Professional Documents
Culture Documents
COMMUNICATION MODULES
CMC-99/141
MultiCon CMC I/O modules
Index
Input modules
universal universal counters
EFUN4 ................................... 6 CP2 ........................................ 17
EFUN6 ................................... 6 CP4 ........................................ 17
QFUN4 ................................... 7
QFUN6 ................................... 7 hourmeters
UN3 ....................................... 8
HM2 ....................................... 18
UN5 ....................................... 8
HM4 ....................................... 18
current
I16 ......................................... 9 analogue flowmeters
I24 ......................................... 9 FI2 .......................................... 19
IS6 ......................................... 9 FI4 .......................................... 19
voltage pulse flow or ratemeters
U16......................................... 10
FT2 ......................................... 20
U24 ........................................ 10
FT4 ......................................... 20
voltage-current
UI4 ......................................... 11
UI8 ......................................... 11 Output modules
UI12 ....................................... 11 current
IO2 ........................................... 21
voltage-current-resistance
IO4 ........................................... 21
UI4N8 ..................................... 12 IO6 ........................................... 21
UI8N8 ..................................... 12 IO8 ........................................... 21
voltage-current-digital SSR
UI4D8 ..................................... 13 S8 ............................................. 22
UI8D8 ..................................... 13 S16 ........................................... 22
S24 ........................................... 22
thermocouple
TC4 ......................................... 14 relay
TC8 ......................................... 14 R45 ........................................... 23
TC12 ....................................... 14 R65 ........................................... 23
R81 ........................................... 23
RTD R121 ......................................... 23
RT4 ........................................ 15
RT6 ........................................ 15
www.multicon24.eu 2
MultiCon CMC I/O modules
Controllers, data recorders, HMI
The MultiCon line includes advanced controllers and data recorders with great potential closed in small
casings. MultiCon has been specifically designed for advanced applications in industrial automatic control
engineering. It does not mean, however, that the device cannot be applied in smaller systems. MultiCon can
be equipped with three isolated RS-485 interfaces which make it a perfect solution for distributed systems
to work as CPU. Thanks to Ethernet interface the device can be monitored via the Internet. A wide range of
input and output modules allows to customize CMC precisely as the customer requires it. Thanks to a colour
touchscreen working with the user interface becomes a pleasure, while MultiCon operation playing the role
of HMI is intuitive and comfortable. Our devices are LINUX-based products to ensure stable operation.
The biggest advantage of all devices from the MultiCon line is a big number of built-in inputs / outputs accessible in
one compact device. The most developed version CMC-99 has up to 48 measurement or digital inputs and 60 virtual
channels whereas CMC-141 has 50% more inputs / outputs and virtual channels.
Thanks to a well-thought-out module design you can choose among a wide range of modules and connect them to
slots in the way you wish but you do not have to use all slots. You can also decide on your own how to use virtual
channels, if they are going to be used for direct measurement readings, mathematical functions, timers, profile
creation, set points or virtual objects.
What if one day you want to change your configuration, add new modules or change their slots? That's not a problem!
All you have to do is to send your device to an authorized distributor who will perform the changes you require.
TECHNICAL DATA
CMC-99 CMC-141
Power supply/consumption 19-50V DC, 16-35V AC or 85-260V AC/DC, typ. 15 VA, max. 20 VA 19-50V DC, 16-35V AC or 85-260V AC/DC, typ. 25 VA, max. 35 VA
Display 3.5” graphic TFT, 16-bit colour, 320 x 240 pxs, touchscreen navigation 5.7” graphic TFT, 16-bit colour, 320 x 240 pxs, touchscreen navigation
Measurement inputs • up to 12 universal, isolated or unisolated: 0/4 ÷ 20 mA; 0/1 ÷ 5V, 0/2 • up to 18 universal, isolated or unisolated: 0/4 ÷ 20 mA; 0/1 ÷ 5V, 0/2
÷ 10V, 0 ÷ 30V; thermocouples: J, K, S, T, N, R, B, E (PN-EN), L (GOST); ÷ 10V, 0 ÷ 30V; thermocouples: J, K, S, T, N, R, B, E (PN-EN), L (GOST);
-10 ÷ 25 mV, -10 ÷ 100 mV, 0 ÷ 600 mV; RTD (2/3/4 wire): Pt100, -10 ÷ 25 mV, -10 ÷ 100 mV, 0 ÷ 600 mV; RTD (2/3/4 wire): Pt100,
Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100, Ni500, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100, Ni500,
Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50, Cu'100 (PN- Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50, Cu'100 (PN-
83M-53852); resistance 0 ÷ 300 Ω, resistance 0 ÷ 3 kΩ 83M-53852); resistance 0 ÷ 300 Ω, resistance 0 ÷ 3 kΩ
• up to 48 analogue: 0/4 ÷ 20 mA, 0/1 ÷ 5V, 0/2 ÷ 10V • up to 72 analogue: 0/4 ÷ 20 mA, 0/1 ÷ 5V, 0/2 ÷ 10V
• up to 24 thermocouples: J, K, S, T, N, R, B, E (PN-EN); L (GOST); ± 25 • up to 36 thermocouples: J, K, S, T, N, R, B, E (PN-EN); L (GOST); ± 25
mV, ± 100 mV, -10 ÷ 25 mV, -10 ÷ 100 mV mV, ± 100 mV, -10 ÷ 25 mV, -10 ÷ 100 mV
• up to 12 RTD: Pt100, Pt500, Pt1000 (PN-EN); Pt'50, Pt'100, Pt'500 • up to 18 RTD: Pt100, Pt500, Pt1000 (PN-EN); Pt'50, Pt'100, Pt'500
(GOST); Ni100, Ni500, Ni1000 (PN-EN); Cu50, Cu100 (PN-83M- (GOST); Ni100, Ni500, Ni1000 (PN-EN); Cu50, Cu100 (PN-83M-
53852); Cu'50, Cu'100 (PN-83M-53852); 0 ÷ 300 Ω, 0 ÷ 3 kΩ 53852); Cu'50, Cu'100 (PN-83M-53852); 0 ÷ 300 Ω, 0 ÷ 3 kΩ
• up to 24 NTC: 0 ÷ 110 kΩ • up to 24 NTC: 0 ÷ 110 kΩ
• up to 12 counters: max. freq. 5 kHz • up to 12 counters: max. freq. 5 kHz
• up to 12 digital flowmeter / ratemeter: max. freq. 50 kHz • up to 12 digital flowmeter / ratemeter: max. freq. 50 kHz
• up to 12 analogue flowmeter: 0/4 ÷ 20 mA • up to 18 analogue flowmeter: 0/4 ÷ 20 mA
• mixed inputs: analogue-NTC temperature or analogue-digital: up to • mixed inputs: analogue-NTC temperature or analogue-digital: up to
12 x 0 ÷ 20 mA, 4 ÷ 20 mA and up to 12 x 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 24 x 0 ÷ 20 mA, 4 ÷ 20 mA and up to 24 x 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V,
2 ÷ 10V and up to 24 x NTC or digital 2 ÷ 10V and up to 24 x NTC or digital
Digital inputs • up to 49 * • up to 73 *
Outputs • up to 8 analogue 4 ÷ 20 mA, passive, isolated, resolution 12 bit • up to 24 analogue 4 ÷ 20 mA, passive, isolated, resolution 12 bit
• up to 16 SPST relay 1A/250V • up to 36 SPST relay 1A/250V
• up to 4 SPDT relay 5A/250V • up to 18 SPDT relay 5A/250V
• up to 48 SSR • up to 72 SSR
Sensor supply output • 1 x 24V DC ±5%, 200 mA max. • 1 x 24V DC ±5%, 200 mA max.
