Professional Documents
Culture Documents
Seko Peristaltic Pumps
Seko Peristaltic Pumps
Pumps
Your Choice,
Our Commitment
2 Peristaltic Pumps
Benefits
Peristaltic pumps provide excellent solutions to solve pumping problems, especially when the product being pumped is
particularly abrasive, corrosive or viscous.
COOLING TOWERS
Cooling towers are heat removal devices used to transfer process
Cooling Towers waste heat to the atmosphere, using cold water as heat removal
COOLING TOWERS medium. The cool water absorbs heat from the hot process
Cooling towers are heat removal devices used
streams devices
which need to be
to
Cooling towers are heat
transfer process waste heat toremoval
the atmosphere,used to cooled
using transfer or condensed,
process and the absorbed
heat warms the circulating water (C).
waste heat to the atmosphere,
cold water as heat removal The medium.using cold water as heat removal
warm The watercool water
returns to the top of the cooling tower and
medium.
absorbs The
heat cool
from water
the hot absorbs
process
tricklesstreamsheat
downwardwhichfrom
over thethe
need hot process
fill material inside the tower.
streams
to whichorneed
be cooled to be cooled
condensed, The
and or condensed,
cooling
the water has toheat
absorbed and
be the absorbed
anyway treated and the Dosing Pumps
heat warms
warms the circulating
the circulating water
in
water (C). (C).are used for Biocide, Algaecides, Chlorine chemical
this case
The warm water returns productsto the and top for
ofAnti
theScale Products,
cooling towerin combination
and with Seko’s
The warm water returns to the top
controlof the cooling
instruments for
trickles downward over the fill material inside the tower.tower
pH, ORP, EC measuring
and
Thetrickles
coolingdownward
water has over
to bethe fill material
anyway treated inside the Dosing Pumps
and the
tower.
in this case are used for Biocide, Algaecides, Chlorine chemical
products
The andwater
cooling for Anti
hasScale Products,
to be anywayin treated
combination
and with Seko’s
control
the instruments
Dosing Pumps infor pH,case
this ORP,
areECused
measuring
for Biocide,
Algaecides, Chlorine chemical products and for Anti
Scale Products, in combination with Seko’s control Innovation > Technology > Future
instruments for pH, ORP, EC measuring.w
Aquariums
Dosage of salt water into calcium reactors, dosage of
enzymes and nutrients for fishes, dosage of additives to
maintain the pure water quality necessary for aquariums’
life.
5
30-60-90-120 l/h;
25-100 l/h; 0,1 bar
0,2÷25 l/h;
0,1 bar
0,1÷6 bar
PSH Up to 10 l/h;
Kronos 50/65
0,1÷3 bar
PSE
Kronos 20
Up to 7 l/h;
0,1÷3 bar
Kronos 10 Digital
Up to 9 l/h;
0,1÷3 bar
Kronos 10 Analogic
0,02÷15 l/h;
0,1÷3 bar
0,4÷30 l/h;
0,1÷3 bar Dynamik Digital
0,4÷14 l/h;
0,1÷3 bar Dynamik Analogic
Peri 09
Peri 09 Pumps
mily of Pumps with the following General Features:
Peri 09 Pumps
Analogic Interface
Family of(but
Pumps the pump
with is always
the following controlled
General Features:by micro)
IP65 protection degree guaranteed by its
< Analogue Interface (but the pump is always enclosure in PP with
fiber glass. controlled by micro)
Insulation Class
< IP652 (no need degree
protection of grounding
guaranteed connection).
by its enclosure
Compact design makes
in PP it suitable
with fiber glass. to all kind of applications.
Family
It can be provided withof Pumps with the
fixing wall following
bracket General
for quick Features:
installation.
< Insulation Class 2 (no need of grounding connection).
Wide range of Power Supply, Flow Rates, Tubes to fit all the
Analogic
< Compact designInterface
makes(but the pump
it suitable to is
allalways
kind ofcontrolled by micro)
needs. IP65 protection degree guaranteed by its enclosure in PP with
applications.
It can be equippedfiberwithglass.
PTFE rollers for special applications
< It can be provided with fixing wall bracket for quick
such as Chlorine Dosage
Insulation
installation.
in swimming
Class 2 (no needpools.of grounding connection).
Available on request with transaxle
Compact design makes technology toall
it suitable to assure
kind oflonger
applications.
< Wide
range
It can of Power
be providedSupply,
with Flow Rates,
fixing wall Tubes
bracket to fit
for quick installation.
motor and tubing life.
all the needs.
Wide range of Power Supply, Flow Rates, Tubes to fit all the
needs.
< It can be equipped with PTFE rollers for special
It can besuch
applications equipped with Dosage
as Chlorine PTFE rollers for special applications
in swimming
PLICATIONS: often used for dosage of Chlorine in Domestic
pools.such as Chlorine Dosage in swimming pools.
ove Ground pools
(from 1 to
Available on110 m.c.).
request with transaxle technology to assure longer
< Available on request with transaxle technology to
motor and tubing life.
assure longer motor and tubing life.
91
82 DIMENSIONAL DRAWING
91
82
108
127
108
107
127
7
Peri 09 Pumps
Peri 09 Pumps
KEY CODE
1, 2, 3 Family, Function
PPE Peri09 peristaltic pumps, Fixed Flow rate
PPR Peri09 peristaltic pumps, Speed Regulation
PPM Peri09 peristaltic pumps, Timed Dosing
4, 5 Back pressure
00 0,1 bar
0H 0,5 bar
1H 1,5 bar
03 3 bar
6, 7 Flow Rate
0H 0,4 l/h (6,6 ml/min)
1H 1,5 l/h (25 ml/min)
2H 2,5 l/h (41,6 ml/min)
03 3 l/h (50 ml/min)
04 4 l/h (67 ml/min)
05 5 l/h (83,3 ml/min)
06 6 l/h (100 ml/min)
07 7 l/h (116,7 ml/min)
10 10 l/h (166,6 ml/min)
14 14 l/h (233,3 ml/min)
18 18 l/h (300 ml/min)
8 Power Supply
A 230 Vac
B 24 Vac
D 24 VDC
M 100÷240 Vac
9 Membrane tubes
1 Santoprene
2 Sekobrill
3 Sekoflex
5 Sekoextra
6 Sekomed
8 Sekofort
9 Sekolast
10, 11, 12 Customization
000 No customization
PPM 03 1H A 1 000
Peri
Peri 0909
Peri 09 Pumps
Pumps
Pumps
Available Models AVAILABLE MODELS
AVAILABLE MODELS
PPE
Models
PPE with Fixed Flow Rate.
2 PPE
Rollers. with Fixed Flow Rate.
Models
Models
Motors: with Fixed Flow
Synchronous Rate. or Brushed DC motors.
AC motors
2 Rollers.
2
FlowRollers.
Rates:Synchronous
from 0,4 l/h up
Motors: ACtomotors
14 l/h. or Brushed DC motors.
Motors:
Tubes: Synchronous
Santoprene or AC motors
Sekobrill (other ormaterials
BrushedonDCrequest).
motors.
Flow Rates: from 0,4 l/h up to 14 l/h.
Flow
Power Rates:
Supply: from 0,4 l/h
230 Vacor50/60up to 14 l/h.
Hz, 24(other
Vac, 24materials
V DC
Tubes: Santoprene Sekobrill on request).
Tubes: Santoprene or Sekobrill (other materials on request).
CODE VALUES
CODE VALUES
Back Power Back Pressure Flow Rate
Family Back Flow Rate Power Tube Back Pressure Flow Rate Power Supply Tube Material
Family Pressure Flow Rate Supply Tube bar (psi) l/h (ml/min) Power Supply Tube Material
Pressure Supply bar (psi) l/h (ml/min)
PPE 00 0H A 1 0,1 (1,5) 0,4 (6,6) 230 Vac Santoprene
PPE 00 0H A 1 0,1 (1,5) 0,4 (6,6) 230 Vac Santoprene
PPE 00 1H A 1 0,1 (1,5) 1,5 (25) 230 Vac Santoprene
PPE 00 1H A 1 0,1 (1,5) 1,5 (25) 230 Vac Santoprene
PPE 00 03 A 1 0,1 (1,5) 3 (50) 230 Vac Santoprene
PPE 00 03 A 1 0,1 (1,5) 3 (50) 230 Vac Santoprene
PPE 00 04 D 1 0,1 (1,5) 4 (67) 24 VDC Santoprene
PPE 00 04 D 1 0,1 (1,5) 4 (67) 24 VDC Santoprene
PPE 00 05 A 1 0,1 (1,5) 5 (83,3) 230 Vac Santoprene
PPE 00 05 A 1 0,1 (1,5) 5 (83,3) 230 Vac Santoprene
PPE 00 06 A 1 0,1 (1,5) 6 (100) 230 Vac Santoprene
PPE 00 06 A 1 0,1 (1,5) 6 (100) 230 Vac Santoprene
PPE 00 07 D 1 0,1 (1,5) 7 (116,7) 24 VDC Santoprene
PPE 00 07 D 1 0,1 (1,5) 7 (116,7) 24 VDC Santoprene
PPE 00 14 D 1 0,1 (1,5) 14 (233,3) 24 VDC Santoprene
PPE 00 14 D 1 0,1 (1,5) 14 (233,3) 24 VDC Santoprene
PPE 1H 1H A 2 1,5 (22) 1,5 (25) 230 Vac Sekobrill
PPE 1H 1H A 2 1,5 (22) 1,5 (25) 230 Vac Sekobrill
PPE 03 0H A 2 3 (45) 0,4 (6,66) 230 Vac Sekobrill
PPE 03 0H A 2 3 (45) 0,4 (6,66) 230 Vac Sekobrill
PPE 03 1H A 2 3 (45) 1,5 (25) 230 Vac Sekobrill
PPE 03 1H A 2 3 (45) 1,5 (25) 230 Vac Sekobrill
Power Supply: 230 Vac 50/60 Hz, 24 Vac, 24 V DC
Power Supply: 230 Vac 50/60 Hz, 24 Vac, 24 V DC
PPM
PPM
PPM with Dosing Time Adjustable through a potentiometer from 0s to 30s.
