Professional Documents
Culture Documents
@"$*A>**BC%%"(>*D/***EF/*:GH
IJ<@(,*KLAMKNNMAKFK***OCP,*KLAMKNNMAFA:************************#C8(#QR(@$%C"%************SSS=R(@$%C"%=RC
Service Bulletin SB 432
March ‘02
Page 1 of 5
Warning: Check for proper oil level before using this equipment.
Use 20 weight non-detergent oil for ambient temperatures between 40°F and 90°F.
Use 30 weight non-detergent oil for ambient temperatures above 90°F.
If you require assistance, contact your local Devair Distributor or Authorized Service Centre. If you wish to contact
Devair!directly
"#$%"&'$or
()need
*&+,**-
to.locate
/012your
31*2closest
"%*4+#$(Distributor,
5#*6*4'778please
"(#**9:*; <<7(us
reach %*1
at):=>*?@"$*A>**BC%%"(>*D/***EF/*:GH
IJ<@(,*KLAMKNNMAKFK***OCP,*KLAMKNNMAFA:************************#C8(#QR(@$%C"%************SSS=R(@$%C"%=RC
Phone: (705) 728-5657 Website: www.devair-compressors.com
Fax: (800) 561-1663 Email: sales@devair.ca
!"#$%"&'$()*&+,**-./01231*2"%*4+#$(5#*6*4'778"(#**9:*;<<7(%*1)=>*?@"$*A>**BC%%"(>*D/***EF/*:GH
IJ<@(,*KLAMKNNMAKFK***OCP,*KLAMKNNMAFA:************************#C8(#QR(@$%C"%************SSS=R(@$%C"%=RC
Service Bulletin SB 432
March ‘02
Page 2 of 5
!"#$%"&'$()*&+,**-./01231*2"%*4+#$(5#*6*4'778"(#**9:*;<<7(%*1)=>*?@"$*A>**BC%%"(>*D/***EF/*:GH
IJ<@(,*KLAMKNNMAKFK***OCP,*KLAMKNNMAFA:************************#C8(#QR(@$%C"%************SSS=R(@$%C"%=RC
Service Bulletin SB 432
March ‘02
Page 3 of 5
The Item Numbers in the Chart(s) below refer to the Pump Breakdown on Page 2.
Item: Part Number Qty Description Item: Part Number Qty Description
1 SS-1230 1 Pipe Plug Black 1/2” 37 432-4217 2 HP Intake Valve Assembly
17 SS-3223 1 Countersunk Pipe Plug Blk 3/8” 52 SS-1249 2 ¾ x 1/4” Shoulder Bushing
18 432-328 2 Aftercooler Elbow 53 432-330 2 Intercooler
27 SS-6044 8 3/8-16 x 1” Allen Set Screw 62 SS-1508 1 5/8” Medium Lock Washer
Note: This Kit can only be used on Pumps New Style ‘CPR’ Assembly.
that operate at 500 rpm or more. This CPR can be retro-fitted onto an
existing ‘432’ Series Pump. Order:
(1) ‘CPR-9700’ Kit
(4) ‘SS-24’ HHCS
(1) ‘432-136’ CPR Housing
(1) ‘432-12’ Gasket
Valve Stem
Valve
Spring
25 & 28 Valve Set Screw 180 15 20.3 1. Diametral Clearance of oversized Cylinders and Pistons is the same
as standard Cylinders and Pistons.
26 Cap Nuts 180 15 20.3 2. Cylinders must be within diametral tolerance at all points, out of round
or taper must not exceed .0005.
30 Valve Plug - 125 169 3 Hone 20 min to 35 max micro inches of surface roughness.
4. De-burr the sharp corners at the top of the Cylinder opening with a
37 HP Intake Valve 180 15 20.3 1/64 to 1/32 x 30° chamfer.
38 Head Bolts 240 20 27.1
432 3 440 10.8 470 12.4 4 3.25” 3.5” 20” 2B 23.375” 20” 19.5625” 17.375” 10.5” 8.25” 273
&
5 705 18.1 760 19.7 1.75”
7½ 880 22.2 975 24.6
10 1200 29.0
Note: Though the dimensions are correct, the Pump may not be exactly as shown.