Professional Documents
Culture Documents
Usg Boral Tile
Usg Boral Tile
PRODUCT
CATALOGUE
WHO WE ARE
USG Boral is a leading manufacturer and supplier of gypsum-based wall and ceiling lining systems, mineral fiber
ceiling systems, metal framing, high performance panels, compounds and accessories in Asia, Australia and the
Middle East.
USG Boral was established in 2014 when Boral Limited and USG Corporation, two giants in the global building
industry, formed a 50/50 joint venture.
Boral, headquartered in Sydney, is Australia’s largest construction materials supplier. Boral has been in operations
for over 70 years, and produces and distributes a wide range of products including quarry materials, concrete,
bricks, cementitious materials, roof tiles, timber, ashpalt, plasterboard, pavers and retaining walls
USG, headquartered in Chicago, is North America’s leading producer of gypsum boards, joint compounds and
related products for the construction and remodeling industries. USG, which has been in business for more than
110 years, is also the global leader in ceiling suspension systems and is recognized as the premier acoustical panel
and specialty ceiling systems innovator.
OUR PURPOSE
We exist to contribute to improving the lives of our employees, our customers and our communities.
People need buildings that are safe, environment-friendly comfortable and beautiful. Architects and construction
companies need more efficient ways to build. Building owners need better running buildings with lower operating
costs.
At USG Boral, we are committed to developing building solutions that answer these needs.
One way to improve life is to innovate. The best innovations start with a focus on what is needed and how it will
benefit the industry. At USG Boral, our mission is to deliver innovation that helps our customers work smarter, do
more and build better.
Through an ever-growing portfolio of groundbreaking products backed by unparalleled service at USG Boral, we
empower our customers to build their business. And we’ve done so through investing in purposeful innovation,
expanding into different markets and constantly searching for ways to increase performance and productivity.
1 / 22
CONTENTS
GYPSUM BOARDS
Standard 3
Unispan® 3
EchoStop® 3
FireStop® 4
WetStop™ 4
WetStop + FireStop™ 4
COMPOUNDS
Premium Jointing 5
Premium Premix 5
Paper Tape 5
Premium Cornice 6
Premium Casting 6
CEILINGS
Impressions™ Climaplus™ 7
Olympia Micro™ Climaplus™ 7
Mars™ Climaplus™ 7
Condado 8
Shades 8
INSTALLATION GUIDELINES
Wall Installation Guide 9-10
Ceiling Installation Guide 11-12
Jointing and Finishing Guide 13-14
New Products/Systems
2 / 22
Gypsum Boards
4 ft x 8 ft
Dimensions 4 ft x 8 ft 1200 mm x 2400 mm
4 ft x 9 ft
9 mm
Thickness 10 mm 1/2 in = 12.7 mm
12 mm
Application
3 / 22
FIRESTOP® WETSTOP™ WETSTOP + FIRESTOP™
Dimensions 4 ft x 8 ft 4 ft x 8 ft 4ft x 8 ft
Application
4 / 22
Compounds
USG Boral manufactures and supplies an extensive range of high-quality and consistent joint compounds including
bedding and base compounds, finishing, patching and skim compounds to transform your gypsum board joints, angles
and fastener heads into one seamless surface.
USG Boral Premium Joint- USG Boral Premium Premix is As a paper reinforcing tape,
ing is a gypsum-based, all a lightweight, premixed, USG Boral Paper Tape is well
purpose compound especially vinyl-based, air drying famed for strengthening
Description designed for flush jointing compound used for finishing and fine-tuning the joints of
gypsum board, internal/exter- gypsum board joints, interior drywall panels while
nal angles and fastener heads internal/external angles, and preventing visible cracking.
fastener heads.
Net Weight 20 kg 28 kg -
45 minutes (depending on 12-24 hours (depending on
Drying/Setting time -
local conditions) local conditions)
Shelf life 9 months 9 months -
Mixing ratio 1:2 (water to powder) - -
Dimension - - 50 mm x 75 m
EASE OF USE
• Easy to mix, and no lumps
• Easy to apply under shear pressure
• High strength and resists
• Fast drying time
tearing
• Easy to sand
Features • No stretch and wrinkles
• Superior center crease
PERFORMANCE
• Easier corner finish
• Excellent bond to paper tape or joint strength
• Low shrinkage
• High coverage
* Note: The 9 month shelf life indicated for the products on this page applies if the products are stored strictly following USG Boral’s storage instructions.
5 / 22
PREMIUM CORNICE PREMIUM CASTING
USG Boral Premium Cornice is a USG Boral Premium Casting is used mainly
high-strength bonding compound formulated to cast plaster products such as cornices,
Description
for adhering decorative cornices to walls corbels and other decorative moulding.
and ceilings.
Net Weight 20 kg 20 kg
Setting time 30 minutes 10 minutes
Shelf life 9 months 9 months
• High adhesion • Easy mixing
Features • Excellent wet tack • Consistent working time
• Smooth finish • Smooth pearly white finish
* Note: The 9 month shelf life indicated for the products on this page applies if the products are stored strictly following USG Boral’s storage instructions.
