You are on page 1of 20

PAVILLION EXECTIVE

BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS


SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
i) WATER SUPPLY PIPING

1 Providing, laying, fixing, testing and


disinfecting, polypropylene pipelines for cold
and hot water supply as per DIN 8077/8078
PN-20 for pipe and DIN 16962 PN-25 for
fittings or equivalent BS specification
Dadex (Polydex), Formul (Turkey), Firat
(Turkey) make as approved by the Engineer
Incharge complete in all respects to their
entire satisfaction, including specials such
as tee, cross, reducer, bend, union, elbow,
plug, socket etc., supported on walls or
suspended from slab or run in chases (chased in
walls shall be made by using electric cutter)
including supports, cutting and making good
the same as necessary to the structure
complete in all respects. (all hot and cold
water pipes shall run under the ceiling of
same floors, galvanized hangers and rawl bolts
shall be lndex, Sikla, Fisher or Hilti make
shall be used.)

i) 25 mm o/d RFT
ii) 32 mm o/d
RFT
iii) 40 mm o/d
RFT
iv) 50 mm o/d
RFT
v) 63 mm o/d
RFT
vi) 75 mm o/d
RFT
vii) 90 mm o/d
RFT
viii) 110 mm o/d
RFT
2 Providing, laying, fixing, testing and
disinfecting, GI pipelines for water supply with
flanged joints (water transfer and at roof) as
per BSS 1387 medium quality, IIL, as approved
by the Engineer Incharge complete in all
respects to their entire satisfaction, including
specials such as tee, cross, reducer, bend,
union, elbow, plug, socket etc., supported
on walls or suspended from slab including
painted MS horizontal and vertical pipe
hangers of approved design, supports,
cutting and making good the same as necessary
to the structure including two layers
of anticorrosive bitumen tape overlapped 6 mm
at edges to all buried pipes complete in all
respects.

i) 150 mm dia RFT

Habib Rafiq (Pvt.) Limited Page 1 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
ii) 100 mm dia
RFT

3 Providing, fixing and testing pressure


reducing valve assembly consisting of
pressure reducing valve with by-pass
arragements consisting of 3 # gate valve, 2 # ball
valve with 2 # pressure gauges, nipple,
reducer etc. Honeywell or Watts make as
approved including all acessories and jointing
material complete in all respects.

i) 2-1/2" i/d
Each
ii) 2" i/d
Each
iii) 1-1/2" i/d
Each
iv) 1-1/4" i/d
Each
v) 1" i/d
Each
vi) 3/4" i/d
Each

4 Providing, fixing and testing PPRC ball


valve Dadex (Polydex), Formul (Turkey), Firat
(Turkey) make or as approved by the Engineer
Incharge complete in all respects to their entire
satisfaction including all accessories and
jointing material complete in all respects.

i) 25 mm o/d
Each
ii) 32 mm o/d
Each
iii) 40 mm o/d
Each
iv) 50 mm o/d
Each
5 Providing and fixing Rubber based closecell
insulation Armaflex or equivalent make with
FM approved Class "O" with polymer based
aluminium cladding Armachek silver or equivalent
make around PPRC pipes at roof complete in all
respects.
i) 90 mm o/d
Rft
ii)110 mm o/d
Rft

6 Providing, fixing and testing heavy duty brass


ball / Gate valve (Upto 2" dia use Ball valve and
above 2" dia use gate vavle) Honeywell or
Watts make as approved by the Engineer
Incharge complete in all respects to their
entire satisfaction including all
accessories and jointing material complete in
all respects.

