Professional Documents
Culture Documents
CONTRACT NO.: JCPDI I-2006 CONTRACT TITLE: CONSTRUCTION OF ROAD 8 CONTRACTOR'S DATE: 23/07/2022
BETWEEN ROAD 5 AND 9 SUBMITTAL NO.
SUBMITTAL TITLE: BUTTERFLY VALVES FAMAT MODEL : BC3. Page: __1___ OF __1
REMARK
SPEC. REF. (IDENTIFY
MAT'L ANY
I.E. SECTION,
SOURCE (MFR SPECIFICATION REQUIREMENT PROPOSED MATERIAL DEVIATIO
PAGE, NO,, NS FM
SUPPLIER)
ETC SPECS AND
JUSTIFY
SUBMITTAL TITLE: BUTTERFLY VALVES FAMAT MODEL : BC3. Page: __1___ OF __1
REMARK
SPEC. REF. (IDENTIFY
MAT'L
I.E. SECTION, ANY
SOURCE (MFR SPECIFICATION REQUIREMENT PROPOSED MATERIAL
PAGE, NO,, DEVIATIONS
SUPPLIER) FM SPECS
ETC
AND JUSTIFY
SUBMITTAL TITLE: BUTTERFLY VALVES FAMAT MODEL : BC3. Page: __1___ OF __1
REMARK
SPEC. REF. (IDENTIFY
MAT'L ANY
I.E. SECTION,
SOURCE (MFR SPECIFICATION REQUIREMENT PROPOSED MATERIAL DEVIATION
PAGE, NO,, S FM SPECS
SUPPLIER)
ETC AND
JUSTIFY
A. Butterfly valves from 50 to 600 mm
RC SPEC A. Butterfly valves from 50 to 600 mm a) diameter, will have Ductile Iron body, stainless
331419 Manufacturer diameter, shall have iron body, stainless steel or steel SS 316 disc, resilient replaceable seat, Comply
bronze disc, resilient replaceable seat, water or Double Flanged end, position lever handles and
Page no 19 of 29 FAMAT lug end, position lever handles and shall comply
ENGINEERED
shall comply with BSEN-593-AWWA C504
.with AWWA C504 or equivalent standards .equivalent standards
Section D VALVES
BUTTERFLY
VALVES B. Where indicated on the Contract B. as per the Contract Drawings, the
SUPPLIER: Drawings, the butterfly valves shall be equipped butterfly valves will be Manual Gear Operated
Ref Drawing: SALAH & with disc drive actuators meeting AWWA C504 Type to insure low input efforts to reduce water Comply
MUSAAD design requirements. Disc drive actuators shall be hammer and could be directly mounted on top
self locking, high mechanical advantage to insure of the butterfly valve with extension stem and
Pay Item No: PETROLEU
low input efforts to reduce water hammer and surface box for operation from above the valve
M could be directly mounted on top of the butterfly
EQUIPMENT pit
valve. Disc drive actuators shall be supplied with
CO (APECO) extension stem and floor box for operation from
above the valve pit
SUBMITTAL TITLE: BUTTERFLY VALVES FAMAT MODEL : BC3. Page: __1___ OF __1
REMARK
SPEC. REF. (IDENTIFY
MAT'L ANY
I.E. SECTION,
SOURCE (MFR SPECIFICATION REQUIREMENT PROPOSED MATERIAL DEVIATION
PAGE, NO,, S FM SPECS
SUPPLIER)
ETC AND
JUSTIFY
C. Drive nut will be high strength
RC SPEC C. Drive nuts shall be high strength bronze material. Drive screw shall be
331419 Manufacturer Comply
bronze material. Drive screw shall be of of high strength carbon steel. Housing
Page no 19 of 29 FAMAT high strength carbon steel. Housing shall shall be of one piece cast iron and
ENGINEERED be of one piece cast iron and watertight watertight construction with seals on all
Section D VALVES
BUTTERFLY
construction with seals on all access access points, and corrosion resistant
VALVES points, and corrosion resistant external external coatings. Stainless steel
SUPPLIER: coatings. Stainless steel split/cutter pin, split/cutter pin, Grade SS 410, will be
Ref Drawing: SALAH & Grade 316 L, shall be provided at the
MUSAAD provided at the joint of disc drive
joint of disc drive actuator stem and actuator stem and extension stem
PETROLEU
Pay Item No: extension stem
M
EQUIPMENT
CO (APECO)