Professional Documents
Culture Documents
FSB 05 Cata 2008
FSB 05 Cata 2008
Designer Series
Lockset Program
Accessories
Window Handles
Door Closers
Components
Installation Instructions
Specialty Applications
Sliding Door Hardware
About FSB 4
New Products 5
Overview 10
Passage Doors
2000s
FSB introduces a limited range This is FSB’s fourth edition for
of levers supplied in complete the North American market. It
locksets to the Amercian design represents a huge step foward
community. The first catalog to offer a complete program
was approximately 80 pages. which brings design consistency
Two later catalogs increased across more openings and ap-
FSB’s North American offering plications.
to nearly 100 lever designs. This catalog is seperated into
In 2007, FSB expanded the different sections, tailored to
North American distribution your specific needs.
center, moving it to Madison, For the latest information
CT, where the majority of prod- please go to www.fsbna.com.
ucts are stocked in natural
anodized aluminum and satin
stainless steel. Stock items can
be shipped in 48 hours. All non-
stock items can be shipped
within two to eight weeks re-
gardless of the product type,
finish or project size.
4
New Products
METRIC Bath Accessories Sliding Door Hardware Bronze Glass Door Hardware
FSB has dedicated an entire Building owners are demanding There is an increase in an “old Creating more open spaces
section to a well designed range more efficient use of space. meets new aesthetic” in which has become a cornerstone of
of bathroom accessories in solid Consequently, architects and designers are combining tradi- modern architecture. Utilizing
stainless steel. The design designers are utilizing many tional finishes with more mini- large pieces of glass, whether
principle is based on a minimal more sliding and pocket doors. mal and modern design. For for windows, doors, or walls,
rectangular post centered on a In recognition of this trend years, FSB has offered ten of facilitates this objective.
small round escutcheon. FSB has developed an entire our best selling handles in solid FSB has broadened its glass
range of flush mounted trim for brass, either polished or oxidized door program to include locks
passage, privacy and entry to give them varying degrees of and hinges for swinging glass
applications. We demonstrate antiquing to suit the designers’ doors as well as exposed rolling
our penchant for divising needs. gears for sliding glass doors.
aesthetically pleasing technical FSB now introduces Bronze These products can be found in
solutions by offering the mar- as a new material for our lever the section “Door Pulls and
ket’s first flush pulls with spring handles and accessories. The Glass Door Hardware”.
loaded covers, as pictured special appeal of bronze is the
above. patina that develops on its sur-
A complete overview of these face. In the course of daily use,
products is provided in the polished bronze parts darken
“Sliding Door Hardware” naturally, becoming more distin-
section. guished with time.
We have created a complete
section titled “Brass and Bronze
Products” to cover all the
products we offer in these two
exceptional base materials. We
offer eight bronze handles and
ten brass handles for projects
that may benefit from this “old
meets new” aesthetic. All brass
and bronze products can be
oxidized to varying degrees of
darkness, depending on “the
mood” a designer would like to
create.
5
Materials
and Finishes
Most of our hardware is available To confirm a particular finish is On overview pages, and all pages If, by exception, a specific finish
in aluminum and stainless steel available, consult the bottom of throughout this catalog, only the is not available for a given base
as a base material. the lever pages. base material is indicated. It material, it will be stated by the
We offer up to five finishes on can be assumed that all finishes detail page for that product.
certain base materials with twen- shown to the right of the base
ty finishes overall. Aluminum material below are available
is either anodized or powder whenever a base material is
coated. indicated for a product.
