Headquarters: 159 Park Hill Blvd, W. Melbourne, FL 32904 USA Phone (321) 984-9777, Fax (321) 984-1022
Description: Benefits: Primer:
Acousti-Coat is heavy bodied, • Fast drying Surfaces should be first primed
water-based, flat latex paint • Dampens ringing and with a 100% acrylic primer, formulated with ceramic tinning noise in metal such as Hy-Tech’s Aqua Prime microspheres and sound structures absorbing fillers. • Environmentally friendly Application: The combination of a high and non-toxic loading of ThermaCels™ with • Easily cleaned with soap Areas that will be covered their vacuum centers reduces and water must be thoroughly cleaned sound transmission; the soft • The small texture helps to and dried before applying pigment fillers absorb sound hide minor surface defects Acousti-Coat. and prevent it from bouncing such as drywall joints, For best results, apply two thin off the surface. Noise reduction dings and dents. layers. Allow to dry in in the 500Hz (500Hz is mid • Can be tinted light to mid- between coats. frequency of the human voice) range colors; if the desired Roller application: We is reduced by 30%!! color is too dark, you may recommend using a 3/4"to Acousti-Coat is for use on paint over Acousti-Coat 1-3/4" interior surfaces such as with an inexpensive, flat, Spray application: drywall, ceilings and walls, latex paint. Drywall “Hopper” with 30-40 plaster, primed metal and psi air pressure. • High resistance to heat wood. This product is an When spraying, however, it is transfer inexpensive, easy-to-apply recommended that the first • Can be applied by brush, surface coating with superior coat be back-rolled to insure roller or spray (use a sound absorbing properties, as adhesion and crack filling. hopper spray gun) compared to conventional • VOC levels of 3 grams per Acousti-Coat covers roughly paints. liter 100-150 square feet per gallon. Acousti-Coat not only reduces the transmission of sound, but due to the heavy concentration of ThermaCels™, it also KEEP FROM FREEZING provides a highly reflective Do not apply when heat barrier to the painted temperatures are below 50°F. surface. This reduces heat Coatings should only be intrusion into the adjoining applied when ventilation is rooms. adequate.
CAUTION! KEEP OUT OF REACH OF CHILDREN.
DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. These suggestions and data are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of this product are beyond our control. Neither Hy-Tech Thermal Solutions, LLC nor our agents shall be responsible for the use or results of use of this product or any procedures or apparatus mentioned. We recommend that the prospective user determine the suitability of the product for each specific project and for the health and safety of personnel working in the area. For information on safety hazards associated with this product please refer to MSDS sheets.