Models
Models with Dosing Time Adjustable through a potentiometer from 0s to 30s.
2 Models
Rollers. with Dosing Time Adjustable through a potentiometer from 0s to 30s.
2 Rollers.
Motors: Brushed DC motors.
2 Rollers.
Motors:
Max
Brushed DC0,4motors.
Motors: Rates:
Flow from
Brushed l/h up to 10 l/h.
DC motors.
Max
Tubes: Flow Rates: from 0,4 (other
l/h up to 10 l/h.on request).
Max Flow Rates: from 0,4 l/h upmaterials
Santoprene, Sekobrill to 10 l/h.
Tubes:
Power Santoprene,
Supply: Sekobrill
50/60 Hz (other
230 Vac Sekobrill materials on request).
or 24 Vac.
Tubes: Santoprene, (other materials on request).
CODE VALUES
CODE VALUES
Back Power Back Pressure Flow Rate
Family Back Flow Rate Power Tube Back Pressure Flow Rate Power Supply Tube Material
Family Pressure Flow Rate Supply Tube bar (psi) l/h (ml/min) Power Supply Tube Material
Pressure Supply bar (psi) l/h (ml/min)
PPM 00 0H A 2 0,1 (1,5) 0,7 (11,7) 230 Vac Sekobrill
PPM 00 0H A 2 0,1 (1,5) 0,7 (11,7) 230 Vac Sekobrill
PPM 00 03 A 1 0,1 (1,5) 3 (50) 230 Vac Santoprene
PPM 00 03 A 1 0,1 (1,5) 3 (50) 230 Vac Santoprene
PPM 00 10 A 1 0,1 (1,5) 10 (166,7) 230 Vac Santoprene
PPM 00 10 A 1 0,1 (1,5) 10 (166,7) 230 Vac Santoprene
PPM 03 0H A 2 3 (45) 0,4 (6,66) 230 Vac Sekobrill
PPM 03 0H A 2 3 (45) 0,4 (6,66) 230 Vac Sekobrill
PPM 03 1H A 2 3 (45) 1,5 (25) 230 Vac Sekobrill
PPM 03 1H A 2 3 (45) 1,5 (25) 230 Vac Sekobrill
PPM 03 2H A 2 3 (45) 2,6 (43) 230 Vac Sekobrill
PPM 03 2H A 2 3 (45) 2,6 (43) 230 Vac Sekobrill
Power Supply: 230 Vac 50/60 Hz or 24 Vac.
Power Supply: 230 Vac 50/60 Hz or 24 Vac.
Peri 09 Pumps
Peri 09 Pumps
PPR
Models with Flow Rate Adjustable through a potentiometer from 12% to 100%
2 PPR
Rollers.
Models
Power with 230
Supply: FlowVacRate Adjustable
50/60 through
Hz, 24 Vac, a potentiometer from 12% to 100%
24 V DC.
2 Rollers.
Motors: Brushed DC motors.
Power
Max FlowSupply: 230 1Vac
Rates: from l/h50/60 Hz,l/h.
up to 18 24 Vac, 24 V DC.
Motors: Brushed DC motors.
Tubes: Santoprene, Sekobrill, Sekolast, Sekoextra (other materials on request).
Max Flow
Power Rates:
Supply: fromVac
100-240 1 l/h up Hz,
50/60 to 18
230l/h.
Vac 50/60 Hz, 24 Vac, 24 V DC
Tubes: Santoprene, Sekobrill, Sekolast, Sekoextra (other materials on request).
CODE VALUES
Back Max Flow Power Back Pressure Flow Rate
Family Tube Power Supply Tube Material
Pressure Rate Supply bar (psi) l/h (ml/min)
PPR 00 04 A 1 0,1 (1,5) 4 (67) 230 Vac Santoprene
PPR 00 04 M 1 0,1 (1,5) 4 (67) 24÷240 Vac Santoprene
PPR 00 07 A 1 0,1 (1,5) 7 (116,7) 230 Vac Santoprene
PPR 00 07 A 1 0,1 (1,5) 7 (116,7) 24÷240 Vac Santoprene
PPR 00 18 A 1 0,1 (1,5) 18 (300) 230 Vac Santoprene
PPR 00 18 M 1 0,1 (1,5) 18 (300) 24÷240 Vac Santoprene
PPR 0H 01 M 2 3 (45) 1 (16,67) 100÷240 Vac Sekobrill
PPR 03 01 A 2 3 (45) 1 (16,67) 230 Vac Sekobrill
PPR 03 01 M 2 3 (45) 1 (16,67) 24÷240 Vac Sekobrill
PPR 03 03 A 9 3 (45) 3 (50) 230 Vac Sekolast
PPR 03 1H M 2 3 (45) 1,5 (25) 100÷240 Vac Sekobrill
Power Supply: 100-240 Vac 50/60 Hz, 230 Vac 50/60 Hz, 24 Vac, 24 V DC
PSE
PSE Pumps
PSE Pumps
Pumps
PSE Pumps
Family
amily of Pumps withofthe
Pumps with General
following the following General
Characteristics:
Characteristics:
Family of Pumps with the following General Characteristics:
Family ofPump
< Bigger Pumps with
size following85General
thediameter
(bell mm) forCharacteristics:
high
Bigger Pumpflow sizerate.
(bell diameter 85 mm) for high flow rate.
Bigger Pump size (bell diameter 85 mm) for high flow rate.
Analogic Interface.
Bigger Pump size (bell diameter 85 mm) for high flow rate.
Analogic Interface.
< Analogue Interface.
Analogic
IP54 protection degree. Interface.
IP54
< IP54IP54protection
protection
protection degree.
degree.
degree.
Fixing bracket available
Fixing bracket for quick
available wallquick
fixing.
< Fixing
Fixing bracket
bracket available forfor
available quick wallwall
for quick fixing.
fixing.
wall fixing.
230 Vac Power 230
< 230 Supply,
Vac Power66 W Power
Supply, 66 Consumption.
W Power Consumption.
230 VacVac Power
Power Supply,
Supply, 66 W 66Power
W Power Consumption.
Consumption.
ConstantDosage,
Constant continuous
Constant Dosage,
Dosage, run not admitted.
continuous
continuous run not admitted.
< Constant Dosage, continuous runrun
notnot admitted.
admitted.
Flow Rates 25
Flowor Rates
Flow100 l/h.
Rates 2525oror100
100l/h.
l/h.
< Flow Rates 25 or 100 l/h.
It can
It can be equipped bewith
It can beequipped with
withPTFE
PTFE rollers
equipped forrollers
PTFE special
rollers for special applications.
forapplications.
special applications.
< It
suchcanasbe
such as equipped
Chlorine
Chlorine with in
Dosage
Dosage PTFE
in rollers for
swimming
swimming special
pools.
such as Chlorine Dosage in swimming pools.
applications. such as Chlorine Dosage in swimming
pools.
APPLICATIONS: PSE peristaltic pumps are mainly used for
APPLICATIONS:
APPLICATIONS: PSE pumps
PSE peristaltic peristaltic
arepumps
mainlyareused
mainly
forused for
condensate
condensate removal.They
removal. Theyare
areparticularly
particularly suitable
suitable for
forair
air
Applications:
ondensate removal. They evaporators,
conditioners, are particularly suitable
refrigerated for air
display cases.
conditioners, evaporators, refrigerated display cases.
onditioners,PSE
evaporators, refrigerated
peristaltic pumps are mainlydisplay
used forcases.
condensate
removal. They are particularly suitable for air
conditioners, evaporators, refrigerated display cases.
DIMENSIONAL DRAWING
DIMENSIONAL DRAWING
DIMENSIONAL DRAWING
AVAILABLE MODELS
Rate AVAILABLE
PSE 00
Back 25 A
Power 1 MODELS
0,1Pressure
Back (15) 25Flow
(416,7)
Rate 230 Vac Santoprene
Family 00 Flow 25
PSE Pressure A Tube
2 0,1 (15) 25 (416,7) Power
230 VacSupply Sekobrill
Tube Material
Supply bar (psi) l/h (ml/min)
PSEPSE 000
CODE
100
25 AA 11 0,1
0,1(15)
(15) 10025(1667)
(416,7) 230230
VacVac Santoprene
VALUES Santoprene
PSE 00 25 A 2 0,1 (15) 25 (416,7) 230 Vac Sekobrill
Back Power Back Pressure Flow Rate
Family PSE Flow0Rate 100 Tube
A 1 0,1 (15) Power Supply
100 (1667) 230 VacTubeSantoprene
Material
Pressure Supply bar (psi) l/h (ml/min)
11
PSH Pumps
PSH Pumps
PSH Pumps
Family
FamilyofofPumps
Pumps with thethe
with following General
following Characteristics:
General Characteristics:
FamilyPump
< Bigger
Family of Pumps
of size with
Pumps (bell diameter
with 85 mm)
the following
the following for high
General
General flow rates.