6
Aluminum
0105 8220
Aluminum Aluminum Powder
Natural Color Coated White
Anodized approx. RAL 9003
0205 8320
Aluminum Aluminum Powder
German Silver Coated Red
(Champagne) Color approx. RAL 3002
Anodized
0305 8120
Aluminum Aluminum Powder
Brass Color Coated Black
Anodized approx. RAL 9004
0405
Aluminum
Bronze Color
Anodized
0704
Aluminum
Dark Bronze Color
Anodized
7
AluGrey Stainless Steel
1005 6204
AluGrey Satin
Stainless Steel
6205
Mirror Polished
Stainless Steel
6206
Matte
Stainless Steel
6210
Stainless Steel
in Brass Color PVD
8
Bronze Brass
7305 4205
Bronze Polished Brass Polished
Oil Rubbed Lacquered
7615 4305
Bronze Artificially Brass Polished
Aged and Oil Oil Rubbed
Rubbed
7625 4694
Bronze Patinated Oxidized Brass
and Oil Rubbed Lacquered
4404
Oxidized Brass
Oil Rubbed
9
Base Material
FSB North American Aluminum
Sliding Door Stock Items (stocked
in Natural Color
Stainless Steel
Bronze
Hardware Aluminum and Satin
Stainless Steel) Brass
SS 7000 SS 7001 SS 7002 4210 9000 4210 9001 4210 9002 4210 9003
4203 4204 4204 9001 4299 4299 7000 0270 7000 0271
10
Flush Pulls for FSB North American Stock Items
45 19
4250
Aluminum
Stainless Steel
25 2
39
4250 0001
Aluminum
Stainless Steel
45 19
4251
Aluminum
Stainless Steel
25 2
39
4251 0001
Aluminum
Stainless Steel
11
Flush Pulls for
Passage Doors
54 19
4252
Aluminum
75 Stainless Steel
Flush Pull
2
4252 0001
Aluminum
Stainless Steel
50 19
4253
Aluminum
70 Stainless Steel
Flush Pull
2
4253 0001
Aluminum
Stainless Steel
12
Flush Pulls for FSB North American Stock Items
18,5
30
4254
50 Aluminum
Stainless Steel
1,5
Flush Pull
4254 0001
Aluminum
Stainless Steel
36 12
4213
Aluminum
Stainless Steel
105
Flush Pull
13
Flush Pulls for FSB North American Stock Items
40 11,5
4211
Aluminum
Stainless Steel
120 Bronze
Brass
Flush Pull
1,5
Boreholes for 3.0 mm
countersunk screws
40 11,5
4212
Aluminum
Stainless Steel
120 Brass
Flush Pull
14
FSB North American Stock Items
1 31⁄ 32"
(50)
x
4299 00xx
3 ⁄ 32"
Stainless Steel
(3)
3 31⁄32" 2 3 ⁄ 16"
(101) (55) xx = 23 (1 3⁄8" Door Thickness)
1 9 ⁄ 16" xx = 25 (1 3⁄4" Door Thickness)
(40)
Square corners
13 ⁄ 32" (10)
1 31⁄ 32"
(50)
x
4299 00xx
3 ⁄ 32"
Stainless Steel
(3)
3 31⁄32" 2 3 ⁄ 16"
(101) (55) xx = 22 (1 3⁄8" Door Thickness)
1 9 ⁄ 16" xx = 24 (1 3⁄4" Door Thickness)
(40)
Radius corners
13 ⁄ 32" (10)
15
Flush Pulls for FSB North American Stock Items
2 5⁄ 16"
(59)
1 25⁄ 32"
4210 9000
(45) Aluminum
Stainless Steel
Passage
6 31 ⁄ 32" 5 1 ⁄ 8"
(177.5) (130.5)
6 7⁄ 16" 5 5 ⁄ 8"
(163.5) (143)
1 11 ⁄ 16"
(42.5)
2 3 ⁄ 16"
(55)
13 ⁄ 32" 11 ⁄ 32"
(10.5) (8.5)
2 5⁄ 16"
(59)
1 25⁄ 32"
4210 9001
(45) Aluminum
Stainless Steel
Cylinder Hole
6 31 ⁄ 32" 5 1 ⁄ 8"
(177.5) (130.5)
6 7⁄ 16" 5 5 ⁄ 8"
(163.5) (143)
1 11 ⁄ 16"
(42.5)
2 3 ⁄ 16"
(55)
13 ⁄ 32" 11 ⁄ 32"
(10.5) (8.5)
16
Flush Pulls for FSB North American Stock Items
2 5⁄ 16"
(59)
1 25⁄ 32"
4210 9002
(45) Aluminum
Stainless Steel
Thumbturn
6 31 ⁄ 32" 5 1 ⁄ 8"
(177.5) (130.5) With 5 mm diamond spindle
6 7⁄ 16" 5 5 ⁄ 8"
(163.5) (143)
1 11 ⁄ 16"
(42.5)
2 3 ⁄ 16"
(55)
13 ⁄ 32" 11 ⁄ 32"
(10.5) (8.5)
2 5⁄ 16"
(59)
1 25⁄ 32"
4210 9003
(45) Aluminum
Stainless Steel
Privacy Set
6 31 ⁄ 32" 5 1 ⁄ 8"
(177.5) (130.5) With 5 mm diamond spindle
6 7⁄ 16" 5 5 ⁄ 8"
(163.5) (143)
1 11 ⁄ 16"
(42.5)
2 3 ⁄ 16"
(55)
13 ⁄ 32" 11 ⁄ 32"
(10.5) (8.5)
17
Standard Sliding Door Lock Series SS
Information and Specifications
SS Series Sliding Door Lock 7001 Pocket Door Lock 7002
(Page 20) (Page 21)
A premium quality heavy duty The SS Series thumbturn hubs Steel Case Steel Case
commercial grade sliding pocket are fabricated of oil impregnated, Size varies according to backset. Size varies according to backset.
