Professional Documents
Culture Documents
1. Overview
HS8110 is a PWM (pulse width modulation) control circuit with complete protection
function applied to switching power supply.
To be used in the switching power supply part of a desktop PC (personal computer). The
HS8110 includes the following different functions: Over voltage protection, under voltage
protection, voltage protection, power good output (PG), remote on/off control, etc. Only a small
number of external components can realize personal electronic.
2. Features
3. Application
ATX
NLX
SFX(micro_ATX)
Page 1 of 9
Ver. 1.0
Phone: 0512-68256888
Suzhou Huaxin Microelectronics Co., Ltd.
Email:h-sun@h-sun.com
HuaXin Micro-electronics Co., Ltd
Url: www.china-chip.com
4. Package information
2) Pin Description
Page 2 of 9
Ver. 1.0
Phone: 0512-68256888
Suzhou Huaxin Microelectronics Co., Ltd.
Email:h-sun@h-sun.com
HuaXin Micro-electronics Co., Ltd
Url: www.china-chip.com
5. Circuit diagram
7. Recommended value
Page 3 of 9
Ver. 1.0
Phone: 0512-68256888
Suzhou Huaxin Microelectronics Co., Ltd.
Email:h-sun@h-sun.com
HuaXin Micro-electronics Co., Ltd
Url: www.china-chip.com
1) Error Op Amp
Symbol Characteristic Test Conditions Min. Value Typ. Value Max. Value Unit
---- Closed-loop voltage gain 0.5V~3.5V ----- 65 ----- dB
---- Unity-gain Bandwidth 0dB ----- 320 ----- kHz
---- OPENG Bias voltage OPENG floating 2.38 2.45 2.52 V
2) C1, C2 Output
Symbol Characteristic Test Conditions Min. Value Typ. Value Max. Value Unit
Vdssat Output saturation voltage Id = 200mA ----- 1.1 1.3 V
Idoff Drain off current Vcc = Vd = Vs = 0 ----- 2 10 uA
tr Rise time ----- ----- 100 200 ns
tf Fall time ----- ----- 50 200 ns
3) Protect
Symbol Characteristic Test Conditions Min. Value Typ. Value Max. Value Unit
OVP1 3.3V over voltage Protection ----- 3.8 4.1 4.3 V
OVP2 5V over voltage Protection ----- 5.8 6.2 6.6 V
OVP3 12V over voltage Protection ----- 4.41 4.64 4.90 V
OVP4 PT over voltage protection ----- 1.2 1.25 1.3 V
UVP1 3.3V under voltage Protection ----- 1.78 1.98 2.18 V
UVP2 5V under voltage Protection ----- 2.70 3.00 3.30 V
UVP3 12V under voltage protection ----- 2.11 2.37 2.63 V
PT under voltage shutdown
UVP4 ----- 0.55 0.62 0.68 V
voltage
Td.uvp Under voltage protection delay ----- 100 280 500 ms
4) Control On/Off
Symbol Characteristic Test Conditions Min. Value Typ. Value Max. Value Unit
Vremh REM input high level ----- 2 ----- ----- V
VremI REM input low level ----- ----- ----- 0.8 V
Vremo REM pull high level ----- 2.0 ----- 5.25 V
Trem REM delay time ----- 30 36 42 ms
Toff REM shutdown delay time ----- 3.5 4.5 5.5 ms
Page 4 of 9
Ver. 1.0
Phone: 0512-68256888
Suzhou Huaxin Microelectronics Co., Ltd.
Email:h-sun@h-sun.com
HuaXin Micro-electronics Co., Ltd
Url: www.china-chip.com
Symbol Characteristic Test Conditions Min. Value Typ. Value Max. Value Unit
Vdet Detect input voltage ----- 0.55 0.62 0.68 V
Rpup.pg PG pull-up voltage ----- ----- 5 ----- kΩ
Rpg PG output load resistance ----- 0.5 1 2 kΩ
----- PG delay time ----- 150 280 350 ms
Vsat.pg Output saturation voltage Ipg = 10mA ----- 0.2 0.4 V
6) Quiescent Current
Symbol Characteristic Test Conditions Min. Value Typ. Value Max. Value Unit
Icc Quiescent current ----- ----- 10 20 mA
7) Soft Start
Symbol Characteristic Test Conditions Min. Value Typ. Value Max. Value Unit
Iss.sink SS sink current ----- ----- 13 ----- uA
Iss.source SS source current Ipg = 100mA ----- 700 ----- uA
8) Oscilator
Symbol Parameter Test Conditions Min. Value Typ. Value Max. Value Unit
Fosc Oscillation frequency RT = 120 kΩ 50 ----- 70 kHz
9. Application notes:
1) Input impedance
Page 5 of 9
Ver. 1.0
Phone: 0512-68256888
Suzhou Huaxin Microelectronics Co., Ltd.
Email:h-sun@h-sun.com
HuaXin Micro-electronics Co., Ltd
Url: www.china-chip.com
3) Control on/off
Page 6 of 9
Ver. 1.0
Phone: 0512-68256888
Suzhou Huaxin Microelectronics Co., Ltd.
Email:h-sun@h-sun.com
HuaXin Micro-electronics Co., Ltd
Url: www.china-chip.com
The internal reference voltage and the current generated by the external resistor RT charge and discharge the
internal capacitor to generate Sawtooth waveform. The sawtooth waveform is compared with the feedback voltage
to generate a pulse width modulated output. The PWM frequency is available with external resistor RT, calculated by
the following formula, where the unit of F is KHz and the unit of RT is KΩ:
F = 7200/RT
Increasing the amplitude of the feedback control signal can linearly reduce the output pulse width, and at the same
time, SS can also limit the output pulse width timing.
Page 7 of 9
Ver. 1.0
Phone: 0512-68256888
Suzhou Huaxin Microelectronics Co., Ltd.
Email:h-sun@h-sun.com
HuaXin Micro-electronics Co., Ltd
Url: www.china-chip.com
6) PT function
PT signal is used to realize overvoltage (or overload) protection (OVP) (Vpt>1.25V); or realize shutdown
undervoltage protection (VUP) function (Vpt < 0.62V).
7) Function of DET
If the voltage of DET is less than 0.62V, PG will jump to low level, while C1 and C2 remain unchanged.
In some power system applications, adding a R8 resistor at the pin REM can prevent external noise from
destroying REM.
Page 8 of 9
Ver. 1.0
Phone: 0512-68256888
Suzhou Huaxin Microelectronics Co., Ltd.
Email:h-sun@h-sun.com
HuaXin Micro-electronics Co., Ltd
Url: www.china-chip.com
2) Dimensions
Page 9 of 9
Ver. 1.0