MPA STUTTGART
Otto-Graf-Institut
Materialprifungsanstalt Universitat Stuttgart
utecaprtingsastat nvr Stata: Pstach 80140-07081" Stage
Notified Testing Supervising and Certification Body 0672-CPD-001
EC-CERTIFICATE OF CONFORMITY
0672 - CPD - 006.3
In compliance with Directive 89/106/EEC of the Council of European Communities of 21 December
1988 on the approximation of legal and administrative provisions of the Member States relating to
construction products (Construction Products Directive - CPD), amended by Directive 93/68/EEC of the
Council of European Communities of 22 July 1998, itis confirmed that the construction product
RW - Pot Bearing
with elastomeric pad of compound Nyhapren 1115 and internal seal of brass or of PTFE/carbon as
fixed bearing or with horizontal sliding part, types 2.1 to 2.3 in accordance with EN 1337-1, for effective
bearing temperatures of -35 °C to +48 °C as sliding bearing and of -40 °C to +50 °C as fixed bearing,
for use in building and civil engineering works where requirements on individual bearings are critical,
placed on the market by
RW SOLLINGER HUTTE GmbH.
‘Auschnippe 52, D-37170 Uslar, FRG
‘and produced in the factory
Reisner & Wolff Engineering Gesellschaft m. b. H.
TerminalstraBe 25, A-4600 Wels, Austria
is subjected by the manufacturer to a factory production control and to the further testing of samples
taken at the factory in accordance with a prescribed test plan and that the notified body - MPA
Universitat Stuttgart - has performed the initial type-testing of the relevant characteristics of the product,
the initial inspection of the factory and of the factory production control and performs the continuous
surveillance, assessment and approval of the factory production control.
This certificate attests that all provisions concerning the attestation of conformity and the performances
described in Annex ZA of the standard
EN 1337-5:2005,
were applied and that the product fulis all the prescribed requirements.
This certificate was first issued on 15 June 2007 and remains valid as long as the conditions laid down
in the harmonised technical specification in reference or the manufacturing conditions in the factory or
the factory production control itself are not modified significantly
Stuttgart, 19 June 2009
rho
Dr.-Eng. J. Wiedemeyer
Head of Certification Body
tn complance win OINIEG 17026 acute Tesing Lab. Accretaton Body recoprized by DAP. Accretion val for tsing methods (DAR. Rea,
rOAPPLIOT Gt) std te comcate, Astor Acerealaton granted in conplance wih DIN EN ISOMEC 17025 grartea by DKDIPTE, KBA, 215
nd action on te basi ot DIN EN ISO 9004 200 by the TOV PZ body approved by DIB, Bog reed Wo EU 0672 ard 1080
atoitparungsanstat Universit Stutgan ‘8¥/-8ark Stata) LEB
Praterwating Phone +49 (1717 685-0 ‘Recount No 7871 S21 657 LZ 600 01 01
70868 Sega (Vatargen) Teletan: 4 (0717 66662605 IBAN: Dest 6oos O10 rary s2te87
Gseione be 1arrautoe rere ww moa usar le SICISWIFT-Coaa: SOLADESTXXK