Professional Documents
Culture Documents
CAF119 Midland Building Products LTD - 437049
CAF119 Midland Building Products LTD - 437049
No CAF 119
This is to certify that, in accordance with
TS00 General Requirements for Certification of Fire Protection Products
The undermentioned products of
1
Designated CERTIFIRE Approved Door and Blank Manufacturers
as Converted by
Signed and sealed for and on behalf of Warringtonfire Testing and Certification Limited
Paul Duggan
Certification Manager
th
Issued: 9 November 2000
rd
Reissued: 3 June 2021
nd
Valid to: 2 June 2026
Page 1 of 10
4. Apertures, glazing and frames shall be in accordance with Premdor Crosby Limited construction
specifications and data sheets for the above referenced products.
5. Please refer to the relevant / current CERTIFIRE data sheet for suitable frame material options.
6. Processing is conducted in accordance with Premdor Crosby Limited procedures.
7. The process is approved on the basis of a suitable quality management system.
8. Inspection and surveillance of factory production control
9. The approval relates to on-going production.
10. Approved products carry both the original manufacturer’s CERTIFIRE approval label, a second
label identified with the processor’s name and contact number, the CERTIFIRE name, or name
and mark, and the CERTIFIRE certificate number and a unique serial number.
th
Issued: 9 November 2000
rd
Signed Page 2 of 10 Reissued: 3 June 2021
nd
E/144, E/203, E/310. E/335, E/418, E/419 Valid to: 2 June 2026
4. Apertures, glazing and frames shall be in accordance with JELD-WEN UK Limited construction
specifications and data sheets for the above referenced products.
5. Please refer to the relevant / current CERTIFIRE data sheet for suitable frame material options.
6. Processing is conducted in accordance with JELD-WEN UK Limited procedures.
7. The process is approved on the basis of a suitable quality management system.
8. Inspection and surveillance of factory production control
9. The approval relates to on-going production.
10. Approved products carry both the original manufacturer’s CERTIFIRE approval label and a
second label identified with the processor’s name and contact number, the CERTIFIRE name, or
name and mark, together with the CERTIFIRE certificate number and a unique serial number.
th
Issued: 9 November 2000
rd
Signed Page 3 of 10 Reissued: 3 June 2021
nd
E/144, E/203, E/310. E/335, E/418, E/419 Valid to: 2 June 2026
1. This approval relates to the cutting of apertures with or without glazing in doors supplied by
Vicaima Limited and to the manufacture of doorframes. Subject to the undermentioned
conditions, the doors will meet the requirements as detailed in the relevant certificates.
2. This certification is provided to the client for their own purposes and we cannot opine on whether
it will be accepted by Building Control authorities or any other third parties for any purpose.
3. The certified doors for which the cutting of apertures, subsequent glazing thereof and provision of
frames is approved are as following:
CF454 FD60 x
Note: The scope of approval and field of application for the doors is contained in the above referenced
certificates.
4. Apertures, glazing and frames shall be in accordance with Vicaima Limited construction
specifications and data sheets for the above referenced products.
5. Please refer to the relevant / current CERTIFIRE data sheet for suitable frame material options.
10. Approved products carry both the original manufacturer’s CERTIFIRE approval label and a
second label identified with the processor’s name and contact number, the CERTIFIRE name, or
name and mark, together with the CERTIFIRE certificate number and a unique serial number.
th
Issued: 9 November 2000
rd
Signed Page 4 of 10 Reissued: 3 June 2021
nd
E/144, E/203, E/310. E/335, E/418, E/419 Valid to: 2 June 2026
1. This approval relates to the sizing and lipping and cutting of apertures, with or without glazing, in
blanks supplied by ZMR Limited and to the manufacture of door frames. Subject to the
undermentioned conditions, the doors will meet the requirements as detailed in the relevant
certificates.
2. This certification is provided to the client for their own purposes and we cannot opine on whether
it will be accepted by Building Control authorities or any other third parties for any purpose.
3. The certified blanks for which the sizing and lipping of blanks, cutting of apertures, subsequent
glazing thereof and provision of frames is approved are as following:
Certificate Timber Door Sizing & Aperture Glazing of Manufacture of Door Assemblies
Number Product lipping Cutting Apertures Frames
Doorsets Doors &
Frames
FD30
CF819 Strebord 44
FD60
CF820 Strebord 54
Note: The scope of approval and field of application for the doors is contained in the above referenced
certificates.
4. Lippings, apertures, glazing and frames shall be in accordance with ZMR Limited construction
specifications and data sheets for the above referenced products.
5. Please refer to the relevant / current CERTIFIRE data sheet for suitable frame material options.
10. Approved products carry both the original manufacturer’s CERTIFIRE approval label and a
second label identified with the processor’s name and contact number, the CERTIFIRE name, or
name and mark, together with the CERTIFIRE certificate number and a unique serial number.
th
Issued: 9 November 2000
rd
Signed Page 5 of 10 Reissued: 3 June 2021
nd
E/144, E/203, E/310. E/335, E/418, E/419 Valid to: 2 June 2026
2. This certification is provided to the client for their own purposes and we cannot opine on whether
it will be accepted by Building Control authorities or any other third parties for any purpose.
3. The certified doors for which the cutting of apertures, subsequent glazing thereof and provision
of frames is approved area as following:
Note: The scope of approval and field of application for the doors is contained in the above referenced
certificates.
