Professional Documents
Culture Documents
General information
The Prisma G is an assembled enclosures with busbars. It is designed to integrate and allow the
installation of electric devices such as Circuit breakers (MCCB & MCB), Switch disconnectors,
Description of the product
Fuse, Busbars for connection as per the customer requirement for a maximum current value of up
to 630.
It is an assembled enclosures with busbars. It is to protect persons during 20 years against direct
contact with live parts and allow monitoring, control and protection devices in a single enclosure or a
cabinet having the following dimensions 1230 x 600 x 250 mm. Continuous current pass through the
Functional unit
busbars for the devices to be connected. It can withstand mechanical impacts (IK08 - IEC62262)
and the penetration of solid objects and liquids (IP30 - IEC 60529) in accordance with IEC 61439-1
and 2 standards.
Constituent materials
Reference product mass 44000 g including the product, its packaging and additional elements and accessories
EPDM - <0.1%
Steel - 63.8%
Substance assessment
Products of this range are designed in conformity with the requirements of the RoHS directive (European Directive 2011/65/EU of 8 June
2011) and do not contain, or only contain in the authorised proportions, lead, mercury, cadmium, hexavalent chromium or flame retardants
(polybrominated biphenyls - PBB, polybrominated diphenyl ethers - PBDE) as mentioned in the Directive
As the products of the range are designed in accordance with the RoHS Directive (European Directive 2002/95/EC of 27 January 2003), they
can be incorporated without any restriction in an assembly or an installation subject to this Directive.
Details of ROHS and REACH substances information are available on the Schneider-Electric Green Premium website
http://www2.schneider-electric.com/sites/corporate/en/products-services/green-premium/green-premium.page
The PRISMA G WALL MOUNTED ENCLOSURE Up to 630A – IP30 presents the following relevent environmental aspects
The product does not require special installation procedure and requires little to no energy to install. The disposal of the
Installation
packaging materials are accounted for during the installation phase (including transport to disposal).
End of life optimized to decrease the amount of waste and allow recovery of the product components and materials
No special end-of-life treatment required. According to countries’ practices this product can enter the usual end-of-life
End of life treatment process.
Based on “ECO’DEEE recyclability and recoverability calculation method”
Recyclability potential: 84% (version V1, 20 Sep. 2008 presented to the French Agency for Environment
and Energy Management: ADEME).
Environmental impacts
Use scenario Product dissipation is 3.53 W, loading rate is 30% and service uptime percentage is 100%
Geographical
Europe
representativeness
The Prisma G is an assembled enclosures with busbars. It is designed to integrate and allow the installation of
Technological
electric devices such as Circuit breakers (MCCB & MCB), Switch disconnectors, Fuse, Busbars for
representativeness
connection as per the customer requirement for a maximum current value of up to 630.
Impact indicators Unit Total Manufacturing Distribution Installation Use End of Life
Contribution to the soil and water acidification kg SO2 eq 3.23E+00 4.30E-01 3.82E-02 0* 2.76E+00 1.18E-02
Contribution to water eutrophication kg PO43- eq 2.72E-01 1.50E-01 8.82E-03 6.96E-03 1.04E-01 2.93E-03
Contribution to global warming kg CO2 eq 5.74E+02 1.91E+02 8.28E+00 5.06E+00 3.65E+02 4.51E+00
kg CFC11
Contribution to ozone layer depletion 1.00E-04 1.12E-05 1.68E-08 0* 8.87E-05 2.50E-07
eq
Contribution to photochemical oxidation kg C2H4 eq 1.89E-01 5.47E-02 2.74E-03 2.75E-04 1.31E-01 1.27E-03
Resources use Unit Total Manufacturing Distribution Installation Use End of Life
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
Contribution to Contribution to Contribution to Contribution to Contribution to Contribution to Net use of Total Primary
mineral resources the soil and water water global warming ozone layer photochemical freshwater Energy
depletion acidification eutrophication depletion oxidation
Impact indicators Unit Total Manufacturing Distribution Installation Use End of Life
Resources use Unit Total Manufacturing Distribution Installation Use End of Life
Total use of renewable primary energy resources MJ 6.25E+02 9.86E+01 1.56E-01 0* 5.29E+02 6.61E-02
Total use of non-renewable primary energy resources MJ 1.20E+04 6.13E+03 1.11E+02 0* 5.77E+03 5.74E+01
Waste categories Unit Total Manufacturing Distribution Installation Use End of Life
Other environmental information Unit Total Manufacturing Distribution Installation Use End of Life
* represents less than 0.01% of the total life cycle of the reference flow
Life cycle assessment performed with EIME version EIME v5.5, database version 2015-04.
The use phase is the life cycle phase which has the greatest impact on the majority of environmental indicators (based on compulsory
indicators).
Please note that the values given above are only valid within the context specified and cannot be used directly to draw up the environmental
assessment of an installation.