Habib Rafiq (Pvt.) Limited Page 2 of 20


6

PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.

i) 1-1/2" i/d Each


ii) 2" i/d
Each
iii) 2-1/2" i/d
Each
iv) 3" i/d
Each
v) 6" i/d
Each

7 Providing and fixing M.S. Puddle sleeves in


RCC slab, wall etc, before pouring of concrete
of specified size as per drawings and
specifications, complete in all respects.

a) 75 mm dia (3" dia)


Each
b) 100 mm dia (4" dia)
Each
c) 150 mm dia (6" dia)
Each
d) 200 mm dia (8" dia)
Each
e) 250 mm dia (10" dia)
Each

8 Providing and fixing Grey Cast Iron


manhole cover with rubber ring for water
tanks, sumps etc, of specified size and weight,
as per drawings and specifications, complete in all
respects.

a) 600 mm dia (70 Kg)


Each
b) 750 mm x 750 mm (95 kg)
Each
9 Providing, Installing, testing and
commissioning centrifugal pump (for water
transfer with positive suction) GRUNFOS, DAB
or KSB make with 3-phase electric motor
SIEMENS or equivalent make of requisite
horse power as per manufacturer's
recommendations having total discharge of
0.50 cusec and head 430 feet including all
necessary valves on suction and delivery side the
pump, belows, non return valves, electric
control panel, pressure gauges on suction and
delivery side of the pump, auto control level for Each
dual tank system (under ground and overhead
tank), all accessories and fittings complete in all
respects.(Electric control panel must be
capable of communicating with the building
BMS system through backnet)

Habib Rafiq (Pvt.) Limited Page 3 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
10 Providing, installing, testing and
commssioning water meter in corridors for each
apartment WATTS or equivalent make Each
complete in all respects.

11 Providing, installing, testing and


commissioning booster pump GRUNDFOS, DAB
or KSB make with 3-phase electric motor
(with VFD) SIEMENS or equivalent make of
requisite horse power mounted on base plate
having total discharge of 280 gpm (booster
pump consists of four pumps, first pump 70 gpm,
second 70 gpm, 70 gpm and fourth 70 gpm)
and head 100 feet including all necessary Each
valves, diaphragm tank, pressure switch,
control panel, pressure gauges and
manometers on suction and delivery side of
the pump, all accessories and fittings
complete in all respects. (Electric control
panel must be capable of communicating with
the building BMS system through backnet)

12 Providing, installing, testing and


commissioing R.O. plant having flow rate 100
gallon per minute, of approved make and Each
design complete in all respects.

ii) DRAINAGE SYSTEM PIPING

13 Providing, laying, fixing and testing


uPVC/PP soil, waste, vent and rain water
pipes as per BSS 4514 & 5255 or
equivalent BS specifications including
uPVC/PP fittings with rubber ring joints
(Silicon liquid to be used for rubber ring
jointing) Marley U.K. (by Dadex) or
OSTANDORF HT-SAFE Germany make as per
DIN 4102 (B1) and DIN EN 1451-1(by Tetraplast)
as approved by the Engineer Incharge
complete in all respects, including,
clamps, bends, tees, Y-tees, cowls, reducers,
clean out etc., embedded in floors and walls,
clamped to walls, suspended from slab,
painted MS horizontal and vertical pipe
hangers of approved design (hangers shall be
as per EN-14266/DIN 4109, GIA Italian
or equivalent make) making requisite no. of
holes and making good the same complete in all
respects. (all soil, waste and vent pipes shall
run under the ceiling of lower floors,
galvanized hangers and rawl bolts shall be
Fisher, Sikla or Hilti make shall be used.)

i) 2" Dia
Rft
ii) 3" dia
Rft

Habib Rafiq (Pvt.) Limited Page 4 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
iii) 4" dia
Rft
iv) 6" dia
Rft

14 Providing, laying, fixing and testing floor drain


(multifloor trap) UPVC best quality Marley U.K.
(by Dadex) or OSTANDORF HT-SAFE
Germany make as approved Engineer Each
Incharge complete in all respects to their entire
satisfaction.

15 Providing, laying, fixing and testing floor drain


(P-trap) UPVC best quality Marley
U.K. (by Dadex) or OSTANDORF HT-
SAFE Germany make as approved Each
Engineer Incharge complete in all respects to their
entire satisfaction.

