Professional Documents
Culture Documents
Sony Sa-Wct380 Sa-Wct381 Ver.1.2 SM
Sony Sa-Wct380 Sa-Wct381 Ver.1.2 SM
AEP Model
• SA-WCT380 is the active subwoofer in HT-CT380.
• SA-WCT381 is the active subwoofer in HT-CT381.
UK Model
• All of the units included in the HT-CT380/CT381
SA-WCT380/WCT381
(SA-WCT380/WCT381, SA-CT380/CT381, Remote
control) are required to confirming operation of SA-
Photo: SA-WCT380
WCT380/WCT381. Check in advance that you have
all of the units.
• For the TEST MODE for this unit, refer to the service manual of HT-CT380/CT381.
SPECIFICATIONS
POWER OUTPUT (reference) The N Mark is a trademark or registered Compatible iPod/iPhone models
Copyrights and Trademarks
100 W (per channel at 4 ohms, 100 Hz) trademark of NFC Forum, Inc. in the The compatible iPod/iPhone models
Speaker system This system incorporates Dolby* Digital United States and in other countries. are as follows. Update your iPod/iPhone
Subwoofer system, Bass reflex and the DTS** Digital Surround System. with the latest software before using
Speaker * Manufactured under license from Android™ and Google Play™ are with the system.
trademarks of Google Inc.
13 cm (5 1/4 in) cone type Dolby Laboratories.
BLUETOOTH technology works with:
Power requirements Dolby, and the double-D symbol are
trademarks of Dolby Laboratories. Apple, the Apple logo, iPhone, iPod, and iPhone 6 Plus/iPhone 6/iPhone 5s/
120 V AC, 60 Hz (US and Canadian models) iPod touch are trademarks of Apple Inc., iPhone 5c/iPhone 5/iPhone 4s/
** For DTS patents, see http://
110 V - 240 V AC, 50 Hz/60 Hz patents.dts.com. Manufactured registered in the U.S. and other iPhone 4/iPhone 3GS
(PX and Latin American models) under license from DTS Licensing countries. App Store is a service mark of iPod touch (5th generation)/iPod touch
220 V - 240 V AC, 50 Hz/60 Hz (Other models) Apple Inc. (4th generation)
Limited. DTS, DTS-HD, the Symbol, &
Power consumption DTS and the Symbol together are
On: 20 W registered trademarks of DTS, Inc. “BRAVIA” logo is a trademark of Sony
Standby mode: 0.5 W or less © DTS, Inc. All Rights Reserved. Corporation.
Dimensions (approx.) (w/h/d)
The BLUETOOTH® word mark and logos “DSEE” is a trademark of Sony
170 mm × 342 mm × 381 mm (6 3/4 in × Corporation.
13 1/2 in × 15 in) (vertical installation) are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such “Made for iPod,” and “Made for iPhone”
342 mm × 172 mm × 381 mm (131 /2 in × marks by Sony Corporation is under mean that an electronic accessory has “ClearAudio+” is a trademark of Sony
6 7/8 in × 15 in) (horizontal installation) license. been designed to connect specifically to Corporation.
Mass (approx.) iPod or iPhone, respectively, and has
6.6 kg (14 Ib 8 3/4 oz) This system incorporates High- been certified by the developer to meet “x.v.Color” and “x.v.Color” logo are
Definition Multimedia Interface Apple performance standards. Apple is trademarks of Sony Corporation.
(HDMI™) technology. not responsible for the operation of this
Wireless receiver section The terms HDMI and HDMI High- device or its compliance with safety and “PlayStation®” is a registered trademark
of Sony Computer Entertainment Inc.
Definition Multimedia Interface, and the regulatory standards. Please note that
Speaker system HDMI Logo are trademarks or registered the use of this accessory with iPod or
trademarks of HDMI Licensing LLC in the iPhone may affect wireless Other trademarks and trade names are
Wireless Sound Specification version those of their respective owners.
United States and other countries. performance.
2.0
Frequency band
2.4 GHz (2.4000 GHz - 2.4835 GHz)
Modulation method
Pi / 4 DQPSK
ACTIVE SUBWOOFER
9-896-143-03
2015E33-1 Sony Corporation
© 2015.05 Published by Sony Techno Create Corporation
SA-WCT380/WCT381
AC
0.15 μF 1.5 kΩ voltmeter
(0.75 V)
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
2
SA-WCT380/WCT381
SECTION 1 Ver. 1.1
SERVICING NOTES
The SERVICING NOTES contains important information for servicing. Be sure to read this section before repairing the unit.
C967
800 :/2 W
C970
800 :/2 W
800 :/2 W
3
SA-WCT380/WCT381
Ver. 1.2
Part No.
Destination code
Part No.
Destination code
4
SA-WCT380/WCT381
ADVANCE PREPARATION WHEN CONFIRMING OP- NOTES ON THE WIRELESS CONNECTION (LINK) AFTER
ERATION REPAIRS ARE COMPLETE
All of the units included in the HT-CT380/CT381 (SA-WCT380/ When the parts below is replaced, the wireless connection (LINK)
WCT381, SA-CT380/CT381, Remote control) are required to con- of the Bar speaker and Subwoofer will be disconnected.
firming operation of SA-WCT380/WCT381. Check in advance Before returning repaired products to the customer, follow the pro-
that you have all of the units. cedure below to LINK the Bar speaker and Subwoofer.
Also, if only the Bar speaker or Subwoofer is brought in for repair
NOTE OF REPLACING THE SUB KEY BOARD and the parts below are replaced, be sure to inform the customer
When the SUB KEY board is defective, replace the complete when returning the repaired products that the customer must LINK
mounted board. the Bar speaker and Subwoofer.
(Indicate that the LINK procedure is described in the operating
NOTE OF REPLACING THE IC7400 ON THE SUB MAIN instructions)
BOARD
IC7400 on the SUB MAIN board cannot replace with single. When Parts in which the LINK will be disconnected due to re-
this part is damaged, replace the complete mounted board. placement:
• Complete SUB MAIN board
NOTE OF REPLACING THE IC7203 ON THE SUB MAIN • RF modulator (SWA12-4V RX) (Ref. No. RF1)
BOARD AND THE COMPLETE SUB MAIN BOARD
When IC7203 on the SUB MAIN board and the complete SUB Linking the system (Link to the Subwoofer)
MAIN board are replaced, it is necessary to spread the compound Set up the wireless subwoofer
between the SUB MAIN board and the heat sink. connection again.
Spread the compound referring to the figure below.
1 Press MENU.
– SUB MAIN Board (Component Side) – 2 Select [WS] with j (select), then
press ENTER.
IC7203
5 Press LINK on the subwoofer.
The on/standby indicator on the
subwoofer lights up in green. [OK]
appears on the display of the Bar
Speaker.
If [FAILED] appears, check to ensure
the subwoofer is turned on and
perform the process again from
step 1.
6 Press MENU.
The menu turns off.
5
SA-WCT380/WCT381
Target parts:
< SUB MAIN board >
C7233, C7234, L7202
< SUB POWER board >
C902 or C906, C903 or C908, C904 or C905, C907 or C988, C914 or C915, C935 or C938, C939, C967, C970, C976 to C978, C980, D901,
L966, LF901, R944, TH901, VDR901
L966
C967
C967 C980
C904/905
LF901
R944
C939 C907/988
TH901
D901
C935/938
C902/906
C914/915
C903/908
6
SA-WCT380/WCT381
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
SET
2-2. SUB AMP BLOCK 2-8. SUB LED BOARD, PANEL ASSY
(Page 7) (Page 12)
JIG
2-5. SUB POWER BOARD
When disassembling the unit, use the following
(Page 10)
jig for speaker removal.
+RZWRLQVWDOOWKHIOH[LEOHIODWFDEOH3
2 connector (CN7010)
terminal face
CN7406
4 connector (CN7201)
Note 2: Before connect this connector,
refer to “CAPACITOR
ELECTRICAL DISCHARGE
PROCESSING” on page 3.
6 wiring stopper
5 screw
(BVTP3 u 8)
5 two screws
IC7203
(BVTP3 u 8) 7 two screws
8 heat sink (BVTP3 u 8)
Note 3: When installing the heat sink, spread
the compound referring to “NOTE OF
REPLACING THE IC7203 ON THE
SUB MAIN BOARD AND THE
COMPLETE SUB MAIN BOARD”
on servicing notes (page 5).
