency, but also realize the
segmental cutting function.
The number of cuts is automatically counted, reducing the tedious work of counting. Host (X-axis)
repeat positioning accuracy ± 0.20mm
Equipment positioning accuracy ± 0.30mm.
10 main motor
Model Y132M-4
Power 11KW
Speed 1140 r/min
12 gear pump
Model 16F
Flow 40ml/r
Pressure 31.5 MPa
13 Machine Dimensions
Length 3860mm
1700 mm wide
1700 mm high