Professional Documents
Culture Documents
Claas Ares-500 en
Claas Ares-500 en
557 547
• Only machine in its class with a fully-sprung cab, which is supported on four spring elements
claas.com
09/07 (Be) englisch 10 /000 256 157.0 A partner
• 320° view over all implements you can rely on.
• Up to 8 work lights (H3 + H7) for optimum illumination
• High-torque, fuel-saving engines from 90 HP to 100 HP rated power output (ECE R 24)
• One of the most agile tractors in its class with a 4.40 m turning circle and a max. 55° steering lock angle
• Quick and simple servicing and maintenance work without the need for tools
claas.com
ARES 547 ARES 557 ARES 547 ARES 557
HYDRAULICS Ty r e o p t i o n s
Open centre Circuit 1 1 Front axle Rear axle
Flow at rated speed (l./min.) 60 60 11.2 R 28 (280/85 R 28) 13.6 R 38 (340/85 R 38) 1 1
Maximum pressure (Bar) 200 200 14.9 R 24 (380/85 R 24) 16.9 R 34 (420/85 R 34) 1 -
Auxiliary valves (mini - maxi) 2-4 2-4 13.6 R 28 (380/70 R 28) 16.9 R 38 (420/85 R 38) 1 1
Flow control 1 1 14.9 R 24 (380/85 R 24) 18.4 R 34 (460/85 R 34) 1 1
14.9 R 28 (380/85 R 28) 18.4 R 38 (460/85 R 38) - 1
POWER LIFT 420/70 R 24 480/70 R 34 1 -
Max. lifting capacity at the link ends 6500 6500 380/70 R 28 480/70 R 38 1 1
Lift capacity through complete range at 610 mm (kg) OCDE 4100 4100 420/70 R 24 520/70 R 34 1 1
Travel of lift arms (mm) 735 735 420/70 R 28 520/70 R 38 - 1
Hitch damper 1 1 440/65 R 24 540/65 R 34 1 -
Hydraulic trailer brake ! ! 440/65 R 28 540/65 R 38 1 1
Pneumatic trailer brake ! ! 480/65 R 28 600/65 R 38 - 1
Trailer plug 1 1
25 amp. Plug 1 1 All tyre combinations of adjustable/fixed rims possible
CABIN
ATX 1 1
Dimensions
ATZ ! !
Noise level (db [A]) 73 73 Height
Air conditionning 1 1
Rear tyres 16.9 R 38 18.4 R 38
Passenger seat ! !
Front tyres 13.6 R 28 14.9 R 28
Cooled box ! !
a Height rear axle/roof (mm) 2085 2085
b Overall height (mm) 2880 2905
WEIGHT (standard tyres / fuel tank full / without driver)
Rear tyres 16.9 R 38 18.4 R 38
Front tyres 13.6 R 28 14.9 R 28 Length
Weight w/o ballast - ATX (kg) 4680 4720 c Wheelbase (mm) 2564 2564
Weight w/o ballast - ATZ (kg) 4780 4820 d Distance rear axle - lower linkage (mm) 1132 1132
Ballast from factory (kg) 508 644 e Length (front weights and rear linkage) (mm) 4720 4720
Weight distribution with ballast (front / rear) (%) 47 / 53 49 / 51
Maximum permissible weight (kg) 8000 8000
Ground c learance
f Front (mm) 510 510
Corresponding front tyres 480/65 R 28 480/65 R 28
g Rear (mm) 400 400
Corresponding rear tyres 540/65 R 38 540/65 R 38
f g
c d
e
CLAAS continually strives to adapt its products to meet practical requirements. Thus, all products are subject to changes. All descriptions and specifications in this
brochure should be considered as approximate and may include optional equipment that is not part of the standard specifications. This brochure is designed for
worldwide use. Please refer to your nearest CLAAS dealer and their price list for local specification details. Some protective panels may have been removed for
photographic purposes in order to present the function clearly. Never remove these protective panels yourself, to avoid any risk of danger. In this respect, please
refer to the relevant instructions in the operator's manual.
The ARES has been impressing
Smooth transmission.
Engines 14
HEXASHIFT/HEXACTIV 16
Hydraulic system 24
Stability 26
3
The CLAAS
comfort concept.