Characteristics:
Characteristics:
Bigger Pump
< Analogue size (but
Interface (bellthe
diameter
pump is85 mm)controlled
always for high flow rates.
by micro).
< IP65 protection degree guaranteed by its enclosure in PP. by micro).
Analogic
Bigger Interface
Bigger Pump size(but
Pump size (bellthe
(bell pump
diameter
diameter is
85
85 always
mm) for
mm) forcontrolled
high flow
high flow rates.
rates.
IP65 Analogic Interface
protection
Analogic degree
Interface (butguaranteed
(but the pump
the pump is isby
always controlledinby
its enclosure
always controlled by micro).
PP.
micro).
< Fixing IP65bracket available
protection for quick
degree wall fixing.
guaranteed byfixing.
its enclosure
enclosure in
in PP.
PP.
Fixing
IP65 bracket
protectionavailable
degree for quick wallby
guaranteed its
< Multi
Multi Power
Fixing
Power
Fixing Supply
bracket
Supply
bracket 100÷240
available
100÷240
available Vac
for
for @ 50/60
quick
Vac
quick @
wall Hz.
wall50/60
fixing.Hz.
fixing.
< ConstantMulti Dosage
Constant
Multi Power
Power
DosageSupply
with
Supply
with 100÷240
selectable
100÷240 Vacspeed.
speed.
selectableVac @ 50/60
@ 50/60 Hz. Hz.
Constant
Constant
SelectableFlow
< Selectable Dosage
Dosage
Flow Rate
Rate with
with
viavia selectable
selectable
jumper
jumper speed.
speed.
on circuit
on circuit board board (30-60-90
(30-60-90 or 120orl/h).
Selectable
Selectable Flow Rate
Flow Rate via
via jumper
jumper on on circuit
circuit board
board (30-60-90
(30-60-90 oror
< It120
can l/h).
be equipped
120 l/h).
l/h). with PTFE rollers for special applications such as Chlorine
Dosage 120
It can be
inbeequipped with
swimming PTFE rollers for special applications
suchIt can
It can equippedpools.
be equipped with PTFE
with PTFE rollers
rollers for
for special
special applications
as Chlorine Dosage in swimming pools. applications
Applications:
such as
such as Chlorine
Chlorine Dosage
Dosage in in swimming
swimming pools.
pools.
APPLICATIONS:
All kind AllAll
kind
of applications
APPLICATIONS: ofofapplications
where
kind where
high flow rates
applications wherearehigh flowrates
needed,
high flow rates arestrong
without
are
APPLICATIONS: All kind of applications where high flow rates are
needed, without
backpressures at strong
delivery.
needed, without
without strong backpressures
strong backpressures at
backpressures at delivery.
at delivery.
delivery.
needed,
DIMENSIONAL
DIMENSIONAL DRAWING
DIMENSIONAL DRAWING
DRAWING
AVAILABLE
AVAILABLE MODELS
MODELS
CODE
CODE AVAILABLE MODELS VALUES
VALUES
Family Back Flow Rate Power
Back Power Back Pressure Flow Rate
Tube Back Pressure Flow Rate VALUESPower
Family Flow Rate Supply
Pressure CODE Tube bar Power Supply Tube Material
Supply Tube Material
Pressure Supply bar (psi)
(psi) l/h
l/h (ml/min)
(ml/min)
PSH
PSH Back
00 Flow 0H
00 0H Power
M
M 1
1 Back
0,1Pressure
0,1 (15)
(15) Flow Rate 100÷240
30-60-90-120
30-60-90-120 100÷240 Vac Santoprene
Vac Santoprene
Family Rate Tube Power Supply Tube Material
PSH
PSH Pressure
00
00 0H
0H Supply
M
M 2
2 bar
0,1 (psi)
0,1 (15)
(15) l/h (ml/min)
30-60-90-120 100÷240
30-60-90-120 100÷240 Vac
Vac Sekobrill
Sekobrill
PSHPSH
PSH 0000
00 0H
0H
0H MM
M 133 0,1(15)
0,1
0,1 (15) 30-60-90-120
(15) 30-60-90-120100÷240
30-60-90-120 100÷240
100÷240 VacVac Sekoflex
Vac Santoprene
Sekoflex
PSH 00 0H M 2 0,1 (15) 30-60-90-120 100÷240 Vac Sekobrill
PSH 00 0H M 3 0,1 (15) Innovation
30-60-90-120 100÷240 Vac> Technology >> Future
Sekoflex
Innovation > Technology Future
12 Peristaltic Pumps
DIMENSIONAL DRAWING
DIMENSIONAL DRAWING
110
110
127
127
102
102
Dynamik
Dynamik Analogue
Dynamik Analogic
Analogic Pumps
Pumps Pumps
KEY CODE
KEY CODE
1, 2, 3 Family, Function
1, 2, 3 Family, Function
NPE Dynamik peristaltic pumps, Fixed Flow rate
NPE Dynamik peristaltic pumps, Fixed Flow rate
NPR Dynamik peristaltic pumps, Speed Regulation
NPR Dynamik peristaltic pumps, Speed Regulation
NPM Dynamik peristaltic pumps, Timed Dosing
NPM Dynamik peristaltic pumps, Timed Dosing
NTS Dynamik “Season” peristaltic pumps, Time/Speed regulation
NTS Dynamik “Season” peristaltic pumps, Time/Speed regulation
4, 5 Back pressure
4, 5 Back pressure
00 0,1 bar
00 0,1 bar
0H 0,5 bar
0H 0,5 bar
1H
1H
1,5
1,5 bar
bar
03
03 33 bar
bar
6,6,77 Flow Rate
Flow Rate
0H
0H 0,4
0,4 l/hl/h (6,6
(6,6 ml/min)
ml/min)
1H
1H 1,5 l/h (25 ml/min)
1,5 l/h (25 ml/min)
2H
2H 2,5
2,5 l/h l/h (41,6
(41,6 ml/min)
ml/min)
01
01 11 l/h (16,7 ml/min)
l/h (16,7 ml/min)
04
04 44 l/h
l/h (67
(67 ml/min)
ml/min)
07
07 77 l/h
l/h (116,7
(116,7 ml/min)
ml/min)
18
18 18
18 l/h (3000 ml/min)
l/h (3000 ml/min)
28
28 28
28 l/hl/h (466,7
(466,7 ml/min)
ml/min)
30
30 30
30 l/hl/h (500
(500 ml/min)
ml/min)
88 Power
Power Supply
Supply
AA 230 Vac
230 Vac
BB 24 Vac
24 Vac
DD 24 VDC
24 VDC
MM 100÷240
100÷240 VacVac
99 Membrane tubes
11 Santoprene
22 Sekobrill
33 Sekoflex
55 Sekoextra
66 Sekomed
10, 11, 12 Customization
Customization
000 customization
No customization
NPE
NPE 00
00 1H
1H AA 33 000
AVAILABLE MODELS
AVAILABLE MODELS
NPM
NPM
NPM
Models
Modelswith
Models Dosage
with
with Adjustable
Dosage
Dosage through
Adjustable
Adjustable through
through a potentiometer fromfrom
aapotentiometer
potentiometer 0s to 0s
from 30to
s. 30 s.
2 Rollers.
22Rollers.
Rollers.
Power Supply:
Power
Power 230230
Supply:
Supply: VacVac
230 50/60 Hz, 24
Vac50/60
50/60 Vac,
Hz,
Hz, 242424 V DC.
Vac,
Vac, 24 VV DC.
24 DC.
Motors: Brushed
Motors:Brushed
Motors: DC
BrushedDCmotors.
DCmotors.
motors.
Max Flow
Max
Max Rates:
Flow
Flow fromfrom
Rates:
Rates: 1,5 l/h
from up
1,5
1,5 toup
l/h
l/h 2,6to
up l/h.
to 2,6l/h.
2,6 l/h.
Tubes: Sekobrill (other
Tubes:Sekobrill
Tubes: materials
Sekobrill(other
(othermaterialson request).
materialson onrequest).
request).
CODE
CODE VALUES
Back
Back Power Back Pressure
Pressure Flow Rate
Family
Family Flow Rate Power Tube Back Power Supply Tube Material
Pressure Flow Rate Supply
Pressure Supply Tube bar (psi)
bar (psi) (ml/min) Power Supply Tube Material
l/h (ml/min)
l/h
NPM
NPM 03
03 1H
1H M
M 22 33 (45)
(45) 1,5 (25)
1,5 (25) 100÷240
100÷240 Vac
Vac Sekobrill
Sekobrill
NPM
NPM 03
03 2H
2H AA 22 33 (45)
(45) 2,6 (43,3)
2,6 (43,3) 230
230 Vac
Vac Sekobrill
Sekobrill
Innovation
Innovation >> Technology
Technology >>Future
Future
14 Peristaltic Pumps
Dynamik Analogue
Dynamik Analogic Pumps Pumps
Dynamik Analogic Pumps
NPE
NPE
Models
Models
NPE with
with Fixed
Fixed FlowFlow Rate.