Communication Basic version: RS-485, 1 x USB Host, Basic version: RS-485, 1 x USB Host,
interface ETU: 1 or 2 x USB Host, 1 x Ethernet ETU: 1 or 2 x USB Host, 1 x Ethernet
ACM: 2 x RS-485, 1 x RS-485/232, 1 or 2 x USB Host, 1 x Ethernet ACM: 2 x RS-485, 1 x RS-485/232, 1 or 2 x USB Host, 1 x Ethernet
Protocols Modbus RTU Master/Slave, Modbus TCP Server, HTTP, Web Server, NTP Modbus RTU Master/Slave, Modbus TCP Server, HTTP, Web Server, NTP
IP rate protection IP 65 (device front side), options: IP 65 version including gasket for IP 65 (device front side), optional IP 65 version including gasket for
panel cut-out sealing or IP 54 transparent door with key; panel cut-out sealing or IP 54 transparent door with key;
IP 40 (front USB version) IP 40 (front USB version)
Operating temp. 0°C ÷ +50°C (optional -20°C ÷ +50°C) 0°C ÷ +50°C (optional -20°C ÷ +50°C)
Storage temp. -10°C ÷ +70°C (optional -20°C ÷ +70°C) -10°C ÷ +70°C (optional -20°C ÷ +70°C)
Data memory internal 2 GB (option 4 GB) internal 2 GB (option 4 GB)
Data recording speed from 0.1 s to 24 h with resolution 0.1 s from 0.1 s to 24 h with resolution 0.1 s
Dimensions case (WxHxD): 96 x 96 x 100 mm; panel cut-out: 90.5 x 90.5 mm case (WxHxD): 144 x 144 x 100 mm; panel cut-out: 137 x 137 mm
* one digital input is available in standard, integrated on PS32 or PS42 power supply.
3
MultiCon CMC I/O modules
MultiCon CMC-XX-P/D/C/B/A-XXX
options:
memory: 01: no options
version:
0: 2 GB 0C: PCB conformal coating
99 : 96 x 96 mm case
1: 4 GB 11: IP 65 gasket
141 : 144 x 144 mm case
1C: IP 65 gasket + PCB conformal coating
slot A - I/O module 81: operating temp. -20°C ÷ +50°C + PCB conformal coating
slot P - power supply module slot B - I/O module B1: front USB Host (IP 40)
BC: front USB Host (IP 40) + PCB conformal coating
slot D - communication module slot C - I/O module P1: IP 65 gasket + operating temp. -20°C ÷ +50°C
available modules listed below + PCB conformal coating
K1: front USB Host (IP 40) + operating temp. -20°C ÷ +50°C
Optional: LKS-99/141 Data logging licence key + PCB conformal coating
ENS-99/141 „E-mail notifications” licence key
PS32 PS42
1 1
Power supply
2 19V ÷ 50V DC 2 Power supply
16V ÷ 35V AC 85V÷260V AC/DC
Pin description:
PE PE
1, 2 : power supply connectors - supply voltage depends
on version, but polarization is irrelevant,
SERVICE
SERVICE 3 : ground for voltage output,
4 : +24V DC output, used to power external sensors,
3 GND 3 GND 5 : digital input - used to measure digital signals,
+24V DC ±5% +24V DC ±5%
4 Imax. = 200mA 4 Imax. = 200mA 6 : ground for connectors 5, 7, 8,
digital input digital input
5
0/15..24V DC
5
0/15..24V DC
7, 8 : data inputs for RS-485
6 GND 6 GND
7 B- 7 B-
RS-485 RS-485
8 A+ isolated 8 A+ isolated
TECHNICAL DATA
PS32 PS42
Number of inputs/outputs 5 5
Sensor supply output 24V DC ±5% / max. 200 mA 24V DC ±5% / max. 200 mA
Digital input 0...15...24V DC with galvanic isolation 0...15...24V DC with galvanic isolation
(low state: 0 ÷ 1V, high state: 8 ÷ 24V) (low state: 0 ÷ 1V, high state: 8 ÷ 24V)
power consumption: 7,5 mA / 24V power consumption: 7,5 mA / 24V
isolation strenght: 1 min @ 500V DC isolation strenght: 1 min @ 500V DC
Interface RS-485, Modbus RTU, 1200 ÷ 115200 bit/sec. RS-485, Modbus RTU, 1200 ÷ 115200 bit/sec.
Weight 81 g 91 g
www.multicon24.eu 5
MultiCon CMC I/O modules
Input modules - universal with totalizer
EFUN4 n02
V, mA
-
n02
V, mA
-
TC, mV TC, mV
IN1
IN1
n03 +
RTD
n03 +
RTD
EFUN modules parameters are: n04 n04
+ +
- Name - read-only input name given by the device, n05 n05
- -
- Unit - read-only field („°C”, „mA”, „V”, „Ohm” or „mV”), depending on Mode n06 n06
IN2
IN2
n07 + n07 +
parameter settings, n08
RTD
n08
RTD
IN_T
IN_T
- Low limit - defines measurement level below which in logical channel „Lo”
state will be displayed, n09 V, mA
+
n09 V, mA
+
- -
- High limit - defines measurement level above which in logical channel „Hi” n10 n10
TC, mV TC, mV
IN3
IN3
n11 + n11 +
state will be displayed, n12
RTD
n12
RTD
IN4
IN4
compensation mode (allows to choose parameter which will be used in n15 +
RTD
n15 +
RTD
compensation process), disable (compensation is not active), manual (allows n16 n16
+
n17
to compensate sensor constant offset), Pin description: n18
V, mA
-
IN5
IN_T : Cold Junction n19 +
RTD
near the sensor, which is measured by more reliable thermometer. temperature n20
+
sensor n21
-
n22
IN6
n23 +
RTD
n24
TECHNICAL DATA
EFUN4 EFUN6
Number of inputs 4 (unisolated) 6 (unisolated)
Measurement ranges
current inputs: 0 ÷ 20 mA, 4 ÷ 20 mA 0 ÷ 20 mA, 4 ÷ 20 mA
voltage inputs: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V, 0 ÷ 30V, -10 ÷ 25mV, -10 ÷ 100mV, 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V, 0 ÷ 30V, -10 ÷ 25mV, -10 ÷ 100mV,
0 ÷ 600mV 0 ÷ 600mV
digital inputs: TTL (Lo: 0 ÷ 0.8V; Hi: 2 ÷ 5.5V), HTL (Lo: 0 ÷ 4.2V; Hi: 11.5 ÷ 30V) TTL (Lo: 0 ÷ 0.8V; Hi: 2 ÷ 5.5V), HTL (Lo: 0 ÷ 4.2V; Hi: 11.5 ÷ 30V)
thermocouple inputs: J, K, S, T, N, R, B, E (PN-EN), L (GOST) J, K, S, T, N, R, B, E (PN-EN), L (GOST)
RTD inputs: (2, 3, 4-wire) Pt100, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100, Pt100, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100,
Ni500, Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50, Cu'100 Ni500, Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50, Cu'100
(PN-83M-53852) (PN-83M-53852)
resistance input: 0-300 Ω, 0-3 kΩ 0-300 Ω, 0-3 kΩ
Sampling period current, voltage, thermocouple inputs: 450 ms current, voltage, thermocouple inputs: 450 ms
RTD, resistance inputs: 1020 ms RTD, resistance inputs: 1020 ms
Precision 0,15% @ 25˚C (for -10 ÷ 25 mV); 0,1% @ 25˚C (others ranges) 0,15% @ 25˚C (for -10 ÷ 25 mV); 0,1% @ 25˚C (others ranges)
Input impedance current inputs: <65 Ω (30 Ω typ.) current inputs: <65 Ω (30 Ω typ.)