16 Providing, laying, fixing and testing


stainless steel top grating with 50 mm long neck
with double groove with rubber ring best quality
local make Saghir & C0., Afzal brothers or
Each
JAWS make as approved Engineer Incharge
complete in all respects to their entire satisfaction.

17 Providing, laying, fixing and testing UPVC


Boss fitting for P-trap connection, Marley
U.K. (by Dadex) or OSTANDORF HT-
SAFE Germany make as approved Each
Engineer Incharge complete in all respects
to their entire satisfaction.

18 Provision of UPVC sleeves in slab before


pouring of concrete of specified size as per
drawings and specifications, complete in all
respects.
a) 75 mm dia
Each
b) 125 mm dia
Each
c) 200 mm dia
Each

19 Making holes in slab with core cutting


machine of specified size complete in all
respects.
a) 75 mm dia
Each
b) 125 mm dia
Each
c) 200 mm dia
Each

Habib Rafiq (Pvt.) Limited Page 5 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
20 Making the sleeves water proof with Sika or
equivalent water proof chemical as
approved, including testing of specified size
complete in all respects.
a) 75 mm dia
Each
b) 125 mm dia
Each
c) 200 mm dia
Each
21 Providing, Installing, testing and
commissioning submersible non clogging pump
for basement drainage sump best quality
Grundfos, DAB or KSB make, with motor of
requisite horse power, having discharge of
0.5 cusec and head 75 ft. including all
necessary valves, auto coupling, control
panel (panel must be capable of
communicating with the building management Each
system through backnet), automatic liquid
level controller, all accessories, valves and
fittings complete in all respects. For drainage
sump-1.

22 Providing, Installing, testing and


commissioning submersible non clogging pump
for basement drainage sump best quality
Grundfos, DAB or KSB make, with motor of
requisite horse power, having discharge of
0.5 cusec and head 75 ft. including all
necessary valves, auto coupling, control
panel (panel must be capable of
communicating with the building management Each
system through backnet), automatic liquid
level controller, all accessories, valves and
fittings complete in all respects. For rain water
sump.

23 Providing, laying, fixing, testing, UPVC


pipelines of specified Class as per BS 3505 & PS
3051:1991 specification Dadex or as approved
by the Engineer Incharge complete in all
respects to their entire satisfaction, including
specials such as tee, cross, reducer, bend,
union, elbow, plug, socket, hanger and clamps
Sikla, Fisher or Hilti make shall be used,
UPVC gate valves, non return valve etc.,
complete in all respects.

i) 100 mm dia Class "D"


Rft

Habib Rafiq (Pvt.) Limited Page 6 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.

iii) GAS PIPING

24 Providing, fixing, testing and


commissioning SCH - 20 M.S. seamless pipe
& fitting with argon welding for Gas supply
system complete with bends, tees, unions,
sockets, specials as required to complete in all
respects ready to operate as per schedule,
specification, drawings and as per instruction of
Consultant.

i) 3/4" i/d Rft 118,052.00


ii) 1" i/d
Rft 102,720.00

Habib Rafiq (Pvt.) Limited Page 7 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
25 Providing, Fixing, testing and
commissioning wall-mounting domestic gas leak
detector WATTS Model GSW, controlled
by microprocessor-based electronics, with
audible and illuminating alarm, for connection
to one or more normally closed solenoid
valves (GSAVR, GHAV, EV, EVO Series) or
normally open solenoid valves (MSV, MSVO
Series). Normal operating mode is
automatically restored when the concentration of
gas falls below the alarm threshold. Supply Each 321.00
voltage: 230V-50Hz. Input power: max. 3 W.
Relay contact rating (resistive): 5A-
250V. Monitors the following gases: (MET
version) methane, natural gas - (LPG
version) propane, butane, LPG. Trip
threshold: 1st threshold = 10% LEL (Lower
Explosion Limit), including all accessories and
fittings, vavles etc., complete in all respects.

