Professional Documents
Culture Documents
Fatima Fertilizer
• The part should be cleared of dust, loose rust, and surface
contamination.
• Immerse rusted part in rust remover and left to soak until
the rust is removed.
• Apply cleaner/neutralizer for surface stability.
• After drying, apply antirust oil and let it cure.
• After curing, wrap the part with VpCI antirust blue film and
seal it with tape.
• Attached are case histories.
CASE HISTORY-Long Term Preservation
of Power Plant Rotor in Karachi-2 Years
PROBLEM
Customer wanted a long term preservation solution for their expensive equipment after the
removal of old coating. So that they can use their spare whenever required.
PRODUCTS USED
• CorShield VpCI®-369
• EcoAir® 414 Cleaner/Degreaser
• VpCI®-126 Film Roll
APPLICATION
As the customer required. first removed old coating with VpCI Degreaser, apply VpCI 369 Coating
and then preserve in VpCI film.
Characteristics of coating:
• It was easily applied by spraying
• It did not dry out or run down the vertical walls of the parts
• It left an oily film that was easy to remove
CONCLUSION
Rotor is now preserved for 2 years.
1. BEFORE 2. CLEANED
CLEANING AND COATED
CASE HISTORY-Long Term Preservation
of Power Plant Rotor in Karachi-2 Years
3.FINAL PACKAGING
For More details Contact Us at
Case History
Automotive - Rust Solution
Problem Description:
An Automotive Vendor having issues of Rust and Preservation of
Nuts and Bolts
Rust Removing
BEFORE AFTER
Rust Removing and Applying Rust preventive
BEFORE AFTER
After PRODUCTS
VpCI®-426
VpCI®-419
PROBLEM
Approximately 320 valve bodies exported to Flowserve
in the USA were rejected due to heavy rust, despite be-
ing protected with Rustlick 631 and Suprabha VCI bags
(40/bag). The customer, CPC, had to either remove the
rust from the valve bodies and send them to Flowserve,
or scrap them and supply a fresh batch.
DATE APPLICATION
August 2014 Vertex offered to remove the rust with VpCI®-426, a
water-based corrosion, scale, and rust remover. Vertex
CORTEC® REPRESENTATIVE then neutralized and cleansed the parts with VpCI®-419
Cortec® Corrosion Solutions India Pvt Ltd cleaner-degreaser, leaving the parts clean and rust free.
DISTRIBUTOR CONCLUSION
Vertex Corrotech Solutions Pvt Ltd The customer was very much pleased with the Cortec®
products’ performance and service support extended by
CUSTOMER Vertex. The treatment resulted in a significant cost sav-
CPC Pvt Ltd ings for which the customer was very grateful.
Q
U
A
EXCELLENCE
I
T
Y C O R P O R AT I O N
ch524 1/2017 Page 1 of 2 ® Environmentally Safe VpCI ®/MCI ® Technologies
Printed on recycled paper 100% Post Consumer
www.cortecvci.com
©2015, Cortec Corporation. All Rights Reserved. Copying of these materials in any form without the written authorization of Cortec Corporation is strictly prohibited.
ISO Accreditation applies to Cortec’s processes only.
ch524 1/2017 Page 2 of 2
Printed on recycled paper 100% Post Consumer
©2015, Cortec Corporation. All Rights Reserved. Copying of these materials in any form without the written authorization of Cortec Corporation is strictly prohibited.
ISO Accreditation applies to Cortec’s processes only.