Rate.
2 Rollers.
2 Rollers.
Models with Fixed Flow Rate.
Power
PowerSupply:
Supply:230230
VacVac50/60 Hz, 100÷240
50/60 Hz, 100÷240Vac 50/60 Hz. Hz.
Vac 50/60
2 Rollers.
Motors:
Motors:Synchronous
Synchronous AC ACmotors or Brushed
motors or DC motors.
Brushed DC motors.
Power Supply: 230 Vac 50/60 Hz, 100÷240 Vac 50/60 Hz.
Flow
FlowRates: from
Rates: from0,4 0,4
l/h up
l/h to 28
tol/h.
Motors: Synchronous ACupmotors28 or
l/h.Brushed DC motors.
Tubes: Santoprene,
Tubes: Santoprene, Sekoflex or Sekobrill
Sekoflex or (other
Sekobrill materials
(other on request).
materials on request).
Flow Rates: from 0,4 l/h up to 28 l/h.
Tubes: Santoprene, Sekoflex
CODE or Sekobrill (other materials on request). VALUES
Back CODERate Power Back Pressure Flow Rate
VALUES
Family Flow Tube Power Supply Tube Material
Pressure
Back Supply
Power BackbarPressure
(psi) l/h (ml/min)
Flow Rate
Family
NPE Flow03Rate Tube Power
230 Supply Tube Material
00
Pressure A
Supply 3 0,1 (1,5)
bar (psi) l/h 3(ml/min)
(50) Vac Sekoflex
NPE
NPE 00
00 1H
03 A
A 3
3 0,1 (1,5)
0,1 (1,5) 1,5 (25)
3 (50) 230 Vac
230 Vac Sekoflex
Sekoflex
NPE
NPE 00
00 28
1H A
A 2
3 0,1 (1,5)
0,1 (1,5) 28 (467)
1,5 (25) 100÷240 Vac
230 Vac Sekobrill
Sekoflex
NPE
NPE 03
00 0H
28 A
A 2
2 3 (45)
0,1 (1,5) 0,4
28 (6,66)
(467) 230 VacVac
100÷240 Sekobrill
Sekobrill
NPE
NPE 1H
03 1H
0H A
A 1
2 1,5 (22)
3 (45) 1,5(6,66)
0,4 (25) 230 Vac
230 Vac Santoprene
Sekobrill
NPE 1H 1H A 1 1,5 (22) 1,5 (25) 230 Vac Santoprene
NPR
NPR
Models
Models
NPR with with Flow
Flow Rate
Rate Adjustable
Adjustable through
through a potentiometer
a potentiometer fromfrom 12%
12% to to 100%
100%
2 Rollers.
2 Rollers.
Models with Flow Rate Adjustable through a potentiometer from 12% to 100%
Motors:
Motors: Brushed
Brushed
2 Rollers. DC DC motors.
motors.
Max
Max Flow
Flow Rates:
Rates: from
from 0,5 0,5
Motors: Brushed DC motors. l/hto
l/h up up30tol/h.
30 l/h.
Tubes: Santoprene,
Tubes: Santoprene,Sekobrill, Sekoflex
Sekobrill, (other
Sekoflex materials
(other on request).
materials on request).
Max Flow Rates: from 0,5 l/h up to 30 l/h.
Power Supply: 100-240 Vac 50/60 Hz, 230 Vac 50/60 Hz, 24 Vac, 24 V DC
Tubes: Santoprene, Sekobrill,
CODE Sekoflex (other materials on request). VALUES
Back CODERate Power Back Pressure Flow Rate
VALUES
Family Flow Tube Power Supply Tube Material
Pressure
Back Supply
Power barPressure
Back (psi) l/h (ml/min)
Flow Rate
Family
NPR 00 Flow04Rate A Tube
1 0,1 (1,5) Power
230 Supply Tube Material
Pressure Supply bar (psi) l/h4(ml/min)
(66,7) Vac Santoprene
NPR
NPR 00
00 04
04 MA 3
1 0,1 (1,5)
0,1 (1,5) 4 (66,7)
4 (66,7) 100÷240
230 VacVac Santoprene
Sekoflex
NPR
NPR 00
00 07
04 M
M 3
3 0,1 (1,5)
0,1 (1,5) 7 (116,7)
4 (66,7) 100÷240 Vac
100÷240 Vac Sekoflex
Sekoflex
NPR
NPR 00
00 18
07 M
M 1
3 0,1 (1,5)
0,1 (1,5) 28 (467)
7 (116,7) 100÷240 Vac
100÷240 Vac Santoprene
Sekoflex
NPR
NPR 00
00 30
18 M
M 1
1 0,1 (1,5)
0,1 (1,5) 30 (500)
28 (467) 100÷240 Vac Santoprene
100÷240 Vac Santoprene
NPR
NPR 03
00 01
30 MA 2
1 3 (45)
0,1 (1,5) 1 (16,7)
30 (500) 230 VacVac Santoprene
100÷240 Sekobrill
NPR
NPR 03
03 01
01 MA 2
2 3 (45)
3 (45) 1 (16,7)
1 (16,7) 100÷240 Vac
230 Vac Sekobrill
Sekobrill
NPR
NPR 0H
03 0H
01 M
M 2
2 0,5 (7,5)
3 (45) 0,5 (8,8)
1 (16,7) 100÷240 Vac
100÷240 Vac Sekobrill
Sekobrill
NPR 0H 0H M 2 0,5 (7,5) 0,5 (8,8) 100÷240 Vac Sekobrill
Power Supply: 100-240 Vac 50/60 Hz, 230 Vac 50/60 Hz, 24 Vac, 24 V DC
Power Supply: 100-240 Vac 50/60 Hz, 230 Vac 50/60 Hz, 24 Vac, 24 V DC
103
109
128
134
128
134
1, 2, 3, 4 Family, Function
SKCK Dynamik Digital peristaltic pumps, Timed Dosing
SKCR Dynamik Digital peristaltic pumps, Conductivity Control Input
SKFK Dynamik Digital peristaltic pumps, micro dosing with speed regulation
SKLR Dynamik Digital peristaltic pumps, Timed dosing with external trigger
SKPH Dynamik Digital peristaltic pumps, pH control Input
SKRX Dynamik Digital peristaltic pumps, Redox control Input
5, 6 Back pressure
00 0,1 bar
1H 1,5 bar
03 3 bar
7, 8 Flow Rate
0H 0,4 l/h (6,6 ml/min)
1H 1,5 l/h (25 ml/min)
2H 2,5 l/h (41,6 ml/min)
01 1 l/h (16,7 ml/min)
04 4 l/h (67 ml/min)
07 7 l/h (116,7 ml/min)
10 10 l/h (166,6 ml/min)
15 15 l/h (250 ml/min)
9 Power Supply
A 230 Vac
B 24 Vac
D 24 VDC
M 100÷240 Vac
Z 24÷240 Vac
10 Membrane tubes
1 Santoprene
2 Sekobrill
3 Sekoflex
5 Sekoextra
6 Sekomed
11, 12, 13 Customization
000 No customization
NPE 00 1H A 3 000
Dynamik
Dynamik DigitalDigital
DynamikDigital Pumps Pumps
Pumps
AVAILABLE MODELS
AVAILABLE MODELS
SKCK
SKCK
SKCKwith Activation Time (A) and Pause Time (P) Adjustable by software.
Models
Models with Activation Time (A) and Pause Time (P) Adjustable by software.
Models
Switch withPriming
to select Activation Time
Mode (A) and
(MOM), RunPause
Mode Time
(ON)(P)orAdjustable
Stand By Mode by software.
(OFF).
Switch to select Priming Mode (MOM), Run Mode (ON) or Stand By Mode (OFF).
Switch
2 Rollers. to select Priming Mode (MOM), Run Mode (ON) or Stand By Mode (OFF).
2 Rollers.
2 Rollers.
Motors: Brushed DC motors.
Motors: Brushed DCDCmotors.
FlowMotors: Brushed
rate: different flow motors.
rates selectable by programming menu.
Flow rate: different flow rates selectable by programming menu.
Tubes: Santoprene, Sekobrill, rates
Flow rate: different flow selectable
Sekoextra (otherby programming
materials menu.
on request).
Tubes: Santoprene, Sekobrill, Sekoextra (other materials on request).
TheTubes:
pump Santoprene,
waits for a triggerSekobrill,
and Sekoextra
the display(other
showsmaterials on request).