6
Added driving comfort point by point.
• Straightforward operation
Comfort concept
7
Space. Visibility. Quiet. Comfort. The ARES 500 is the only tractor in its class to be equipped
with a fully-sprung cab (ATZ models), which is supported
Four fundamental requirements to on four spring elements. As a result, almost all of the
guarantee your sense of well-being vibrations from the axles and chassis are absorbed.
Choose the ARES and your back will thank you for it.
and relaxation in the workplace.
The powerful air conditioning system ensures comfort-
In the ARES 500, you are guaranteed perfect visibility over able working conditions, no matter what the weather.
all of your implements. The generously proportioned And if it really gets hot, just help yourself to an ice-cold
glazed areas and the slim cab pillars ensure excellent 320 refreshment from the coolerbox in the dashboard.
degree vision. The large rear window provides an excellent
view of the implements. The wide, front-opening roof The ARES 500 light concept: up to 8 work lights
(optional) gives excellent overhead visibility. (H3 + H7) illuminate even the darkest corner of the field.
8
More comfort.
You and your
back deserve it.
Ergonomic controls
Only machine in its class with a fully-sprung cab, Spacious cab
which is supported on four spring elements. 4 point cab suspension
Kind to your back
9
Good tractors
are like
good friends.
Reliable
from day one.
10
Our engineers construct tractors On the ARES 500, all controls are within easy reach. All of
the controls and instruments on the newly developed
according to a very simple motto: dashboard are arranged in an ergonomic design to create
machines must adapt to people a healthier working environment.
rather than the other way around. You can comfortably regulate the engine speed and tractor
Drivers should be able to start speed, along with all of the HEXASHIFT’s shifting functions
using the throttle control. The fingertip lever guarantees full
operating their tractors without first control of your working speed, allowing you to concentrate
having to wade through a huge fully on your implements. A well laid out and easy-to-read
display provides all of the information relevant to your
instruction manual. Good tractors work. No other tractor could assist you more effectively
are easy and uncomplicated to in your day-to-day work.
operate.
Straightforward operation
11
Very special
technology.
The ARES 500 is equipped with the latest 4.5 litre four-
cylinder engines with turbocharger. Electronically controlled
injection ensures an accurate dose of fuel whilst at the
same time ensuring low consumption. Its vast tractive force
offers impressive performance, even in the lower speed
range. And thanks to its enormous torque backup, the
ARES 500 offers power reserves to ensure sufficient power
even when working in changeable ground conditions.
14
The perfect stepping of the new HEXASHIFT transmission
with six powershift stages and use of the ECO power
takeoff provide additional fuel savings. Four PTO speeds
are available by engaging the electronically controlled
multi-disc clutch.
Powerful four-cylinder
A lower number of revolutions at maximum
engine with 4.5 litres
speed provides low fuel consumption.
cubic capacity
15
Demanding field work or rapid road 24/24 HEXASHIFT transmission:
transport? Full steam ahead without
• Six powershift stages
wasting fuel. With its comfortable
HEXASHIFT transmission, the ARES • Four automated ranges
500 knows the perfect answer in any • Manoeuvring gear to facilitate headland turning
situation.
• Creep gear starting at 410 m/h (optional)
16
From zero
to top speed
without lifting
a finger.
24/24 HEXASHIFT
transmission
HEXACTIV
automatic transmission
(optional)
17
Working in tough field conditions?
HEXASHIFT
Six powershift stages Need to reverse rapidly with the front
loader? The powerful HEXASHIFT
transmission on the ARES 500
Four hydraulically
controlled ranges masters any task with optimum
power and defines a whole new
class in driving comfort.
18
No gear shift lever
and no clutch pedal.
With HEXASHIFT, the touch
of a button is all it takes.
Laboursaving HEXASHIFT
transmission.
• 6 powershift stages
• 4 automated ranges
HEXASHIFT
6-stage powershift
19
Drives like an automatic car –
with HEXACTIV,
all you need
is the accelerator.
