Professional Documents
Culture Documents
27e Hot Tap Permit
27e Hot Tap Permit
YANSAB
H O T T A P P E R M I T
IF THE ANSWER TO ANY OF THE FOLLOWING QUESTIONS IS YES, THE HOT TAP CANNOT BE MADE.
Is hot tap diameter greater than 50% of run pipe diameter? If yes, a full
1. Yes No
encirclement pad or spit tee is required.
8. Are there any obstructions that may interfere with tapping machine clearance? Yes No
Tank or vessel liquid level less than three (3) feet above tap location?
9. Yes No
_________________ Level ____________________
10. Is hot tap upstream of rotating equipment without filters or traps? Yes No
APPROVAL SIGNATURES
PROJECT/SITE MANAGER
CONSTRUCTION MANAGER
PROJECT/SITE SUPERINTENDENT
H:\000_General\Share\103\Safety\27e-Hot-Tap-Permit.doc