Professional Documents
Culture Documents
Jumo PR90028 - EN
Jumo PR90028 - EN
Many processes in food production require the use of insertion resistance thermometers / thermo-
couples for monitoring the product quality. The evaluation of the core temperature during cooking and
smoking, as well as in baking and heating, permits optimum operation and control of the process
sequence.
The extreme requirements, such as sealing against water vapor, ability to withstand pressure and
mechanical shock, resistance to oils and acids, demand high standards in manufacturing processes
and materials.
JUMO insertion temperature probes have been proven more than 100. 000 times in practical use under
such conditions.
Rigid protection tubes in stainless steel, with different measurement tips, meet the high mechanical
demands. Handles in PTFE, HTV silicone or PPS plastic have proved highly satisfactory. Connecting
cables in PTFE or silicone (with or without screening) ensure reliable transfer of the measurement. An
optional metal sheath is available for additional protection against damage.
1 2 3 4
1 Pt 100 with PTFE handle (15 mm dia.)
and PTFE-insulated connecting cable for
temperatures up to 260 °C
7 Thermocouples Ni-CrNi and Pt 100 (several 9 Thermocouples Ni-CrNi and Pt 100 (several
measurement points) with PTFE handle measurement points) with PEEK® handle and
(12mm dia.) and PTFE-insulated compensating PTFE-insulated compensating cable for
cable for temperatures up to 260 °C temperatures up to 260 °C
9 7
8
High-profile Controllers, Power units, System /
Recording technology
■
■
Process controls and programmers
Automation software
products and ■
■
■
■
Electronic thermostats /microstats
Safety temperature monitor/limiter
Digital indicators
Process controller
services ■
■
■
■
Recording instruments
Temperature transmitters
Thyristor power switches / power units
Software and accessories
e-mail: mail@jumo.net Phone: +49 661 6003-0
Analytical Measurement Thermostats and
■ pH / redox: sensors and Dial Thermometers
transmitters / controllers ■ Panel and surface mounting thermostats
■ Conductivity instrumentation: in TR, TW, TB, STW and STB versions
conductive and inductive ■ Room thermostats
■ Dissolved oxygen measurement ■ Warm-air thermostats
■ Chlorine, chlorine dioxide, ozone, ■ Ex thermostats (ATEX)
hydrogen peroxide and peracetic
■ Electronic thermostats
acid instrumentation
■ Dial thermometers as indicating
■ Fittings and accessories
and control instruments
■ Bimetallic temperature switches
■ Electronic temperature indicators
with transmitter
2008-09-30 / 00355305
■ Foil
and optimization
in thin-film technology: ■ Worldwide service network
■ Chip with connecting wires
■ Technical support line
■ Chip in SMD style on epoxy board
■ Seminars and workshops
■ Chip with terminal clamps
■ Fieldbus center
■ Chip in cylindrical style
■ Technical literature
■ Chip in SMD style
■ JUMO home page: www.jumo.net
Belgium
+49 661 6003-0 Hungary JUMO Automation Dalian Co. Ltd. info@jumo.se
JUMO Automation info@meter.com.tr
biuro@jumo.com.pl
+385 42 30 30 10
info@jumo.ro
info@jumo.it
www.jumo.hr www.jumo.it
Leipzig www.jumo.sk ales@jumo.co.uk
+49 341 4900810 www.jumo.co.uk
+49 7021 95091-0 info@jumo.cz info@jumo.nl jumo@jumo.ru info@jumo.si For further international locations