6 / 22
Ceilings
Noise Reduction
0.60 0.50 0.70
Coefficient (NRC)
Thickness 16 mm 16 mm 19 mm
7 / 22
USG Boral is a global leader in the manufacture of ceiling suspension systems and is recognized as a premier
acoustical panel and specialty ceilings innovator. We provide creative building solutions that set new standards for
productivity and efficiency, helping contractors and architects deliver high quality and innovative designs.
From light reflectance to sound reduction, durability to aesthetics, you’ll find the perfect panel or tile for your ceiling
projects.
CONDADO SHADES
Dimensions 2 ft x 4 ft
Thickness 9 mm
Application
8 / 22
Installation Guide
Application Steps
Step 1: Fasten floor tracks using applicable fasteners at Step 2: Transfer floor track alignment to ceiling. Install
no more than 100mm from wall; rest at no more than ceiling track similar with step 1.
300mm.
9 / 22
Step 3: Install C studs vertically along wall ends. Fasten Step 4: Install intermediate C studs, spaced at maximum of
studs to wall using applicable fasteners spaced at 610mm using 12mm thick USG Boral Standard board.
100mm (maximum); rest at 500mm (maximum). The studs open face should face a single direction.
Step 5: Fasten gypsum boards to metal frames on a Step 6: Stagger screw locations at sheet ends to provide
staggerd manner. Fasten at sheet ends using Type S fastening space for the screws.
or D gypsum screws spaced no more than 200mm on
centers. It is recommended to provide, at least, 10mm gap
at gypsum board top and bottom.
Step 7: Space screws at 300mm maximum in the field. Step 8: Use USG Boral Premium Jointing and Premium
Premix and paper tape to have a complete jointing system.
10 / 22
Installation Guide
Type S and D gypsum Power tool Wall angle Top cross rail Furring channel
scews
11 / 22
Application Steps
Step 1: Fasten wall channel or wall angle based on the Step 2: Install sofit brackets/roof brackets. Start
established ceiling finish line at 50mm, initial, and rest 300mm, maximum, from the face of the wall; rest
at 600mm on center maximum. spaced at 1200mm maximum.
Step 3: Install suspension rod, adjustable suspension Step 4: Install furring/secondary framing perpendicular
clips and top cross rail (TCR)/primary carrying channel. to top cross rail/primary carrying channel. Please refer
The sofit and ceiling brackets may be used as reference. to the table of secondary frame spacing.
Step 5: Install gypsum boards perpendicular to the Step 6: Apply jointing using USG Boral Premium
secondary framing on a staggered pattern. Fasten using Jointing, Premium Premix and Paper Tape to achieve
Type D or S gypsum screw at 300mm spacing on center. the desired level of finish.
NOTE:
• It is recommended to provide additional
12 / 22
Installation Guide
Tools Required
If required, sand joints (150-220 mesh sand paper) prior to priming and painting.
Level 5 Finish
Skimcoat entire surface plus prime and paint. Required for areas with critical or se-
vere light, dark tone paints or paint sheen levels other than flat.
The term ‘level of finish’ applies to plasterboard linings prior to decoration. As per ASTM C840 Application and Finishing
of Gypsum Board defines three levels of finish: 3, 4 and 5.
Level 4 is the default level of finish for gypsum board linings, unless specified otherwise. It is essential that the level
of finish is determined at the design stage since each level has specific requirements for substrate tolerances and
gypsum board installation, jointing and finishing.
13 / 22
Application Steps
Step 1: First coat - Fill any gaps in Step 2: First coat - Centre and press Step 3: First coat - Apply a skim coat
joints with base compound prior to the paper tape into the base compound of compound to fill the recess and
the taping process and fill recessed using a 150mm broadknife, drawing spot fastener heads.
joint with a layer of base compound along the joint with sufficient pressure
using a flexible 150mm broadknife. to remove excess compound.
Step 4: Second coat - Allow sufficient Step 5: Finishing coat - Using a trowel, Step 6: Dry sanding - Use a curved
time for the first coat of base compound to apply a coat of finishing compound trowel on the finishing coat to produce
set then apply a second coat of base approx 250mm wide, feathering out a slight convex curve. Feather out the
compound approximately 200mm approximately 25mm beyond edges of edges.
wide. Feather joint edges. the basecoat.
Recessed joint system: Follow coating width application Square joint system: Follow coating width application
for recessed joint system for square joint system
NOTES:
• Allow 24 hours or completely dry (longer in cold, wet weather conditions). Vertical joints should be kept a minimum of 200mm from the edge of openings.
• When dry, lightly sand to a smooth finish with sanding mesh or 150-220 grit paper, depending on sanding hardness of finishing compound used.
14 / 22
Australia
China
India
Indonesia
Malaysia
Middle East
New Zealand
Thailand
Philippines
Singapore
South Korea
Vietnam