voltage inputs: >100 kΩ (while maintaining correct polarization) voltage inputs: >100 kΩ (while maintaining correct polarization)
TC inputs: ≥6 MΩ, RTD inputs: 4 kΩ TC inputs: ≥6 MΩ, RTD inputs: 4 kΩ
Weight 40 g 45 g
Part number M99-EFUN4-001 M141-EFUN6-001
6
MultiCon CMC I/O modules
Input modules - universal with totalizer
QFUN4 n02
V, mA
-
n02
V, mA
-
TC, mV TC, mV
IN1
IN1
n03 +
RTD
n03 +
RTD
QFUN modules parameters are: n04 n04
+ +
- Name - read-only input name given by the device, n05 n05
- -
n06 n06
- Unit - read-only field („°C”, „mA”, „V”, „Ohm” or „mV”), depending on Mode
IN2
IN2
n07 + n07 +
- Mode - allows to set operation mode, eg. select a type of thermocouple or n09 +
n09 +
V, mA V, mA
mV measurement range or other, n10
TC, mV
-
n10
TC, mV
-
IN3
IN3
- Low limit - defines measurement level below which in logical channel „Lo” n11 +
RTD
n11 +
RTD
n12 n12
state will be displayed,
- High limit - defines measurement level above which in logical channel „Hi”
IN_T
IN_T
state will be displayed,
- Wire compensation - menu which allows to compensate measurement n13 +
n13 +
- -
errors, which can be caused by wrong sensor readings, options: n14 n14
IN4
IN4
compensation mode (allows to choose parameter which will be used in n15 +
RTD
n15 +
RTD
n16 n16
compensation process), disable (compensation is not active), manual (allows +
n17
to compensate sensor constant offset), Pin description: n18
V, mA
-
- Actual temperature - parameter in which user enters actual temperature IN_T : Cold Junction TC, mV
IN5
n19 +
RTD
near the sensor, which is measured by more reliable thermometer. temperature n20
sensor n21 +
-
n22
IN6
n23 +
RTD
n24
TECHNICAL DATA
QFUN4 QFUN6
Number of inputs 4 (isolated) 6 (isolated)
Measurement ranges
current inputs: 0 ÷ 20 mA, 4 ÷ 20 mA 0 ÷ 20 mA, 4 ÷ 20 mA
voltage inputs: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V, 0 ÷ 30V, -10 ÷ 25mV, -10 ÷ 100mV, 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V, 0 ÷ 30V, -10 ÷ 25mV, -10 ÷ 100mV,
0 ÷ 600mV 0 ÷ 600mV
digital inputs: TTL (Lo: 0 ÷ 0.8V; Hi: 2 ÷ 5.5V), HTL (Lo: 0 ÷ 4.2V; Hi: 11.5 ÷ 30V) TTL (Lo: 0 ÷ 0.8V; Hi: 2 ÷ 5.5V), HTL (Lo: 0 ÷ 4.2V; Hi: 11.5 ÷ 30V)
thermocouple inputs: J, K, S, T, N, R, B, E (PN-EN), L (GOST) J, K, S, T, N, R, B, E (PN-EN), L (GOST)
RTD inputs: (2, 3, 4-wire) Pt100, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100, Pt100, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100,
Ni500, Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50, Cu'100 Ni500, Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50, Cu'100
(PN-83M-53852) (PN-83M-53852)
resistance input: 0-300 Ω, 0-3 kΩ 0-300 Ω, 0-3 kΩ
Sampling period current, voltage, thermocouple inputs: 450 ms current, voltage, thermocouple inputs: 450 ms
RTD, resistance inputs: 920 ms RTD, resistance inputs: 920 ms
Precision 0,15% @ 25˚C (for -10 ÷ 25 mV); 0,1% @ 25˚C (others ranges) 0,15% @ 25˚C (for -10 ÷ 25 mV); 0,1% @ 25˚C (others ranges)
Input impedance current inputs: <65 Ω (30 Ω typ.) current inputs: <65 Ω (30 Ω typ.)
voltage inputs: >100 kΩ (while maintaining correct polarization) voltage inputs: >100 kΩ (while maintaining correct polarization)
TC inputs: ≥6 MΩ, RTD inputs: 4 kΩ TC inputs: ≥6 MΩ, RTD inputs: 4 kΩ
Weight 64 g 82 g
Part number M99-EFUN4-001 M141-EFUN6-001
6
MultiCon CMC I/O modules
Input modules - universal
- -
n02 n02
TC, mV TC, mV
IN1
IN1
n03 + n03 +
RTD RTD
UN modules parameters are: n04 n04
- Name - read-only input name given by the device, n05 n05
n06 +
n06 +
- Unit - read-only field („°C”, „mA”, „V”, „Ohm” or „mV”), depending on Mode - -
n07 n07
parameter settings, n08
TC, mV
n08
TC, mV
IN2
IN2
+ +
- Mode - allows to set operation mode, eg. select a type of thermocouple or n09
RTD
n09
RTD
IN_T
IN_T
state will be displayed,
- High limit - defines measurement level above which in logical channel „Hi”
+ +
state will be displayed, n11 n11
- -
n12 n12
- Wire compensation - menu which allows to compensate measurement TC, mV TC, mV
n13 n13
IN3
IN3
+ +
compensation mode (allows to choose parameter which will be used in n15 n15
compensation process), disable (compensation is not active), manual (allows n16 +
-
to compensate sensor constant offset), n17 TC, mV
n18
IN4
+
- Actual temperature - parameter in which user enters actual temperature RTD
n19
near the sensor, which is measured by more reliable thermometer. Pin description:
n20
IN_T : Cold Junction n21 +
temperature n22 -
sensor n23
TC, mV
IN5
+
RTD
n24
TECHNICAL DATA n25
UN3 UN5
Measurement ranges
current inputs: 0 ÷ 20 mA, 4 ÷ 20 mA 0 ÷ 20 mA, 4 ÷ 20 mA
voltage inputs: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V, -10 ÷ 25mV, -10 ÷ 100mV, 0 ÷ 600mV 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V, -10 ÷ 25mV, -10 ÷ 100mV, 0 ÷ 600mV
thermocouple inputs: J, K, S, T, N, R, B, E (PN-EN), L (GOST) J, K, S, T, N, R, B, E (PN-EN), L (GOST)
RTD inputs: (2, 3, 4-wire) Pt100, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100, Pt100, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100,
Ni500, Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50, Cu'100 Ni500, Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50, Cu'100
(PN-83M-53852) (PN-83M-53852)
resistance input: 0-300 Ω, 0-3 kΩ 0-300 Ω, 0-3 kΩ
Sampling period current, voltage, thermocouple inputs: 535 ms current, voltage, thermocouple inputs: 535 ms
RTD, resistance inputs: 1410 ms RTD, resistance inputs: 1410 ms
Precision 0,15% @ 25˚C (for -10 ÷ 25 mV); 0,1% @ 25˚C (others ranges) 0,15% @ 25˚C (for -10 ÷ 25 mV); 0,1% @ 25˚C (others ranges)
Input impedance current inputs: <65 Ω (30 Ω typ.) current inputs: <65 Ω (30 Ω typ.)