In many situations even the touch If required, simply deactivate manual shifting and hand
of a button may be too tricky. over the controls to the optional HEXACTIV automatic
transmission. This automatic transmission carries driving
and operating comfort to the extreme. Simply press the
accelerator and the HEXACTIV automatic transmission
Robotised Ranges automatically shifts to the desired maximum speed.
POWERSHIFT Speeds
6
5 With 24 forward and reverse gears, manoeuvring couldn’t
4
D be easier. If you shift a range in field mode, then HEXACTIV
3
2 will select the powershift stage that is closest to your
1
6 actual speed. The six powershift gears are shifted auto-
5
4
matically in relation to the engine speed and position of
C
3 the accelerator pedal. In transport mode the system
2
1 automatically shifts both powershift stages and ranges.
6
5
4 Consequently, HEXACTIV ensures that you always travel
B 3
2 in the correct gear and at an optimum speed. Also avail-
1 able in fuel-saving ECO mode, or in POWER mode for
6
5 40 km/h transmission when you need maximum power.
4 from 1,500 rpm to 2,200 rpm
A 3 tyres 18.4 R 38
2
1
km/h 0 5 10 15 20 25 30 35 40 45 50
20
HEXACTIV shifts automatically.
• Drive the ARES like an automatic car –
using only the accelerator
21
Hard work can’t be
performed single-handedly.
Or can it?
22
For example, you can operate the front loader with your
right hand while controlling REVERSHIFT, the hydraulic
shuttle reverser, with your left.
In fact, with the REVERSHIFT you don’t even need to use
your whole hand. A touch of your fingertips is enough to
effortlessly change the direction of travel on the ARES 500,
no matter what speed or gear is selected. It saves time
and considerably increases your daily output.
ELECTROPILOT
REVERSHIFT
Efficient driving modes
Headland gear
23
True friends
are always ready
to lend a
helping hand.
24
You can operate the linkage of the ARES 500 with the
TCE 15 terminal. The system is powered by an electronic
linkage control (Bosch EHR), which always guarantees
maximum traction.
Powerful hydraulics
25
The longest wheel base
in its class.
Yet as agile as a cat.
26
Exceptional tractive force. Because it can
also be ballasted at the front, the ARES Impressive manoeuvrability
provides an ideal weight distribution: 50% Maximum stability
at the front and 50% at the rear.
27
Reliability for your
peace of mind.
Reduced maintenance times
FIRST CLAAS SERVICE® around the clock Maintenance and service
Technical information
Not a single second
wasted. Particularly
when it comes to
maintenance.
30
On the ARES 500, maintenance and
servicing tasks are no longer a chore.
Accessing the relevant areas on the
machine is extremely quick and
simple.
And that’s not all that will save you time: The cab filter is
no longer located in the roof, but can now be accessed
easily from the front of the cab.
Reduced
maintenance times
31
Build on the professionalism and ARES health checks.
reliability of our FIRST CLAAS
Today, machine settings, control processes, monitoring
SERVICE® team with each operating and much, much more would be inconceivable without
minute of your ARES 500. CLAAS the use of electronics. The electronics preinstalled in the
machines perform diagnostic checks to enable defects to
importers and sales partners provide be detected more easily. If your ARES 500 fails to meet
optimum spare parts supply and your performance expectations, simply call our FIRST
CLAAS SERVICE team. Our experienced specialists will
reliable round-the-clock customer bring the latest diagnostic equipment to you, no matter
service worldwide. where you are.
32
Partners you
can rely on.
No matter
where or when.
Think profitably,
secure your success!
33
ARES
TRANSMISSION
Gears 24/24 24/24
Speed (mini / maxi) (kph) 1,62 – 40 1,67 – 40
REVERSHIFT Powershuttle 1 1
Number of Powershift Speeds 6 6
Number of Robotised Ranges 4 4
HEXACTIV ! !
Creeper (kph) 0,41 0,42
REAR AXLE
Electro-hydraulic differential lock 1 1
Differential lock auto management 1 1
Maximum Rear Tyre 16,9 R 38 18,4 R 38
PTO
Multi-Discs clutch 1 1
Remote emergency stop 1 1
540/1000 1 1
540(E)/1000(E) ! !
