Professional Documents
Culture Documents
A01-10-O
GV_ _
Glycerin Bath Type
Pressure Gauge
Overview
This stainless-steel enclosed pressure gauge is filled with
liquid to protect moving parts preventing from wear of
built-in link mechanism cause by vibration. This long life
pressure resistant gauge is suitable for the use where
vibration always presents.
Features
・Stainless steel wetted parts and case improve
corrosion resistance and environmental resistance.
GV42
・It features blowout disk in case of event when bourdon
(φ100)
tube breaks while monitoring preventing from beak of
window.
・φ60 and φ75 pressure gauge can feature safety mark
with arrow figure indicating target or limit of pressure
value. GV50
・Dry type available without glycerin filled. (φ60)
*To maximize performance, select full scale pressure range to indicate
*Zero box is standard for φ60 and φ70.
normal operating pressure which comes to conditions below.
For constant pressure : The maximum operating pressure should not *Picture shows φ60 JIS Grade 1.6 dial scale gauge
exceed three-quarters of the full-scale range.
For fluctuating pressure: The maximum operating pressure should not
exceed two-thirds of the full-scale range. ! Caution
Select appropriate wetted parts compatible with process fluid (gas and This gauge is prohibited to use in application in oxygen,
liquid) which the gauge will be subjected. chlorinate, nitric acid, or hydrogen peroxide water service.
Please refer to JIS B 7505-1 for details. The gauge can be exploded in the event of leak of filled glycerin
chemically reacting with prohibited medias.
*Option includes Daifloil for stabilized filling fluid against oxidizing
agent. Ensure the fill of this liquid when the pressure gauge would
be exposed to oxygen, chlorinate, nitric acid, or hydrogen peroxide
water.
Specifications 1
Media: Operating temperature:
Gases, liquids -5 to 45℃
Size: Accuracy:
φ60, φ75, φ100, φ150 ±1.5%F.S.
*Available ±1.0%F.S. accuracy only for φ100 and φ150
Type:
Stem‥‥ A type B type (Mounting hole) Window:
Selectable organic or tempered (organic)
Treatment: (Option)
Panel‥‥ D type (Mounting clamp, Direct mount
Use no oil and water ‥‥ Oil/Water used in manufacturing
available for φ60)
the gauges had been flushed out
& no oil/water residue remained
Connection:
inside its wetted parts.
G1/4B, G3/8B, G1/2B, 1/4NPT, 1/2NPT,
R1/4, R3/8, R1/2 Customized dial: (Option)
*Consult us for nonstandard connections. Capacity scale, dual scale, characters and circled dial
JIS Grade 1.6 dial scale available
Wetted parts:
Bourdon tube・Socket SUS316 Enclosure rating:
*Available SUS316L only for φ100 Equivalent to IP65
(Pulled vent plug down for 1MPa and below. IP44 for pulled vent plug up)
Case material・finish:
SUS304・Not polished Weight:
φ60 Approx. 0.3kg, φ75 Approx. 0.4kg
Pressure range:
φ100 Approx. 1kg, φ150 Approx. 2.5kg
0 to 0.1MPa→0 to 100MPa
-0.1 to 0MPa→-0.1 to 2MPa
*Available up to 200MPa for φ100(SUS316 wetted parts)
GV□□
Glycerin Bath Type Pressure Gauge
Specifications 2
Filling liquid:
Filling liquid: Glycerin (Aqueous glycerin solution for 0.4MPa and below, and compound 0.4MPa range.)
For oxidizing agent application: Fluorine type oil (Daifloil○R ) (Option for GV42/GV47)
*Case sealing part: Fluororubber (Gasket・Blowout disk)
! Caution
Rubber gasket is used for preventing leakage of filled liquid (glycerin).
Glycerin does not dissolve or swell the rubber gasket but additive may possibly soak out in a long time
use causing slight discoloration of glycerin.
Discoloration of glycerin does not affect the function of gauges.
Safety window
Transportation When using
*Pull vent plug down when leak of glycerin is considerable, or outdoor use or place in high humidity.
Note that indication error can be generated based on the above reason.
Safety mark (Set pointer): (Optionally available only for φ60 and φ75)
Green colored safety mark can move to arbitrary position.
Combination of two marks forms arrow to Two left and right safety mark move to upper
indicate set value. and lower limit.
Throttle: (Standard for φ100 and φ150, optionally available for φ60 and φ75)
Throttle that fits inside the orifice of the pressure gauge for reducing pressure impact if gauge is subjected to pulsation.