+RZWRLQVWDOOWKHIOH[LEOHIODWFDEOH +RZWRLQVWDOOWKHFRQQHFWRU
When installing the flexible flat cable, ensure that Insert the connector straight into the interior.
the colored line is parallel to the connector after insertion. There is a possibility that using this unit without
the connector correctly installed will damage it.
OK NG
Insert straight into the interior. Insert at a slant. OK NG NG
flexible flat flexible flat Insert straight into Insert only part way. Insert at a slant.
cable cable the interior. connector
connector
colored line colored line connector
connector connector
8
SA-WCT380/WCT381
claw
cord bushing
(FBS001)
power cord
4 cord bushing (FBS001) (AC1)
85 +5, -0 mm
3 claw
9
SA-WCT380/WCT381
:LUHVHWWLQJ
OK NG NG
CN7201 CN7201 CN7201
wiring stopper wiring stopper wiring stopper
3 connector (CN7201)
Note: Before connect this connector, refer
to “CAPACITOR ELECTRICAL
DISCHARGE PROCESSING” on page 3.
5 wiring stopper
4 three screws
(BVTP3 u 8) 1 power cord connector
(CN901)
+RZWRLQVWDOOWKHFRQQHFWRU +RZWRLQVWDOOWKHSRZHUFRUGFRQQHFWRU
Insert the connector straight into the interior. Insert the connector straight into the interior.
There is a possibility that using this unit without There is a possibility that using this unit without
the connector correctly installed will damage it. the connector correctly installed will damage it.
OK NG NG OK NG NG
Insert straight into Insert only part way. Insert at a slant. Insert straight into Insert only part way. Insert at a slant.
the interior. connector the interior.
connector
connector connector connector connector
10
SA-WCT380/WCT381
Terminal face is
below side.
2 flexible flat cable (24P)
(FFC1)
+RZWRLQVWDOOWKHFRQQHFWRU
Insert the connector straight into the interior.
There is a possibility that using this unit without
the connector correctly installed will damage it.
OK NG NG
,QVWDOODWLRQSRVLWLRQRI
Insert straight into Insert only part way. Insert at a slant.
WKHQRQZRYHQIDEULF7
the interior. connector
connector button (POWER-CZ2)
connector
11
SA-WCT380/WCT381
2 Insert the jig into a space and raise 1 Insert a flat-head screwdriver in two notches of bottom
front panel block. of the unit, and lift the front panel block a little.
Note 2: When using a jig, please work
so as not to injure front panel
block and cabinet.
– Bottom view –
8 panel assy
Note 3: When installing the front panel block,
remove the used bond and use a new
bond to fix the front panel block.
6 two screws
(BVTP3 u 8)
OK NG NG
Insert straight into Insert only part way. Insert at a slant.
the interior. connector
connector
connector
12
SA-WCT380/WCT381
,QVWDOODWLRQGLUHFWLRQIRUWKHORXGVSHDNHU
FP63
Note: When installing the loudspeaker (13 cm) (SP1),
make sure that there is a position of the speaker 1 four tapping crews
terminal to the position shown in the figure below. (BV4 u 20)
:LUHVHWWLQJ
gray
(wide side)
black
(narrow side)
– Bottom view –
13
SA-WCT380/WCT381
SECTION 3
TROUBLESHOOTING
1. ON/STANDBY indicator flashes in red (PROTECT)
Note: When the volume level is “0”, power of amplifier block is turned off, and amplifier protect diagnosis is not performed.
Set the volume level than “1”.
No
Yes
Yes
SUB POWER board is damaged.
The voltage of the following is 3.3 V. No Check and replace the diode
SUB MAIN board: IC7400 pin 1 (D7102) on the SUB MAIN board.
Yes
The reset signal is inputted to pin 40 No Check and repair the area
of IC7400 on the SUB MAIN board surrounding IC7402 on the SUB
after AC input. MAIN board.
Yes
14
SA-WCT380/WCT381
Yes
Yes
Yes
15
SA-WCT380/WCT381
SECTION 4
DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards. For Schematic Diagrams.
Note: Note:
• X : Parts extracted from the component side. • All capacitors are in μF unless otherwise noted. (p: pF) 50
• Y : Parts extracted from the conductor side. WV or less are not indicated except for electrolytics and
• f : Internal component. tantalums.
• : Pattern from the side which enables seeing. • All resistors are in Ω and 1/4 W or less unless otherwise
(The other layers’ patterns are not indicated.) specified.
• f : Internal component.
Caution: • 2 : Nonflammable resistor.
Pattern face side: Parts on the pattern face side seen • 5 : Fusible resistor.
(Conductor Side) from the pattern face are indicated. • C : Panel designation.
Parts face side: Parts on the parts face side seen from
(Component Side) the parts face are indicated. Note: Note:
The components identi- Les composants identifiés
Caution: fied by mark 0 or dotted par une marque 0 sont
Pattern face side: Parts on the pattern face side seen line with mark 0 are criti- critiques pour la sécurité.
(SIDE B) from the pattern face are indicated. cal for safety. Ne les remplacer que par
Parts face side: Parts on the parts face side seen from Replace only with part une pièce portant le nu-
(SIDE A) the parts face are indicated. number specified. méro spécifié.
16
SA-WCT380/WCT381
– SUB MAIN Board – SUB MAIN BOARD IC7400 MB9AF142LBPMC1-G-JNE2 (SYSTEM CONTROLLER)
SA-WCT380/WCT381
17 17
SA-WCT380/WCT381
Ver. 1.1
1 2 3 4 5 6 7 8 9 10 11 12 13
SP1
(SUBWOOFER)
SUB LED
>01P BOARD (Page 20)
SUB MAIN BOARD (COMPONENT SIDE) CN7000 SUB MAIN BOARD (CONDUCTOR SIDE)
A CL7223 CL7224
ET7201 CL7225
CL7213
C7243 C7242 CL7218
(CHASSIS) (CHASSIS) R7514
6 4 CL7500 CL7498
CL7217
Q7401 2 1
3 1 CL7481 CL7480
CL7219 1 3
R7513 CN7202
CL7212
1
SUB KEY
C7231 C7232 Q7203 JL7215 BOARD
CL7204
CL7221 CL7226 CL7478
4
R7236
E
F72001 R7238 JL7214
CN7201 C7245 CL7479
R7237
CL7203 CL7220 >02P CL7227
SUB POWER
BOARD
CN902 R7239
R7241
(Page 20) C7233 L7202 C7234 R7240
JL7204
CL7202 6 4 C7240
9
C Q7202
1 3
JL7203
C7237
R7234
E
C7226 C7246
Q7200
SL7200
R7231
L7103
JL7100 C7228
R7232
44 23
C7229 C7225
(CHASSIS)
C7126
R7147 C7224
D
JC7209
JC7207
JC7208
C7221
C7220
C7223
(CHASSIS) IC7203 4 1
C7218
IC7105 CL7208
R7230
C7222
1 22
C7219
C7132 C7128 CL7209 CL7210
R7148 C7127
5 8 JC7215 JC7205 JC7214 JC7206
C7131 R7150 R7151 C7201 C7202
L7102
JL7101 C7129
R7149
R7242
R7229
JL7107
C7215 R7243 C7217 C7115 IC7108 JL7106
E 56
C7216 R7228 29
L7201
JL7103
A C7138
4 3 C7137 C7109
C7124 C7122
1 2 JL7109
D7102 R7143
C7206
R7218
R7153 5 1
IC7202 K
R7144
R7145
JL7108 R7115 Q7100 JL7426 C7210
R7114 E
R7425
R7489
R7495
R7221
C7212 JL7419 JL7427
Q7101 JL7424 JL7420 C7211
1 JL7205 JL7211 28 R7496
IC7104
C7208
JL7428
CL7238
C7205
C7207
R7207
JL7434
16 1
R7209
R7227 JL7206
R7525 JL7210 C7404 R7118
R7226
R7244
JL7208
JL7209
C7413 JL7490
FB7200
JL7491
F 8
CL7240 R7509
JL7408 K A JL7437 C7402
Q7403
C7250
R7246R7247
CL7239 JL7441
R7468
C7430 5 R7467
C7248 R7461 R7508 JL7442
IC7400 JL7484 R7521
R7504
R7507
4 R7462 E
JL7443
1 C7419 C7429 JL7483
2 X7201 JL7481 R7519
C7420
1 C7249
R7245
R7466
FB7402
R7503 R7520
IC7205 R7460
R7452
JL7444 R7517
C7416
R7459
C7415
CN7406
C7412
IC7402
R7432 33 48 R7408 R7522
RF MODULATOR JL7496 JL7497 R7402
C7410
(SWA12-4V RX) X7400 JL7454 C7405
R7401
R7403
JL7456
JL7489 JL7494 JL7482 JL7500
JL7461
JL7501
R7510
R7458 R7511 C7408
R7426
C7409
R7423
R7424
23 CL7472
FB7401 24 R7450 R7447
R7524 JL7498 JL7502
R7405 JL7460 JL7488
R7523 JL7438 JL7487 CL7477
C7110
G C7111
R7407
R7410
R7406
R7409
R7400
CL7200 CL7214
C7401
SL001
(CHASSIS) (CHASSIS)
SL002 11
CL7501 CL7499 11 (11)
1-894-325-
1-894-325- (11)
Note 1: When the SUB KEY board is defective, Note 2: When the RF modulator (Ref. No. RF1) is replaced, refer to “NOTES ON THE WIRELESS Note 3: When C7233, C7234 and L7202 on the SUB MAIN board are replaced,
replace the complete mounted board. CONNECTION (LINK) AFTER REPAIRS ARE COMPLETE” on page 5. refer to “BOND FIXATION OF ELECTRIC PARTS” on page 6.