Interchangeable stub shafts 1 1
Number of splines 6/21 6/21
4 WD FRONT AXLE
Electro-Hydraulic Engagement 1 1
4WD auto management 1 1
Steering angle (°) 55 55
Castor angle (°) 6 6
Compensation angle (°) 10 10
Steering radius (m) 4,4 4,4
Corresponding track (mm) 1814 1814
Corresponding tyres 13.6 R 28 13.6 R 28
Multi-discs clutch 1 1
Fixed fenders ! !
Semi pivoting fenders ! !
1 Standard ! Option - not possible
34
ARES 547 ARES 557 ARES 547 ARES 557
HYDRAULICS Ty r e o p t i o n s
Open centre Circuit 1 1 Front axle Rear axle
Flow at rated speed (l./min.) 60 60 11.2 R 28 (280/85 R 28) 13.6 R 38 (340/85 R 38) 1 1
Maximum pressure (Bar) 200 200 14.9 R 24 (380/85 R 24) 16.9 R 34 (420/85 R 34) 1 -
Auxiliary valves (mini - maxi) 2-4 2-4 13.6 R 28 (380/70 R 28) 16.9 R 38 (420/85 R 38) 1 1
Flow control 1 1 14.9 R 24 (380/85 R 24) 18.4 R 34 (460/85 R 34) 1 1
14.9 R 28 (380/85 R 28) 18.4 R 38 (460/85 R 38) - 1
POWER LIFT 420/70 R 24 480/70 R 34 1 -
Max. lifting capacity at the link ends 6500 6500 380/70 R 28 480/70 R 38 1 1
Lift capacity through complete range at 610 mm (kg) OCDE 4100 4100 420/70 R 24 520/70 R 34 1 1
Travel of lift arms (mm) 735 735 420/70 R 28 520/70 R 38 - 1
Hitch damper 1 1 440/65 R 24 540/65 R 34 1 -
Hydraulic trailer brake ! ! 440/65 R 28 540/65 R 38 1 1
Pneumatic trailer brake ! ! 480/65 R 28 600/65 R 38 - 1
Trailer plug 1 1
25 amp. Plug 1 1 All tyre combinations of adjustable/fixed rims possible
CABIN
ATX 1 1
Dimensions
ATZ ! !
Noise level (db [A]) 73 73 Height
Air conditionning 1 1
Rear tyres 16.9 R 38 18.4 R 38
Passenger seat ! !
Front tyres 13.6 R 28 14.9 R 28
Cooled box ! !
a Height rear axle/roof (mm) 2085 2085
b Overall height (mm) 2880 2905
WEIGHT (standard tyres / fuel tank full / without driver)
Rear tyres 16.9 R 38 18.4 R 38
Front tyres 13.6 R 28 14.9 R 28 Length
Weight w/o ballast - ATX (kg) 4680 4720 c Wheelbase (mm) 2564 2564
Weight w/o ballast - ATZ (kg) 4780 4820 d Distance rear axle - lower linkage (mm) 1132 1132
Ballast from factory (kg) 508 644 e Length (front weights and rear linkage) (mm) 4720 4720
Weight distribution with ballast (front / rear) (%) 47 / 53 49 / 51
Maximum permissible weight (kg) 8000 8000
Ground c learance
f Front (mm) 510 510
Corresponding front tyres 480/65 R 28 480/65 R 28
g Rear (mm) 400 400
Corresponding rear tyres 540/65 R 38 540/65 R 38
f g
c d
e
CLAAS continually strives to adapt its products to meet practical requirements. Thus, all products are subject to changes. All descriptions and specifications in this
brochure should be considered as approximate and may include optional equipment that is not part of the standard specifications. This brochure is designed for
worldwide use. Please refer to your nearest CLAAS dealer and their price list for local specification details. Some protective panels may have been removed for
photographic purposes in order to present the function clearly. Never remove these protective panels yourself, to avoid any risk of danger. In this respect, please
refer to the relevant instructions in the operator's manual.