i) FITTINGS AND FIXTURES

Habib Rafiq (Pvt.) Limited Page 8 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
26 Providing, Fixing and testing European type
wall hung water closet of approved color with
intergal trap in vitreous china best quality
Porta make with concealed flush tank Grohe
or Kariba as approved by the Engineer
Incharge complete in all respects to their entire
satisfaction, including all accessories and
fittings Grohe or General fitting Italy make,
waste and trap, double seat and cover, tee Each 63.00
stop cock with wall cups, PVC flexible pipe
connection, all joints to services and drains,
plugging and screwing as required for the
structure complete in all respects.

27 Providing, Fixing and testing European type


water closet of approved color with intergal trap in
vitreous china best quality Porta make with
coupled flush tank as approved by the Engineer
Incharge complete in all respects to their
entire satisfaction, including all accessories and
fittings Grohe or General fitting Italy make,
waste and trap, double seat and cover, tee stop Each 565.00
cock with wall cups, PVC flexible
pipe connection, all joints to services and drains,
plugging and screwing as required for the
structure complete in all respects.

28 Providing, Fixing and testing lavatory basin


of approved color in vitreous china best quality
Porta make as approved by the Engineer
Incharge complete in all respects to their entire
satisfaction including all accessories and
fittings Grohe or General fitting Italy make,
such as 2- nos. 1/2" dia CP brass tee stop cock
with wall cups, PVC flexible inlet pipe
connection, CP brass strainer, waste water
jointing assembly, painted MS bracket set with
nut bolts etc., best quality PVC bottle trap, all
joints to services and drains, plugging and
screwing as necessary to the structure
complete in all respects.

a) Vanity Basin
Each 628.00
b) Wash basin with pedastal
Each 5.00

29 Providing and fixing stainless steel kitchen sink of


specified size best quality Porta or equivalent as
approved by the Engineer Incharge complete
in all respects to their entire satisfaction,
including all accessories and fittings Grohe or
General fitting Italy make or as approved by
the Engineer Incharge, PVC flexible pipe
connection, best quality bottle trap, 1/2" dia
CP brass tee stop cock, painted MS bracket set
with nut bolts, waste water jointing assembly, all
joints to services and drains, plugging.

Habib Rafiq (Pvt.) Limited Page 9 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.

i) Single bowl single drain board Each 321.00


ii) Janitor sink
Each 7.00
30 Providing, Fixing and testing urinal of
approved color in vitreous china best quality
Porta or equivalent make as approved
by the Engineer Incharge complete in all
respects to their entire satisfaction including
all accessories and fittings Fiore Italy or
Grohe or General fitting Italy make, such as 1-
nos. 1/2" dia CP brass tee stop cock with wall Each 6.00
cups, PVC flexible inlet pipe connection, CP
brass strainer, waste water jointing
assembly, flush valve etc., best quality bottle trap,
all joints to services and drains, plugging and
screwing as necessary to the structure
complete in all respects.

31 Providing, Fixing and testing C.P. mixing


valves for wash basin, sink, and shower best
quality Grohe or Fiore Italy make, complete in
all respects to their entire satisfaction
including all accessories and fittings complete in
all respects.
i) C.P. basin mixer
Each 633.00
ii) C.P. sink mixer
Each 328.00
iii) C.P. Muslim shower
Each 628.00
iv) C.P. Shower mixer
Each 565.00
v) C.P. Ablution mixer
Each 6.00

32 Providing, Fixing beveled edge mirror with frame


of specified size of Belgium glass or equivalent
as approved by the Engineer Incharge
complete in all respects to their entire Sft 5,697.00
satisfaction complete with 5 mm thick fixed to
walls etc. complete in all respects.