Note 4: When the IC7203 on the SUB MAIN board is replaced, refer to “NOTE OF REPLACING THE Note 5: IC7400 on the SUB MAIN board cannot replace with single.
IC7203 ON THE SUB MAIN BOARD AND THE COMPLETE SUB MAIN BOARD” on page 5. When this part is damaged, replace the complete mounted board.
SA-WCT380/WCT381
18 18
SA-WCT380/WCT381
Ver. 1.1
4-2. SCHEMATIC DIAGRAM - MAIN Section - • See page 17 for Waveforms. • See page 22 for IC Block Diagrams. • See page 17 for IC Pin Function Description.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
NC 21
JL7502
JL7501
FB7401
R7523
330 IC7205 R7218
470
C7210
0.047 1
PWM_HPM_L NC_56
56
13.9
4 1
13.9
JC7206 E E
1
NC 20 CLOCK BUFFER 2 55
0 13.9 5 B B 2
JL7500 CL7501 PWM_HPP_L NC_55
IC7205
GPIO 19 TC7WHU04FK C7206 3 54 C C 13.9
JL7499 CL7200 CL7214 PWM_HPM_R NC_54 Q7202
0.0047 HN1A01FU 3 6
GPIO 18 4 53 C7215
JL7498 SL001 SL002 JC7215
R7525 R7244 R7227 1.6 1 8 3.2 PWM_HPP_R NC_53 1 0
DC DETECT 0 0
DIN_TX 17 0 0 100 VCC 5 52 1.8 3.2
JL7497 JL113 1.6 2 7 AVSS VR_PWM
MCK_OUT_RX 16 C7208 0.0047 0.6 6 51 0
JL7496 CL7238 R7245 1.6 3 6 1.6 PLL_FLTM AVSS_PWM
FB7200 C7211 0.047
GPIO2 15 0 1 7 50 3.2 R7242 Q7200
JL7495 CL7499
C
FFC1 4 5 1.6 PLL_FLTP AVDD_PWM
R7219 470 47 2PC4081R-115 R7234 C7237
LRCK1_TX 14 GND 1.8 8 49 1.5
JL7482 C7111 C7110 VR_ANA PWM_P_4 BUFFER
100k 0.01
RF1 BCK1_TX/POWER 13 0.01 0.01 C7207 10 3.2 9 48 1.5
RF MODULATOR AVDD PWM_M_4
(SWA12-4V RX) GND 12 R7220 15k 0.2 10 47 R7243
JL7494 ASEL_EMO2 NC_47 47
GPIO3 11 C7430 C7431 R7205 0 JL7205
0.1 100 1.6 11 46
JL7493 MCLK NC_46
SDA_MRX 10 10V R7221 18k CL7213
1 12 45
JL7492 OSC_RES NC_45
R7519 C7248 C7216 CL7223 C7243 CN7202
SCL_MRX 9 100 0.1 13 44 1 R7239 0.001 2P
JL7483 WS_SDA DVSS2_CORE NC_44 100k CL7215 CL7498
SDA_STX 8 3.2 14 43
JL7484 R7520 100 WS_SCL DVDD2_CORE PWM_P_3 1 SW(+) SP1
SCL_STX 7 15 42 CL7216 CL7500 (SUBWOOFER)
JL7485 R7521 100 R7246 C7209 C7217
D
WS_RST 1M 10
EMO1 PWM_M_3 10 2 SW(–)
RESETN 6 TAS5534_XRST JL7206 3.4 16 41 R7241
JL7481 C7242
WS_INT RESET PWM_P_2 100k 0.001
INT 5 R7222 10k 3.2 17 40 CL7224
JL7491 R7517 X7201 R7247 R7118 HP_SEL PWM_M_2
Link State 4 100 12.288MHz 1.8k 0 JL7207 CL7225
TAS5534_XPDN 3.4 18 39
JL7486 PDN PWM_P_1
DOUT_RX 3 TAS5534_MUTE JL7208 3.4 19 38
R7522 MUTE PWM_M_1 R7228 (CHASSIS)
IC7104
C7214 C7249 C7250 JL7209 47
+4V 2 100 22p TAS5534_SDA 2.2 20 37 3.1
JL7490 12p 12p
SDA VALID
+4V 1 TAS5534_SCL JL7210 2.2 21 36
SCL DVSS1_CORE +12V REGULATOR
VCONT
FB7402
SENSE
CL7239 R7206 47 JL7211 1.6 22 35 3.2
VOUT
IC7104
GND
LRCLK DVDD1_CORE
VIN
CL7240 R7207 47 JL7212 SI-3010KM-TLA
1.6 23 34
E
SCLK BKND_ERR C7205
24 33 470 5 4 3 2 1
SDIN1 PSVC 6.3V
25 32
1
11.8
28
3.4
SDIN2 TEST
26 31
CL7472 SDIN3 LRCLKO
CL7241 R7209 100 JL7213 0 27 30
SDIN4 SCLKO
1.8 28 29
VR_DIG SDOUT
C7212 R7229
10
L7201 3 2 10k
10uH
R7461 3.3k
R7460 10k
10k
G R7510 CL7473
JL7214
>02S
R7450
IC7203
R7447 R7458
10k 10k 1k 47k R7463 4 PVDD_28V
JL7215
1k
R7459 R7145 C7125 C7124 CL7220
5 PVDD_GND SUB POWER
10k DIGITAL POWER AMP C7225 10k 100 0.1 BOARD
0.047 6 PVDD_GND
R7424 R7423 R7401 IC7203 16V CL7227 CN902
10k 10k 100 TAS5614LA
C7218 7 PVDD_GND
(Page 21)
JL7461
JL7460
JL7456
OC_ADJ R7231
0.1 0.001 GND
X7400 R7230 10
4MHz 3.1 4 41
CL7471
H
30k RESET GND ET7201
1.5 5 40 14 CL7210 L7202
3.4
3.4
3.4
3.4
3.4
3.4
3.3
3.4
3.4
3.4
0
0
0
E
R7408 C7405
10k 0.1 C7219 1.5 6 39 14
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
DEST
(PROG VURX)
(PROG VUTX)
ON CHIP DEBUG/CLK1
P_CONT2
P_CONT1
AVSS
AVRH
AVCC
NC
KEY_POWER
KEY_PAIRING
VCC
Pull Up Power
C-START PVDD_AB
C7401 C7412 3.2 8 37 28
0.1 0.001 DVDD PVDD_AB
9 36 28 R7232
4
GND PVDD_AB
10 10
35 14
GND OUT_B
49 32 11 34
R7409 NC VSS GND GND
100 31 1.5 12 C7226 C7234 C7229 C7247 C7232
1 50 33 1 1000 470p 1 1000p
I
TCK X1 GND GND 35V
R7406 100 3.4 51 30 1.4 7.6 13 32
TDI X0 AVDD OUT_C
R7410 100 3.4 52 29 0 14 31 28
R7452 C7246 C7233
TMS MD0
2.2k
INPUT_C PVDD_CD 1 1000 F72001
3.4 53 28 0 15 30 28 35V 5A CL7204 (CHASSIS)
TDO MD1 INPUT_D PVDD_CD 32V
R7407 54 27 3.3 JL7444 WS_INT JC7208 0 3.2 16 29 28
100 NC WS_INT FAULT PVDD_CD
