Professional Documents
Culture Documents
03 Analysis of External Reactions
03 Analysis of External Reactions
Computation of Reactions
(same as usual)
1. ∑ F x = 0
2. ∑ F y = 0
3. ∑ Ma = 0
4. Condition Equation
(for internal hinge)
2
Example 1.
Determine the reactions at the supports for the beam shown below:
3
Example 1. (continuation)
4
Example 2.
Determine the reactions at the supports for the frame shown below:
5
Example 2. (continuation)
6
Example 3.
Determine the reactions at the supports for the frame shown below:
7
Example 3. (continuation)
8
Example 4.
Determine the reactions at the supports for the beam shown below:
9
Example 4. (continuation)
Note of the hinge, (B) and (E). Reactions r = 5
For two hinges, two equation of condition also.
ec = 2, therefore r = 3 + ec,
The structure is statically determinate:
10
Example 4. (continuation)
11
Example 5.
Determine the reactions at the supports for the frame shown below:
12
Example 5. (continuation)
Always make a FBD:
13
Example 5. (continuation)
14
Example 6. (Joint Method)
Determine the force in each member of the three-hinged truss shown:
From this point before conducting joint method, can you determine the zero force member?
15
Example 6. (continuation)
16
Example 6. (continuation)
17
Example 7. (Method of Section)
Determine the forces in members CD, DG, and GH of the truss below:
18
Example 7. (continuation)
Consider right of the cut section a-a..... By the way why right...?
Make a FBD:
19
Example 7. (continuation)
20
Example 8. (Method of Section)
Determine the forces in members CJ and IJ of the truss shown:
21
Example 8. (continuation)
22
Example 8. (continuation)
23
THANK YOU