33 Providing, Fixing toilet paper holder best


quality Grohe make or as approved by the
Engineer Incharge complete in all respects to Each 628.00
their entire satisfaction including all
accessories and fittings.
34 Providing, Fixing soap dish best quality
Grohe make or as approved by the
Engineer Incharge complete in all respects to Each 1,198.00
their entire satisfaction including all
accessories and fittings.

35 Providing, Fixing, testing and


commissioning electric hand dryer
SIEMENS latest model or approved, Each 14.00
including jointing material etc. complete in all
respects.

Habib Rafiq (Pvt.) Limited Page 10 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.

36 Providing, Fixing soap dispensar best quality


Grohe make or as approved by the Engineer
Incharge complete in all respects to their entire Each 18.00
satisfaction including all accessories and
fittings complete.

37 Providing, Fixing, testing and


commissioning electric water heater Ariston Italy
make of requisite Kw and phase (single
or three pahse as per manufacturer's
recommendations), specified capacity
best quality as approved including all fittings
and vavles etc. complete in all respects.

a) 50 liters capacity Each 320.00


b) 100 liters capacity
Each 14.00

Habib Rafiq (Pvt.) Limited Page 11 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.

v) FIRE FIGHTING SYSTEM

38 Providing, laying, jointing, testing, and


disinfecting black steel, ASTM Schedule-40
seamless pipelines Huffaz or Lontrin or Star
corporation make with fittings including
fire rated hangers and supports Fisher, Hilti
or Sikla make, protective caoting consisting of
one coat of red oxide with two coats of enamel
paint for pipe above ground, complete in all
respects as per drawing and specifications.

I) 25 mm I/d Rft 68,788.00


ii) 32 mm I/d
Rft 9,728.00
iii) 40 mm I/d
Rft 6,968.00
i) 50 mm I/d
Rft 13,063.00
II) 63 mm I/d
Rft 2,814.00
vi) 75 mm I/d
Rft 5,011.00
iii) 100 mm I/d
Rft 7,056.00
iv)150 mm I/d
Rft 3,827.00
ix) 200 mm I/d
Rft 20.00

39 Providing, Installing, testing and


commissioning quick responce pandant
Sprinkler with escutcheons plate, 1/2" NPT, K-
factor 5.6, temperature rating 68 Deg C, UL/FM Each 4,199.00
approved, Viking, Tyco or Reliable make
complete as per drawing and
specifications.

40 Providing, Installing, testing and


commssioning Up-right Sprinkler, 1/2" NPT, K-
factor 5.6, temperature rating 68 Deg C, Quick
Response, Brass Finish, UL/FM
Each 1,305.00
approved,Viking, Tyco or Reliable make
complete as per drawing and
specifications.

Habib Rafiq (Pvt.) Limited Page 12 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
41 Providing, Installing, testing and
commissioning Horizontal Sidewall
Sprinkler with escutcheons plate as
approved, 1/2" NPT, K-factor 5.6,
temperature rating 68 Deg C, Quick Each 560.00
Response, Chrome Finish, UL/ULC Listed, Viking,
Tyco or Reliable make complete as per drawing
and specifications.

42 Providing, Fixing, testing and


commissioning alarm check valve
assembly consisting of alarm check valve, trim
assembly, water motor alarm, retard chamber, Each 1.00
pressure switch, Viking U.S.A. or equivalent
make, 150 mm size.

43 Providing, Fixing, testing and


commissioning Flow control valve
assembly including all accessories to
complete the work as per drawings and
specifications consisting of the following items:

a) 100 mm dia butterfly valve (Wafer) with gear


operator and supervisory switches, control
panel with necessary cable etc., Viking U.S.A.
or equivaent make with:
b) Vane type water flow alarm switch with Each
retard, Potter U.S.A. or equivalent make. 29.00
c) Water pressure gauge Viking U.S.A. or
equivalent make.

d) 100 dia pressure reducing valve UL/FM


approved, complete in all respects.
e) 2 piece full port brass ball valve 25 mm dia,
Watts U.S.A. or equivalent make.
f) Sight glass drain UL /FM approved 25 mm
dia U.S.A. make.

