Professional Documents
Culture Documents
No Reference Title
E
D
C
Roberto Eduardo
B 05/09/07 H710W and H720W added SVAI Monn Weiss jr.
EX320296
Roberto Eduardo
A 23/04/07 FIRST ISSUE SVAI Monn Weiss jr.
EX320296
Contractor Contractor GERDAU AÇOMINAS
No Date Revision
Name Approved Approved By:
Sub. Contractor: Sub. Contractor Dwg. No
AND IT CANNOT BE COPIED TOTALLY OR PARTIALLY TRANSMITTED NOR USED
Checked by:
BY THIRD PARTIES, WITHOUT THE DULLY WRITEN AUTHORIZATION.
Approved by:
THIS DOCUMENT IS “GERDAU AÇOMINAS” PROPERTY
Checked by:
Mércio Heyder
Approved by:
Roberto E. Oliveira
Dwg. Title:
05/09/07
1 B 0 6 Z 0 1 - A - 1 0 0 3 - 0 0 1 - B A4
HE114 / 1GA
TABLE OF CONTENTS
for
Piping - Standard Page 2 of 4
VAI- Edition
Standard Designation Date
H 200 Butt - Welding Fittings acc.to ASME B16.9 and ASME B16.28 2001-07
H 210 Elbows DIN2605 / Part 1 and 2 2003-04
H 220A Mitre Bends acc. to AWWA C208 2000-06
H 230 Tees DIN2615 / Part 1 and 2 2005-01
H 234 Weldolets 91-04
H 237 Thredolets, Sockolets, Nipolets 87-12
H 239 Branch Reinforcements acc.to AD-Merkblatt B9 made from Pipe DIN2448/2458 97-02
H 239A Branch Reinforcements made from Pipe acc.to ASME / API 97-02
H 240 Reducers DIN2616 / Part 1 and 2 2003-04
H 250 Caps DIN2617 2003-04
H 280 Socket-Welding Steel Fittings, (Excerpt from ANSI B16.11) 91-01
H 287 Socket - Welding Steel Fittings for DIN-Tubing 98-10
Edition: B / 2007-09
HE114 / 1GA
Page 3 of 4
VAI- Edition
Standard Designation Date
H 800A Spectacle Blinds for ASME B16.5 - Flanges Class 150 - 1500 97-01
H 810 Spectacle Blinds PN6 - 63 for DIN-Pipelines 2006-10
Edition: B / 2007-09
HE114 / 1GA
Page 4 of 4
VAI- Edition
Standard Designation Date
Edition: B / 2007-09
Standard
Wall thickness - Series
for DIN - Components with ISO-Outside diameters H0010
Page 1 of 3
1) Scope
Wall thicknesses below shall be used for following components:
Pipes, Fittings and flanges etc. with an outside diameter or small hub diameter acc. to
series 1 of DIN 2448 resp. DIN 2458 or ENV 10220.
Further wall thicknesses see VAI-Std. H0019 for items with Non-ISO-Outside Diameters
Nomin. Outside
Wall thicknesses in mm for wall thickness code (3)
size diameter
DN mm (4) 1 2 3 4 5 6 7 8 9
6 10.2 1.4 1.0 1.2 2.0 2.3 2.9 3.2
