Professional Documents
Culture Documents
Sfh617a 3X007T
Sfh617a 3X007T
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability,
5300 VRMS, 110 °C Rated
FEATURES
• Operating temperature from -55 °C to +110 °C
• Good CTR linearity depending on forward current
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 70 V
• Low saturation voltage
A 1 4 C
• Fast switching times
• Low CTR degradation
C 2 3 E • Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
17918-20
APPLICATIONS
DESCRIPTION
• AC adapter
The 110 °C rated SFH617A (DIP) feature a high current
• SMPS
transfer ratio, low coupling capacitance and high isolation
voltage. These couplers have a GaAs infrared diode emitter, • PLC
which is optically coupled to a silicon planar phototransistor • Factory automation
detector, and is incorporated in a plastic DIP-4 package. • Game consoles
The coupling devices are designed for signal transmission
between two electrically separated circuits. AGENCY APPROVALS
The couplers are end-stackable with 2.54 mm spacing. The safety application model number covering all products
Creepage and clearance distances of > 8.0 mm are in this datasheet is SFH617A. This model number should be
achieved with option 6. used when consulting safety agency documents.
• UL1577, file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5) available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO
• CQC
ORDERING INFORMATION
DIP-4 Option 6
S F H 6 1 7 A - # X 0 # # T
7.62 mm 10.16 mm
PART NUMBER CTR PACKAGE OPTION TAPE
BIN AND Option 7 Option 9
REEL
> 8 mm 8 mm typ.
R G = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Oscilloscope
R L ≥ 1 MΩ
Channel II
C L ≤ 20 pF
50 Ω 1 kΩ
95 10843
Tamb = - 40 °C 1000
1.3
Tamb = - 55 °C
1.2 100 VCE = 24 V
1.1 10 VCE = 12 V
Tamb = 50 °C
1.0 1
Tamb = 75 °C
0.9
Tamb = 100 °C 0.1
0.8
Tamb = 110 °C
0.7 0.01
0.6 0.001
0.1 1 10 100 - 60 - 40 - 20 0 20 40 60 80 100 120
IF - Forward Current (mA) Tamb - Ambient Temperature (°C)
Fig. 4 - Forward Voltage vs. Forward Current Fig. 7 - Leakage Current vs. Ambient Temperature
90 1.4
IF = 30 mA VCE = 5 V
80 CTRNorm - Normalized CTR (NS) 1.2 IF = 5 mA
IC - Collector Current (mA)
70 IF = 20 mA
1.0
60 IF = 10 mA
IF = 15 mA
50 0.8
40 IF = 10 mA 0.6
30 IF = 1 mA
0.4
20 IF = 5 mA
0.2
10
0 0
0 1 2 3 4 5 6 7 8 - 60 - 40 - 20 0 20 40 60 80 100 120
VCE - Collector Emitter Voltage (NS) (V) Tamb - Ambient Temperature (°C)
Fig. 5 - Collector Current vs. Collector Emitter Voltage (NS) Fig. 8 - Normalized CTR (NS) vs. Ambient Temperature
30 1.4
IF = 25 mA IF = 5 mA VCE = 0.4 V
CTRNorm - Normalized CTR (sat)
25 1.2
IC - Collector Current (mA)
1.0
20 IF = 10 mA
IF = 10 mA
0.8
15
0.6
IF = 5 mA IF = 1 mA
10
0.4
5 IF = 2 mA 0.2
IF = 1 mA
0 0
0 0.1 0.2 0.3 0.4 - 60 - 40 - 20 0 20 40 60 80 100 120
VCE - Collector Emitter Voltage (sat) (V) Tamb - Ambient Temperature (°C)
Fig. 6 - Collector Current vs. Collector Emitter Voltage (sat) Fig. 9 - Normalized CTR (sat) vs. Ambient Temperature
1.4 1000
VCE = 10 V VCC = 5 V
CTRNorm - Normalized CTR (NS)
1.2
0 1
0.1 1 10 100 0.1 1 10 100
IF - Forward Current (mA) IC - Collector Current (mA)
Fig. 10 - Normalized CTR (NS) vs. Forward Current Fig. 13 - CTR Frequency vs. Collector Current
1.4 1000
VCE = 0.4 V VCE = 5 V, IF = 10 mA
CTRNorm - Normalized CTR (sat)
1.2
ton, toff - Switching Time (μs)
Tamb = 25 °C Tamb = 50 °C toff
Tamb = 0 °C Tamb = 75 °C 100
1.0
Tamb = - 40 °C
0.8
Tamb = - 55 °C 10
0.6
ton
0.4 Tamb = 100 °C
1
0.2 Tamb = 110 °C
0 0.1
0.1 1 10 100 0.1 1 10 100
IF - Forward Current (mA) RL - Load Resistance (kΩ)
Fig. 11 - Normalized CTR (sat) vs. Forward Current Fig. 14 - Switching Time vs. Load Resistance
0
VCE = 5 V
- 20
- 40
Phase (deg)
- 60
- 80
- 100
- 120
- 140
1 10 100 1000
f - Frequency (kHz)
4 3
1 2
0.85 ± 0.1
3.5 ± 0.3
0.5 typ.
0.5 ± 0.1
+ 0.25
3.5 ± 0.3 0.35 - 0.3 3.5 ± 0.3 0.1 ± 0.1 3.5 ± 0.3
0.1 min.
8 min. 0.6 min.
2.7 min.
0.6 min. 8.16 ± 0.8
10.16 ± 0.3 10.16 ± 0.3
10.16 typ.
2.54
2.54
0.76
0.76
R 0.25 R 0.25
1.78
20802-28 11.05 11.05
PACKAGE MARKING
SFH617A-3
V YWW 25
Notes
• VDE logo is only marked on option 1 parts. Option information is not marked on the part.
• Tape and reel suffix (T) is not part of the package marking.
0
0 50 100 150 200 250
94 8626 Time (s)
300
max. 260 °C
250 255 °C
240 °C 245 °C
217 °C
Temperature (°C)
200
max. 30 s
150
max. 120 s max. 100 s
100
max. ramp down 6 °C/s
0
0 50 100 150 200 250 300
17918-20
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.