voltage inputs: >100 kΩ (while maintaining correct polarization) voltage inputs: >100 kΩ (while maintaining correct polarization)
TC inputs: >1,5 MΩ TC inputs: >1,5 MΩ
Weight 74 g 77 g
www.multicon24.eu 7
MultiCon CMC I/O modules
Input modules - current
4 x 0-20mA
4 x 0-20mA
IN2 IN2 n01
n02 n02 IN 1
n03 IN3 n03 IN3 n02
All GND terminals in the I16 and I24 modules are common
n04 IN4 n04 IN4
but separated from power supply and other modules.
n05 GND n05 GND
4 x 0-20mA
4 x 0-20mA
Current inputs parameters are: IN6 IN6 n03
n07 n07 IN 2
- Name - read-only input name given by the device, IN7 IN7 n04
n08 n08
- Unit - read-only field which displays measurement n09 IN8 n09 IN8
unit „mA”, n10 GND n10 GND
- Mode - defines measurement range (0-20 or 4-20), n11 IN9 4 x 0-20mA n11 IN9
4 x 0-20mA
- Low limit - defines measurement low limit, below n12 IN10 n12 IN10 n05
IN 3
which the device returns „Lo” value, n13 IN11 n13 IN11 n06
- High limit - defines measurement high limit, above n14 IN12 n14 IN12
which the device returns „Hi” value. n15 GND n15 GND
4 x 0-20mA
IS6
6 isolated current inputs n17 IN14 n17 IN14 n07
n01 IN 4
n02
IN 1
n18 IN15 n18 IN15 n08
Examplary connection for 2 - wire
n03
1 n04
IN 2
n20 GND n20 GND
n21 IN17
4 x 0-20mA
Resolution 1 µA 1 µA 1 µA
Internal impedance type 100 Ω type 100 Ω type 1750 Ω @ 4 mA; type 400 Ω @ 20 mA
Protection 50 mA, auto-reset fuse 50 mA, auto-reset fuse 50 mA, auto-reset fuse
Weight 42,5 g 63 g 39 g
www.multicon24.eu 8
MultiCon CMC I/O modules
Input modules - voltage
4 x 0-10V
4 x 0-10V
IN2 IN2
n02 n02
n03 IN3 IN3
n03
n04 IN4 n04 IN4
4 x 0-10V
4 x 0-10V
n07 IN6 n07 IN6
- Unit - read-only field which displays measurement unit „V”, IN7 IN7
n08 n08
- Mode - defines measurement range (0 - 5V, 1 - 5V, 0 - 10V, 2 - 10V), IN8 IN8
n09 n09
- Low limit - defines measurement level below which in logical channel „Lo” n10 GND n10 GND
state will be displayed, IN9 IN9
n11 n11
- High limit - defines measurement level above which in logical channel „Hi”
4 x 0-10V
4 x 0-10V
n12 IN10 n12 IN10
state will be displayed. n13 IN11 n13 IN11
4 x 0-10V
4 x 0-10V
16 voltage inputs IN14 IN14
n01 IN1 n17 n17
4 x 0-10V
n02 IN2
n18 IN15 n18 IN15
n03 IN3
n07 IN6
n21 IN17
n08 IN7
2 Power supply
4 x 0-10V
(depending on version) Iin1 Iin2 n09 IN8
n22 IN18
n10 GND
n12 IN10
SERVICE + - + -
IN11 n24 IN20
n13
IN12
3 GND
n14
GND
n25 GND
+24V DC ±5% (Imax. = 200mA) n15
4 IN21
5 digital input
n16 IN13
n26
4 x 0-10V
n17 IN14
4 x 0-10V
0/15..24V DC
6 GND
n18 IN15 n27 IN22
7 B- n19 IN16
RS-485 n28 IN23
8 A+ insulated n20 GND
n29 IN24
n30 GND
TECHNICAL DATA
U16 U24
Number of inputs 16 24
Measurement range 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V
Hardware limitation 0V ÷ 12V 0V ÷ 12V
Hardware resolution 1 mV 1 mV
Internal impedance 50 kΩ 50 kΩ
Sampling period 10 ms (CMC reads modules every 100 ms) 10 ms (CMC reads modules every 100 ms)
Weight 42 g 62,5 g
www.multicon24.eu 9
MultiCon CMC I/O modules
Input modules - voltage/current
UI8
MODULE PIN ASSIGNMENT
UI4 UI8 UI12
4 voltage 8 voltage 12 voltage
+ 4 current inputs + 8 current inputs + 12 current inputs
n01 IN1 n01 IN1 n01 IN1
4 x 0-20mA
4 x 0-20mA
4 x 0-20mA
n02 IN2 n02 IN2 n02 IN2
4 x 0-20mA
4 x 0-20mA
- Unit - read-only field which displays unit of measurement,
4 x 0-10V
n07 IN6 n07 IN6 n07 IN6
- Mode - defines measurement range, IN7 IN7 IN7
n08 n08 n08
- Low limit - defines measurement level below which in logical n09 IN8 n09 IN8 n09 IN8
channel „Lo” state will be displayed, n10 GND n10 GND n10 GND
- High limit - defines measurement level above which in logical n11 IN9 n11 IN9
4 x 0-20mA
4 x 0-10V
channel „Hi” state will be displayed. n12 IN10 n12 IN10
4 x 0-10V
4 x 0-10V
n01 IN1 n01 IN1 n17 IN14 n17 IN14
4 x 0-20mA
4 x 0-20mA
n06 IN5
n06 IN5 n20 GND n20 GND
4 x 0-10V
4 x 0-10V
2 Power supply
(depending on version) Iin1
n07 IN6
2 Power supply n07 IN6
n21 IN17
Iin2 IN7 (depending on version) Uin1 Uin2 IN7
n08 n08
4 x 0-10V
IN8 IN8 n22 IN18
n09 n09
Sensor 1 Sensor 2 GND Sensor 1 Sensor 2 GND
n10 n10 IN19
SERVICE + - + - SERVICE +
+
- +
+
-
n23
n24 IN20
GND GND
3 3 GND
4 +24V DC ±5% (Imax. = 200mA)
4 +24V DC ±5% (Imax. = 200mA) n25
5 digital input 5 digital input
n26 IN21
0/15..24V DC 0/15..24V DC
6 6
4 x 0-10V
GND GND
n27 IN22
7 B- 7 B-
RS-485 RS-485
8 A+ insulated 8 A+ insulated n28 IN23
n29 IN24
Measurement range voltage: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V; voltage: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V; voltage: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V;
current: 0 ÷ 20 mA, 4 ÷ 20 mA current: 0 ÷ 20 mA, 4 ÷ 20 mA current: 0 ÷ 20 mA, 4 ÷ 20 mA
Hardware limitation voltage: 0V ÷ 12V; current: 0 mA ÷ 24 mA voltage: 0V ÷ 12V; current: 0 mA ÷ 24 mA voltage: 0V ÷ 12V; current: 0 mA ÷ 24 mA
Hardware resolution voltage: 1 mV; current: 1 µA voltage: 1 mV; current: 1 µA voltage: 1 mV; current: 1 µA
Internal impedance voltage: 50 kΩ; current: type 100 Ω voltage: 50 kΩ; current: type 100 Ω voltage: 50 kΩ; current: type 100 Ω
Sampling period 10 ms, CMC reads modules every 100 ms 10 ms, CMC reads modules every 100 ms 10 ms, CMC reads modules every 100 ms
Weight 32 g 43 g 62 g
UI4N8 UI8N8
4 voltage + 4 current 8 voltage + 8 current
Voltage / current / NTC (temperature or resistance measurement) + 8 NTC inputs + 8 NTC inputs
inputs parameters are:
- Name - read-only input name given by the device („mA”, „V”, „°C” n01 IN1