55 26 3.3 JL7443 R7507 0 WS_SDA CL7208 3.2 17 28 CL7203
C7220
56
NC
IC7400 WS_SDA
25 3.3 JL7442 R7508 0 WS_SCL
1 JC7207 0 3.2 18
OTW OUT_D
27 R7236
NC WS_SCL CLIP OUT_D 56k
57 SYSTEM CONTROLLER 24 3.4 JL7441 WS_RST 19 26
NC IC7400 WS_RST M1 GND
58 23 JC7209 0 20 25
MB9AF142LBPMC1-G-JNE2
J
NC NC M2 GND R7237
59 22 21 24 3.2
R7509 NC NC CL7476 M3 BST_C
47k
0 3.4 60 21 3.4 JL7438 11.8 22 23 2.9
PVDD_STBY INITX(RESET) GVDD_CD BST_D SL7201 CL7212
3.4 61 20 R7405
JL7437 100 C7223 Q7203
VCC NC 1 2PA1576R-115
62 19
JL7407 PVDD_SD_EN NC JL7436 POWER DETECT
63 18 3.4 C7411 C7429
NC VCC R7400 C7221 C7245 R7238
4.7 0.1 100 1 0.01 12k
64 17 1.1
VSS C CL7209
JL7434
TAS5534_MUTE
TAS5534_XPDN
TAS5534_XRST
P_DAMP_CLIP
C7402
TAS5534_SDA
TAS5534_SCL
LED_GREEN
0.1
DRIVER_SD
K (CHASSIS)
LED_RED
DC_DET
R7470
VCC
VSS
C7403 10k
NC
NC
NC
NC
JL7100
0.1
JL7101
1
2
3
4
5
6
7
8
R7466 3.4
10
12
13
14
15
16
11
10k
C7413 0
3.4
3.2
3.2
3.2
2.2
2.2
3.4
3.4
3.4
0
3.4
L
D7401
DA2J10100L
JL7419
JL7420
JL7423
JL7424
JL7426
JL7427
JL7428
R7495 2.2k
1k
3.4 1
CE VDD
4 4.1 C7128
22
IC7105
2 3 3.2
R7489 10k
IC7402 R7504
22k
GND VOUT
JL7109
DC/DC CONVERTER
IC7105
VOLTAGE DETECT JL7102 C7127 BD9E102FJ-GE2
R7488 10k 22 R7149
IC7402 150k 5 4
0.7
PST8429UL R7503 Q7101 R7147
M C7421
0.022
R7425
10k
2.4 3 2 5.1
47k 6
5
2
QM2401C1
0.7 6
FB
COMP
AGND
EN
3 15.9
1k
JL7103 JL7107
TAS5534_SDA
TAS5534_SCL
3.4 0
Q7100
R7115 R7114
DRIVER_SD
2 B B 5 33k 33k
LTC014EUBFS8TL
DC_DET
Q7401 C C
RN1902 6 3
CLIP
N CN7405
3P R7513
LED DRIVE
0 3 Q7100, 7101
B+ SWITCH
0
>01S LED(R) 1
CL7219 CL7481
CL7218 CL7480 R7514 0
SUB LED LED(G) 2
CL7217
BOARD
VCC 3
CN7000
(Page 20)
Note 1: When the SUB KEY board is defective, Note 2: When the RF modulator (Ref. No. RF1) is replaced, refer to “NOTES ON THE WIRELESS Note 3: When C7233, C7234 and L7202 on the SUB MAIN board are replaced,
replace the complete mounted board. CONNECTION (LINK) AFTER REPAIRS ARE COMPLETE” on page 5. refer to “BOND FIXATION OF ELECTRIC PARTS” on page 6.
Note 4: When the IC7203 on the SUB MAIN board is replaced, refer to “NOTE OF REPLACING THE Note 5: IC7400 on the SUB MAIN board cannot replace with single.
IC7203 ON THE SUB MAIN BOARD AND THE COMPLETE SUB MAIN BOARD” on page 5. When this part is damaged, replace the complete mounted board.
SA-WCT380/WCT381
19 19
SA-WCT380/WCT381
Ver. 1.1
4-3. PRINTED WIRING BOARD - SUB LED Board - • : Uses unleaded solder. 4-5. PRINTED WIRING BOARD - SUB POWER Board - • : Uses unleaded solder.
1 2 3 1 2 3 4 5
SUB MAIN
SUB LED BOARD (SIDE A) >02P BOARD (Page 18)
SUB POWER BOARD CN7201
LND001
A K
D7002
(ON INDICATOR) 3 JL977
C904 (US, CND) F901 C976
11 C905 (Except US, CND)
A931 D965 C980
L967 C967
1-894-327- (11) R951 Q952
L966
Q950 R952 E
D973
K A E C978
SUB LED BOARD (SIDE B) VDR901 C965 TH902
R978
C970 R976 3
B IC931 1 2
8 10 T901 12 14 R977
B (Page 18) POWER
TRANSFORMER
R987 C971
R971
SUB MAIN
R7002 CN7000 JL902 D967
CL7001 BOARD JL903
CN7405
R965
CL7002 R7000
3
JS902
CL7000 >01P LF901 F931 K A
1
LINE FILTER
11
1-894-327- (11) PH930
JL936
R945
C K A K A
K
A
D942
TH901 D937 D936 E C
R947 D941
A A
R914 C940
7 5 3 2 D934
(US, CND) K K
C937 K
JL978 JL979
K R937 Q930 A R938
D930
JW904 C939 D939 A
R901 R934 E
C907 (Except US, CND)
4-4. SCHEMATIC DIAGRAM - SUB LED Board - C988 (US, CND) R932 C931
C941
JW901
D931
1 2 3 4 4 2 1 3
A K K R935 C932
D935
R944
D901
A A K
D - + JW907
JL937
JW906 D972
C902 C903 (US, CND) C936
D932 E
JW903
SUB LED BOARD
C906 C908 (Except US, CND) K A Q931
C930
JW905
R955
A 2 6 C933
R953
D7001 C935 (US, CND)
CN7000 SML-D14VWT86A C938 (Except US, CND)
3P R7000 C934
(STANDBY INDICATOR) R936
470
>01S LED(R) 1
CL7000
D938 1 7 R954
CL7001 JL904
SUB MAIN LED(G) 2
CL7002
C914 (US, CND)
C915 (Except US, CND)
IC930
BOARD R7002
VCC 3 150 R997
CN7405
(Page 19) E ET931 A932
D7002
B SMLE13EC8T
(ON INDICATOR)
11
1-894-328- (11)
(CHASSIS)
Note: When C902 to C908, C914, C915, C935, C938, C939, C967, C970, C976 to C978, C980, C988, D901, L966, LF901, R944,
TH901 and VDR901 on the SUB POWER board are replaced, refer to “BOND FIXATION OF ELECTRIC PARTS” on page 6.