door lock/pull series compatible copper infiltrated sintered steel, Heavy gauge .093" (2.36 mm) Heavy gauge .093" (2.36 mm)
with an array of FSB Sliding Door for additional strength. Heavy thick, corrosion resistant zinc thick, corrosion resistant zinc
Trim. Locks are available as a gauge cases are designed to dichromate finish. dichromate finish.
2 1⁄2" and 2 3⁄4" backset. accommodate FSB trim for posi-
tive alignment with the lock case. Armor Front and Scalp Armor Front and Scalp
The SS Series locks incorporate .188" × 1" × 5.50" .188" × 1" × 8"
a standard 1" wide faceplate Deadbolts are fabricated from (4.8 × 25.4 × 140 mm). (4.8 × 25.4 × 203 mm)
and are designed for doors 1 3⁄4" solid brass with stainless steel
thick and greater. The SS Series hooks. Faceplate (Scalp only) Faceplate (Scalp only)
pull has a standard 7⁄8" wide .062" × 1" × 5.50" .062" × 1" × 8"
faceplate. Faceplates and strikes are fabri- (1.57 × 25.4 × 140 mm). (1.57 × 25.4 × 203 mm).
cated standard in non-magnetic Wrought stainless steel, bronze Wrought stainless steel, bronze
Locks are available in a variety of 304 alloy stainless steel. Brass or brass substrate. Finish as or brass substrate. Finish as
keyed and non-keyed functions. or bronze substrates and most required. required.
decorative finishes may be ob-
tained on a special order basis. Deadbolt Deadbolt
.50" × 1.218" (12.7 × 31 mm) × .50" × 1.218" (12.7 × 31 mm) ×
All FSB sliding locks are com- 1" (25.4 mm) throw. 1" (25.4 mm) throw.
patible with most US cylinders. Machined solid brass with Machined solid brass with
When using other brands of stainless steel hooks. stainless steel hooks.
cylinders, they must be supplied
with an FSB compatible clover Thumbturn Hub Pull
leaf cam. .2" (5 mm) diamond. Oil im- .50" × 2" (12.7 × 50.8 mm) ×
pregnated, copper infiltrated 1.25" (32 mm) throw.
sintered steel, 90 degree rotation. Machined solid brass.
18
Spring Loaded Edge Pull FSB North American Stock Items
7⁄ 8"
(22) 3 1 ⁄ 32" (77)
13 ⁄ 16"
SS 7000
(21)
Spring Loaded Edge Pull
13 ⁄ 16" (21)
3 ⁄ 16" (4.8)
Steel Case
Size varies according to backset.
Heavy gauge .093" (2.36 mm)
thick, corrosion resistant zinc
dichromate finish.
Pull
.50" × 2" (12.7 × 50.8 mm) ×
1.25" (32 mm) throw.
Machined solid brass.