44 Providing, installing and testing


automatic air vent 50 mm I/d as per BSS
including the cost of 25 mm ball valve to
isolate the vent and pressure gauge Viking Each 1.00
U.S.A. or equivalent make complete as per
drawing and specifications.

45 Providng and fixing of External 100 mm dia Wet


type fire hydrant pedestal type NAFFCO Model
NHYD-060, SFFECO or FESCO make, Each 8.00
complete in all respects.

Habib Rafiq (Pvt.) Limited Page 13 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
46 Providing and fixing external Fire Hose Cabinet
which includes 2.5" dia x 2 Nos 100 Rft
length, dimensions H=100 cm x W=80 cm x D=
25 cm. NAFFCO Model NHC/750, SFFECO Each 8.00
or FESCO
make complete in all respects.

47 Providing, Fixing internal surface mounted Fire


Hose Reel double vertical Cabinet size
149 cm x 72 cm , upper compartment
consisting of swining arm type fire hose rack
1-1/2" dia with 1" dia PRV, lower compartment
consists of 2.5"x100 feet polyester fire hose, Each 111.00
2.5" landing valve with quick coupling, 10 lbs dry
powder or clean agent fire extinguisher, NAFFCO
model NF 900-S, FESCO or SFEECO make
complete in all respects.

48 Providing, Fixing bucket with throwing


handle with stand complete in all respects.
(Include 4 Buckets & Stand) FESCO UAE make, Each 60.00
NAFFCO or SFFECO UAE make

49 Providing, Fixing of abc Dry Chemical


Powder Fire Extinguishers 6-KG, with
controlled discharge operating valve,
pressure guage, wall bracket and initial charge Each 290.00
Model NP-6 FESCO UAE make, NAFFCO or
SFFECO UAE make.

50 Providing, Fixing of water type Fire


Extinguishers 6-KG, with controlled
discharge operating valve, pressure guage, wall Each 290.00
bracket and initial charge FESCO UAE
make, NAFFCO or SFFECO UAE

51 Providing, Fixing of 6-Lit wet chmical Fire


Extinguishers FESCO UAE make,
NAFFCO or SFFECO UAE make., with
controlled discharge operating valve, Each 210.00
pressure guage, wall bracket and initial charge
complete in all respects.

52 Providing, Fixing of Halitron Fire


Extinguishers 4-KG, with controlled
discharge operating valve, pressure guage, wall Each 58.00
bracket and initial charge FESCO UAE make,
NAFFCO or SFFECO UAE make

53 Providing,Fixing of Stand alone Halitron


Fire Extinguishers, with controlled
discharge operating valve, pressure guage, wall Each 58.00
bracket and initial charge NAFFCO, SFFECO
or FESCO make.

Habib Rafiq (Pvt.) Limited Page 14 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.

54 Providing and fixing breeching inlets 2- way


(manufactured & comply to BS- 5041-3-
1975) , FESCO UAE make, NAFFCO or Each 1.00
SFFECO UAE make complete in all
respects.

PUMPS

55 Providing, Fixing, testing and


commissioning, fire pump set
(manufactured by Peerless USA,
Armstrong USA, Xylem USA), and
consisting of the following including all
accessories and fiitings complete in all
respects. Pumps shall be UL listed and FM
approved.

i) Electrical driven centrifugal fire pump end


suction 750 USgpm @ 14 bar pressure.
ii) Diesel driven fire pump centrifugal end
suction 750 USgpm @ 14 bar pressure.
iii) Electrical driven jockey pump centrifugal end
suction 75 USgpm @ 14 bar pressure.
iv) Control panel by Tornatech: DOL
seperate controller for each pump base
mounted UL/FM approved.
v) Suction side accessories includse but not
limited to:
a) OS & Y Gate valve 200 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
1 No.
b) OS & Y Gate valve 150 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
2 No.
c) OS & Y Gate valve 50 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
1 No. Each 1.00
d) S.S. expansion joint 150 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
2 No.
e) Y-strainer 200 mm dia, Class 125, 200 psi
working pressure, UL/FM approved. 1 No.

