Professional Documents
Culture Documents
EV charging
8/5
Technical features
Auxiliary power supply
Voltage range [V]
2CSC400120F0004
PROFIBUS
Frequency range [Hz]
Power factor
Active power
Active energy
Measurement range
Voltage [V]
phase. No decimal places.
Current
Frequency [Hz]
Power factor
Installation
Distribution networks Low and medium voltage
Single-phase connection
Three-phase with neutral - Three-phase without neutral
Current inputs [A] Always use external CT
AC
—
Energy efficiency
M2M network analyser
THD
Voltage and current
Energy measurement
Single-phase maximum value
counted
Three-phase maximum value
counted
Energy balance maximum
value counted
Input pulses maximum
energy value counted
Terminal characteristics
Current inputs
Voltage inputs
Impulsive outputs
Relay outputs
Overall dimensions
Weight [Kg]
Standards
Overall dimensions
Protection degree
Accuracy class
Electrical safety
User interface
Display Scrolling text in user-selectable language
Display type LCD with backlighting which can be set by user
Display dimensions [mm]
Communication interface
- Protocol
regulations
- Electrical standard
- Baud rate
- LED indicators Green for communication status and Red for communication error
- Address
- Connectors
Programmable electrical
parameters
Load
M2M
M2M network analyser has advanced analysis functions which allow effective measurement
of the main single-phase or three-phase electrical parameters: voltage, current, frequency,
power factor, active and reactive power, active and reactive energy.
2CSC4000060F0013
Fitted to low- and medium-voltage electrical panels (except for LV versions, suitable only for
low voltage applications), the new analyser allows the measurement and analysis in real time
of electrical parameters, also verifying the quality of the energy thanks to THD measure-
ment.
2
kg and Euros to
ensure more efficient and rational use of energy. Bidirectional metering of energy and power
on the 4 quadrants allows both production and consumption of energy to be monitored with
a single device.
Aside from optimising the use of loads, real time measurement contributes to containing
both environmental and budgetary impact.
All information gathered by the analyser can be transmitted quickly to remote locations
through specific communication interfaces (RS485, RJ45), with the support of numerous
protocols including Modbus RTU, Modbus TCP/IP and Profibus DP.
For interaction with control and supervision systems are available digital pulse outputs to
remotely control active and reactive energy consumption, digital outputs programmable as
threshold alarms with activation delay and return hysteresis, relay outputs with nominal cur-
rent up to 16 A, and analogue outputs with programmable span (0 - 20 mA or 4 - 20 mA) for
remoting status and events. Digital inputs allow pulse acquisition from other energy coun-
ters or users.
Modbus RTU
MODBUS
8/68 E L E C T R I C A L I N S TA L L AT I O N S O L U T I O N S F O R B U I L D I N G S 2CHC 000 002 C0201
—
Energy efficiency
Current transformers selection table
Breaker choice
Modular S200, S280, S290, S700, S750DR, S800
Tmax XT1, XT2, XT3, XT4, T4320 T5
Emax
Installation choice
Fixing DIN rail DIN rail DIN rail, cable or bus bar Bus bar DIN rail, cable or bus bar,
system base mounted with feet
T6,T7 T6,T7
E1.2, E2.2, E4.2 E2, E3, E4, E6 E2.2, E4.2, E6.2 E2.2, E4.2 E1.2
0,5
0,5
0,5
0,5
0,5
0,5
0,5
—
Energy efficiency
Current transformers selection table
Breaker choice
Modular S200, S280, S290, S700, S750DR, S800
Tmax XT1, XT2, XT3, XT4, T4320 T5
Emax
Installation choice
Fixing DIN rail DIN rail DIN rail, cable or bus bar Bus bar DIN rail, cable or bus bar,
system base mounted with feet
1250
1500
2000
2500
3000
4000
5000
6000
Primary choice
CTA TRF M CT PRO XT CT30 CT MA X
Wound primary Through primary Split core trough Through primary
primary
Through 8 29 18 18 – 30 30
primary – – 20x10 20x10 – 30x15; 40x10 30x15; 40x10
max
section – – – – 3x80x10 – –
[mm]
8/7 1
T6,T7 T6,T7
E1.2, E2.2, E4.2 E2, E3, E4, E6 E2.2, E4.2, E6.2 E2.2, E4.2 E1.2
—
Energy efficiency
CT measurement current transformers with through primary
Technical features
CTO TRFM
Standard secondary current [A]
2CSC400122F0201
Housing
Protection degree
Operating temperature [°C]
Max. temperature on bars [°C]
Storage temperature [°C]
Relative humidity
Reference standard
Secondary protection circuit
reference standards (only SELV
versions)
CT PRO XT
SELV
SELV
SELV
SELV
SELV
SELV
SELV
SELV
SELV
SELV
CT PRO XT
series
max sec-
Through primary
tion [mm]
cable 18
20x10
vertical bar -
8/74 E L E C T R I C A L I N S TA L L AT I O N S O L U T I O N S F O R B U I L D I N G S 2CHC 000 002 C0201
—
Energy efficiency
CT measurement current transformers with through primary
CT MAX series
max section
Through primary
[mm]
cable 30
30x15, 40x10
vertical bar -
8/75
CT6
CT8
2CSC400159F0201
—
Energy efficiency
CT measurement current transformers with through primary
CT12
CT12/V
—
Energy efficiency
CTA measurement current transformers with wound primary
CTA series
max sec-
Wound primary
tion [mm]
cable 8
vertical bar -
8/78 E L E C T R I C A L I N S TA L L AT I O N S O L U T I O N S F O R B U I L D I N G S 2 C H C 0 0 0 0 0 2 C0 2 0 1
—
Energy efficiency
CTO split core measurement current transformers
current
Iprim
A VA EAN Type code Order code piece kg pc.
CT80
CT120
bar
—
Energy efficiency
TRF M measurement modular current transformers
TRF M are modular current transformers with through primary for measuring instruments.
Their compact size and quick DIN rail plug allow easy installation along with great
measurement precision.
2CSC400522F0201