8 13.5 1.0 1.2 1.4 1.6 1.6 2.0 2.3 2.9 3.2
10 17.2 1.0 1.2 1.4 1.6 2.0 2.3 2.9 3.6 -
15 21.3 1.0 1.2 1.4 1.6 2.0 2.3 2.9 3.6 -
20 26.9 1.2 1.4 1.6 2.0 2.3 2.9 3.2 4.0 -
25 33.7 1.2 1.4 1.6 2.0 2.6 3.2 4.0 4.5 5.0
32 42.4 1.2 1.4 1.6 2.0 2.6 3.2 4.0 4.5 5.0
40 48.3 1.2 1.6 2.0 2.3 2.6 2.9 4.5 5.0 5.6
50 60.3 1.2 1.6 2.0 2.3 2.9 3.2 4.5 5.6 (5.4)
65 76.1 - 1.6 2.0 2.6 2.9 3.2 4.5 5.6 (5.4)
80 88.9 1.6 2.0 2.6 2.9 3.2 3.6 4.5 5.6 6.3
100 114.3 1.6 2.0 2.6 3.2 3.6 4.5 5.0 6.3 7.1
125 139.7 1.6 2.0 3.2 3.6 4.0 4.5 5.6 6.3 7.1
150 168.3 1.6 2.0 3.2 4.0 4.5 5.6 6.3 7.1 8.0
(175) (193.7) 2.0 2.9 3.2 4.5 (5.4) (5.4) 6.3 7.1 8.0
200 219.1 2.0 2.9 3.2 4.5 5.6 (5.4) 6.3 7.1 8.0
250 273.0 2.9 3.2 4.0 5.0 5.6 (5.4) 6.3 8.8 10.0
300 323.9 2.9 3.2 4.0 5.0 5.6 6.3 7.1 10.0 11.0
350 355.6 2.9 3.2 4.0 5.0 5.6 7.1 8.0 10.0 11.0
400 406.4 3.2 4.0 5.0 6.3 7.1 8.0 8.8 11.0 12.5
450 457 3.2 4.0 5.0 6.3 7.1 8.0 8.8 11.0 12.5
500 508 3.2 4.0 5.0 6.3 8.0 10.0 11.0 12.5 14.2
600 610 3.2 4.5 5.6 6.3 8.0 8.8 10.0 12.5 14.2
700 711 4.0 5.0 5.6 7.1 8.8 10.0 11.0 14.2 16.0
800 813 4.0 5.0 6.3 8.0 10.0 12.5 14.2 16.0 17.5
900 914 5.0 6.3 8.8 10.0 11.0 12.5 14.2 16.0 17.5
1000 1016 5.0 6.3 10.0 12.5 14.2 16.0 17.5 20.0 22.2
1200 1220 6.3 8.0 12.5 14.2 16.0 17.5 20.0 22.2
1400 1420 7.1 8.8 14.2 16.0 17.5 20.0 22.2 25.0
1600 1620 8.0 10.0 16.0 17.5 20.0 22.2 25.0 28.0
1800 1820 8.8 10.0 17.5 20.0 22.2 25.0 28.0 30.0
2000 2020 10.0 11.0 20.0 22.2 25.0 28.0 30.0 32.0
2200 2220 10.0 11.0 20.0 22.2 25.0 28.0 30.0 32.0
Footnotes:
(1) Normal wall thickness (Std.-wall thickness) acc. to DIN 2448 from DN 6 - 600
(2) Normal wall thickness (Std.-wall thickness) acc. to DIN 2458 from DN 6 - 1000
(3) Wall thickness 5.4 mm is only covered by ISO 4200 and ENV 10220
(4) Outside diameters up to DN 1000 also refer to DIN 2458 / ISO 4200 or ENV 10220
Outside diameters DN 1200 to DN 2200 refer to DIN 2458
Outside diameters DN 2400 to DN 3000 refer to small hub diameter Series 1 of DIN 2631 or DIN 2632
( ) Diameters and wall thicknesses shall only be used exceptionally.
For C-Steel and low alloy steels use wall thickness code J and H for coding the normal wall thicknesses
acc. to DIN 2448 and DIN 2458
Page 2
Nomin. Outside