19
Sliding Door Lock for FSB North American Stock Items
1" (25.4) x
7⁄ 8"
(22) SS 7001
1 21 ⁄ 32"
(42)
Backsets (x)
1 3 ⁄ 16" 2 1⁄2" (64 mm)
5 1 ⁄ 2" 4 3 ⁄4" (30) 4"
(140) (120.6) (101.6) 2 3⁄4" (70 mm)
SS 7001 P
Key × Thumbturn Deadlock Set
SS 7001 R
Thumbturn Deadlock Set
SS 7001 S
Thumbturn Deadlock with
Emergency Release Set
20
Sliding Door Lock with FSB North American Stock Items
SS 7002
7⁄ 8"
1" (25.4) x
(22)
1 21 ⁄ 32"
(42)
Backsets (x)
1 3 ⁄ 16"
(30)
2 1⁄2" (64 mm)
2 3⁄4" (70 mm)
8" 7 1 ⁄4" 6 9 ⁄ 16"
(203) (184) (167) For 1 3⁄4" or greater door
thickness.
7⁄ 32" (5.5)
SS 7002 P
Key × Thumbturn Deadlock Set
SS 7002 R
Thumbturn Deadlock Set
SS 7002 S
Thumbturn Deadlock with
Emergency Release Set
21
Flush Ring Handles for FSB North American Stock Items
90 12
4203
Aluminum
90 72
European sliding door locks with
8 mm Δ spindle as standard.
72
70 11
4204
Aluminum
70 54
70 11
4204 9001
Aluminum
70 54
70 54
54
22
Sliding Door Trim for FSB North American Stock Items
35 35
7000 0270
Aluminum
Stainless Steel
35 35
7000 0271
Aluminum
Stainless Steel
278 265
150
36 55
23
Lift Slide FSB North American Stock Items
35 17
4215 00
52,5 Stainless Steel
80 95
69
155 Flush pull without keyhole
25 3
35 17
4215 02
52,5 Stainless Steel
80 95
69
155 Flush pull with PZ-keyhole
25 3
35 17
4215 10
Stainless Steel
80 95 105
Flush pull without keyhole
25 3
24
Lift Slide FSB North American Stock Items
52
3750 11xx
Stainless Steel
50
3750 12xx
Stainless Steel
25
Roller-guided
Sliding Door Gears
Product information for sliding Misuse Product Performance Duty of Information and
door gears Instructions
In accordance with the defini- Misuse – in other words use in a In cases where the performance The following sources of infor-
tion of the liability of manufac- manner not in accordance with of the product is not specifically mation are available to plan-
turers for their products set out the intended purpose – can be described in the catalogues, ners, specialist dealers, admin-
in § 4 of the “Produkthaftungs- said to occur in the following brochures, instructions etc., istrative personnel, building
gesetz” (German Manufactur- cases in particular: special requirements must be contractors and users by way of
er’s Liability Law), the following discussed with and agreed by fulfillment of the duty of infor-
information on sliding door gear · if the gear is used with a high- the manufacturer. Our regula- mation and instruction:
should be observed. Failure to er max. load than specified in tions, which affect the composi-
do so absolves the manufactur- the catalogue and in the other tion of the sliding door gear, are · catalogues, brochures
er from liability. product documents, binding. · quotations, descriptions of offer
· if incorrectly installed or at- · mounting and installation
tached, drawings, maintenance and
Product information and use in · if ambient temperatures are Product Maintenance operation instructions.