SA-WCT380/WCT381
20 20
SA-WCT380/WCT381
Ver. 1.1
4-6. SCHEMATIC DIAGRAM - SUB POWER Board - • See page 22 for IC Block Diagrams.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
E
(US, CND) (Except US, CND)
(CHASSIS) C902 C903 C906 C908
0.001 0.001 0.0022 0.0022
250V 250V 250V 250V
CN901 F901
3P 5A LF901
JL901 250V JL902 LINE FILTER TH901
AC1 LIVE 1 D901
(AC IN) NC 2 C988 C907 1 D3SB60F3 ET932
JL903 0.1 0.33 F931
B NEUTRAL 3
310V 310V ~
3 2.5A L967
E
LND001 – + 250V 4.7uH
C905 C904 4
VDR901
PATTERN ~
SPARK-GAP 0.33 0.22 R901 (CHASSIS)
310V 310V 1.5M 2 C915 C914
0.5W 100 330 R914
450V 200V 0.33 D967 C970 D973 C977 C968 CN902
(Except US, CND) (US, CND) 1W RB068L100TE25 1000 UDZSUSTE-1730B 47 0.1 10P
(US, CND) 25V 35V JL974
JL978 (Except US, CND) 10 A_GND
JL973
C967 C976
9
R944 UN12V
IC930 47k 3W (US, CND)
100k 3W (Except US, CND)
R944
C939
0.0033
400V
T901
2200
35V
47
35V
JL975
8 PVDD_GND
POWER
FB/OLP
C >02S
S/OCP
POWER CONTROL TRANSFORMER D965 7 PVDD_GND
D/ST
GND
VCC
FMX-22SL
IC930
BD
NF
STR-Y6735 (US, CND) D937 7 8 6 PVDD_GND
JL976 SUB MAIN
STR-Y6766B (Except US, CND) RR264M-400 L966
7
6
5
4
3
2
1
C965 2.2uH 5 PVDD_28V BOARD
0.2 D938 0.0047
4 PVDD_28V CN7201
0.8
21.4
0
161
6 9 250V
SARS10
3 PVDD_28V
(Page 19)
D936 2 NC
R997 RR264M-400 5 10 C971 R971 R977 R976
0.01 JL977
0 220k 47k 1.5k
1 /TH_DET
(Except US, CND)
C930 C935 C938 4 11
R932 0.1 2200p 680p JL979
(HEATSINK)
R932
D 0.47 1W (US, CND)
2.2 1W (Except US, CND)
1.5kV 1.5kV
3 12
R955 R954 R953 (US, CND)
R934 D930
0.15 2W (US, CND) R934 0 4.7 4.7
DZ2J180M0L
0.22 2W (Except US, CND)
2 13
25.5
2.1
Q930
2SC5053T100Q
D931 1 14
UDZSUSTE-1730B REGULATOR
2
21.4 22
VREF
IC931
R937 D942
D935 4.7k CRH02(T5R,SONY,XM) TH902
E UDZSUSTE-1730B
22 (US, CND)
SHUNT REGULATOR
C941 D939 C937 C940 (US, CND)
IC931
R935 330 DZ2J24000L 10 470p MM1431FNRE
250V 28
2.2k 25V JS902
27.8
C931
150p (US, CND) D934
R938 DZ2J180M0L R947 Q950
180p (Except US, CND) 27k 4.7 2PA1576R-115 0
A
PH930
3
EL816S1(B)(TA)(DTE-S) R987
D972 R945 1k
KDZTR18B 100
ISOLATOR
JL936
F 0.8 26.5
R965
Q950, 952
THERMAL DETECT
R936 JL937 1k
C933 47k 25.5
D932 10 R952
DZ2J15000L 1k
3.2
0
UDZSUSTE-1730B
6.6 Q952
D941
LTC044EUBFS8TL
Q931
G C936
0.1
LTC044EUBFS8TL
PROTECT DETECT
C934
2.2
C932
4700p
R978
4.7k
C980
47
35V
R951
68k
C978
10
50V
Note: When C902 to C908, C914, C915, C935, C938, C939, C967, C970, C976 to C978, C980, C988, D901, L966, LF901, R944,
TH901 and VDR901 on the SUB POWER board are replaced, refer to “BOND FIXATION OF ELECTRIC PARTS” on page 6.
SA-WCT380/WCT381
21 21
SA-WCT380/WCT381
Ver. 1.1
TEMP
4 VDD SENSE
FAULT 16
CE 1 BIAS OTW 17 PROTECTION
POWER-UP
&
CLIP 18 RESET
I/O LOGIC
M1 19
VOLTAGE
– M2 20 BST_X
REFERENCE
+ M3 21 GVDD_X
UVP
GVDD_CD 22 AVDD
DVDD
CURRENT
LIMIT 3 VOUT
GND 2
56 N.C.
55 N.C. FEEDBACK/
EMO1 15 STANDBY
RESET 16 54 N.C.
OVERLOAD
53 N.C. FB/OLP 5
HP_SEL 17 DEVICE PROTECTION
PDN 18 CONTROL 52 VR_RWM
MUTE 19 51 AVSS_PWM
BOTTOM
50 AVDD_PWM BD 6
DETECTION
49 PWM_P_4
I2C SERIAL 48 PWM_M_4 NF 7 OSCILLAOTR
SDA 20
CONTROL DIGITAL 47 N.C.
SCL 21 INTERFACE PWM
AUDIO 46 N.C.
SECTION
PROCESSOR 45 N.C.
44 N.C.
43 PWM_P_3
42 PWM_M_3
41 PWM_P_2
40 PWM_M_2
LRCLK 22 CLOCK, PLL, 39 PWM_P_1
SCLK 23 AND 38 PWM_M_1
SDIN1 24 SERIAL DATA 37 VALID
SDIN2 25 INTERFACE 36 DVSS1_CORE
SDIN3 26 35 DVDD1_CORE
SDIN4 27 34 BKND_ERR
VR_DIG 28 33 PSVC
32 TEST
31 LRCLKO
30 SCLKO
29 SDOUT
SA-WCT380/WCT381
22 22
SA-WCT380/WCT381
SECTION 5
EXPLODED VIEWS
Note:
• -XX and -X mean standardized parts, so • The mechanical parts with no reference
The components identified by mark 0
they may have some difference from the number in the exploded views are not sup-
or dotted line with mark 0 are critical for
original one. plied.
safety.
• Items marked “*” are not stocked since • Color Indication of Appearance Parts Ex-
Replace only with part number specified.
they are seldom required for routine ser- ample:
vice. Some delay should be anticipated KNOB, BALANCE (WHITE) . . . (RED) Les composants identifiés par une marque
when ordering these items. 0 sont critiques pour la sécurité.
Parts Color Cabinet’s Color Ne les remplacer que par une pièce por-
tant le numéro spécifié.
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
1 4-874-614-62 SCREW (1) (3.5X16), TAPPING 2 2-682-469-11 FOOT (SW) (4 pieces, 1 set)
23
SA-WCT380/WCT381
Ver. 1.2
56
not supplied
#3
#1 #1 not supplied
#1 #3 ACP2
(SP for Hong Kong)
not supplied A
(See Note 2)
not supplied not supplied
#1 #1
not supplied
#1 52
#1
#1 #1
not supplied
A
51
#1
Note 1: When the complete SUB MAIN board is replaced, refer to Note 2: Ref. No. ACP2 is a service part used only for the Singapore
“NOTE OF REPLACING THE IC7203 ON THE SUB MAIN model sold in Hong Kong.
BOARD AND THE COMPLETE SUB MAIN BOARD” and
“NOTES ON THE WIRELESS CONNECTION (LINK) AF- Note 3: When the RF modulator (Ref. No. RF1) is replaced, refer to
TER REPAIRS ARE COMPLETE” on page 5. “NOTES ON THE WIRELESS CONNECTION (LINK) AF-
TER REPAIRS ARE COMPLETE” on page 5.
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
51 A-2063-689-A SUB POWER BOARD, COMPLETE (US, CND) 0 AC1 1-837-312-11 CORD, POWER-SUPPLY (AR)
51 A-2063-690-A SUB POWER BOARD, COMPLETE 0 AC1 1-839-940-21 POWER-SUPPLY CORD (TH)
(Except US, CND) 0 AC1 1-839-999-21 POWER-SUPPLY CORD (UK, EA3)
52 A-2076-762-A SUB MAIN BOARD, COMPLETE (SV) (See Note 1) 0 ACP1 1-569-008-33 ADAPTOR, CONVERSION (PX)
53 3-087-053-01 +BVTP 2.6 (3CR) (L=8 mm)
54 A-2063-687-A SUB KEY BOARD, COMPLETE 0 ACP1 1-785-504-21 ADAPTOR, CONVERSION (LA)
0 ACP2 1-770-019-72 ADAPTOR, CONVERSION PLUG 3P (SV)
55 4-549-776-01 BUTTON (POWER-CZ2) (SP for Hong Kong only) (See Note 2)
56 4-559-905-01 COVER BACK (CZ2) FFC1 1-970-613-11 WIRE KIT (SW FFC) (24 pin)
0 57 4-966-267-12 BUSHING (FBS001), CORD RF1 1-492-348-11 RF MODULATOR (SWA12-4V RX) (See Note 3)
0 AC1 1-834-966-42 POWER-SUPPLY CORD #1 7-685-646-71 SCREW +BVTP 3X8 TYPE2 IT-3
(AEP, RU, E3, LA, SP, PX)
0 AC1 1-835-068-21 CORD, POWER (AUS) #2 7-685-146-11 SCREW +P 3X8 TYPE2 NON-SLIT
#3 7-685-646-79 SCREW +BVTP 3X8 TYPE2 IT-3
0 AC1 1-837-308-12 CORD, POWER-SUPPLY (US, CND)
24
SA-WCT380/WCT381
not supplied
102
102
102 SP1
not supplied
(SUB LED board)
102
#1 102
#1
B
102
B
not supplied
102
not supplied
101
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
101 A-2064-857-A PANEL (FRONT-CZ2) ASSY (WST380) SP1 1-858-315-21 LOUDSPEAKER (13 cm)
101 A-2068-986-A PANEL (FRONT-CZ2WH) ASSY (WST381) #1 7-685-646-71 SCREW +BVTP 3X8 TYPE2 IT-3
102 4-238-407-12 SCREW (1) (4X20), +BV TAPPING
25
SA-WCT380/WCT381
SECTION 6
SUB KEY SUB LED
ELECTRICAL PARTS LIST
SUB MAIN
Note:
• Due to standardization, replacements in • CAPACITORS When indicating parts by reference num-
the parts list may be different from the uF: μF ber, please include the board name.