ARES 547 ARES 557 ARES 547 ARES 557
HYDRAULICS Ty r e o p t i o n s
Open centre Circuit 1 1 Front axle Rear axle
Flow at rated speed (l./min.) 60 60 11.2 R 28 (280/85 R 28) 13.6 R 38 (340/85 R 38) 1 1
Maximum pressure (Bar) 200 200 14.9 R 24 (380/85 R 24) 16.9 R 34 (420/85 R 34) 1 -
Auxiliary valves (mini - maxi) 2-4 2-4 13.6 R 28 (380/70 R 28) 16.9 R 38 (420/85 R 38) 1 1
Flow control 1 1 14.9 R 24 (380/85 R 24) 18.4 R 34 (460/85 R 34) 1 1
14.9 R 28 (380/85 R 28) 18.4 R 38 (460/85 R 38) - 1
POWER LIFT 420/70 R 24 480/70 R 34 1 -
Max. lifting capacity at the link ends 6500 6500 380/70 R 28 480/70 R 38 1 1
Lift capacity through complete range at 610 mm (kg) OCDE 4100 4100 420/70 R 24 520/70 R 34 1 1
Travel of lift arms (mm) 735 735 420/70 R 28 520/70 R 38 - 1
Hitch damper 1 1 440/65 R 24 540/65 R 34 1 -
Hydraulic trailer brake ! ! 440/65 R 28 540/65 R 38 1 1
Pneumatic trailer brake ! ! 480/65 R 28 600/65 R 38 - 1
Trailer plug 1 1
25 amp. Plug 1 1 All tyre combinations of adjustable/fixed rims possible
CABIN
ATX 1 1
Dimensions
ATZ ! !
Noise level (db [A]) 73 73 Height
Air conditionning 1 1
Rear tyres 16.9 R 38 18.4 R 38
Passenger seat ! !
Front tyres 13.6 R 28 14.9 R 28
Cooled box ! !
a Height rear axle/roof (mm) 2085 2085
b Overall height (mm) 2880 2905
WEIGHT (standard tyres / fuel tank full / without driver)
Rear tyres 16.9 R 38 18.4 R 38
Front tyres 13.6 R 28 14.9 R 28 Length
Weight w/o ballast - ATX (kg) 4680 4720 c Wheelbase (mm) 2564 2564
Weight w/o ballast - ATZ (kg) 4780 4820 d Distance rear axle - lower linkage (mm) 1132 1132
Ballast from factory (kg) 508 644 e Length (front weights and rear linkage) (mm) 4720 4720
Weight distribution with ballast (front / rear) (%) 47 / 53 49 / 51
Maximum permissible weight (kg) 8000 8000
Ground c learance
f Front (mm) 510 510
Corresponding front tyres 480/65 R 28 480/65 R 28
g Rear (mm) 400 400
Corresponding rear tyres 540/65 R 38 540/65 R 38
f g
c d
e
CLAAS continually strives to adapt its products to meet practical requirements. Thus, all products are subject to changes. All descriptions and specifications in this
brochure should be considered as approximate and may include optional equipment that is not part of the standard specifications. This brochure is designed for
worldwide use. Please refer to your nearest CLAAS dealer and their price list for local specification details. Some protective panels may have been removed for
photographic purposes in order to present the function clearly. Never remove these protective panels yourself, to avoid any risk of danger. In this respect, please
refer to the relevant instructions in the operator's manual.
ARES
557 547
• Only machine in its class with a fully-sprung cab, which is supported on four spring elements
claas.com
09/07 (Be) englisch 10 /000 256 157.0 A partner
• 320° view over all implements you can rely on.
• Up to 8 work lights (H3 + H7) for optimum illumination
• High-torque, fuel-saving engines from 90 HP to 100 HP rated power output (ECE R 24)
• One of the most agile tractors in its class with a 4.40 m turning circle and a max. 55° steering lock angle
• Quick and simple servicing and maintenance work without the need for tools
claas.com
ARES
557 547
• Only machine in its class with a fully-sprung cab, which is supported on four spring elements
info-uk@claas.com
09/07 (Be) englisch 5 A partner
• 320° view over all implements you can rely on.
• Up to 8 work lights (H3 + H7) for optimum illumination
• High-torque, fuel-saving engines from 90 HP to 100 HP rated power output (ECE R 24)
• One of the most agile tractors in its class with a 4.40 m turning circle and a max. 55° steering lock angle
• Quick and simple servicing and maintenance work without the need for tools
claas.com