Professional Documents
Culture Documents
419-01B-Anti-Theft - Passive 419-01B
419-01B-Anti-Theft - Passive 419-01B
GENERAL PROCEDURES
Key and Remote Transmitter Programming Using Diagnostic Equipment......................... 419-01B-7
Anti-Theft Security Access.................................................................................................. 419-01B-8
Erasing One or More Key Codes Using Diagnostic Equipment......................................... 419-01B-9
Anti-Theft - Passive
Component location
1 2
E68649
Item Description
1 Passive anti-theft (PATS) transponder Operation
2 PATS transceiver PATS
The PATS is a passive system designed to
increase the anti-theft security of the vehicle.
Anti-Theft - Passive
Refer to Wiring Diagrams Section 419-01B, for
Visual Inspection Chart
schematic and connector information.
Mechanical Electrical
General Equipment
Worldwide Diagnostic System (WDS) – Ignition lock cylinder – Fuse(s)
– Passive anti-theft – Wiring harness
system (PATS) igni- – Electrical
Inspection and Verification tion key connector(s)
– Use of a non- – Relay(s)
1. Verify the customer concern. encoded PATS igni-
– CJB
2. Visually inspect for obvious signs of mechanical tion key
or electrical damage. – PCM
– More than one
PATS key in close – PATS transceiver
proximity of the – Ignition switch
PATS transceiver – Instrument cluster
– Central junction box
(CJB)
– Powertrain control
module (PCM)
– Instrument cluster
Removal
NOTE: This procedure will not erase programmed
ignition keys from the passive anti-theft system
(PATS).
1.
E69322
2.
x2
E69323
3.
E69785
Installation
1. To install, reverse the removal procedure.