Professional Documents
Culture Documents
Specifications
Specifications
A P PL ICA TI ON M A I N S P EC IF IC A T IO N S
The Sandvik DT1130-SC is a 3-boom electro-hydraulic Carrier 1 x TC 11
jumbo for fast and accurate drilling in Safety cabin 1 x FOPS (ISO 3449)
tunneling and cavern excavation of 20 - 183 m2 cross Elevating (1 000 mm)
sections. Rock drill 3 x HFX5T
Feed 3 x TF 500-18
The advanced, electronic controlled drilling system with
Boom 3 x TB 150
added automatic functions and different optional in-
Control system 1 x TPC 563
strumentation levels enable productive and high quality
tunneling. Built-in diagnostics help to minimize mainte- Powerpack 3 x HP 575 (75,0 kW)
nance time. Air compressor 1 x CT 10 (7,5 kW)
Shank lubricating device 1 x SLU 3
The HFX5T high frequency rock drills deliver superior
Water pump 1 x WBP 3 HP (11,0 kW)
performance with high consumable life.
Main switch 1 x MSE 30
The TB 150 universal booms have a large optimum Cable reel 1 x TCR 6 E
shaped coverage and full automatic parallelism.
The booms can also be used for cross-cutting, bolt Length 17 780 mm
hole drilling and extension drilling applications. An op- Width 2 950 mm
tional basket boom for bolting and utility works is avail- Height
able. Cabin down 3 690 mm
The powerful 4-wheel-drive wheel steered carrier en- Cabin up 4 690 mm
sures rapid and safe tramming with good balance. Weight 40 500 kg
The noise and vibration insulated safety cabin provides Tramming speed
Horizontal 12,0 km/h
an ergonomic workplace with excellent visibility for
14 % = 1:7 = 8° 3,5 km/h
both tramming and drilling.
Gradeability 28 % = 1:3,5 = 15°
Noise level (EN 791, free field condition)
In cabin LpA = 80 dB
Emitted LwA = 128 dB
GENERAL DIMENSIONS
1 000
3 690
2 935
1 370
2 975
15° 400 20°
3 630 4 000
17 780 (with TF 500-18 feed)
TURNING RADIUS
6 040
11 860
TB 15 0 BOO M Filtration
Pressure 1 x 20 micron
Parallel coverage 159 m²
Boom extension 3 200 mm
Oli receiver
Feed extension
- Oil volume Max. 470 l, min. 270 l
With TF-feed 1 650 mm
- Return filtration 2 X 10 micron
Boom weight, net 3 350 kg
Tank filling 1 x electric pump
Rotation angle 358°
Oil cooling 1 x OW 30 water cooler
T PC 563 CON TRO L SY S T EM
Power control Adjustable full power
A IR C IRCUIT
Adjustable collaring power Compressor type 1 x CT 10 (7,5 kW)
Capacity 1,0 m³/min, 7 bar
Rotation control Adjustable rotation speed
Shank lubricating device 1 x SLU 3
Automatic functions One hole drilling automatics
Air consumption 250 - 350 l/min / rock drill
Collaring with
Oil consumption 180 - 250 g/h / rock drill
- Rock detect feature
- Two ramps to full power WAT ER C IRCU I T
Feed controlled percussion Water pump type 1 x WBP 3 HP (11,0 kW)
Adaptive drilling Capacity 375 l/min (15 bar)
Anti-jamming With 5 bar inlet pressure
Flushing Inlet pressure 2 - 7 bar (while drilling)
Stop and return
Outlet pressure control valve 1 x WP 100 HP
Reaming Separately adjustable
settings E L EC T R IC A L S Y ST EM
Boom controls Fully proportional Total input power 250 kW
Main switch 1 x MSE 30
H P 575 POW ER PACK
Standard voltages 380 - 690 VAC
Electric motor 1 x 75 kW
3-phase motor Voltage fluctuation Max. ± 10 %
Pump types Lighting
Percussion, feed 1 x 150 l/min variable dis- Combined working and
and boom placement axial piston pump driving lights (24 VDC) 12 x 35 W (HID) front
Rotation 1 x 80 l/min variable dis- Working lights 2 x 35 W (HID) rear
placement axial piston pump Driving lights 2 x 35 W (HID) rear
Basket boom (option) 1 x 35 l/min gear pump Automatic cable reel 1 x TCR 6 E
COVERAGE AREA
500
2 975
1 370
17 230
400
18 280
OPTIONAL EQUIPMENT
DRILLING SYSTEM CARRIER
• *) 3 x 55 kW powerpacks and 3 x HLX5T rock drills • *) Carrier TC 12 (170 kW) with transmission
Spicer HR32 000. Note: Transport width 3050 mm
• *) Feed length 14’, 16’, 20’ or 21’
• Air conditioner for cabin
• *) Telescopic feed TFX 500 series
• Cabin heating (tramming)
• Rod retainer TRR1 for one feed
• 12 VAC electric outlet and CD-player / radio readiness
• TRS two-rod system for one boom (includes TRR1)
• CD-player / radio in cabin
• Drill angle measuring instrument TMS D3
• Exhaust scrubber
• Drill angle and depth measuring instrument TMS DDSS3
• Exhaust catalyzer
• Drill position and angle measuring instrument TCAD-DS
• Operator seat
• Data logging unit TLOG for TCAD
• Complete spare wheel (front and rear)
• *) Double flushing with CT 28 compressor (18,5 kW)
• Air mist flushing kit for auxiliary water/air connection OTHER OPTIONAL EQUIPMENT
• Fire extinguisher (bottle only)
• Flushing flow control
• Manual fire suppression system ANSUL, 8 nozzles
ELECTRICAL SYSTEM
• Pressure cleaning system (15 bar) with reel
• Electric cable rubber or PUR
• High pressure cleaning system with reel and handset
• Ground fault and overcurrent unit VYK
• Automatic water hose reel THR 5 E
• *) 1 000 VAC electric system
• Water hose 1 ¾" (60 m)
• Star-Delta starting (380 – 690 VAC only)
• Greasing unit with pump, reel and nozzle
• Spotlights 2 x 70 W (24 VDC) for basket
• Automatic greasing for carrier and boom(s)
• Air cleaner IP5 with connections
• Biodegradable oils
• Basket boom SUB5iA or 5iB(Note: Change in weight)
• FOPS safety canopy for basket boom SUB5i
• *) EU, UL, CSA, AUS norms package
*) = Replaces standard component
Sandvik Mining and Construction reserves the right to change this specification without further notice.