Professional Documents
Culture Documents
It is important to check and clean/change filters at regular intervals so that they are not clogged, as
this might lead to the fact that the filters will be subjected to overload, and that undesired matters or
particles leak from the conveyor.
A change of filter shall be made at least once every six months. Notice that changing/cleaning of filter
may be required at shorter intervals.
Dry cleaning
Brush the filter surface very gently by hand with a soft brush by nylon or PVC. Use maximum
5 N (1.12 lbf) as contact pressure.
A hard brush is NOT recommended since it will damage the membrane. Nor should the
dust/dirt be scraped off with any sharp/hard objects – this will also damage the membrane.
Wet cleaning
1
Specifications subject to change without notice
__________________________________________________________________________________
Ultrasonic cleaning
1 2
3 4
2
Specifications subject to change without notice