“A_on” flashing. When the pump receives a trigger, it starts to dose
The
The
until pump
thepump
triggerwaits
waits for
is on foraatrigger and
triggerto
according and the
the setdisplay
the A and Pshows
display times;“A_on”
shows “A_on” flashing.
flashing.
if P is set to 0 the pump will run only for the Activation time and
When
then will the
When thepump
stop; pump receives
receivesaatrigger,
for example: trigger,ititstarts
starts to
to dose
dose until the trigger
until the trigger isison
onaccording
accordingtotothe
theset
setAAand
andP P
times;
times; if P
if is
P isset
settoto 00 the
thepump
pump
Power Supply: 100-240 Vac 50/60 Hz, 24 Vac. will
willrun
run only
only for
for the
the Activation
Activation time
time and
and then
then will
will stop;
stop; for
for example:
example:
CYCLIC
CYCLICDOSING
DOSING BATCHDOSING
BATCH DOSING
A=55and
A= andP=8
P=8 A=
A=55and
andP=0
P=0
CODE
CODE VALUES
VALUES
Back
Back Power Back Pressure Flow Rate
Family
Family Flow Rate Power Tube Back Pressure Flow Rate Power PowerSupply
SupplyTube
TubeMaterial
Pressure Supply Tube
Pressure Flow Rate Supply bar
bar (psi)
(psi) l/h
l/h(ml/min)
(ml/min)
Material
SKCK
SKCK 1H
1H 1H
1H MM 55 1,5
1,5 (22)
(22) 1,2
1,2(20)
(20) 100÷240
100÷240Vac
Vac Sekoextra
Sekoextra
SKCK
SKCK 1H
1H 40
40 MM 11 1,5 (22)
1,5 (22) 4 (66,7)
4 (66,7) 100÷240
100÷240 Vac Santoprene
Vac Santoprene
SKCK
SKCK 1H
1H 70
70 MM 11 1,5
1,5 (22)
(22) 77(116,7)
(116,7) 100÷240
100÷240Vac
Vac Santoprene
Santoprene
Power Supply: 100-240 Vac 50/60 Hz, 24 Vac.
Power Supply: 100-240 Vac 50/60 Hz, 24 Vac.
SKCR
SKCR
SKCR
Models with dosage depending on detected conductivity.
Models
Models withwith dosage depending on detected conductivity.
Switch todosage depending
select Priming Mode on(MOM),
detected conductivity.
Run Mode (ON) or Stand By Mode (OFF).
Switch
Switch to to select
select
2 Rollers. Priming
Priming ModeMode (MOM),
(MOM), Run Run
Mode Mode
(ON) (ON) or Stand
or Stand By ModeBy Mode
(OFF). (OFF).
2 Power
Rollers.Supply: 100÷240 Vac 50/60 Hz, 24 Vac 50/60 Hz upon request.
2 Rollers.
Power
Power Supply:
Supply:
Optional 100÷240
100÷240
Level Control Vac
VacInput.
50/60 50/60 Hz,Vac
Hz, 24 2450/60
Vac 50/60 Hz upon
Hz upon request.request.
Optional
Optional Level
Level Control
Control Input.
Input.
OFA Alarm buzzer (optional level) and signals on Set Point.
OFA
OFA Alarm
Alarm
Reading buzzer
buzzer
Range 0.2(optional
(optional
mS - 10 level)
level)
mS and and
with signals
signals
+/-10% on Point.
Set Point.
on tolerance.
Set
Reading
Reading Range
Range 0.20.2
mS mS
Motors: Brushed DC motors.- 10- 10
mS mS
with with
+/-10%+/-10% tolerance.
tolerance.
Motors:
FlowBrushed
Motors: Brushed
rate: DC DCmotors.
different motors.
flow rates selectable by programming menu.
Flow
Flowrate:
Tubes: different
rate: flow
different
Sekoflex, ratesrates
flow
Sekobrill, selectable by
selectable
Sekoextra programming
materialsmenu.
by programming
(other menu.
on request).
Tubes:
Tubes:Sekoflex,
Sekoflex,Sekobrill, Sekoextra
Sekobrill, (other
Sekoextra materials
(other on request).
materials on request).
The pump doses at maximum speed (100%) if the reading is at least 10 SU less than Set Point (1 SU = 0.098 mS)
The
Thepump
pump doses at maximum speed (100%) if theif reading is at least 10 SU10 less than
lessSet Point (1Point
SU =(10.098=mS) WhenmS)the
When thedoses at maximum
conductivity value isspeed (100%)
exceeded, the the
SKCRreading
graduallyis atreduces
least itsSUspeed than
until itSet
stops near SU 0.098
the Set Point.
conductivity value is exceeded, the SKCR gradually reduces its speed until it stops near the Set Point.
When the conductivity value is exceeded, the SKCR gradually reduces its speed until it stops near the Set Point.
CODE VALUES
Back CODE Power Back Pressure Flow RateVALUES
Family Flow Rate Tube Power Supply Tube Material
Back
Pressure Power
Supply Back barPressure
(psi) l/hFlow Rate
(ml/min)
Family Flow Rate Tube Power Supply Tube Material
SKCR Pressure 00 07 Supply
M 3 bar (psi)
0,1 (1,5) l/h (ml/min) 100÷240 Vac
7 (116,7) Sekoflex
SKCR
SKCR 0000 07
10 MM 3 (1,5)
0,1 (1,5) 7 (116,7)
10 (66,7) 100÷240Vac
100÷240 Sekoflex
Vac Sekoflex
SKCR 00 10 M 3 0,1 (1,5) 10 (66,7) 100÷240 Vac Sekoflex
Innovation > Technology > Future
Innovation > Technology > Future
18 Peristaltic Pumps
Dynamik Digital Pumps
Dynamik Digital Pumps
Dynamik Digital Pumps
SKFK
Models with adjustable speed, expressly realized for micro dosage of essences in SPA and Pools.
3 positions Switch to select Priming Mode (MOM), Run Mode (ON) or Stand By Mode (OFF).
SKFK
SKFK
2 Rollers.
Models
Models with adjustable speed, expressly realized for micro dosage of essences in SPA and Pools.
Powerwith adjustable
Supply: 100÷240speed,
Vacexpressly
50/60 Hz.realized for micro dosage of essences in SPA and Pools.
3 positions
3 Flow
positions Switch to select Priming Mode (MOM), Run Mode (ON) or Stand By Mode (OFF).
ratesSwitch
from to
2,5select
ml/hPriming Mode
up to 9,7 l/h. (MOM), Run Mode (ON) or Stand By Mode (OFF).
2 Rollers.
2 Level
Rollers.Control Input.
Power
Power Supply:
Supply: 100÷240
100÷240 VacVac 50/60
50/60 Hz. Hz.
External trigger 20÷240 Vac (Non Stop Dosage when the Trigger is ON).
Flow rates from 2,5 ml/h up to 9,7 l/h. l/h.
Flow rates from 2,5 ml/h up to 9,7
Motors: Brushed DC motors.
Level
Level Control
Control Input.
Input.
Tubes: Santoprene, Sekoflex, Sekobrill (other materials on request).
External trigger 20÷240
External trigger 20÷240 VacVac
(Non(Non
StopStop Dosage
Dosage whenwhen the Trigger
the Trigger is ON).
is ON).
Motors: Brushed DC
Motors: Brushed DC motors. motors.
CODE VALUES
Tubes:
Tubes: Santoprene,
Santoprene, Sekoflex,
Sekoflex, Sekobrill
Sekobrill (other(other materials
materials on request).
on request).
Back Power Back Pressure Flow Rate
Family Flow Rate Tube Power Supply Tube Material
Pressure CODE Supply bar (psi) l/h (ml/min) VALUES
SKFK 1H
Back 01 M
Power 1 Back1,5Pressure
(22) 0,025
Flow (0,42)
Rate 100÷240 Vac Santoprene
Family
SKFK 1H Flow 02Rate M Tube
1 1,5 (psi)
(22) 0,15 (2,5) Power
100÷240 Vac Tube
Supply Material
Santoprene
Pressure Supply bar l/h (ml/min)
SKFK
SKFK 1H
1H 03
01 M
M 1
1 1,5
1,5 (22)
(22) 1,5 (25)
0,025 (0,42) 100÷240
100÷240 Vac
Vac Santoprene
Santoprene
SKFK
SKFK 1H
1H 04
02 M
M 1
1 1,5 (22)
1,5 (22) 5,4 (90)
0,15 (2,5) 100÷240
100÷240 Vac Santoprene
Vac Santoprene
SKFK
SKFK 1H
1H 05
03 M
M 1
1 1,5 (22)
1,5 (22) 9,7 (161,7)
1,5 (25) 100÷240 Vac Santoprene
100÷240 Vac Santoprene
SKFK
SKFK 30
1H 05
04 M
M 2
1 3 (45)
1,5 (22) 9,7
5,4(161,7)
(90) 100÷240
100÷240 Vac Sekobrill
Vac Santoprene
SKFK 1H 05 M 1 1,5 (22) 9,7 (161,7) 100÷240 Vac Santoprene
SKFK 30 05 M 2 3 (45) 9,7 (161,7) 100÷240 Vac Sekobrill
SKLR
Models with adjustable dosing time, delay time and lockout time; originally created for laundry equipment,
they can be used also in any other application where a trigger input is available.
SKLR
3 positions Switch to select Priming Mode (MOM), Run Mode (ON) or Stand By Mode (OFF)
SKLR
Models with adjustable dosing time, delay time and lockout time; originally created for laundry equipment,
2 Rollers.
they can
Models withbeadjustable
used alsodosingin any time,
otherdelay
application
time and where a trigger
lockout input is available.
time; originally created for laundry equipment, they can be
Power Supply: 100÷240 Vac 50/60 Hz or 24 Vac 50/60 Hz upon request.
3 positions Switch to select Priming Mode (MOM), Run
used also in any other application where a trigger input is available. Mode (ON) or Stand By Mode (OFF)
Max Flow rate: 15 l/h
32 Rollers.Switch to select Priming Mode (MOM), Run Mode (ON) or Stand By Mode (OFF)
positions
Optional Level Control Input.