4 x 0 - 100kΩ
n01 IN1
4 x 0 - 100kΩ
or „Ω”), n02 IN2 n02 IN2
- Unit - read-only field which displays unit of measurement, n03 IN3 n03 IN3
- Low limit - defines measurement level below which in logical n05 GND n05 GND
4 x 0 - 100kΩ
n06 IN5
4 x 0 - 100kΩ
- High limit - defines measurement level above which in logical n07 IN6 n07 IN6
4 x 0-20mA
4 x 0-20mA
4 x 0-20mA
recommended to use shielded
4 x 0-10V
n21 IN17
n22 IN18 4 x 0-10V
UI4N8 UI8N8 n23 IN19
Number of inputs 4 x voltage + 4 x current + 8 x resistance NTC 8 x voltage + 8 x current + 8 x resistance NTC n24 IN20
n25 GND
Measurement range voltage inputs: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V voltage inputs: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V n26 IN21
current inputs: 0 ÷ 20 mA, 4 ÷ 20 mA current inputs: 0 ÷ 20 mA, 4 ÷ 20 mA
4 x 0-10V
n27 IN22
resistance inputs: 0 ÷ 100 kΩ resistance inputs: 0 ÷ 100 kΩ
Hardware limitation voltage: 0 ÷ 12V; current: 0 ÷ 24mA; resistance: 0 ÷ 110kΩ voltage: 0 ÷ 12V; current: 0 ÷ 24mA; resistance: 0 ÷ 110kΩ n28 IN23
n29 IN24
Hardware resolution voltage: 1 mV; current: 1 µA; resistance: 4 Ω voltage: 1 mV; current: 1 µA; resistance: 4 Ω n30 GND
Internal impedance voltage: 61 kΩ; current: 100 Ω; resistance: 121 kΩ voltage: 61 kΩ; current: 100 Ω; resistance: 121 kΩ
Weight 43 g 62 g
www.multicon24.eu 11
MultiCon CMC I/O modules
Input modules - voltage/current/digital
UI4D8 UI8D8
4 voltage + 4 current 8 voltage + 8 current
Voltage / current inputs parameters are: + 8 digital inputs + 8 digital inputs
- Name - read-only input name given by the device,
- Unit - read-only field which displays unit of measurement („mA”, „V”), n01 IN1 n01 IN1
4 x 0-20mA
4 x 0-20mA
- Mode - defines measurement range, n02 IN2 n02 IN2
- Low limit - defines measurement level below which in logical channel n03 IN3 n03 IN3
4 x 0-20mA
4 x 0-10V
n07 IN6 n07 IN6
4 x 0-10V
n12 IN10 n12 IN10
state change, if this change wants to be noticed. Each input has the n13 IN11
IN17
n13 IN11
possibility to sets its own Filter time, even if this input is part of n14 IN12 n14 IN12
another, different set of this parameter do not disturbs their work. n15 COM 9-12 n15 GND
4 x 0-10V
n17 IN14 n17 IN14
IN18
n18 IN15 n18 IN15
Number of inputs 4 x voltage + 4 x current + 8 x digital 8 x voltage + 8 x current + 8 x digital n24 IN20
n25 COM 17-20
Measurement range voltage inputs: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V voltage inputs: 0 ÷ 5V, 1 ÷ 5V, 0 ÷ 10V, 2 ÷ 10V
n26 IN21
current inputs: 0 ÷ 20 mA, 4 ÷ 20 mA current inputs: 0 ÷ 20 mA, 4 ÷ 20 mA
n27 IN22
IN26
digital inputs: TTL: Lo: 0 ÷ 0,8V, Hi: 2 ÷ 5,5V digital inputs: TTL: Lo: 0 ÷ 0,8V, Hi: 2 ÷ 5,5V
HTL: Lo: 0 ÷ 4,2V, Hi: 11,5 ÷ 30V HTL: Lo: 0 ÷ 4,2V, Hi: 11,5 ÷ 30V n28 IN23
Hardware limitation voltage: 0 ÷ 12V; current: 0 ÷ 24mA; digital: 0 ÷ 32V voltage: 0 ÷ 12V; current: 0 ÷ 24mA; digital: 0 ÷ 32V n29 IN24
n30 COM 21-24
Hardware resolution voltage: 1 mV; current: 1 µA voltage: 1 mV; current: 1 µA
Precision 0,1% @ 25°C (voltage/current), 2% @ 25°C (digital) 0,1% @ 25°C (voltage/current), 2% @ 25°C (digital)
Internal impedance voltage: 61 kΩ; current: 100 Ω; digital: 80 kΩ voltage: 61 kΩ; current: 100 Ω; digital: 80 kΩ
Weight 43 g 62 g
www.multicon24.eu 12
MultiCon CMC I/O modules
Input modules - thermocouple
- Unit - read-only field which displays „°C” or „mV”, depending on Mode n05 - n05 - n05 -
IN3 IN3 IN3
n06 + n06 + n06 +
parameter settings, - - -
n07 n07 n07
- Mode - allows to set type of thermocouple or mV measurement range, IN4 IN4 IN4
n08 + n08 + n08 +
- Low limit - defines measurement level below which in logical channel -
n09 IN5
„Lo” state will be displayed,
IN_T
IN_T
+
n10
- High limit - defines measurement level above which in logical channel n11
-
- IN6
„Hi” state will be displayed, n09 n12 +
IN5
- Wire compensation - allows to compensate measurement errors, n10 +
-
IN_T
which can be caused by wrong sensor readings, n11 IN6
- Compensation - parameter which allows to manually compensate n12 +
sensor error, written here value is added or subtracted from measured n13 - n13 -
IN7 IN7
sensor value, n14 + n14 +
n15
- n15
-
- Actual temperature - parameter in which user enters actual IN8 IN8
n16 + n16 +
temperature near the sensor, which is measured by a more reliable
thermometer, n17 -
IN9
n18 +
- Compensate - button which activates the compensation, -
Pin description: n19 IN10
- Compensation - read only parameter; displays voltage value calculated
IN_T : Cold Junction n20 +
to compensate temperature measurement. temperature sensor n21 -
IN11
n22 +
n23
-
TECHNICAL DATA n24 +
IN12
Number of inputs 4 8 12
Hardware resolution 1 µV (± 30 mV), 4 µV (± 120 mV) 1 µV (± 30 mV), 4 µV (± 120 mV) 1 µV (± 30 mV), 4 µV (± 120 mV)
Permissible voltage difference 0.5 V between channels 0.5 V between channels 0.5 V between channels
Weight 32 g 42 g 52 g
www.multicon24.eu 13
MultiCon CMC I/O modules
Input modules - RTD
The range of RTD modules consist of 4 and 6 RTD input modules. These
inputs are used for temperature measurement using RTD type temperature
sensors (by 2-, 3- and 4-wire method), or for resistance measurement in the
ranges up to 3kΩ. The RT modules cooperate with many kinds of resistance
thermometers and thanks to this, there is no need to change the module
when another temperature sensor has been used, the user only needs to
change the settings in the MultiCon unit.