Wall thicknesses in mm for wall thickness code (3)
size diameter
DN mm (4) A B C D E F G H (2) J (1) K L M
6 10.2 1.6 1.6 1.8 2.6
8 13.5 1.8 1.8 2.6
10 17.2 4.0 4.5 1.8 1.8 1.6 2.6
15 21.3 4.0 4.5 5.0 2.0 2.0 1.6 2.6
20 26.9 - 4.5 5.0 5.6 2.0 2.3 1.6 2.6
25 33.7 2.9 3.6 - 5.6 6.3 7.1 2.0 2.6 1.6 2.3 -
32 42.4 2.9 3.6 - 5.6 6.3 7.1 2.3 2.6 2.0 2.3 -
40 48.3 3.2 3.6 4.0 6.3 7.1 8.0 2.3 2.6 2.0 - -
50 60.3 4.0 5.0 6.3 7.1 8.0 8.8 2.3 2.9 2.0 - 2.6
65 76.1 6.3 7.1 8.0 8.8 10.0 11.0 2.6 2.9 2.0 2.3 -
80 88.9 7.1 8.0 8.8 10.0 11.0 12.5 2.9 3.2 2.0 2.3 -
100 114.3 8.0 8.8 10.0 11.0 12.5 14.2 3.2 3.6 2.0 2.3 -
125 139.7 8.0 8.8 10.0 11.0 12.5 14.2 3.6 4.0 2.0 2.3 2.6
150 168.3 8.8 10.0 11.0 12.5 14.2 16.0 4.0 4.5 2.0 2.3 2.6
(175) (193.7) 8.8 10.0 11.0 12.5 14.2 16.0 4.5 5.6 2.6 2.3 2.6
200 219.1 8.8 10.0 11.0 12.5 14.2 16.0 4.5 6.3 2.6 2.3 3.6
250 273.0 11.0 12.5 14.2 16.0 17.5 20.0 2.0 5.0 6.3 2.6 2.3 3.6
300 323.9 12.5 14.2 16.0 17.5 20.0 22.2 2.0 5.6 7.1 2.9 3.6 4.5
350 355.6 12.5 14.2 16.0 17.5 20.0 22.2 2.0 5.6 8.0 2.9 3.6 4.5
400 406.4 14.2 16.0 17.5 20.0 22.2 25.0 2.0 6.3 8.8 3.2 3.6 4.5
450 457 14.2 16.0 17.5 20.0 22.2 25.0 6.3 8.8 3.2 3.6 4.5
500 508 16.0 17.5 20.0 22.2 25.0 28.0 6.3 11.0 3.2 3.6 4.5
600 610 16.0 17.5 20.0 22.2 25.0 28.0 5.0 6.3 12.5 4.0 3.6 -
700 711 17.5 20.0 22.2 25.0 28.0 30.0 5.0 7.1 - 4.0 4.5 -
800 813 20.0 22.2 25.0 28.0 30.0 32.0 5.0 8.0 - 4.0 4.5 5.6
900 914 20.0 22.2 25.0 28.0 30.0 32.0 5.0 10.0 - 5.0 5.6 7.1
1000 1016 25.0 28.0 30.0 32.0 36.0 40.0 5.0 10.0 - 5.0 5.6 7.1
1200 1220 25.0 28.0 30.0 32.0 36.0 40.0 6.3 11.0 12.5 5.6 - 7.1
1400 1420 28.0 30.0 32.0 36.0 40.0 7.1 11.0 12.5 5.6 6.3 8.0
1600 1620 30.0 32.0 36.0 40.0 8.0 11.0 12.5 6.3 7.1 8.8
1800 1820 32.0 36.0 40.0 8.8 12.5 14.2 7.1 8.0 11.0
2000 2020 36.0 40.0 10.0 12.5 14.2 8.0 8.8
2200 2220 36.0 40.0 12.5 14.2
2400 2420 14.2
2600 2620 16.0
2800 2820 16.0
3000 3020 17.5
Edition: 2007-01
H0010
Page 3
Nomin. Outside
Wall thicknesses in mm for wall thickness code (3)
size diameter
DN mm (4) N P Q R S T U V W Y Z
6 10.2
8 13.5 3.6
10 17.2 3.2
15 21.3 3.2
20 26.9 3.6
25 33.7 -
32 42.4 - 8.0 8.8 10,0
40 48.3 - 8.8 10.0 11,0
50 60.3 3.6 10.0 11.0 12.5 14,2
65 76.1 3.6 4.0 5.0 12.5 14.2 16.0 17,5
