Professional Documents
Culture Documents
STUDY GUIDE (1) Eim
STUDY GUIDE (1) Eim
INTRODUCTION: This unit covers the knowledge, skills and attitudes on installing electrical metallic
and non-metallic conduit, wire ways and cable clamp, auxiliary terminal cabinet and
distribution frame panel board/ safety switch and used in roughing – in based on the
required performance standards.
This unit also covers the outcomes required in preparing for cable pulling and
installation, performing wiring and cabling lay-out and notifying completion of work
for single – phase distribution, power, lighting and auxiliary systems.
OBJECTIVES
KEY CONCEPTS
UNIT 1:
Install electrical metallic /nonmetallic (PVC conduit)
UNIT 2:
Install wire ways and cable tray
UNIT 3:
Install auxiliary terminal cabinet and distribution panel
UNIT 4:
Prepare for cable pulling and installation
UNIT 5:
Perform wiring and cabling lay out
LEARNING RESOURCES
1. Self-paced Learning Materials uploaded in LMS (Interactive Book-type lessons, H5Ps,
Online presentations, etc.)
2. Webinars
3. Demonstration Videos
4. Lecture Videos
5. Task Sheets and Performance Criteria Checklist
STUDY QUESTIONS
Unit 1:
Install electrical metallic/ non-metallic (PVC Conduit)
1. What are the different types of electrical conduits?
2. When performing a wiring installation, what materials did you ready first?
3. What are the uses and applications of different types of electrical conduits?
Unit 2:
Install wire ways and cable tray
1. What is Wire Ways and Cable Tray?
2. What is the purpose of Wire Ways and Cable Tray?
3. Applications of Wire Ways and Cable Tray?
Unit 3:
Install auxiliary terminal cabinet and distribution panel
1. What is Auxiliary Terminal Cabinet and Distribution Panel?
2. How to install Auxiliary Terminal Cabinet and Distribution Panel?
3. How to use Auxiliary Terminal Cabinet and Distribution Panel?
Unit 4:
Prepare for cable pulling and installation
1. What are the different types of cables?
2. What tools and equipment when performing cable pulling?
3. What procedure when performing cable pulling?
Unit 5:
Prepare wiring and cabling lay out
1. What is symbol and their purpose in electrical plan?
2. What is blueprint and usage?
3. How to read electrical plan?
A. Online Activities
1. Orientation
a. Attend the Trainees Induction Program to be held via Google Meet Webinar on July 26, 2020,
08:00 AM: https://meet.google.com/hvv-xhgy-zae?authuser=0
b. Access the LMS (Learning Management System),
https://ptctarlacxfelsr3.gnomio.com/course/view.php?id=44 and read the Study Guide.
c. Participate in the Discussion forum (Self – Introduction)
d. Take the Pre-test
e. Based on your assigned Learning Outcome, meet with your facilitators and groupmates,
3. Activities
a. Read eLearning contents in books and presentations
b. Play videos
c. Use interactive eLearning materials
d. Take Quizzes; (Graded)
e. Participate in Forums; (Required)
B. Offline Activities
2. Institutional Assessment
a. Computer -based test
b. Demonstration with questioning (Face to Face)
STUDY SCHEDULE
Please refer to the schedule for your reference
REFERENCES:
1. E-Training Regulations on Electrical Installation and Maintenance NCII
2. CBLM on Perform roughing-in, wiring and cabling works for single-phase distribution, power,
lighting and auxiliary systems
3. Online Researches, Journals/Articles