IN1
IN1
RT4 and RT6 modules parameters are: n03 n03
- Name - read-only input name given by the device, n04 n04
- Unit - read-only field which displays „°C” when Mode parameter is set on temperature n05 n05
n06 n06
IN2
IN2
measurement, or displays „Ω” when Mode parameter is set on resistance measurement,
n07 n07
- Mode - defines which sensor is used for measurement, or what is the resistance
n08 n08
measurement range and what is the method of these measurements,
n09 n09
- Low limit - defines measurement level below which in logical channel „Lo” state will be
n10 n10
IN3
IN3
displayed, n11
n11
- High limit - defines measurement level above which in logical channel „Hi” state will be n12 n12
displayed. n13 n13
n14 n14
IN4
IN4
Schematic diagram for the RT4 module and MB1 Modbus port n15 n15
n16 n16
Pt100 Slot B
RT4
sensor 4 RTD inputs
n01
n17
n02
n18
IN1
1 Inp.B1 : RTD
IN5
n03
Control system n04
2 Power supply
(depending on version)
n05
n06
RTD 2-wire RTD 3-wire RTD 4-wire n19
IN2
Slave device
n08
configuration configuration configuration n20
Heater SERVICE
n09
n10
IN3
Inp.B3 : RTD
Slave address: 1
Register: 1h
3 GND
n11
n12
n01 n01 n01 n21
4 +24V DC ±5% (Imax. = 200mA)
IN6
0/15..24V DC n14
0÷5A
IN4
6 Inp.B4 : RTD
IN1
IN1
Current 7
GND
B-
n15
RT4 RT6
Number of inputs 4 6
Measurement range Pt100, Pt500, Pt1000 (PN-EN); Pt'50, Pt'100, Pt'500 (GOST) Pt100, Pt500, Pt1000 (PN-EN); Pt'50, Pt'100, Pt'500 (GOST)
Ni100, Ni500, Ni1000 (PN-EN) Ni100, Ni500, Ni1000 (PN-EN)
Cu50, Cu100, Cu'50, Cu'100 (PN-83M-53852) Cu50, Cu100, Cu'50, Cu'100 (PN-83M-53852)
resistance: 0 ÷ 300 Ω, 0-3 kΩ resistance: 0 ÷ 300 Ω, 0-3 kΩ
Temperature range -100 ÷ 600°C (Pt100, Pt500, Pt1000) -100 ÷ 600°C (Pt100, Pt500, Pt1000)
-200 ÷ 600°C (Pt'50, Pt'100, Pt'500) -200 ÷ 600°C (Pt'50, Pt'100, Pt'500)
-50 ÷ 200°C (Cu50, Cu100); -200 ÷ 200°C (Cu'50, Cu'100) -50 ÷ 200°C (Cu50, Cu100); -200 ÷ 200°C (Cu'50, Cu'100)
-60 ÷ 180°C (Ni100, Ni500, Ni1000) -60 ÷ 180°C (Ni100, Ni500, Ni1000)
Connection method 2, 3 and 4 wire (switched manually) 2, 3 and 4 wire (switched manually)
Weight 42 g 57 g
www.multicon24.eu 14
MultiCon CMC I/O modules
Input modules - digital
D16
MODULE PIN ASSIGNMENT
D8 D16 D24
8 digital inputs 16 digital inputs 24 digital inputs
n01 IN1 n01 IN1 n01 IN1
n02 IN2 n02 IN2 n02 IN2
IN9 IN17 IN25
D modules parameters are: n03 IN3 n03 IN3 n03 IN3
- Name - read-only input name given by n04 IN4 n04 IN4 n04 IN4
n05 COM 1-4 IN11 n05 COM 1-4 n05 COM 1-4
the device, n06 IN5 n06 IN5 n06 IN5
- Filter time - defines minimal time that has n07 IN6 n07 IN6 n07 IN6
IN10 IN18 IN26
to elapse from last input state change, n08 IN7 n08 IN7 n08 IN7
if this change wants to be noticed. n09 IN8 n09 IN8 n09 IN8
n10 COM 5-8 n10 COM 5-8 IN21 n10 COM 5-8
n11 IN9 n11 IN9
Isolation n12 IN10 n12 IN10
IN19 IN27
R=3k n13 IN11 n13 IN11
IN 1
n14 IN12 n14 IN12
n15 COM 9-12 n15 COM 9-12 IN31
R=3k
IN 2 n16 IN13 n16 IN13
n17 IN14 n17 IN14
R=3k IN20 IN28
IN 3
n18 IN15 n18 IN15
n19 IN16 n19 IN16
R=3k CMC-99/141 n20 COM 13-16 n20 COM 13-16
Interface
IN 4 Main board
n21 IN17
n22 IN18
IN29
COM 1-4
n23 IN19
Internal structure All COMs are isolated n24 IN20
IN 5
of the digital input from each other and
IN 6 module optoisolation n25 COM 17-20
from the device GND
IN 7 n26 IN21
IN 8 n27 IN22
COM 5-8 n28 IN23 IN30
n29 IN24
n30 COM 21-24
TECHNICAL DATA
D8 D16 D24
Number of inputs 8 (2 groups of 4 inputs each, isolated 16 (4 groups of 4 inputs each, isolated 24 (6 groups of 4 inputs each, isolated
from others signals) from others signals) from other signals)
Input signals voltage levels | Uin | < 1V (logical LOW state) | Uin | < 1V (logical LOW state) | Uin | < 1V (logical LOW state)
| Uin | > 4V (logical HIGH state) | Uin | > 4V (logical HIGH state) | Uin | > 4V (logical HIGH state)
Input current (typically) 15 mA @24V; 5 mA @10V; 2 mA @5V 15 mA @24V; 5 mA @10V; 2 mA @5V 15 mA @24V; 5 mA @10V; 2 mA @5V
Input signals representation 8 single bits: IN1-IN8; two 4-bit groups: 16 single bits: IN1-IN16; four 4-bit 24 single bits: IN1-IN24; six 4-bit
IN9-IN10; 1 byte: IN11 groups: IN17-IN20; 1 integer: IN21 groups: IN25-IN30; 1 integer: IN31
Weight 30 g 40 g 58 g
www.multicon24.eu 15
MultiCon CMC I/O modules
Input modules - universal counters
-Unit - read-only field which displays measurement unit: pulses, n08 Prg2 Counter 2 n08 Prg2 Counter 2
n09 Res2 n09 Res2
- Low Limit - value determining amount of pulses, below which in n10 COM2 n10 COM2
logical channel „Lo” state will be displayed, n11 Inp31
- High Limit - value determining amount of pulses, above which in n12 Inp32
- Function mode - specifies the counting mode: „A + B”, „A - B”, „quad”, n14 Res3
n15 COM3
- Reset now - button allowing user to manually reset the counter, n16 Inp41
- Reset mode - it allows to choose an additional resets for the counter, n17 Inp42
it has the following parameters: from log. channel or external, n18 Prg4 Counter 4
- Reset source - this parameter is visible when Reset mode is set as n19 Res4
n20 COM4
from log. channel or both, it contains a list of logical channels and the
chosen one will reset the counter when its value is higher than 0, Pin description:
- Prog. inp. mode - specifies counter reaction on higher than 0 value Inp[n]1, Inp[n]2 : counting inputs, pulse
appearance on Prog. input, Prg[n] : programmable inputs
Res[n] : reset inputs
- Filter - sets filter on counter inputs which allows getting rid of
COM[n] : common inputs
negative effects of signal bounces; it has the following parameters: [n] = counter number
disable, 10 ÷ 90.