80 88.9 - 4.0 5.0 14.2 16.0 17.5 20,0
100 114.3 2.9 - 4.0 5.6 16.0 17.5 20.0 22.2 25.0
125 139.7 2.9 - 5.0 - 16.0 17.5 20.0 22.2 25.0 36.0 28,0
150 168.3 2.9 3.6 5.0 - 17.5 20.0 22.2 25.0 28.0 36,0 32,0
(175) (193.7) 3.6 4.0 5.0 5.6 17.5 20.0
200 219.1 4.0 5.0 - 30.0 17.5 20.0 22.2 25.0 28.0 32.0 36.0
250 273.0 4.5 - 7.1 8.0 22.2 25.0 28.0 30.0 32.0 36.0 45.0
300 323.9 40.0 50.0 8.0 8.8 25.0 30.0 28.0 32.0 36.0 45.0 2.6
350 355.6 45.0 6.3 8.8 55.0 25.0 30.0 28.0 32.0 36.0 2.3 2.6
400 406.4 5.6 - 60.0 10.0 28.0 30.0 32.0 36.0 40.0 2.6 2.9
450 457 5.6 - - 10.0
500 508 5.6 7.1 8.8 - 30.0 32.0 36.0 40.0 45.0
600 610 - 7.1 11.0 - 30.0 32.0 36.0 40.0 45.0
700 711 6.3 8.0 - 12.5 32.0 36.0 40.0 3.6
800 813 7.1 8.8 11.0 36.0 40.0
900 914 8.0 - - 36.0 40.0 4.0 4.5
1000 1016 8.0 8.8 11.0 4.0 4.5
1200 1220 8.8 10.0 4.0 4.5
1400 1420 10.0 - 5.0
1600 1620 - 14.2
1800 1820 - 16.0
2000 2020 16.0 17.5
2200 2220 16.0 17.5
Edition: 2007-01
Standard
Wall thickness - Series
H 0011
for ASME / ANSI / API – Piping Components
Page 1 of 2
1) Scope
Wall thicknesses below shall only be used for ASME-, ANSI-, MSS-, API- or SAE- components.
For purchasing components will be designated by existing Schedules, all other wall thicknesses
are given in mm.
diam. side 10 20 30 40 60 80 100 120 140 160 5S 10S 40S 80S Std. XS XXS
diam. Wall thicknesses in mm for wall thickness code
DN mm 0 1 2 3 4 5 6 7 8 9 A B C D E F G
1/8" 10.3 1.73 2.41 1.24 1.73 2.41 1.73 2.41
1/4" 13.7 2.24 3.02 1.65 2.24 3.02 2.24 3.02
3/8" 17.1 2.31 3.20 1.65 2.31 3.20 2.31 3.20
1/2" 21.3 2.77 3.73 4.78 1.65 2.11 2.77 3.73 2.77 3.73 7.47
3/4" 26.7 2.87 3.91 5.56 1.65 2.11 2.87 3.91 2.87 3.91 7.82
1" 33.4 3.38 4.55 6.35 1.65 2.77 3.38 4.55 3.38 4.55 9.09
1 1/4" 42.2 3.56 4.85 6.35 1.65 2.77 3.56 4.85 3.56 4.85 9.70
1 1/2" 48.3 3.68 5.08 7.14 1.65 2.77 3.68 5.08 3.68 5.08 10.15
2" 60.3 3.91 5.54 8.74 1.65 2.77 3.91 5.54 3.91 5.54 11.07
2 1/2" 73.0 5.16 7.01 9.53 2.11 3.05 5.16 7.01 5.16 7.01 14.02
3" 88.9 5.49 7.62 11.13 2.11 3.05 5.49 7.62 5.49 7.62 15.24
3 1/2" 101.6 5.74 8.08 2.11 3.05 5.74 8.08 5.74 8.08
4" 114.3 6.02 8.56 11.13 13.49 2.11 3.05 6.02 8.56 6.02 8.56 17.12
5" 141.3 6.55 9.53 12.70 15.88 2.77 3.40 6.55 9.53 6.55 9.53 19.05
6" 168.3
.