2 Power
Rollers. Supply: 100÷240 Vac 50/60 Hz or 24 Vac 50/60 Hz upon request.
External trigger 20÷240 Vac .
Max Flow
Power Supply: rate: 15 l/hVac 50/60 Hz or 24 Vac 50/60 Hz upon request.
100÷240
Motors:
Max Brushed
Flow rate: l/hDC
15Control motors.Level Control Input. External trigger 20÷240 Vac .
Optional
Optional Level Input.
Tubes:
Motors: Sekoflex,
Brushed Sekobrill (other materials on request).
External triggerDC motors.Vac
20÷240 .
Tubes: Sekoflex,
Motors: BrushedSekobrill (other materials on request).
DC motors.
Fixed
Fixed Filter
Filter timetime (5programmable
s), programmable
(5 s),Sekobrill delaydelay
time ontime (0-999
(0-999 seconds),
seconds), dosing
dosing time timeseconds),
(0-999 (0-999 seconds), lock-out
lock-out time (0-999time
minutes).
Tubes: Sekoflex, (other materials request).
(0-999 minutes).
The pump does not dose during the lock-out time, even if it receives another signal on the signal cable.
The pump does not dose during the lock-out time, even if it receives another signal on the signal cable.
Fixed Filter time (5 s), programmable delay time (0-999 seconds), dosing time (0-999 seconds), lock-out time
(0-999 minutes). CODE VALUES
The pump does Backnot dose during the lock-out time, even
Power BackifPressure
it receives another
Flow Ratesignal on the signal cable.
Family Flow Rate Tube Power Supply Tube Material
Pressure CODE Supply bar (psi) l/h (ml/min) VALUES
SKLR 00
Back 15 M
Power 2 0,1Pressure
Back (1,5) 15 (250)
Flow Rate 100÷240 Vac Sekobrill
Family
SKLR 00 Flow15Rate M Tube
3 0,1 (1,5) 15 (250) Power
100÷240Supply
Vac Tube Material
Sekoflex
Pressure Supply bar (psi) l/h (ml/min)
SKLR 00 15 M 2 0,1 (1,5) 15 (250) 100÷240 Vac Sekobrill
SKLR 00 15 M 3 0,1 (1,5) 15 (250) 100÷240 Vac Sekoflex
SKRX
SKRX
Models with dosage depending on measured Rx value, created for use in Swimming Pools.
Models with dosage depending on measured Rx value, created for use in Swimming Pools.
Dosage method ON-OFF ( Set Point adjustable).
Dosage method ON-OFF ( Set Point adjustable).
3 positions Switch to select Priming Mode (MOM), Run Mode (ON) or Stand By Mode (OFF).
3 positions Switch to select Priming Mode (MOM), Run Mode (ON) or Stand By Mode (OFF).
Bnc connection for ORP probe.
Bnc connection for ORP probe.
Measure
Measure Range
Range ORP:
ORP: 600÷1000
600÷1000 mV (resolution:
mV (resolution: 10 mV).
10 mV).
Calibration method: ORP 1 Point (740 mV set point by default).
Calibration method: ORP 1 Point (740 mV set point by default).
Power Supply: 90÷265 Vac
Power Supply: 90÷265 Vac 50/60 Hz.50/60 Hz.
Flow
Flow rate:
rate: 1,51,5
l/h.l/h.
Motors: Brushed DC motors.
Motors: Brushed DC motors.
Tubes: Santoprene (other materials on request).
Tubes: Santoprene
2 Rollers in Bronze filled(other
PTFE materials
suitable toon request).pool application.
swimming
2 Rollers in Bronze filled PTFE suitable to swimming pool application.
CODE VALUES
Back Power Back Pressure Flow Rate
Family Flow Rate Tube Power Supply Tube Material
Pressure Supply bar (psi) l/h (ml/min)
SKRX 0H 1H M 1 0,5 (7,5) 1,5 (25) 100÷240 Vac Santoprene
SKRX 1H 1H M 1 1,5 (22,5) 1,5 (25) 100÷240 Vac Santoprene
DIMENSIONAL DRAWING
DIMENSIONAL DRAWING
KronosKronos
20 Digital 10 Digital
Pumps Pumps
Kronos 20 Digital Pumps
Family of Pumps with the following General Features:
Family of Pumps withinterface
< Digital the following Generaldisplay.
with 7 segments Features:
< IP65 protection degree with a square and technical
Family ofwith
Pumpsxwith the following General Features:
Digital interface
enclosure in2PP 8with
Characters
fiber glass. LCD Display with backlight
IP65 protection degree with a square andwall
technical enclosure in
Digitalexternal
< Both interface eyelets
with 2forx 8direct
Characters fixing and
LCD Display with backlight
PP with fiber glass.
brackets with “snap
IP65 protection in” feature.
degree with a square and technical enclosure in
Both externalPPeyelets
< Snap forglass.
in transparent
with fiber direct wallcover.
frontal fixing and brackets with
“snap in”< Always
feature.
Both external eyelets
three rollers, for for
a moredirect wall fixing
constant dosingand brackets with
and
Snap in transparent
“snap
an in”frontal
extended feature. cover.
tube life.
Always three rollers,
Snap
< Wheels for always
inholder a more
transparent constant
frontal
mounted on adosage
cover. and to
ball bearing, an
extended tubeAlways three rollers, for a more
life.longer life of the whole pump.
ensure constant dosage and an
Wheels holderextended
alwaystube
< Optionally life. with
mounted
equipped onPTFEa ball bearing,
Bronze to ensure
filled rollers
Wheels
for holder always mounted on a ball bearing,
in to ensure
longer life of the whole
special pump. such
applications as Chlorine Dosage
longer life
swimming with of the whole pump.
pools.PTFE Bronze filled rollers for special
Optionally equipped
Optionally equipped with PTFE Bronze filled rollers for special
< DC Motors
applicationsapplications with extended
such as Chlorine lifetime.swimming pools.
such asDosage
ChlorineinDosage in swimming pools.
equipped with ModBus
DC Motors with extended
< Optionally
DC Motors with lifetime,
extended lifetime,connection
available for
with encoders
available with on on
encoders
remote
board, for better control.
dosing accuracy.
board, for better dosing accuracy.
OptionallyApplications:
equipped
Optionallywith ModBus
equipped with connection for remote
ModBus connection for remote
control.
control. General Purpose Intermediate Range pump for low-
medium duty applications.
MAIN APPLICATIONS: Intermediate Range pump for medium duty
MAIN APPLICATIONS: Intermediate Range pump for medium duty
applications
applications
DIMENSIONAL DRAWING
DIMENSIONAL DRAWING
23
KXCR 00 07 M 1 0 00
AVAILABLE MODELS
KXCR
KXCR AVAILABLE MODELS
Models
Models with
with Conductivity
Conductivity control
control InputInput
andand proportional
proportional reaching
reaching of set
of the thepoint
set point
(100%(100%
until until
80% of80%
theofset
thepoint and
KXCR
setwith
20% point and 20%
speed with decreasing).
gradually speed gradually decreasing).
Models
Equippedwith
Equipped withConductivity
with conductive
conductive control
probe
probe Input
(200 (200 and
μS –µS proportional
15–mS).
15 mS). reaching of the set point (100% until 80% of the
setON/OFF
ON/OFF Switch
point Switch
and 20%andand
with Priming
speed
Priming Function.
gradually decreasing).
Function.
3 Rollers.
3 Rollers.
Equipped with conductive probe (200 µS – 15 mS).
ON/OFF Switch100÷240
Power
PowerSupply:
Supply: 100÷240
and VacVac
Priming 50/60 Hz. Hz.
50/60
Function.
Motors:
Motors:
3 Rollers.Brushed
Brushed DC motors.
DC motors.
Max
Max
Power Flow
Flowrate:
Supply: 7100÷240
rate: l/h, adjustable
7 l/h, in the
adjustable
Vac 50/60 range
inHz. 16%÷100%.
the range 16%÷100%.
Tubes: Santoprene
Tubes: Santoprene (other materials
(other on request).
materials on request).
Motors: Brushed DC motors.
KXDR
MaxKXDR
Flow rate: 7 l/h, adjustable in the range 16%÷100%.
Models
Models
Tubes: with
with possibility
possibility
Santoprene ofmaterials
of speed
(other speed regulation
regulation and and trigger
trigger
on request). inputinput signal.
signal.
ON/OFF
ON/OFF
KXDR switch
switch and and priming
priming function.
function.
Models with possibility of speed regulation and trigger input signal.
CODE VALUES
ON/OFF switchBack
and priming function. Power Back Pressure Flow Rate
Family Flow Rate Tube Power Supply Tube Material
Pressure Supply bar (psi) l/h (ml/min)
CODE VALUES
KXCR 00 07 M 1 0,1 (15) 7 (116,7) 100÷240 Vac Santoprene
Back Power Back Pressure Flow Rate
Family
KXDR 00 Flow Rate
07 M Tube
1 0,1 (15) 7(116,7) Power Supply
100÷240 Tube Material
Vac Santoprene
Pressure Supply bar (psi) l/h (ml/min)
KXCR 00 07 M 1 0,1 (15) 7 (116,7) 100÷240 Vac Santoprene
KXDR 00 07 M 1 0,1 (15) 7(116,7) 100÷240 Vac > Technology
Innovation Santoprene> Future
24 Peristaltic Pumps
Kronos
Kronos 20 Digital20 Digital
Pumps
Kronos 20 Digital Pumps
Pumps
Family of Pumps with the following General Features:
Family of Pumps with the following General Features:
< Digital interface with 2 x 8 Characters LCD Display
Familywithofbacklight
Pumps with the following General Features:
Digital interface with 2 x 8 Characters LCD Display with backlight
< IP65 protection degree with a square and technical
IP65 protection degree
enclosure in PP with
with a square and technical enclosure in
Digital interface withfiber
2 x glass.