parts specified in the diagrams or the com- • COILS
ponents used on the set. uH: μH The components identified by mark 0
• -XX and -X mean standardized parts, so • SEMICONDUCTORS or dotted line with mark 0 are critical for
they may have some difference from the In each case, u: μ, for example: safety.
original one. uA. . : μA. . , uPA. . , μPA. . , Replace only with part number specified.
• Items marked “*” are not stocked since uPB. . : μPB. . , uPC. . , μPC. . ,
they are seldom required for routine ser- uPD. . : μPD. . Les composants identifiés par une marque
vice. Some delay should be anticipated 0 sont critiques pour la sécurité.
when ordering these items. Ne les remplacer que par une pièce por-
• RESISTORS tant le numéro spécifié.
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
A-2063-687-A SUB KEY BOARD, COMPLETE C7206 1-118-395-11 CERAMIC CHIP 0.0047uF 10% 50V
*********************** * C7207 1-116-720-11 CERAMIC CHIP 10uF 20% 6.3V
C7208 1-118-395-11 CERAMIC CHIP 0.0047uF 10% 50V
When the SUB KEY board is defective, replace the complete mounted board. * C7209 1-116-720-11 CERAMIC CHIP 10uF 20% 6.3V
************************************************************* C7210 1-118-388-11 CERAMIC CHIP 0.047uF 10% 25V
SUB LED BOARD C7211 1-118-388-11 CERAMIC CHIP 0.047uF 10% 25V
************* * C7212 1-116-720-11 CERAMIC CHIP 10uF 20% 6.3V
C7214 1-164-858-11 CERAMIC CHIP 22PF 5% 50V
< CONNECTOR > * C7215 1-116-735-11 CERAMIC CHIP 1uF 10% 16V
* C7216 1-116-735-11 CERAMIC CHIP 1uF 10% 16V
CN7000 1-580-056-21 PIN, CONNECTOR (SMD) 3P
* C7217 1-116-720-11 CERAMIC CHIP 10uF 20% 6.3V
< LED > * C7218 1-116-735-11 CERAMIC CHIP 1uF 10% 16V
C7219 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V
D7001 6-504-089-01 LED SML-D14VWT86A (STANDBY INDICATOR) * C7220 1-116-735-11 CERAMIC CHIP 1uF 10% 16V
D7002 6-504-074-01 LED SMLE13EC8T (ON INDICATOR) * C7221 1-116-735-11 CERAMIC CHIP 1uF 10% 16V
< RESISTOR > C7222 1-118-391-11 CERAMIC CHIP 0.01uF 10% 50V
* C7223 1-116-735-11 CERAMIC CHIP 1uF 10% 16V
R7000 1-216-817-11 METAL CHIP 470 5% 1/10W C7224 1-118-365-11 CERAMIC CHIP 0.047uF 10% 50V
R7002 1-216-811-11 METAL CHIP 150 5% 1/10W C7225 1-118-365-11 CERAMIC CHIP 0.047uF 10% 50V
************************************************************* C7226 1-118-044-11 CERAMIC CHIP 1uF 10% 50V
A-2076-762-A SUB MAIN BOARD, COMPLETE (SV) (See Note 1) C7228 1-114-214-81 CERAMIC CHIP 470PF 5% 50V
************************ C7229 1-114-214-81 CERAMIC CHIP 470PF 5% 50V
C7230 1-120-003-11 FILM CHIP 1uF 20% 35V
< CAPACITOR > C7231 1-112-692-11 CERAMIC CHIP 1000PF 5% 50V
C7232 1-112-692-11 CERAMIC CHIP 1000PF 5% 50V
C7108 1-116-736-11 CERAMIC CHIP 1uF 10% 10V
C7109 1-116-736-11 CERAMIC CHIP 1uF 10% 10V C7233 1-112-254-11 ELECT 1000uF 20% 35V
C7110 1-118-391-11 CERAMIC CHIP 0.01uF 10% 50V (See Note 2)
C7111 1-118-391-11 CERAMIC CHIP 0.01uF 10% 50V C7234 1-112-254-11 ELECT 1000uF 20% 35V
C7115 1-117-681-11 ELECT CHIP 100uF 20% 16V (See Note 2)
C7237 1-118-459-11 CERAMIC CHIP 0.01uF 10% 25V
C7122 1-118-361-11 CERAMIC CHIP 0.1uF 10% 50V C7240 1-116-731-11 CERAMIC CHIP 2.2uF 20% 6.3V
C7123 1-112-806-11 ELECT CHIP 47uF 20% 50V C7242 1-118-403-11 CERAMIC CHIP 0.001uF 10% 50V
C7124 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V
C7125 1-117-681-11 ELECT CHIP 100uF 20% 16V C7243 1-118-403-11 CERAMIC CHIP 0.001uF 10% 50V
C7126 1-116-865-11 CERAMIC CHIP 10uF 10% 25V C7245 1-118-459-11 CERAMIC CHIP 0.01uF 10% 25V
C7246 1-118-044-11 CERAMIC CHIP 1uF 10% 50V
C7127 1-116-713-11 CERAMIC CHIP 22uF 20% 10V C7247 1-120-003-11 FILM CHIP 1uF 20% 35V
C7128 1-116-713-11 CERAMIC CHIP 22uF 20% 10V * C7248 1-118-035-11 CERAMIC CHIP 0.1uF 10% 25V
C7129 1-162-916-11 CERAMIC CHIP 12PF 5% 50V
C7131 1-112-527-91 CERAMIC CHIP 680PF 2% 50V C7249 1-164-852-11 CERAMIC CHIP 12PF 5% 50V
C7132 1-118-361-11 CERAMIC CHIP 0.1uF 10% 50V C7250 1-164-852-11 CERAMIC CHIP 12PF 5% 50V
* C7400 1-116-720-11 CERAMIC CHIP 10uF 20% 6.3V
* C7137 1-116-719-11 CERAMIC CHIP 10uF 10% 6.3V C7401 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V
* C7138 1-116-719-11 CERAMIC CHIP 10uF 10% 6.3V C7402 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V
C7201 1-118-391-11 CERAMIC CHIP 0.01uF 10% 50V
C7202 1-118-395-11 CERAMIC CHIP 0.0047uF 10% 50V C7403 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V
C7205 1-114-385-11 ELECT CHIP 470uF 20% 6.3V C7404 1-118-459-11 CERAMIC CHIP 0.01uF 10% 25V
C7405 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V
Note 1: When the complete SUB MAIN board is replaced, refer to C7408 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V
“NOTE OF REPLACING THE IC7203 ON THE SUB MAIN
BOARD AND THE COMPLETE SUB MAIN BOARD” and
“NOTES ON THE WIRELESS CONNECTION (LINK) AF- Note 2: When C7233 and C7234 on the SUB MAIN board are replaced,
TER REPAIRS ARE COMPLETE” on page 5. refer to “BOND FIXATION OF ELECTRIC PARTS” on page 6.