TECHNICAL DATA
CP2 CP4
Number of inputs 2 counters (2 groups x 4 inputs, every group isolated 4 counters (4 groups x 4 inputs, every group isolated
from the other signals) from the other signals)
Input signals voltage levels | Uin | < 1V (logical LOW state) | Uin | < 1V (logical LOW state)
| Uin | > 10V (logical HIGH state) | Uin | > 10V (logical HIGH state)
Insulation strength 2 kV 2 kV
Max input frequency 5 kHz* (for quad signals); 10 kHz (for other signals) 5 kHz* (for quad signals); 10 kHz (for other signals)
Weight 35 g 42 g
www.multicon24.eu 16
MultiCon CMC I/O modules
Input modules - hourmeters
The HM2 and HM4 are the hourmeters modules developed for the MultiCon
units. Allow to measure period of time between START and STOP signals, as
well as sum of periods. These modules are ideal solution to control working
time of a machinery, duration of phenomena or for maintenance purposes.
They have 2 or 4 independent couters. Each counter is equipped with 2
inputs - START/STOP and PRG (programmable), which can be set as
asynchronous RESET, HOLD or used as independent digital input.
HM2
TECHNICAL DATA
HM2 HM4
Input signals voltage levels | Uin | < 1V (logical LOW state) | Uin | < 1V (logical LOW state)
| Uin | > 10V (logical HIGH state) | Uin | > 10V (logical HIGH state)
Insulation strength 2 kV 2 kV
Precision / Temp. stability ±30 ppm @ +25°C / ±50 ppm/K ±30 ppm @ +25°C / ±50 ppm/K
Weight 28 g 33 g
www.multicon24.eu 17
MultiCon CMC I/O modules
Input modules - analogue flowmeters
The FI modules have been especially designed for the MultiCon units used in
flow measurement applications. They allow user to display and record both
actual flow (rate) and total flow (volume).
These modules have extra 2 or 4 analogue inputs for general purpose use.
Each flow channel is equipped with IN[n] input and common ground GND. All
inputs are galvanically separated from the device, however have common
ground. The user can, thanks to Scaling parameter in Logical channel,
interpret measured current by the device at its discretion, which allows to
cooperate with any kind of analogue output sensors. The general purpose
use current inputs have common ground and they are isolated from the
supply voltage and other modules.
FI2
(flowmeter)
n01
4 x 0-20mA
IN1 2 x 0-20mA
time base which is used during the measurement, n01
n02 IN2
IN2 (flowmeter)
- Low limit - value which determines measured current, below which in logical n02
n03 IN3
n03 IN3
channel „Lo” state will be displayed, 2 x 0-20mA n04 IN4
n04 IN4
- High limit - value which determines measured current, above which in logical n05 GND
n05 GND
channel „Hi” state will be displayed, IN5
4 x 0-20mA
n06
- Balance - submenu which contains totalizer settings: n07 IN6
ź Reset now - manual reset of the totalizer, IN7
n08
ź Reset mode - turns on and off reset from logical channel, IN8
n09
ź Reset source - allows to choose a logical channel from the list, which will GND
n10
reset the totalizer, when value in this channel will be greater than 0,
ź Strobe mode - turns on and off balance calculating from logical channel,
ź Strobe source - allows to choose logical channel from the list, which will
hold balance calculating in totalizer,
ź Counting direction - turns on and off change of the counting direction,
ź Direction source - allows to choose a logical channel from the list, which
will change the counting direction.
TECHNICAL DATA
FI2 FI4
Measurement range flow input modes: 0 ÷ 20 mA, 4 ÷ 20 mA flow input modes: 0 ÷ 20 mA, 4 ÷ 20 mA
flow input units: 1/sec, 1/min, 1/h flow input units: 1/sec, 1/min, 1/h
current input: 0 ÷ 20 mA, 4 ÷ 20 mA current input: 0 ÷ 20 mA, 4 ÷ 20 mA
Hardware limitation current: 0 mA ÷ 24 mA current: 0 mA ÷ 24 mA
Sampling period 50 ms * 50 ms *
Weight 28 g 33 g
The FT modules have been especially designed for the MultiCon units used in
flow or rate measurement applications. They allow user to display and record
both actual flow (rate) and total flow (volume). These modules have extra 2
or 4 analogue inputs for general purpose use. Each pulse channel is equipped
with counting inputs: Inp[n]1, Inp[n]2 and common ground COM[n]. All
pulse channels are galvanically separated from the device and from
themselves. The general purpose use current inputs have common ground
and they are isolated from the supply voltage and other modules.
FT4 FT2 and FT4 modules can be used also as high speed quadrature counters.