f) Anti Vortex plate 200 mm 2 No.


g) Suction header 200 mm dia. 1 No.
vi) Devivery side accessories includes but not
limited to :
a) OS & Y Gate valve 150 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
4 No.
b) OS & Y Gate valve 50 mm dia, Class
125, 200 psi working pressure, UL/FM
approved. 1 No.
c) S.S. expansion joint 150 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
2 No.

Habib Rafiq (Pvt.) Limited Page 15 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
d) Check valve 150 mm dia, Class 125, 200
psi working pressure, UL/FM approved. 2 No.

e) Check valve 50 mm dia, Class 125, 200 psi


working pressure, UL/FM approved. 1 No.

f) Discharge header 6" dia. 1 No.

56 Providing and fixing OS&Y Type gate valve


flanged having working pressure 200 psi,
UL/FM Approved.

a) 63 mm dia
Each 8.00
b) 75 mm dia
Each 6.00
a) 100 mm dia
Each 6.00
b)150 mm dia
Each 6.00

57 Providing, Fixing and testing pressure relief valve


Cla-val or equivalent make complete in all Each 1.00
respects.150 mm inch

58 TUBEWELL 0.5 Cusec capacity

a Mobilization Demobilization of drilling


Job 1.00
SITE PREPARATION 

b Drilling and installation of supply well


Job 1.00
c Pumping operation from supply well for
Job 1.00
d Excavation of Drilling Pit ( 30 x 40 x 6 ) Cft
Job 1.00
TUBEWELL BORING

e Reverse rotary drilling of bore for tubewell

Habib Rafiq (Pvt.) Limited Page 16 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
a) From ground level to 200 ft , 20 inches
Rft 200.00
b) Exceeding 200 ft to the depth of 600 ft
Rft 100.00
TUBEWELL MATERIALS 

Strainer

f Supply and installing fiberglass strainer, Dia:6


inch Wall thickness: 6mm, Slot Size: 1mm, Rft 80.00
including nylon sticks and sockets etc.

Bail Plug
g Supply and installing of fiberglass bail plug Dia: 6
inch, Wall thickness : 6mm Rft 10.00

Blind Pipe
i Supply & installing of fiberglassblind pipe, Dia: 6
inch, Wall thickness:6mm, including welding etc
(to be used between MS reducer and fiberglass Rft 140.00
blind pipe)
Housing

j Supply and installation of MS Housing, Dia: 10


inch, wall thickness: 6 mm, including welding etc. Rft 70.00

Reducer
k Supply and installation of MS Reducer Dia: 10"/6",
Wall thickness: 6mm, including welding etc each 1.00

Sockets and Nipple

l Supply and installation of MS socket fabricated to


join MS Housing of dia: 10" with fiberglass pipe of each 1.00
dia: 6"

Pea Gravels (Shrouding)


m Supply of Pea Gravels from Attock quarry,
with graded per gravel 3/8” to 1/8” (10 to 3 mm)
around tube well in bore hole.including sieving,
Rft 230.00
washing and lowering in the annular space of the
borehole

Centralizers
n Supply and installation of MS centralizers for 10"
dia MS pipes and 6" dia fiberglass pipes and No 20.00
strainer.

