Professional Documents
Culture Documents
Bench Dyno Verification Readings
Bench Dyno Verification Readings
1) EMISSIONS ANALYZER
The software displays the same numbers as displayed on the front panel of the emissions analyzer.
2) ENGINE TORQUE AND FUEL CONSUMPTION
340
Torque Nm
BSFC
320
6
300
280
260 4
240
220
2
200
180
160 0
1600 2000 2400 2800 3200 3600 4000
RPM
The engine performance readings agree well with the engine specifications.
3) COMBUSTION ANALYSIS
The Combustion Analysis system reads a reasonable pressure and calculates the Mass Fraction burned, and
Combustion temperature accurately.
Compression Ratio of this engine is 20.1, which, assuming an intake pressure of 0.9bar, should give a peak
motored pressure of:
P1V1^k = P2V2^k
P1 = 0.9 bar (intake pressure)
V1 = Vbdc (219+11.4 cc)
V2 = Vtdc (11.4 cc)
Take K=1.3 (air)
P2 = 0.9 *(230.4^k)/(11.4^k) = 44.8 bar
Actual data shows 44.7 bar