Professional Documents
Culture Documents
Solenoid valve
Type EV210B
AI200686429133en-001301
Solenoid valve, type EV210B
1 Portfolio overview
2 Functions
2.1 Function NC
Coil voltage disconnected (closed):
When the voltage to the coil (5) is disconnected, the armature (2) with the valve plate (3) is pressed down against
the valve orifice (4) by the closing spring (1) and the medium,s pressure.
The valve will be closed for as long as the voltage to the coil is disconnected.
The valve is now open for unimpeded flow and will be open for as long as there is voltage to the coil.
Figure 1: Function NC
1 Closing spring
2 Armature
3 Valve plate
1 4 Valve orifice
5 Coil
5 3
2.2 Function NO
Coil voltage connected (open):
When the voltage to the coil(8) is disconnected, the valve orifice (5) is open, the opening spring (2) lifting the
spindle (3) with the valve plate (4) clear of the orifice.
The valve will be open for as long as the supply voltage to the coil is disconnected.
The valve will be closed for as long as there is voltage to the coil.
Figure 2: Function NO
1 Armature
1 2 Opening spring
2 3 Spindle
3 4 Valve plate
4 5 Valve orifice
6 Closing spring
5
8 7 Fixed base
7 8 Coil
3 Applications
It is recommended to use a filter in front of the valve. Recommended filter 50 mesh (297 microns).
Figure 3: Filter
In water applications, exercise the valves at least once every 24 hours, meaning change the state of the valve. The
valve exercise will minimize the risk of the valve sticking due to calcium carbonate, zinc or iron oxide build-up.
ON
OFF
24h
To minimize scaling, and corrosion attack it is recommended that the water passing the valve have the following
values:
• Hardness 6 - 18 °dH to avoid scaling (chalk / lime stone build up)
• Conductivity 50 – 800 µS/cm to avoid brass dezincification and corrosion
• Above 25 °C media temperature avoid stagnant water inside the valve to avoid dezincification and corrosion
attack
4 Product specification
Capacity diagrams
Example, water at low pressure: Capacity for EV210B 1.5B at differential pressure of 10 mbar. Approx. 0.08 l / min
80Z901.01
300
Danfoss
p [m bar]
200
100
80
60
50
40
30
B
1.5
B
10B
10B
15B
20B
25B
3B
4.5
20
8B
EV2 B 6B
2B
EV2
10B
10B
10B
10B
10B
10B
10B
10B
10
EV2
EV2
EV2
EV2
EV2
EV2
EV2
EV2
10
8
6
5
4
3
1
0.8
0.6
0.5
0.4
0.3
0.2
0.1
0.01 0.02 0.03 0.04 0.06 0.1 0.2 0.3 0.4 0.6 1 2 3 4 6 10 20 30 40 60 100 200
0.05 0.08 0.5 0.8 5 8 50 80 [l/min]
Example, water at higher pressure: Capacity for EV210B 3B at differential pressure of 0.5 bar. Approx. 0.21 m3 / h
80Z902.10
Danfoss
p [bar]
B
1.5
10B
2B
8B
10B
10B
EV2
3B
EV2
EV2
10B
B
4.5
EV2
10B
EV2
10B
6B
10B
10B
25B
15B
EV2
20B
EV2
10B
10B
10B
EV2
EV2
EV2
[m3/h]
Example, air at lower pressure: Capacity for EV210B 15B at differential pressure of 17 mbar. Approx. 10 Nm3 / h
20
10B
1.5
EV2 B 4.5
25
10
15
3
8
2
EV2 6
10B
10B
EV2
10B
10B
10B
10B
10B
10B
10
EV2
EV2
EV2
EV2
EV2
EV2
EV2
[Nm3/ h
Example, air at higher pressure: Capacity for EV210B 2B at inlet pressure (p1) of 5 bar and outlet pressure (p2) of
3.25 bar. Approx. 9 Nm3 / h
EV210B 3
EV210B 2
p1 [bar]
80Z904.10
[Nm3 / h]
Danfoss
p2 [bar]
Time to open/close
Table 5: EV210B/BW Brass valve body, NC time to open/close
EV210B/BW EV210B/BW EV210B EV210B EV210B EV210B EV210B
Type
1.5 - 2 3-4.5 6 8 – 10 15 20 25
Time to open [ms](1) 10 20 20 20 30 40 40
Time to close [ms](1) 20 20 20 30 50 50 70
(1)
The times are indicative and apply to water. The exact times will depend on the pressure conditions.
(1)
The times are indicative and apply to water. The exact times will depend on the pressure conditions.
Materials
Table 7: Materials
Components Materials Specifications
Valve body Brass/Stainless steel W. no. 2.0402/W.no. 1.4404 / AISI 316L
Armature Stainless steel W.no. 1.4105 / AISI 430 FR
Armature tube Stainless steel W.no. 1.4306 / AISI 304 L
Armature stop Stainless steel W.no. 1.4105 / AISI 430 FR
Springs Stainless steel W.no. 1.4310 / AISI 301
Valve plate EPDM/FKM
O-ring EPDM/FKM
Figure 9: Dimension, brass body Figure 10: Dimension, stainless steel body
B1 B1
32U1779.10
32U1769.11
Danfoss
Danfoss
H
H
H1
H1
L
L B B
4.3 Mounting
Figure 11: Mounting angle
EV15-25 EV15-25
EV1.5-3 EV1.5-3
5 Ordering
5.2 Accessories
Coils
Table 10: Below coils can be used for EV210B
Coil Type Power consumption Enclosure Features
11 - 17 W AC
BE, clip on IP67 With terminal box
15 - 16 W DC
11 - 16 W AC
BG, clip on IP67 With terminal box
16 - 20 W DC
Cable plug
Figure 12: Cable plug
Timer
Universal electronic multi-timer, Type ET20M
Mounting bracket
For EV210B/BW 1.5 – 4.5B in connection with synthetic tubes, pipes and similar.
Danfoss offers a wide range of support along with our products, including digital product information, software,
mobile apps, and expert guidance. See the possibilities below.
Danfoss Learning
Danfoss Learning is a free online learning platform. It features courses and materials specifically
designed to help engineers, installers, service technicians, and wholesalers better understand the
products, applications, industry topics, and trends that will help you do your job better.
Spare Parts
Get access to the Danfoss spare parts and service kit catalog right from your smartphone. The app
contains a wide range of components for air conditioning and refrigeration applications, such as
valves, strainers, pressure switches, and sensors.