4. Apertures, glazing and frames shall be in accordance with Deanta UK Limited construction
specifications and data sheets for the above referenced products.
5. Please refer to the relevant / current CERTIFIRE data sheet for suitable frame material options.
10. Approved products carry both the original manufacturer’s CERTIFIRE approval label and a
second label identified with the processor’s name and contact number, the CERTIFIRE name, or
name and mark, together with the CERTIFIRE certificate number and a unique serial number.
th
Issued: 9 November 2000
rd
Signed Page 6 of 10 Reissued: 3 June 2021
nd
E/144, E/203, E/310. E/335, E/418, E/419 Valid to: 2 June 2026
2. This certification is provided to the client for their own purposes and we cannot opine on whether it will
be accepted by Building Control authorities or any other third parties for any purpose.
3. The certified blanks for which the sizing and lipping of blanks, cutting of apertures, subsequent glazing
thereof and provision of frames is approved are as following:
FD30 Strebord
CF807
blank
FD60 Strebord
CF808
blank
FD30 Stredor
CF5614
blank
Note: The scope of approval and field of application for the doors is contained in the above
referenced certificates.
4. Lippings, apertures, glazing and frames shall be in accordance with Falcon Panel Products Limited
construction specifications and data sheets for the above referenced products.
5. Please refer to the relevant / current CERTIFIRE data sheet for suitable frame material options.
10. Approved products carry a label identified with the processor’s name and contact number, the
CERTIFIRE name, or name and mark, together with the CERTIFIRE certificate number and a unique
serial number.
th
Issued: 9 November 2000
rd
Signed Page 7 of 10 Reissued: 3 June 2021
nd
E/144, E/203, E/310. E/335, E/418, E/419 Valid to: 2 June 2026
2. This certification is provided to the client for their own purposes and we cannot opine on whether
it will be accepted by Building Control authorities or any other third parties for any purpose.
3. The certified blanks for which the sizing and lipping of blanks, cutting of apertures, subsequent
glazing thereof and provision of frames is approved are as following:
Certificate Timber Door Sizing & Aperture Glazing of Manufacture of Door Assemblies
Number Product lipping Cutting Apertures Frames
Doorsets Doors &
Frames
FD30 Prima
CF435 blank
FD60 Prima
CF436
blank
FD30 Optima
CF534
blank
FD60 Optima
CF535
blank
Note: The scope of approval and field of application for the doors is contained in the above referenced
certificates.
4. Lippings, apertures, glazing and frames shall be in accordance with Halspan Limited construction
specifications and data sheets for the above referenced products.
5. Please refer to the relevant / current CERTIFIRE data sheet for suitable frame material options.
10. Approved products carry a label identified with the processor’s name and contact number, the
CERTIFIRE name, or name and mark, together with the CERTIFIRE certificate number and a
unique serial number.
th
Issued: 9 November 2000
rd
Signed Page 8 of 10 Reissued: 3 June 2021
nd
E/144, E/203, E/310. E/335, E/418, E/419 Valid to: 2 June 2026
2. This certification is provided to the client for their own purposes and we cannot opine on whether it will
be accepted by Building Control authorities or any other third parties for any purpose.
3. The certified blanks for which the sizing and lipping of blanks, cutting of apertures, subsequent glazing
thereof and provision of frames is approved are as following:
Certificate Timber Door Sizing & Aperture Glazing of Manufacture Door Assemblies
Number Product lipping Cutting Apertures of Frames
Doors &
Doorsets
Frames
FD30 Flamebreak
CF5260
blank
FD60 Flamebreak
CF5261
blank
Note: The scope of approval and field of application for the doors is contained in the above
referenced certificates.
4. Lippings, apertures, glazing and frames shall be in accordance with Pacific Rim Wood Limited
construction specifications and data sheets for the above referenced products.
5. Please refer to the relevant / current CERTIFIRE data sheet for suitable frame material options.
10. Approved products carry a label identified with the processor’s name and contact number, the
CERTIFIRE name, or name and mark, together with the CERTIFIRE certificate number and a unique
serial number.
th
Issued: 9 November 2000
rd
Signed Page 9 of 10 Reissued: 3 June 2021
nd
E/144, E/203, E/310. E/335, E/418, E/419 Valid to: 2 June 2026
Annex A
MBP UKD
Units 6-9 Units 19, 21, 24 & 25
Spartan Industrial Centre Spartan Industrial Centre
Brickhouse lane Brickhouse lane
West Bromwich West Bromwich
B70 0DH B70 0DH
ZMR JSL
Units 10-13 Unit 43
Spartan Industrial Centre Llantarnam Park
Brickhouse lane Cwmbram
West Bromwich NP44 3AW
B70 0DH
SDC SJP
Unit 1A Units 5-6
Wyncolls Road Slack Lane
Severalls Industrial park Off Heanor Gate Industrial Estate
Colchester Derbyshire
C04 9HU DE75 7GX
MDC LDC
MDC House Unit 4
Units 3-5 Carbon Court
Shield Drive Peckfield Business Park
Wardley Business Park Phoenix Avenue
Worsley Micklefield
Manchester Leeds
M28 2QB LS25 4DY
th
Issued: 9 November 2000
rd
Signed Page 10 of 10 Reissued: 3 June 2021
nd
E/144, E/203, E/310. E/335, E/418, E/419 Valid to: 2 June 2026