7.11 10.97 14.27 18.26 2.77 3.40 7.11 10.97 7.11 10.97 21.95
8" 219.1 6.35 7.04 8.18 10.31 12.70 15.09 18.26 20.62 23.01 2.77 3.76 8.18 12.70 8.18 12.70 22.23
10" 273.0 6.35 7.80 9.27 12.70 15.09 18.26 21.44 25.40 28.58 3.40 4.19 9.27 12.70 9.27 12.70 25.40
12" 323.9 6.35 8.38 10.31 14.27 17.47 21.44 25.40 28.58 33.32 3.96 4.57 9.53 12.70 9.53 12.70 25.40
14" 355.6 6.35 7.92 9.53 11.13 15.09 19.05 23.83 27.79 31.75 35.71 3.96 4.78 9.53 12.70
16" 406.4 6.35 7.92 9.53 12.70 16.66 21.44 26.19 30.96 36.53 40.49 4.19 4.78 9.53 12.70
18" 457 6.35 7.92 11.13 14.27 19.05 23.83 29.36 34.93 39.67 45.24 4.19 4.78 9.53 12.70
20" 508 6.35 9.53 12.70 15.09 20.62 26.19 32.54 38.10 44.45 50.01 4.78 5.56 9.53 12.70
22" 559 6.35 9.53 12.70 22.23 28.58 34.93 41.28 47.63 53.98 4.78 5.56 9.53 12.70
24" 610 6.35 9.53 14.27 17.48 24.61 30.96 38.89 46.02 52.37 59.54 5.54 6.35 9.53 12.70
26" 660 7.92 12.70 9.53 12.70
28" 711 7.92 12.70 15.88 9.53 12.70
30" 762 7.92 12.70 15.88 6.35 7.92 9.53 12.70
32" 813 7.92 12.70 15.88 17.48 9.53 12.70
34" 864 7.92 12.70 15.88 17.48 9.53 12.70
36" 914 7.92 12.70 15.88 19.05 9.53 12.70
38" 965 9.53 12.70
40" 1016 9.53 12.70
42" 1067 9.53 12.70
44" 1118 9.53 12.70
46" 1168 9.53 12.70
48" 1219 9.53 12.70
52“ 1321
56" 1422
60“ 1524
64" 1626
The contentof this sheet is our copyright. The unauthorize d use of this documentation or use contrary to its intended purpose is not permitted and shall be prosecuted.
3/4" 26.7
1" 33.4
1 1/4" 42.2
1 1/2" 48.3
2" 60.3
2 1/2" 73.0
3" 88.9
3 1/2" 101.6
4" 114.3 10.31
5" 141.3 10.31
6" 168.3 10.31 25.40
8" 219.1 10.31 31.75
10" 273.0 10.31 36.53
12" 323.9 7.92 10.31 45.24
14" 355.6 10.31
16" 406.4 10.31 11.13
18" 457 10.31
20" 508 7.92 8.74 10.31 11.13
22" 559 7.92 10.31
24" 610 7.92 10.31 11.13
26" 660 10.31 17.48 25.40
28" 711 10.31 11.13 14.27 17.48 19.05 20.62 22.23 25.40
30" 762 10.31 11.13 14.27 17.48 19.05 20.62 22.23 25.40
32" 813 10.31 11.13 14.27 19.05 20.62 22.23 25.40
34" 864 10.31 11.13 14.27 19.05 20.62 22.23 25.40
36" 914 10.31 11.13 14.27 17.48 20.62 22.23 25.40
38" 965 7.92 8.74 10.31 11.13 11.91 14.27 15.88 17.48 19.05 20.62 22.23 25.40
40" 1016 7.92 8.74 10.31 11.13 11.91 14.27 15.88 17.48 19.05 20.62 22.23 25.40
42" 1067 8.74 10.31 11.13 11.91 14.27 15.88 17.48 19.05 20.62 22.23 25.40
44" 1118 8.74 10.31 11.13 11.91 14.27 15.88 17.48 19.05 20.62 22.23 25.40
46" 1168 8.74 10.31 11.13 11.91 14.27 15.88 17.48 19.05 20.62 22.23 25.40
48" 1219 8.74 10.31 11.13 11.91 14.27 15.88 17.48 19.05 20.62 22.23 25.40
52“ 1321 9.53 10.31 11.13 11.91 12.70 14.27 15.88 17.48 19.05 20.62 22.23 25.40
56" 1422 9.53 10.31 11.13 11.91 12.70 14.27 15.88 17.48 19.05 20.62 22.23 25.40
60“ 1524 9.53 10.31 11.13 11.91 12.70 14.27 15.88 17.48 19.05 20.62 22.23 25.40
64" 1626 9.53 10.31 11.13 11.91 12.70 14.27 15.88 17.48 19.05 20.62 22.23 25.40
68“ 1727 11.91 12.70 14.27 15.88 17.48 19.05 20.62 22.23 25.40
72“ 1829 9.53 10.31 11.13 11.91 12.70 14.27 15.88 17.48 19.05 20.62 22.23 25.40
76“ 1930 12.70 14.27 15.88 17.48 19.05 20.62 22.23 25.40
80“ 2032 9.53 10.31 11.13 11.91 12.70 14.27 15.88 17.48 19.05 20.62 22.23 25.40
Wall thicknesses above the bold line are taken from API 5L or ASME B36.10,
Wall thicknesses below this line are chosen optionally.