26
SA-WCT380/WCT381
Ver. 1.1
SUB MAIN
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
C7409 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V < COIL >
C7410 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V L7102 1-481-751-21 INDUCTOR 6.8uH
C7411 1-116-724-11 CERAMIC CHIP 4.7uF 20% 6.3V L7103 1-400-789-21 INDUCTOR 2.2uH
C7412 1-118-403-11 CERAMIC CHIP 0.001uF 10% 50V L7201 1-469-555-21 INDUCTOR 10uH
C7413 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V L7202 1-482-176-11 INDUCTOR 20uH (See Note 3)
C7415 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V
< TRANSISTOR >
C7416 1-118-403-11 CERAMIC CHIP 0.001uF 10% 50V
C7419 1-116-743-11 CERAMIC CHIP 0.22uF 10% 16V Q7100 6-552-936-01 TRANSISTOR LTC014EUBFS8TL
C7420 1-118-459-11 CERAMIC CHIP 0.01uF 10% 25V Q7101 6-553-470-01 FET QM2401C1
C7421 1-118-742-11 CERAMIC CHIP 0.022uF 10% 16V Q7200 6-550-585-01 TRANSISTOR 2PC4081R-115
C7427 1-118-391-11 CERAMIC CHIP 0.01uF 10% 50V Q7202 8-729-013-22 TRANSISTOR HN1A01FU
Q7203 6-550-586-01 TRANSISTOR 2PA1576R-115
C7429 1-118-386-11 CERAMIC CHIP 0.1uF 10% 16V
C7430 1-118-289-11 CERAMIC CHIP 0.1uF 10% 16V Q7401 6-550-978-01 TRANSISTOR RN1902
C7431 1-165-492-21 ELECT CHIP 100uF 20% 10V Q7403 6-552-892-01 TRANSISTOR LSCR523UBFS8TL
CN7201 1-816-296-21 PIN, CONNECTOR (PC BOARD) 9P R7114 1-218-971-81 METAL CHIP 33K 5% 1/16W
CN7202 1-564-320-00 PIN, CONNECTOR (3.96 mm PITCH) 2P R7115 1-218-971-81 METAL CHIP 33K 5% 1/16W
CN7405 1-691-550-11 PIN, CONNECTOR (1.5 mm) (SMD) 3P R7116 1-218-965-11 METAL CHIP 10K 5% 1/16W
CN7406 1-815-763-71 CONNECTOR, FFC/FPC 24P R7118 1-216-864-11 SHORT CHIP 0
R7143 1-218-895-11 METAL CHIP 100K 0.5% 1/10W
< DIODE >
R7144 1-218-871-11 METAL CHIP 10K 0.5% 1/10W
D7102 6-503-775-01 DIODE CRH02 (T5R, SONY, XM) R7145 1-218-871-11 METAL CHIP 10K 0.5% 1/10W
D7401 6-502-961-01 DIODE DA2J10100L R7147 1-216-821-11 METAL CHIP 1K 5% 1/10W
R7148 1-216-836-11 METAL CHIP 18K 5% 1/10W
< EARTH TERMINAL > R7149 1-208-939-11 METAL CHIP 150K 0.5% 1/16W
* ET7201 1-780-408-11 TERMINAL, LUG * R7150 1-250-559-11 METAL CHIP 470K 1% 1/16W
R7151 1-250-547-11 METAL CHIP 150K 1% 1/16W
< FUSE > R7153 1-218-953-11 METAL CHIP 1K 5% 1/16W
R7205 1-218-990-81 SHORT CHIP 0
0 F72001 1-523-039-11 FUSE (5 A/32 V) R7206 1-218-937-11 METAL CHIP 47 5% 1/16W
< JUMPER RESISTOR > R7236 1-250-537-11 METAL CHIP 56K 1% 1/16W
R7237 1-250-535-11 METAL CHIP 47K 1% 1/16W
JC7205 1-216-864-11 SHORT CHIP 0 R7238 1-250-521-11 METAL CHIP 12K 1% 1/16W
JC7206 1-216-864-11 SHORT CHIP 0 R7239 1-218-977-11 METAL CHIP 100K 5% 1/16W
JC7207 1-216-864-11 SHORT CHIP 0 R7240 1-218-977-11 METAL CHIP 100K 5% 1/16W
JC7208 1-216-864-11 SHORT CHIP 0
JC7209 1-216-864-11 SHORT CHIP 0 R7241 1-218-977-11 METAL CHIP 100K 5% 1/16W
R7242 1-218-937-11 METAL CHIP 47 5% 1/16W
JC7214 1-216-864-11 SHORT CHIP 0 R7243 1-218-937-11 METAL CHIP 47 5% 1/16W
JC7215 1-216-864-11 SHORT CHIP 0 R7244 1-218-990-81 SHORT CHIP 0
R7245 1-218-990-81 SHORT CHIP 0
Note 1: When the IC7203 on the SUB MAIN board is replaced, refer to R7246 1-218-989-11 METAL CHIP 1M 5% 1/16W
“NOTE OF REPLACING THE IC7203 ON THE SUB MAIN R7247 1-218-956-11 METAL CHIP 1.8K 5% 1/16W
BOARD AND THE COMPLETE SUB MAIN BOARD” on R7400 1-218-941-81 METAL CHIP 100 5% 1/16W
page 5. R7401 1-218-941-81 METAL CHIP 100 5% 1/16W
Note 2: IC7400 on the SUB MAIN board cannot replace with single. Note 3: When L7202 on the SUB MAIN board is replaced, refer to
When this part is damaged, replace the complete mounted board. “BOND FIXATION OF ELECTRIC PARTS” on page 6.
27
SA-WCT380/WCT381
Ver. 1.1
SUB MAIN SUB POWER
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R7402 1-218-941-81 METAL CHIP 100 5% 1/16W A-2063-689-A SUB POWER BOARD, COMPLETE (US, CND)
A-2063-690-A SUB POWER BOARD, COMPLETE
R7403 1-218-941-81 METAL CHIP 100 5% 1/16W (Except US, CND)
R7405 1-218-941-81 METAL CHIP 100 5% 1/16W **************************
R7406 1-218-941-81 METAL CHIP 100 5% 1/16W
R7407 1-218-941-81 METAL CHIP 100 5% 1/16W 7-685-646-71 SCREW +BVTP 3X8 TYPE2 IT-3
R7408 1-218-965-11 METAL CHIP 10K 5% 1/16W
< CAPACITOR >
R7409 1-218-941-81 METAL CHIP 100 5% 1/16W
R7410 1-218-941-81 METAL CHIP 100 5% 1/16W 0 C902 1-112-870-51 CERAMIC 0.001uF 20% 250V
R7423 1-218-965-11 METAL CHIP 10K 5% 1/16W (US, CND) (See Note)
R7424 1-218-965-11 METAL CHIP 10K 5% 1/16W 0 C903 1-112-870-51 CERAMIC 0.001uF 20% 250V
R7425 1-218-965-11 METAL CHIP 10K 5% 1/16W (US, CND) (See Note)
0 C904 1-114-594-21 FILM 0.22uF 10% 310V
R7426 1-218-965-11 METAL CHIP 10K 5% 1/16W (US, CND) (See Note)
R7430 1-218-965-11 METAL CHIP 10K 5% 1/16W 0 C905 1-116-397-21 FILM 0.33uF 10% 310V
R7432 1-218-965-11 METAL CHIP 10K 5% 1/16W (Except US, CND) (See Note)
R7441 1-218-961-11 METAL CHIP 4.7K 5% 1/16W 0 C906 1-112-871-51 CERAMIC 0.0022uF 20% 250V
R7444 1-218-961-11 METAL CHIP 4.7K 5% 1/16W (Except US, CND) (See Note)
R7447 1-218-965-11 METAL CHIP 10K 5% 1/16W 0 C907 1-116-397-21 FILM 0.33uF 10% 310V
R7450 1-218-965-11 METAL CHIP 10K 5% 1/16W (Except US, CND) (See Note)
R7452 1-218-957-11 METAL CHIP 2.2K 5% 1/16W 0 C908 1-112-871-51 CERAMIC 0.0022uF 20% 250V
R7457 1-218-953-11 METAL CHIP 1K 5% 1/16W (Except US, CND) (See Note)
R7458 1-218-973-11 METAL CHIP 47K 5% 1/16W 0 C914 1-120-080-11 ELECT (BLOCK) 330uF 200V