accordance with intended pur- too high or too low,
pose · if particularly aggressive media Components of sliding door gear In order to ensure correct use,
can affect the gear, which are relevant to safety must proper functioning and mainte-
Sliding door gear, according to · if subjected to inordinately be regulary inspected for proper nance and care of sliding door
this definition, are fittings for great pushing or pulling loads, fixing and signs of wear. Fixing gear,
doors and other push-able ele- · if the position of the track screws are to be re-tightened
ments, henceforth called objects, deviates too greatly from the and faulty components must be · architects and planners must
which are not normally moved horizontal, replaced. In addition, the follow- request and apply the neces-
faster than walking pace. Slid- · if foreign bodies get into the ing maintenance work must be sary product information,
ing door gear is used in vertical- track, carried out at least once a year: · specialist dealers must take
ly fitted doors made of wood, · if the rollers are operated too account of the product infor-
plastic, glass, aluminum or steel fast, · All moving parts are to be test- mation and notes in the price
and appropriate combinations · if alterations are carried out ed for free movement. lists, and in particular must re-
of these materials. A floor guide without the manufacturer’s · In the case of running car- quest all necessary instruc-
is provided at the lower horizon- authorization, riages with metal rollers, the tions and pass these on to the
tal edge of the door. Special ver- · if obstacles are placed in the moving parts must be greased installation personnel,
sions of products must be spec- opening or between the door (type of grease to be used on · installation personnel must
ified for damp rooms, direct or the object thereby prevent- request). Plastic rollers must take account of all product
exposure to the elements, expo- ing intended use, not be greased. information, and in particular
sure to cross winds, for installa- · if additional loads act upon the · Only use cleaning agents must request operating and
tion near the sea and in highly door or object, which do not impair the anti- maintenance instructions and
corrosive conditions. · if someone is trapped between corrosion protection of the pass these on to the ordering
Correct installation by quali- the door and the door frame gear. party and the user.
fied personnel is a particularly while the door is being pushed · Faulty sliding door gears must
important aspect of use for in- or closed, or if a person or part be replaced.
tended purpose. The object of the body is in this area. · Adjustment work on the gears
must be sufficiently rigid at all and the replacement must be
of these points. The function of carried out by qualified per-
the gear must not be hindered sonnel.
or altered by installation. A
buffer must be used in order to
limit the displacement path.
26
Categorization according
to DIN EN 1527:1998
Category of the application (1st number) Initial friction (9th number)
There is no category of application fixed.
There are three classes existing:
Duration of the operability (2nd number)
· Class 1 = 2,500 cycles Door weight
· Class 2 = 5,000 cycles up to 50 kg 51– 100 kg 101– 330 kg >330 kg
· Class 3 = 10,000 cycles 110 lbs 112–220 lbs 222–726 lbs >726 lbs
· Class 4 = 25,000 cycles
· Class 5 = 50,000 cycles Class 1 50 N 80 N 100 N 5% of door
· Class 6 = 100,000 cycles weight
27
Top Mounted System
8820
Description ID No.
· for toughened
safety glass 8 mm 121003
· for toughened
safety glass 10 mm 121004
· for toughened
safety glass 12 mm 121005
The high quality stainless steel · For every glass strength (ESG Table glass strength ESG (toughened safety glass)
sliding door gear for glass doors 8/10/12 mm) there is a preci-
are the visible combination of sion-floor guide available. It for wall mounting
functionality and appealing consists of wear-free felt and
design. therefore it is extremly noise- Dim. 8 mm 10 mm 12 mm
The system is suitable for wall less A 13.0 mm 11.0 mm 9.0 mm
as well as ceiling installation · High quality plastic bearing B 7.5 mm 5.5 mm 3.5 mm
and therefore it is usable in surfaces of the rollers for ex- C 24.0 mm 26.0 mm 28.0 mm
various building situations. treme quiet running with a
minimum energy expenditure
for ceiling mounting
28
8820
Installation for wall mounting
Ø 58.5 42.5 17.5
Ø 50
min.
75
Digging safety device
adjustable via excenter screw
Ø 25
51
A 20
B 50
100 60
Recommendation Clear
height Ø 35 Ø 16
LH
30
70 Glass thickness 8/10/12 mm
20
7 Floor guides made of stainless steel
566 150 C
Ø 40
M8
Ø 58.5
42.5
89
110 120
Digging safety device
adjustable via excenter screw
Ø 25
±4
Ø 20
34 50
100 60
Recommendation
Ø 35 Ø 16
30
70 Glass thickness 8/10/12 mm
20
7 Floor guides made of stainless steel
566 150 A
Ø 40 B
29
Floor Mounted System
8821
Description ID No.
30
8821
Installation drawing
20 (± 3) 20 (± 3) ca. 4 10 20 (± 3)
21 ca. 40
R8
32 Track
ca. 11 fixing with screws
3 Glass cutout 3 or adhesive
10
Ø 40 Ø 16 Ø 69.5
30
9 7
min. 40 min. 40 25
60 ca. 250 60
31