Edition: 2007-04
Standard
Steel Pipes
acc. to ASME B36.10 / ASME B36.19 / API 5L 9) H 100
Page 1 of 18
Example of Designation of a seamless pipe of size 6" and wall thickness Schedule 40, random length
Designation: with welding bevel acc. to ASME B16.25, material: ASTM A106 Gr.A
Partnumber
11122C302 6" / 168,3 x 7,11 PIPE SEAMLESS W. WELDING ASTM A106 GR.A
BEVEL SCHED.40 H100/ASME B36.10
Page 2
1) Materials:
All materials correspond with specified ASTM- resp. API-standards.
Appropriate quality factors shall be taken from table on page 3.
7) PEC = allowable working pressure for pipe made of ASTM A53 Gr.B, welded (Type E)
PES = allowable working pressure for pipe made of ASTM A312 Gr.TP304, welded (Type EFW)
A hyphen in column PEC indicates that this wall thickness is not standardized by ASME B36.10.
8) For threaded pipes material ASTM A53 shall preferably be used with end preparation code 7.
9) Outside diameters acc. to API 5L are equal with the nominal size for sizes ³ 2 3/8",
outside diameters acc. to ASME B36.10 are equal with the nominal size for sizes ³ 14".
This may lead to confusion for sizes 3 1/2" and 4".
For other sizes outside diameters acc. to ASME and API 5L are either equal
(³ 14" and £ 1 1/2") or are designated differently.
Size designations in computer print outs only follow ASME B36.10.
Examples: Nom. size O.D. Nom. size O.D. Nom. size O.D.
API 5L 2 3/8" 2 3/8" 3.5" 3.5" 4" 4"
ASME B36.10 2" 2 3/8" 3" 3.5" 4" 4.5"
10) Standard certificates acc. to corresponding ASTM-/ASME- resp. API-Standards (i.e. no test report).
11) For piping components with end coding H a "certified test report" acc. to ASTM A530 shall be provided.
Edition: 2007-04
H 100
Page 3
Quality factors E and allowable stress acc. to ASME B31.3 and correction factors K for allowable working pressure
at ambient temperatures up to 38°C for several materials.
- For other materials or types of pipe (Classes) quality factor E shall be taken from table A-1B of ASME B31.3.
- Correction factors comprise the ratios of allowable stresses S and quality factor E and are derived as follows :
S E S E
K = ¾¾ . ¾¾ for carbon steel and alloy steel; K = ¾¾ . ¾¾ for stainless steel
SC EC SS ES
S = allowable stress in ksi for concerning material acc. to ASME B31.3, table A-1
SC = allowable stress for A 53 Gr.B = 20.0 ksi, SS = 20.0 ksi for A 312 Gr.TP304
E = quality factor for concerning material
EC = quality factor for A 53 Gr.B, Type E = 0.85;
ES = quality factor for A 312 Gr.TP304 = 0.85
- Conversion examples:
a) What is the value of the allowable working pressure at 20°C for ERW-pipe 6" x Sched. 40 material ASTM A 333 Gr.1?
Result : PEC = 70.74 bar
K = 0.915
PEC (A 333 Gr.1) = 70.74 x 0.915 = 64.72 bar
b) What is the value of the allowable working pressure at 20°C for EFW-pipe 10" x Sched. 10S
material ASTM A 312 Gr.TP304L?
