Professional Documents
Culture Documents
ENVPEP1710010EN_V1 11/2017
General information
Illuminated complete plastic unit with contact function. It combines simplicity of installation,
Description of the product
flexibility, and robustness. It meets the requirements of the majority of industrial applications.
Switch ON or OFF during 20 years the 10A electical contact with 50% use rate.
Functional unit
Constituent materials
Reference product mass 56 g including the product, its packaging and additional elements and accessories
PC Polycarbonate - 4.2%
Steel - 23.6%
PBT Polybutylene
Terephtalate - 9.7%
Copper - 5.7%
Silver - 0.1%
PA Polyamide - 35.7%
Cardboard - 14.8%
Paper - 0.1%
Electronic components - 1%Various - 1.8%
Substance assessment
Products of this range are designed in conformity with the requirements of the RoHS directive (European Directive 2011/65/EU of 8 June
2011) and do not contain, or only contain in the authorised proportions, lead, mercury, cadmium, hexavalent chromium or flame retardants
(polybrominated biphenyls - PBB, polybrominated diphenyl ethers - PBDE) as mentioned in the Directive
As the products of the range are designed in accordance with the RoHS Directive (European Directive 2002/95/EC of 27 January 2003),
they can be incorporated without any restriction in an assembly or an installation subject to this Directive.
Details of ROHS and REACH substances information are available on the Schneider-Electric Green Premium website
http://www2.schneider-electric.com/sites/corporate/en/products-services/green-premium/green-premium.page
ENVPEP1710010EN_V1 11/2017
Additional environmental information
The Complete Illuminated Plastic Button and Switch presents the following relevent environmental aspects
Weight and volume of the packaging optimized, based on the European Union's packaging directive
Distribution
Packaging weight is 8.5 g, consisting of cardboard (99.2%), Paper (0.8%)
End of life optimized to decrease the amount of waste and allow recovery of the product components and materials
This product contains Plastic parts with brominated FR (4.78g) that should be separated from the stream of waste so
as to optimize end-of-life treatment.
The location of these components and other recommendations are given in the End of Life Instruction document which
End of life is available on the Schneider-Electric Green Premium website
http://www2.schneider-electric.com/sites/corporate/en/products-services/green-premium/green-premium.page
Environmental impacts
The product is in ON mode 30% of the time with a power use of 0.5W and in OFF mode 70% of the time with
Use scenario
no power use, for 20 years
Geographical Europe
representativeness
Technological Illuminated complete plastic unit with contact function. It combines simplicity of installation, flexibility, and
representativeness robustness. It meets the requirements of the majority of industrial applications.
ENVPEP1710010EN_V1 11/2017
Compulsory indicators Complete Illuminated Plastic Button and Switch - XB5AW34B5
Impact indicators Unit Total Manufacturing Distribution Installation Use End of Life
Contribution to the soil and water acidification kg SO2 eq 5,61E-02 2,29E-03 3,30E-05 0* 5,37E-02 1,48E-05
3-
Contribution to water eutrophication kg PO4 eq 3,72E-03 4,63E-04 7,60E-06 5,69E-07 3,24E-03 4,36E-06
Resources use Unit Total Manufacturing Distribution Installation Use End of Life
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Contribution to Contribution to Contribution to Contribution to Contribution to Contribution to Net use of Total Primary
mineral the soil and water water global warming ozone layer photochemical freshwater Energy
resources acidification eutrophication depletion oxidation
depletion
Impact indicators Unit Total Manufacturing Distribution Installation Use End of Life
Resources use Unit Total Manufacturing Distribution Installation Use End of Life
Total use of non-renewable primary energy resources MJ 2,32E+02 6,93E+00 1,02E-01 0* 2,24E+02 7,12E-02
ENVPEP1710010EN_V1 11/2017
Use of non renewable primary energy excluding non
MJ 2,31E+02 6,17E+00 1,02E-01 0* 2,24E+02 7,12E-02
renewable primary energy used as raw material
* represents less than 0.01% of the total life cycle of the reference flow
Life cycle assessment performed with EIME version EIME v5.7.0, database version 2016-11.
The use phase is the life cycle phase which has the greatest impact on the majority of environmental indicators (based on compulsory
indicators).
Please note that the values given above are only valid within the context specified and cannot be used directly to draw up the environmental
assessment of an installation.
The elements of the present PEP cannot be compared with elements from another program.
Document in compliance with ISO 14025 : 2010 « Environmental labels and declarations. Type III environmental
declarations »