Well Cap
o Providing and fixing MS well cap on tubewell
each 1.00
SOIL SAMPLING 

p Taking soil samples at every 10 ft interval or at


change of strata, which ever is less, or as directed job 11.00
by Engineer.
SANITARY SEALING 

Habib Rafiq (Pvt.) Limited Page 17 of 20


PAVILLION EXECTIVE
BILL OF QUANTITIES FOR PLUMBING & FIRE FIGHTINGH WORKS
SR.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
q Sealing 60 feet from ground level with 1: 2
Cement sand mortar in the annular space of the
Rft 60.00
tubewell around MS Housing

r Providing and laying puddle seal 6 Ft. long


each 1.00

s Providing and laying Bentonite in tubewell bore. Job 1.00

t Providing and fixing PVC pipe 2 inch dia of

BSS Class D with working pressure


Rft 120.00
complete in all respects.
u Providing and welding 3/4" dia steel bars at joints
of MS pipes Job 12.00

DEVELOPMENT 

v Development of tubewell with contractors


own pumping machinary at 1.5 times the design
discharge for minimum period of 72 hrs and water
is sand free and the formation around well has Hour 48.00
stabilized to the satisfaction of Engineer

WATER SAMPLE TESTING
w Testing the sample of water for chemical and
biological test complete in all respects. Job 1.00
x Providing, fixing, testing and
commissioning submersible pump for
tubewell Grundfos or KSB, make having
discharge 0.5 cusec and haed 100 ft. with motor
of requisite horse power, column pipe length
60 ft., including all necessary valves and
fittings, control panel etc. complete in all Each 1.00
respects. (Note: final pumping head and
pump setting shall be finalized after actual
boring at site and determination of actual water
table)

59 Cost of 2nd tubewell as in item 58.


Each 1.00

Sub Total -

Total Estimated Cost Rs


-

Habib Rafiq (Pvt.) Limited Page 18 of 20


#REF!
#REF!

Item 25mm dia pipe or 1"

Length/
S/No. Description Unit No Width Height Qty Remarks
Parameter
SECOND FLOOR
1 0

2 0

3 0

4 0

5 0

6 0

7 0

8 0

9 0

10 0

11 0

12 0

13 0

14 0

15 0

16 0

17 0

18 0

19 0

20 0

21 0

22 0

23 0

24 0

B Total Qty of Basement-1 -


C Total Qty of Basement-2 & 1 #REF!
D Rate Per SFT 52
E Total Work Done Amount= #REF!

Q.S_________________ C,M_________________
PUMPS Unit Quantity Amount
1 Providing, Fixing, testing and
commissioning, fire pump set
(manufactured by Peerless USA,
Armstrong USA, Xylem USA), and
consisting of the following including all
accessories and fiitings complete in all
respects. Pumps shall be UL listed and FM
approved.

i) Electrical driven centrifugal fire pump end


suction 750 USgpm @ 14 bar pressure.
ii) Diesel driven fire pump centrifugal end
suction 750 USgpm @ 14 bar pressure.
iii) Electrical driven jockey pump centrifugal end
suction 75 USgpm @ 14 bar pressure.
iv) Control panel by Tornatech: DOL
seperate controller for each pump base
mounted UL/FM approved.
v) Suction side accessories includse but not
limited to:
a) OS & Y Gate valve 200 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
1 No.
b) OS & Y Gate valve 150 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
2 No.
c) OS & Y Gate valve 50 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
1 No. Each 1.00
d) S.S. expansion joint 150 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
2 No.
e) Y-strainer 200 mm dia, Class 125, 200 psi
working pressure, UL/FM approved. 1 No.

f) Anti Vortex plate 200 mm 2 No.


g) Suction header 200 mm dia. 1 No.
vi) Devivery side accessories includes but not
limited to :
a) OS & Y Gate valve 150 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
4 No.
b) OS & Y Gate valve 50 mm dia, Class
125, 200 psi working pressure, UL/FM
approved. 1 No.
c) S.S. expansion joint 150 mm dia, Class 125,
200 psi working pressure, UL/FM approved.
2 No.
d) Check valve 150 mm dia, Class 125, 200
psi working pressure, UL/FM approved. 2 No.

e) Check valve 50 mm dia, Class 125, 200 psi


working pressure, UL/FM approved. 1 No.

f) Discharge header 6" dia. 1 No.


Total -

You might also like