(US, CND) (See Note)
R7459 1-218-965-11 METAL CHIP 10K 5% 1/16W 0 C915 1-118-715-11 ELECT (BLOCK) 100uF 20 % 450V
R7460 1-218-965-11 METAL CHIP 10K 5% 1/16W (Except US, CND) (See Note)
R7461 1-218-959-11 METAL CHIP 3.3K 5% 1/16W 0 C930 1-118-361-11 CERAMIC CHIP 0.1uF 10% 50V
R7462 1-218-959-11 METAL CHIP 3.3K 5% 1/16W
R7463 1-218-953-11 METAL CHIP 1K 5% 1/16W 0 C931 1-164-217-91 CERAMIC CHIP 150PF 5% 50V
(US, CND)
R7466 1-218-965-11 METAL CHIP 10K 5% 1/16W 0 C931 1-164-218-91 CERAMIC CHIP 180PF 5% 50V
R7467 1-218-977-11 METAL CHIP 100K 5% 1/16W (Except US, CND)
R7468 1-218-973-11 METAL CHIP 47K 5% 1/16W 0 C932 1-118-343-11 CERAMIC CHIP 4700PF 10% 50V
R7470 1-218-965-11 METAL CHIP 10K 5% 1/16W 0 C933 1-116-717-11 CERAMIC CHIP 10uF 20% 10V
R7488 1-218-965-11 METAL CHIP 10K 5% 1/16W 0 C934 1-118-478-11 CERAMIC CHIP 2.2uF 10% 10V
R7489 1-218-965-11 METAL CHIP 10K 5% 1/16W 0 C935 1-117-824-11 FILM 2200PF 3% 1.5KV
R7495 1-218-957-11 METAL CHIP 2.2K 5% 1/16W (US, CND) (See Note)
R7496 1-218-957-11 METAL CHIP 2.2K 5% 1/16W 0 C936 1-118-361-11 CERAMIC CHIP 0.1uF 10% 50V
R7502 1-250-531-11 METAL CHIP 33K 1% 1/16W 0 C937 1-116-874-11 CERAMIC CHIP 10uF 10% 35V
R7503 1-250-535-11 METAL CHIP 47K 1% 1/16W 0 C938 1-125-893-11 FILM 680PF 3% 1.5KV
(Except US, CND) (See Note)
* R7504 1-250-527-11 METAL CHIP 22K 1% 1/16W 0 C939 1-116-034-92 FILM 0.0033uF 5% 400V
R7507 1-218-990-81 SHORT CHIP 0 (See Note)
R7508 1-218-990-81 SHORT CHIP 0
R7509 1-218-990-81 SHORT CHIP 0 0 C940 1-112-869-51 CERAMIC 470PF 10% 250V
R7510 1-218-953-11 METAL CHIP 1K 5% 1/16W (US, CND)
0 C941 1-112-235-21 ELECT 330uF 20% 25V
R7511 1-218-953-11 METAL CHIP 1K 5% 1/16W C965 1-112-723-21 CERAMIC CHIP 0.0047uF 10% 250V
R7513 1-218-990-81 SHORT CHIP 0 C967 1-114-994-11 ELECT 2200uF 20% 35V
R7514 1-218-990-81 SHORT CHIP 0 (See Note)
R7517 1-218-941-81 METAL CHIP 100 5% 1/16W C968 1-118-361-11 CERAMIC CHIP 0.1uF 10% 50V
R7519 1-218-941-81 METAL CHIP 100 5% 1/16W
C970 1-112-241-11 ELECT 1000uF 20% 25V
R7520 1-218-941-81 METAL CHIP 100 5% 1/16W (See Note)
R7521 1-218-941-81 METAL CHIP 100 5% 1/16W C971 1-118-345-11 CERAMIC CHIP 0.01uF 10% 25V
R7522 1-218-941-81 METAL CHIP 100 5% 1/16W C976 1-112-426-11 ELECT 47uF 20% 35V
R7523 1-218-947-11 METAL CHIP 330 5% 1/16W (See Note)
R7524 1-218-945-11 METAL CHIP 220 5% 1/16W C977 1-112-426-11 ELECT 47uF 20% 35V
(See Note)
R7525 1-218-990-81 SHORT CHIP 0 C978 1-126-964-11 ELECT 10uF 20% 50V
(See Note)
< VIBRATOR >
C980 1-112-426-11 ELECT 47uF 20% 35V
X7201 1-814-881-11 QUARTZ CRYSTAL UNIT (12.288 MHz) (See Note)
X7400 1-781-646-21 VIBRATOR, CERAMIC (4 MHz) 0 C988 1-114-721-21 FILM 0.1uF 10% 310V
************************************************************* (US, CND) (See Note)
Note: When C902 to C908, C914, C915, C935, C938, C939, C967, C970, C976 to C978, C980 and C988 on
the SUB POWER board are replaced, refer to “BOND FIXATION OF ELECTRIC PARTS” on page 6.
28
SA-WCT380/WCT381
Ver. 1.2
SUB POWER
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
< CONNECTOR > 0 R934 1-248-245-11 METAL 0.15 5% 2W F
(US, CND)
0 * CN901 1-793-660-11 PIN, CONNECTOR (PC BOARD) 3P 0 R935 1-216-825-91 METAL CHIP 2.2K 5% 1/10W
0 R936 1-216-841-91 METAL CHIP 47K 5% 1/10W
< DIODE > 0 R937 1-216-829-91 METAL CHIP 4.7K 5% 1/10W
0 R938 1-216-838-91 METAL CHIP 27K 5% 1/10W
0 D901 8-719-077-77 DIODE D3SB60F3 (See Note 1)
0 D930 6-503-032-01 DIODE DZ2J180M0L 0 R944 1-215-927-51 METAL OXIDE 47K 5% 3W F
0 D931 8-719-083-71 DIODE UDZSUSTE-1730B (US, CND) (See Note 1)
0 D932 6-502-975-01 DIODE DZ2J15000L 0 R944 1-215-929-51 METAL OXIDE 100K 5% 3W F
0 D934 6-503-032-01 DIODE DZ2J180M0L (Except US, CND) (See Note 1)
0 R945 1-216-809-91 METAL CHIP 100 5% 1/10W
0 D935 8-719-083-71 DIODE UDZSUSTE-1730B 0 R947 1-216-793-91 METAL CHIP 4.7 5% 1/10W
0 D936 6-501-119-01 DIODE RR264M-400 R951 1-216-843-11 METAL CHIP 68K 5% 1/10W
0 D937 6-501-119-01 DIODE RR264M-400
0 D938 6-503-731-01 DIODE SARS10 R952 1-216-821-11 METAL CHIP 1K 5% 1/10W
0 D939 6-503-037-01 DIODE DZ2J24000L 0 R953 1-216-793-91 METAL CHIP 4.7 5% 1/10W
0 R954 1-216-793-91 METAL CHIP 4.7 5% 1/10W
0 D941 8-719-083-71 DIODE UDZSUSTE-1730B 0 R955 1-216-864-91 SHORT CHIP 0
0 D942 6-503-775-01 DIODE CRH02 (T5R, SONY, XM) R965 1-216-821-11 METAL CHIP 1K 5% 1/10W
D965 6-501-849-01 DIODE FMX-22SL
D967 6-503-978-01 DIODE RB068L100TE25 R971 1-216-849-11 METAL CHIP 220K 5% 1/10W
0 D972 6-502-264-01 DIODE KDZTR18B R976 1-216-823-11 METAL CHIP 1.5K 5% 1/10W
R977 1-218-887-11 METAL CHIP 47K 0.5% 1/10W
D973 8-719-083-71 DIODE UDZSUSTE-1730B R978 1-218-863-11 METAL CHIP 4.7K 0.5% 1/10W
R987 1-216-821-11 METAL CHIP 1K 5% 1/10W
< FUSE >
0 R997 1-216-864-91 SHORT CHIP 0
0 F901 1-523-067-51 FUSE (5 A/250 V)
0 F931 1-523-085-11 FUSE (2.5 A/250 V) < TRANSFORMER >
Note 1: When D901, L966, LF901, R944, TH901 and VDR901 Note 3: When the RF modulator (Ref. No. RF1) is replaced, refer
on the SUB POWER board are replaced, refer to “BOND to “NOTES ON THE WIRELESS CONNECTION (LINK)
FIXATION OF ELECTRIC PARTS” on page 6. AFTER REPAIRS ARE COMPLETE” on page 5.
29
SA-WCT380/WCT381
REVISION HISTORY
1.2 2015.05 Addition of Russian, Latin American, Argentina and Thai models (SA-WCT380)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF file search function to find one.