Professional Documents
Culture Documents
Casing Running Tool and Stabbing Board
Casing Running Tool and Stabbing Board
v=hwyXbAj-9D8
https://m.youtube.com/watch?v=CSdAjtFLusg
I am currently pushing them for a quick reply from their structural department about the reverse
engineering of the stabbing board And to have a clear figure for the SWL ; let's give it more two
days ,otherwise we can work the next casing job with Torkdrive running tool
In parallel ,we need to provide the drawings and pictures for the existing stabbing board to NOV to be
sure that we do not have discrepancy between original design and existing one Before sending it to
them for recertification ; and being surprised about a bigger SOW than expected
HASSAN TOLBA
Global Maintenance, Reliability And Well Control Manager
TEL: +971 4407 1800
DIR: +971 4407 1916
MOB: +971 506555782
FAX: +971 4323 5547
-----Original Message-----
From: Kashirskiy, Pavel
Sent: Thursday, January 26, 2017 7:54 PM
To: Tolba, Hassan M; Marimuthu, Ramesh
Cc: Buckner, Larry; Strength, Michael L
Subject: RE: [EXTERNAL] RE: [EXTERNAL] RE: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] RE: [EXTERNAL]
COC for the casing stabbing board of the mast E8230736 Rig 173
Gents,
Could you please communicate to NOV that if this engineering study requires payment, we are ready to
pay. Alternatively we will have about a week till next casing job so if that board requires to be brought
into NOV workshop for verifications we can do that.
Otherwise I see no other solution rather than procuring new board or paying for overdrive system from
Weatherford to RIH casing without a stabber and stabbing board.
Regards,
Pavel
-----Original Message-----
From: Nayak, Vishal V [mailto:Vishal.Nayak@nov.com]
Sent: Thursday, January 26, 2017 6:17 PM
To: Tolba, Hassan M; RA-ARE-Tech Support MENA; Chehade, Georges
Cc: Marimuthu, Ramesh; Hamdan, Hussein; Chehade, Elie; Lisa, Praveen C; Subramanya, Prasad A; Asset
Certification KSA; Fadel, Gerges; Nair, Manoj Kumar U; Moussaoui, Salma; Strength, Michael L;
MaintenanceManager, KSA; Agius, Lawrence; Kashirskiy, Pavel
Subject: [EXTERNAL] RE: [EXTERNAL] RE: [EXTERNAL] RE: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] RE:
[EXTERNAL] COC for the casing stabbing board of the mast E8230736 Rig 173
Hello Hassan,
We have not got any feedback yet from engineering. We will follow up today on this and see what will
be the final answer from engineering. Kindly note that at the moment, there is very less chance that we
can have the requested data available because this depends on feasibility of engineering study. In any
case, we will revert back shortly and let you know.
-----Original Message-----
From: Tolba, Hassan M [mailto:Hassan.Tolba@wdidrilling.com]
Sent: Thursday, January 26, 2017 6:16 PM
To: Nayak, Vishal V; RA-ARE-Tech Support MENA; Chehade, Georges
Cc: Marimuthu, Ramesh; Hamdan, Hussein; Chehade, Elie; Lisa, Praveen C; Subramanya, Prasad A; Asset
Certification KSA; Fadel, Gerges; Nair, Manoj Kumar U; Moussaoui, Salma; Strength, Michael L;
MaintenanceManager, KSA; Agius, Lawrence; Kashirskiy, Pavel
Subject: [EXTERNAL] RE: [EXTERNAL] RE: [EXTERNAL] RE: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] RE:
[EXTERNAL] COC for the casing stabbing board of the mast E8230736 Rig 173
Importance: High
Gents
Could you please advise urgently for the below ; we might need to go for a casing job very soon and we
will need the SWL to conduct a load testing
WDI, Rasis Business Centre, 6th Floor, Al Barsha 1 PO Box 58014, Dubai, UAE WDIdrilling.com
-----Original Message-----
From: Kashirskiy, Pavel
Sent: Thursday, January 26, 2017 9:24 AM
To: Nayak, Vishal V; Tolba, Hassan M
Cc: RA-ARE-Tech Support MENA; Marimuthu, Ramesh; Hamdan, Hussein; Chehade, Elie; Lisa, Praveen C;
Subramanya, Prasad A; Asset Certification KSA; Fadel, Gerges; Nair, Manoj Kumar U; Moussaoui, Salma;
Strength, Michael L; MaintenanceManager, KSA; Agius, Lawrence
Subject: Re: [EXTERNAL] RE: [EXTERNAL] RE: [EXTERNAL] Re: [EXTERNAL] Re: [EXTERNAL] RE: [EXTERNAL]
COC for the casing stabbing board of the mast E8230736 Rig 173
Regards,
Pavel
Sent from my iPhone