FT2
- Mode - defines the time base which is used during the measurement (pulses per n02 Inp12 n02 Inp12
second, pulses per minute, pulses per hour), n03 COM1 n03 COM1
- Low limit - value which determines amount of pulses, below which in logical n04 Inp21 n04 Inp21
- High limit - value which determines amount of pulses, above which in logical n06 COM2 n06 COM2
4 x 0-20mA
- Balance - submenu which contains totalizer settings: Reset now; Reset mode; Pin description: n14 IN6
Reset source; Strobe mode; Strobe source; Counting direction; Direction source. Inp[n]1, Inp[n]2 : data n15 IN7
inputs for tachometer [n], IN8
n16
COM[n] : COM for
n17 GND
TECHNICAL DATA tachometer [n]
FT2 FT4
Number of inputs 2 x pulse flow or ratemeters (isolated) + 2 x current 4 x pulse flow or ratemeters (isolated) + 4 x current
Measurement range flow / tacho input units: 1/sec, 1/min, 1/h flow / tacho input units: 1/sec, 1/min, 1/h
current input: 0 ÷ 20 mA, 4 ÷ 20 mA current input: 0 ÷ 20 mA, 4 ÷ 20 mA
Hardware limitation current: 0 mA ÷ 24 mA current: 0 mA ÷ 24 mA
Sampling period 50 ms * 50 ms *
Weight 42 g 50 g
www.multicon24.eu 19
MultiCon CMC I/O modules
Output modules - current
Passive
Passive
Passive
OUT 4 OUT 6 OUT 8
n02 n02 n02
IO2
Current outputs parameters are:
- Name - read-only output name given by the device,
n03 n03 n03
Passive
Passive
- Unit - current outputs have constant unit, „mA”,
Passive
OUT 3 OUT 5 OUT 7
n04 n04 n04
- Source - contains a logical channels list, where selected
one will be data source for current output,
- Lower and Upper level (Input levels parameter block) -
limits input signal range which is downloaded from Source n05 n05
Passive
n05 n05
Passive
Passive
Passive
OUT 2 OUT 2 OUT 4 OUT6
parameter, below this range the input signal will be equal n06 n06 n06 n06
to Lower level and above this range the input signal will
be equal to Upper level,
- Lower and Upper level (Output levels parameter block) - n07 n07 n07 n07
Passive
Passive
Passive
Passive
defines output signal changes range, below this range the n08
OUT 1
n08
OUT 1
n08
OUT 3
n08
OUT 5
Passive
OUT 2 OUT 4
- Alarm level - defines output value which appears when n10 n10
Passive
OUT 1 OUT 3
n12 n12
TECHNICAL DATA
Overload protection Internal resettable fuse Internal resettable fuse Internal resettable fuse Internal resettable fuse
50 mA 50 mA 50 mA 50 mA
Output current precision 0.1% @25°C, 50 ppm/°C 0.1% @25°C, 50 ppm/°C 0.1% @25°C, 50 ppm/°C 0.1% @25°C, 50 ppm/°C
Insulation strength 1 min @ 500V AC 1 min @ 500V AC 1 min @ 500V AC 1 min @ 500V AC
Weight 23 g 30 g 38 g 53 g
www.multicon24.eu 20
MultiCon CMC I/O modules
Output modules - SSR
Built-in outputs parameters in the PWM mode are: n07 OUT6 n07 OUT6 n07 OUT6
- Name - read-only output name given by the device, n08 OUT7 n08 OUT7 n08 OUT7
- Mode - this parameter allows the user to select method of the output operation, n09 OUT8 n09 OUT8 n09 OUT8
- Source - it contains the Logical channels list, the chosen one will be data source n10 GND n10 GND n10 GND
- Level - defines the source signal level at which the output switches the state n13 OUT10 n13 OUT10
n14 OUT11 n14 OUT11
(from low to high state or vice versa from high to low state), occurs for the
n15 OUT12 n15 OUT12
mode,
n16 OUT13 n16 OUT13
- Lower level and Upper level - defines constant values on which depends relay
n17 OUT14 n17 OUT14
state switch (for Level mode: value), or allows to choose a logical channels from
n18 OUT15 n18 OUT15
the list, which actual value will be data for relay state switch (for Level mode: n19 OUT16 n19 OUT16
channel), n20 GND n20 GND
- Hysteresis - shifts relay levels with constant value, in the Relay operation mode, n21 +10..24V DC
- On delay - time which elapses from the moment when source data meets the Pin description: n22 OUT9
requirements for relay switch, to actual relay's switch to active state, 1, 11, 21 : supply inputs for outputs n23 OUT10
- OFF delay - time which elapses from the moment when source data meets the 1-8, 9-16 and 17-24 respectively (10- n24 OUT11
24V, max. 500 mA).
requirement for relay switch, to actual relay's switch to passive state, n25 OUT12
10, 20, 30 : GND for outputs 1-8, 9-16
- Min.ON time - minimal time when the relay is in the active state, and 17-24 (internally connected) n26 OUT13
- Min.OFF time - minimal time when the relay is in the passive state. 2-9, 12-19, 21, 29 : SSR driver outputs n27 OUT14
n28 OUT15
n29 OUT16
TECHNICAL DATA n30 GND
S8 S16 S24
Number of outputs 8 16 (in 2 groups with separate supply) 24 (in 3 groups with separate supply)
Max. current source powered internally: 10 mA, sum limited to powered internally: 10 mA, sum limited to powered internally: 10 mA, sum limited to
per output 50 mA, powered externally: 100 mA, sum 50 mA for a group, powered externally: 50 mA for a group, powered externally:
limited to 500 mA 100 mA, sum limited to 500 mA for a group 100 mA, sum limited to 500 mA for a group
Output method relay modes or PWM mode * relay modes or PWM mode * relay modes or PWM mode *
Output High Level powered internally: ≥8V powered internally: ≥8V powered internally: ≥8V
voltage powered externally: ≥(Vext. - 0.5V) powered externally: ≥(Vext. - 0.5V) powered externally: ≥(Vext. - 0.5V)
Overload protection powered internally: internal fuse 50 mA, powered internally: internal fuse 50 mA powered internally: internal fuse 50 mA
powered externally: internal fuse 500 mA (per group), powered externally: internal (per group), powered externally: internal
fuse 500 mA (per group) fuse 500 mA (per group)
Weight 32 g 42 g 69 g
The modules with relay outputs are used to switch on and off executive
device circuits in the automatics. These modules are equipped with 4, 6, 8 or
12 relay outputs.
R81
MODULE PIN ASSIGNMENT
Number of relays 4 SPDP (Switchable) 6 SPDP (Switchable) 8 SPST (N.O.) 12 SPST (N.O.)
Max. load per relay 5A, cos φ = 1 (resistive load) 5A, cos φ = 1 (resistive load) 1A, cos φ = 1 (resistive load) 1A, cos φ = 1 (resistive load)
Output operation method * disabled, above level, below disabled, above level, below disabled, above level, below disabled, above level, below
level, inside range, outside level, inside range, outside level, inside range, outside level, inside range, outside
range range range range
Insulation strength ≤1000V AC @ 60 sec. ≤1000V AC @ 60 sec. ≤1000V AC @ 60 sec. ≤1000V AC @ 60 sec.
www.multicon24.eu 22
MultiCon CMC I/O modules
Communication modules
13 B-
14 A+
15 GND Slot D- ACM module
RS-485 (2)
9 GND GND
16 RxD Port MB2 10 B- B- MASTER/
SLAVE
SLAVE
17 TxD 11 A+ A+ device
device
Port MB3
12 GND
13 B-
18 CTS
1 14 A+
19 RTS 15 GND
2 Power supply
(depending on version)
16 RxD
17 TxD
18 CTS
19 RTS
SERVICE
USB
USB
host
3 GND host
Port MB1 4 +24V DC ±5% (Imax. = 200mA) Port MB4
5 digital input
0/15..24V DC
RJ-45 MASTER
MASTER/
GND
6 GND
ETH device
RJ-45 available in standard SLAVE
B-
7 B-
RS-485
ETH
device A+
8 A+ insulated
Number of inputs/outputs 2 4 1
Input/output type USB Host, RJ-45 ETH RS-485, RS-232+RS-485, USB Host, RJ-45 ETH USB host
Hardware output limitation USB host: max current output 100 mA USB host: max current output 100 mA current output 100 mA max.
Baudrate RJ-45 ETH: 10 Mb/sec. RS-485 [bit./sec.]: 1200, 2400, 4800, 9600, 19200, 12 Mb/sec.
USB host: 12 Mb/sec. 38400, 57600, 115200
RJ-45 ETH: 10 Mb/sec.
USB host: 12 Mb/sec.
Immunity level for RJ 45 Burst (5/50ns, 5kHz): 1,5kV / 10 min Burst (5/50ns, 5kHz): 1,5kV / 10 min (± polarization)
(± polarization)
Weight 49 g 66 g 37 g
www.multicon24.eu 23
www.multicon24.eu
BRMIOEN_v1.22.071
www.multicon24.eu