M4
φ0.5
1.5
*Wetted parts: For SUS316L wetted parts,
7 SUS316L (FS10-014) is the material.
2
GV□□
Glycerin Bath Type Pressure Gauge
Dimensions 1 Unit: mm
φ63.6
φ70.6
φ70.6
φ5
20
13
(6.5) G1/4B
57
(33) 16
12 Two flats
(58) 3
16
.5
+0 0
65
G1/4B φ
3
φ5 R1/4, 1/4NPT
57
16
16
(58)
R1/4, 1/4NPT
Panel cutout
(Panel t8 and below)
GV50-□□3 GV55-1□3
12 Two flats
φ63.6
φ70.6
φ5
20
G1/4B
(6.5) 16
(33)
(58) 3
.5
+0 0
65
R1/4, 1/4NPT φ
16
(58)
For GV51-2□3
3×φ4.5 Mounting hole (36.5) 2
φ75 P.C.D.88 (7.5)
14 Two flats
φ88.6
φ88.6
25
φ5
φ78.6
14
70
14 Two flats
G3/8B
(7.5)
18
(36.5) 18
G3/8B (66.5) 3
φ5
3
.5
+0 0
80
R3/8 φ
70
18
18
R3/8
3
GV□□
Glycerin Bath Type Pressure Gauge
Dimensions 2 Unit: mm
For GV42-2□□
φ100 3×φ5.5 Mounting hole
P.C.D.115 (52.5) 3 Panel t4 and below
13
φ101.6
d
(22)
φ116
φ116
(G□B)
φ5
32.5
(h)
□22
□22
.5
+0 0 (19)
f
3
d 10 (56.5) f
3
φ5 φ
(G□B) (h) 3
d
(R□, 1/2NPT)
(h)
f
d Panel cutout
(R□, 1/2NPT) (Panel t4 and below) f
(h)
GV42-□□□ GV47-1□□
d f h d f h
G3/8B G3/8B
18 86 18 87
R3/8 R3/8
1/2NPT 1/2NPT
G1/2B 20 88 G1/2B 20 89
R1/2 R1/2
φ150 (65.5)
For GV44-2□3 17 Two flats
3×φ5.5 Mounting hole
(60.5) 5
P.C.D.184
φ171
φ171
φ152
d
26 (G□B)
55
φ5
(h)
L Two flats
f 15
.5
+0 0 (22) f 3
4
d 15 (60.5)
3
φ5 φ
(G□B) (h)
d
(R□, 1/2NPT)
(h)
f 15
d Panel cutout
(R□, 1/2NPT) (Panel t8 and below) f
GV44-□□3 GV49-1□3 h
d f h L d f h
G3/8B G3/8B
18 123 14 18 91
R3/8 R3/8
1/2NPT 1/2NPT
G1/2B 20 125 17 G1/2B 20 93
R1/2 R1/2
4
GV□□
Glycerin Bath Type Pressure Gauge
Model number configuration Please specify for ordering the model number and each specs.
Model
G V 5 3 0
Glycerin Bath Type Pressure Gauge ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮
(φ60)
Model number Product specifications Additional specifications (Optional)
0 Stem
Type 5 Panel
① Stem Panel
Type 1 A type D type (Mounting clamp)
2 B type ̶̶̶̶
6 ̶̶̶ D type (Direct mount)
② 2 G1/4B
Connection 5 1/4NPT
7 R1/4
⑤ 0 Standard (±1.5%F.S.)
Accuracy
⑥ 0 Standard
Pointer 6 Safety mark* (Set pointer)
⑦ 0 Standard (Acrylic)
Window 2 Tempered (Inorganic)
⑧ 0 Not required
Treatment 1 Use no oil
2 Use no water
3 Use no oil & water
⑨ 0 Not required
Throttle 1 FS10-013
*Two safety marks always come when specified. (Refer to specification 2)
⑩ 0 Not required
Other additional 1 Required
「Scope of manufacturing」 spec. (Specify required additional spec below.)
・Filling fluid: Glycerin Customized dial「Note」
Aqueous glycerin solution for 0.4MPa and below,
and compound 0.4MPa range. ⑮ 0 Not required
Documents 1 Required
・Weight: φ60 Approx. 0.3kg (Documents available upon request)
Datasheet (Drawing / Specifications)
「Note」Customized dial: Custom letters, customer's logo, Instruction manual
red line and red painted dial. Inspection procedure Mill test report
Calibration test report (One-part one sheet)
Inspection / Traceability certificate
Attending inspection
*Specify code "X" to refer N/A