8 Characters LCD Display with backlight
PP with< Both
fiber
IP65glass.
protection degreefor
external eyelets with a square
direct wall and
fixingtechnical
and enclosure in
Both externalPP eyelets
with
brackets withfor
fiber glass.
“snap direct wall fixing and brackets with
in” feature.
“snap in” feature.
Both external
< Snap eyelets
in transparent for direct
frontal cover. wall fixing and brackets with
Snap in transparent
“snap in” frontal cover.
feature.
< Always three rollers, for a more constant dosage and
Alwaysthree Snap rollers, for
in transparent
an extended tube a more constant
life.frontal cover. dosage and an
extended tube life.
Always three rollers, for a more constant dosage and an
< Wheels holder always mounted on a ball bearing, to
Wheels holder always
extended
ensure longertubemounted
life.
life on a ball
of the whole bearing, to ensure
pump.
longer life Wheels
of the holder pump.
whole always mounted on a ball bearing, to ensure
< Optionally equipped with PTFE Bronze filled rollers
Optionallylonger life ofwith
equipped
for
the PTFE
special applications
wholeBronze
pump. filled rollers for special
such as Chlorine Dosage in
applications Optionally equipped
such as pools.
Chlorine Dosage with PTFE inBronze
swimmingfilledpools.
rollers for special
swimming
DC Motors applications
with extendedsuch as Chlorine Dosage
lifetime, lifetime,
available in swimming
with encoders pools.
on
< DC Motors with extended available with
board, forDC Motors with extended lifetime, available with encoders on
better
encoders dosing
on board,accuracy.
for better dosing accuracy.
board, for better dosing accuracy.
Optionally equippedequipped
with ModBus with connection for remote
< Optionally
Optionally equipped with ModBus
ModBusconnection
connectionfor for remote
control. control.
remote control.
Applications:
MAIN APPLICATIONS: Intermediate Range pump
MAIN APPLICATIONS: Intermediate Rangefor
pumpmedium duty duty
for medium
Intermediate
applications
applications Range pump for medium duty applications
DIMENSIONAL DRAWING
DIMENSIONAL DRAWING
25
Kronos 20
Kronos 20 DigitalDigital
Pumps
Kronos 20 Digital Pumps
Pumps
KEY CODE
1, 2, 3, 4 Family, Function
KEY CODE
KTDR Kronos 20 Digital, Constant Dosage with Speed Regulation
1, 2, 3, 4 Family, Function
KTCR Kronos 20 Digital, Conductivity Control Input
KTDR 5, 6 Back pressure Digital, Constant Dosage with Speed Regulation
Kronos 20
KTCR 00 Kronos 20 Digital, Conductivity
0,1 barControl Input
5, 603 Back pressure 3 bar
00 7, 8 Flow Rate 0,1 bar
03 01 13 l/h
bar(16,7 ml/min)
07
7, 8 Flow Rate 7 l/h (116,7 ml/min)
0110 10 l/h (166,7ml/min)
1 l/h (16,7 ml/min)
07 9 Power Supply7 l/h (116,7 ml/min)
10 M 10 l/h (166,7100÷240 Vac
ml/min)
10 Membrane tubes
9 Power Supply
1 Santoprene
M 100÷240 Vac
5 Sekoextra
10 Membrane tubes
6 Sekomed
1 Santoprene
11 Communication
5 Sekoextra
0 No Communication
6 I Sekomed
Isolated ModBus
11
M Communication
Not Isolated ModBus
0 12, 13No Communication
Customization
I 00 Isolated
No ModBus
customization
M Not Isolated ModBus
12, 13 Customization
KTCR 00 10 M 1 0 00
00 No customization
AVAILABLE MODELS
KTCR 00 10 M 1 0 00
KTCR
KTCR
Models with Conductivity control Input and proportional reaching of the set point (*)
AVAILABLE MODELS
Equipped
Models with with conductive
Conductivity probe
control Input(200andµSproportional
– 15 mS). reaching of the set point (*)
ON/OFFwith
Equipped
KTCR Switch and Priming
conductive probe Function.
(200 μS – 15 mS).
3 Rollers.
ON/OFF Switch and Priming Function.
Models with Conductivity control Input and proportional reaching of the set point (*)
Power Supply: 100÷240 Vac 50/60 Hz.
3 Rollers.
Equipped with conductive probe (200 µS – 15 mS).
Motors:
Power Brushed
Supply: DC motors.
100÷240 Vac 50/60 Hz. Motors: Brushed DC motors.
ON/OFF
Max Flow
Switch
rate:
and Priming
10 l/h, adjustable
Function.
in theinrange 16%÷100%
Max Flow rate: 10 l/h, adjustable the range 16%÷100%
3 Tubes:
Rollers.Santoprene (other materials can be supplied upon request).
Tubes: Santoprene (other materials can be supplied upon request).
Power
(*)TheSupply: 100÷240
conductivity pumpVac 50/60 Hz.
is intended to dose until the conductivity in the recipient where the pump is dosing reaches
a programmed set point. The ispump
(*)The
Motors: conductivity
Brushed DC pump
motors. intended to doseequipped
is therefore until thewith conductivity in the
a conductive recipient
probe with awhere the
built-in pump is probe to
temperature
Max dosing reaches
Flow rate:
compensate its10 a programmed set point.
l/h, adjustable in the range 16%÷100%
readings. The pump is therefore equipped with a conductive probe with a
built-in
Tubes: temperature
Santoprene
A Proportional Band(other probe to
materials
(like 80%-20% compensate
or can its readings.
be supplied
50%-50%) can be upon request).
programmed in the menu of the pump: the pump will dose at its
A Proportional
maximum flow rateBand
until(like 80%-20%
reaching or 50%-50%)
the first programmed can be programmed
percentage of theinset
thepoint,
menu toof thelinearly
then pump: decrease
the pumpits speed
(*)The
will conductivity
dose at its pump isflow
maximum intended
rate to dose
until untilthe
reaching thefirst
conductivity
programmed in the recipient of
percentage where
the thepoint,
set pump toisthen
down to 0% when the set point is reached, in order to avoid over dosage.
dosing reaches
linearly a programmed
decrease its speed down set point.
to 0% Thewhen pump is therefore
the set equipped
point is reached, with atoconductive
in order probe with a
avoid over dosage.
KTDR
built-in
KTDRtemperature probe to compensate its readings.
A Models
Models with
Proportionalwithpossibility
Band of speed
(like
possibility 80%-20%
of speedregulation and and
or 50%-50%)
regulation trigger
can input signal.
be programmed
trigger input signal. in the menu of the pump: the pump
Max Flow rate: 7 l/h, adjustable in the range 16%÷100%.
willMax
doseFlow
at itsrate:
maximum flow rate until reaching
7 l/h, adjustable in the range 16%÷100%. the first programmed percentage of the set point, to then
linearly decrease its speed down to 0% when the set point is reached, in order to avoid over dosage.
CODE VALUES
KTDR
Back Power Back Pressure Flow Rate
ModelsFamily
with possibility of FlowspeedRateregulation andTube trigger input signal. Power Supply Tube Material
Pressure Supply bar (psi) l/h (ml/min)
Max Flow rate: 7 l/h, adjustable in the range 16%÷100%.
KTCR 00 10 M 1 0,1 (15) 10 (166,7) 100÷240 Vac Santoprene
KTDR 00 CODE07 M 1 0,1 (15) 7 (116,7)VALUES 100÷240 Vac Santoprene
Back Power Back Pressure Flow Rate
Family Flow Rate Tube Power Supply >Tube
Innovation Material
Technology > Future
Pressure Supply bar (psi) l/h (ml/min)
KTCR 00 10 M 1 0,1 (15) 10 (166,7) 100÷240 Vac Santoprene
26 Peristaltic Pumps
KRFM 02 10 M 1 0 00
CODE VALUES
Back Power Back Pressure Flow Rate
Family Flow Rate Tube Power Supply Tube Material
Pressure Supply bar (psi) l/h (ml/min)
KRIR 02 10 M 6 2 bar 10 (166,7) 100÷240 Vac Sekomed
KRCR
Kronos CR pump has a accurate dosing adjustment, either manually or externally by means of the conductivity
probe signal:
KRCR
Kronos CR pump hasCond Modedosing
a accurate The pump doses
adjustment, proportionally
either to a signalbyofmeans
manually or externally 0.10 –of14.99 mS. It’s possible
the conductivity probe to
signal:
set the mS Set Point corresponding to 0% dosing (desired conductivity).
