Professional Documents
Culture Documents
Ce3481 Set3
Ce3481 Set3
(Regulations 2021)
1. Find out the modulus of rigidity of the given specimen using torsion testing machine.
2. Find the hardness of the given material using Rockwell testing machine.
3. Determine the shear stress, rigidity modulus and strain energy stored in the given closed coil helical
spring.
4. Find the hardness of the given material using Brinell hardness testing machine.
5. Conduct torsion test on mild steel specimen and determine the Shear strength.
(i) Brass
7. Perform the compression test on the open coil helical spring and find out its stiffness and
rigidity modulus.
8. Determine the modulus of rigidity for the open coil helical spring.
9. Conduct tension test on mild steel specimen and draw the stress strain curve
10. Perform the tension test on the closed coil helical spring and find its stiffness and rigidity
modulus.
Page 1 of 1
11. Determine the minor losses in pipe.
13. Study the performance of the pelton turbine and draw the constant head characteristic curves.
15. Determine the Co-efficient of discharge (Cd) of a Venturimeter for any two pipes of
different diameter.
17. Determine the maximum efficiency and draw the performance characteristic curves by using
Centrifugal Pump.
18. Determine the maximum efficiency and draw the performance characteristic curves of a
Centrifugal pump by Variable speed method.
19. Determine the flow in a pipe using venturimeter and draw the calibration curves.
Page 2 of 1