Cond Mode - The pump doses proportionally to a signal of 0.10 – 14.99 mS. It’s possible to set the mS Set Point The pump doses
corresponding to@100%
KRCR 0% dosing if conductivity is lower than
(desired conductivity). a programmable
The pump doses @100%Set Point percent
if conductivity (default
is lower than 80%).
a programmable
Set Point
Kronos percent
CR pump If
has mS value
(default
a accurate is higher
80%).dosing than
If mS value fixed percentage,
is highereither
adjustment, than fixedthe pump proportionally
percentage,
manually the pump
or externally decreases
of thethe
proportionally
by means speed the
decreases
conductivity
speedsignal:
probe down to 0% (at the
down to 0% (at the programmed Set Point). programmed Set Point).
Infinite
Infinite adjustment
adjustment of the
ofCond
the metering
metering
Mode Theoutput
output either
pump either manually
manually
doses or externally
or externally
proportionally to via viaof
0/4-20
a signal 0/4-20
mA –mA
signals.
0.10 signals.
14.99 mS. It’s possible to
Priming
Priming function
function (full
(full speed).
speed).
set the mS Set Point corresponding to 0% dosing (desired conductivity). The pump doses
Reversible
Reversible direction.
direction. @100% if conductivity is lower than a programmable Set Point percent (default 80%).
Tube
Tube breakage
breakage detection
detection
If mSsystem system
value integrated.
isintegrated.
higher than fixed percentage, the pump proportionally decreases the speed
Over
Over Flow
Flow Alarm
Alarm function
function available.
available.
down to 0% (at the programmed Set Point).
Temperature
Temperature probe
probe
Infinite adjustment compensation.
compensation.
of the metering output either manually or externally via 0/4-20 mA signals.
Flow
Flow rates: 0,010
rates: ÷ 10÷ l/h
0,010 10 @l/h2bar.
@ 2bar.
Priming function (full speed).
Tubes:
Tubes: Sekomed
Sekomed (others
(otherson onrequest).
request).
Reversible direction.
Tube breakage detection CODE system integrated. VALUES
Over Flow Alarm function available.
Back Power Back Pressure Flow Rate
Family
Temperature Flow Rate
probe compensation. Tube Power Supply Tube Material
Pressure Supply bar (psi) l/h (ml/min)
Flow rates: 0,010 ÷ 10 l/h @ 2bar.
KRCR 02 10 M 6 2 bar 10 (166,7) 100÷240 Vac Sekomed
Tubes: Sekomed (others on request).
CODE VALUES
Back Power Back Pressure Flow Rate
Family Flow Rate Tube Power Supply Tube Material
Pressure Supply bar (psi) l/h (ml/min)
KRCR 02 10 M 6 2 bar 10 (166,7) 100÷240 Vac Sekomed
KKFM
Kronos
KKFM KK FM pump is a special version of Kronos 50 pump; it has the six different following configurations:
KKFM
Kronos KK FM pump Manual Mode version
is a special Constant dosage
of Kronos 50(with
pump; possibility
it has thetosixinsert a ON,following
different OFF and configurations:
delay time);
Kronos KK FM pump mA is a special
Mode
Manual Modeversion
Dosage of Kronos
Constant 50 pump;
Proportional
dosage to it(0)has
(with the mA
4÷20 six different
possibility or insertfollowing
to 20÷4(0) configurations:
mA analogic
a ON, OFF and signal;
delay time);
Manual Mode - Constant
PPM
mA Mode dosage
Mode (with possibility
Dosage
Dosage amount to insert
to (0)a ON,
calculated
Proportional OFFmAand
to maintain
4÷20 delay time);
the selected
or 20÷4(0) Concentration
mA analogic signal; of
mA Mode - Dosage Proportional
chemical;
PPM Mode Dosageto (0) 4÷20 mA orcalculated
amount 20÷4(0) mA to Analogue
maintain thesignal;
selected Concentration of
PPM Mode - Dosage 1:N amount
Mode
chemical; calculated
Pump to
doses maintain
followingthe selected
the pulses Concentration
number to theofrelated
chemical;
input. One input pulse
1:N Mode - Pumpgenerates
doses
1:N Mode 1following
second the pulses
of dosing
Pump doses number to
at set speed
following the
the pulses related
% (N); input. One input pulse
number to the related input. generates
One input1 second
pulse of
dosing at set speed
N:1 % (N);
Mode
generates Pump doses
1 second following
of dosing the pulses
at set speed % (N);number to the related input. N input pulses
N:1 Mode - Pumpgenerate
doses following theofpulses number
at 1% to the related input. N input pulses generate 1 second of dosing
N:1 Mode1 second
Pump dosing
doses following ofthe
max speed;
pulses number to the related input. N input pulses
at 1% of max speed;
Batch
generateMode Pump
1 second doses the
of dosing selected
at 1% of maxquantity
speed; when UP button is pressed or when a
Batch Mode - Pump doses the selected quantity when UP button is pressed or when a pulse is read on input, within
pulse
Batch isMode
read onPump
input,doses
withinthe
theselected
selectedquantity
dosing time;
when UP button is pressed or when a
the selected dosing time;
Reversible direction.
pulse is read on input, within the selected dosing time;
Reversible direction.
Tube breakage
Reversible detection system integrated.
direction.
Tube breakage detection system integrated.
Flow
Tube rates: 2l/hdetection
breakage @ 2bar, 2system
l/h @6integrated.
bar , 8 l/h @3 bar, 4 l/h @4 bar.
Flow rates: 2l/h @ 2bar, 2 l/h @6 bar , 8 l/h @3 bar, 4 l/h @4 bar.
Tubes:
Flow Sekotech
rates: 2l/h (allows
@ 2bar, secure
2 l/h @6
Tubes: Sekotech (allows secure operationoperation in @3
bar ,in8harsh
l/h harsh conditions),
bar, 4 l/h Sekofort,
conditions), Sekofort,
@4 bar. Pharmapure.
Pharmapure.
Tubes: Sekotech (allows secure operation in harsh conditions), Sekofort, Pharmapure.
CODE VALUES
Back CODE Power Back Pressure Flow Rate VALUES
Family Flow Rate Tube Power Supply Tube Material
Pressure
Back Supply
Power barPressure
Back (psi) l/h (ml/min)
Flow Rate
Family Flow Rate Tube Power Supply Tube Material
KKFM Pressure
03 08 Supply
M 7 bar (psi)
3 bar l/h (ml/min)
8 l/h 100÷240 Vac Sekotech
KKFM 03
06 08
02 M 7 3 bar
6 8 l/h
2 100÷240 Vac Sekotech
KKFM 06
03 02 M 7
8 6 bar
3 2 l/h 100÷240 Vac Sekotech
Sekofort
KKFM 03
04 02
04 M A8 3 bar
4 2 l/h
4 100÷240 Vac Sekofort
Pharmapure
KKFM 04 04 M A 4 bar 4 l/h 100÷240 Vac Pharmapure
Innovation > Technology > Future
Innovation > Technology > Future
31
AVAILABLE MODELS
AVAILABLE MODELS
KSFM
KSFM
KSFM AVAILABLE MODELS
Six different
KSFM
SixSix different
different configuration
configuration
configuration modes:
modes:
modes:
Manual
Six
Manual
Manual Mode
different
Mode
Mode ,mA
mA Mode,
,configuration
Mode,
, mA PPM
PPM
Mode, Mode
modes:
Mode
PPM , 1:N
, 1:N
Mode Mode,
,Mode,
1:N N:1N:1
Mode, Mode,
Mode,
N:1 Batch
Batch
Mode, Mode.
Mode.
Batch Mode.
Integrated
Manual
Integrated
Integrated Tube
Mode
Tube
Tube ,breakage
mA
breakageMode,
breakage detection
PPM
detection system.
Mode ,
system.
detection 1:N Mode,
system. N:1 Mode, Batch Mode.
Flow
Flowrates:
Integrated
Flow rates: safely
Tube
safely
rates: safely up
up to25
to
up 25l/h
breakage
to l/h
25 @0,1
detection
@0,1
l/h bar.
bar.
@0,1 system.
bar.
Tubes:
Flow
Tubes:
Tubes: Sekoflex
rates:
Sekoflex
Sekoflex (other
safely
(other up tubes
to 25
tubes
(other tubescan
l/h be
@0,1
can can supplied
bar.
be supplied
be supplied upon
upon request).
request).
upon request).
Tubes: Sekoflex (other tubes
CODE can be supplied upon request). VALUES
CODE VALUES
Back CODE Pressure Flow Rate VALUES
Family Back Flow Rate Power Power Tube BackBack Pressure Flow Rate Power Supply Tube Material
Family PressureBack Flow RateSupplyPower Tube bar (psi)
Pressure l/hFlow
(ml/min) Power Supply Tube Material
Family Pressure Flow Rate Supply Tube Back bar (psi) Rate
l/h (ml/min) Power Supply Tube Material
KSFM Pressure
00 25 Supply
M 3 barbar
0,1 (psi) l/h(416,7)
25 (ml/min) 100÷240 Vac Sekoflex
KSFM 00 25 M 3 0,1 bar 25 (416,7) 100÷240 Vac Sekoflex
KSFM 00 25 M 3 0,1 bar 25 (416,7) 100÷240 Vac Sekoflex
Innovation > Technology > Future
Innovation > Technology > Future
Innovation > Technology > Future
Your Choice,
Our Commitment
In the modern Globalised world, being a privately
owned Company has significant benefits especially for
our Customers, our Partners. For over 40 years, SEKO
has developed a Global organisation able to take the
longer view, manage the pressure of the now, and to
plan for the long term, delivering true Partnership for
our Customers, with transparency and mutual respect
for each other.