Result : PES = 31.88 bar
K = 0.835
PES (A 312 Gr.TP304L) = 31.88 x 0.835 = 26.62 bar
Edition: 2007-04
H 100
Page 4
Index Formulas
DN mm Nominal diameter
DA mm Outside diameter
WD mm Wall thickness
p DA4 - DI4
W cm3 Sectional modulas W = ¾ . ¾¾¾¾ . 10-3
32 DA
p
JA cm4 Moment of inertia JA = ¾ . (DA4 - DI4).10 -4
64
100 - C1,C
SVC mm Mathematical wall thickness for C-steel SVC = ¾¾¾¾¾ . WD - C2,C
100
100 - C1,S
SVS mm Mathematical wall thickness for stainless steel SVS = ¾¾¾¾¾ . WD - C2,S
100
Edition: 2007-04
H 100
Page 5
Edition: 2007-04
H 100
Page 6
Edition: 2007-04
H 100
Page 7
Edition: 2007-04
H 100
Page 8
Edition: 2007-04
H 100
Page 9
Edition: 2007-04
H 100
Page 10
Edition: 2007-04
H 100
Page 11
Edition: 2007-04
H 100
Page 12
Edition: 2007-04
H 100
Page 13
Edition: 2007-04
H 100
Page 14
Edition: 2007-04
H 100
Page 15
Edition: 2007-04
H 100
Page 18
DA 7) 7)
DN WD Sched. Cd. Fi FR W JA GR GW GS PEC PES
mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
52" 1321.0
9.53 K 13312.87 392.65 12781.39 844210.60 308.23 1331.29 1639.51 12.60 14.88
10.31 L 13280.99 424.53 13802.97 911686.20 333.26 1328.10 1661.36 13.82 16.10
11.13 M 13247.51 458.01 14872.99 982360.73 359.54 1324.75 1684.29 15.11 17.39
11.91 N 13215.71 489.81 15887.05 1049339.71 384.50 1321.57 1706.07 16.33 18.62
12.70 P 13183.53 521.99 16910.39 1116931.54 409.76 1318.35 1728.11 17.58 19.86
14.27 Q 13119.71 585.81 18933.04 1250527.46 459.86 1311.97 1771.83 20.05 22.33
15.88 R 13054.42 651.10 20991.97 1386519.59 511.12 1305.44 1816.56 22.58 24.87
17.48 S 12989.69 715.83 23022.88 1520661.32 561.93 1298.97 1860.89 25.11 27.40
19.05 T 12926.34 779.18 25001.03 1651318.14 611.66 1292.63 1904.29 27.59 29.89
20.62 U 12863.14 842.38 26964.71 1781019.10 661.27 1286.31 1947.58 30.08 32.38
22.23 V 12798.49 907.03 28963.46 1913036.73 712.02 1279.85 1991.87 32.63 34.94
23.83 12734.40 971.12 30934.87 2043248.36 762.33 1273.44 2035.77 35.17 37.49
25.40 W 12671.68 1033.84 32854.93 2170067.83 811.57 1267.17 2078.73 37.67 39.99
26.97 12609.10 1096.42 34760.79 2295950.26 860.69 1260.91 2121.60 40.18 42.50
28.58 12545.10 1160.42 36700.55 2424071.59 910.93 1254.51 2165.44 42.75 45.07
30.18 12481.65 1223.87 38613.64 2550430.65 960.74 1248.17 2208.90 45.31 47.64
31.75 12419.55 1285.97 40476.74 2673488.65 1009.49 1241.96 2251.44 47.83 50.16
56" 1422.0
9.53 K 15458.53 422.88 14833.40 1054654.61 331.96 1545.85 1877.82 11.70 13.82
10.31 L 15424.17 457.24 16021.02 1139094.43 358.94 1542.42 1901.35 12.84 14.95
11.13 M 15388.09 493.32 17265.27 1227560.97 387.26 1538.81 1926.07 14.03 16.15
11.91 N 15353.81 527.60 18444.78 1311424.00 414.17 1535.38 1949.55 15.17 17.29
12.70 P 15319.12 562.29 19635.39 1396076.54 441.39 1531.91 1973.31 16.32 18.44
14.27 Q 15250.32 631.09 21989.58 1563459.30 495.41 1525.03 2020.44 18.61 20.74
15.88 R 15179.92 701.49 24387.28 1733935.46 550.67 1517.99 2068.66 20.97 23.09
17.48 S 15110.12 771.29 26753.63 1902183.28 605.46 1511.01 2116.48 23.31 25.44
19.05 T 15041.78 839.63 29059.75 2066148.40 659.11 1504.18 2163.29 25.61 27.75
20.62 U 14973.60 907.81 31350.23 2229001.23 712.63 1497.36 2209.99 27.92 30.06
22.23 V 14903.84 977.57 33682.89 2394853.29 767.39 1490.38 2257.77 30.29 32.43
23.83 14834.68 1046.73 35984.91 2558527.00 821.68 1483.47 2305.15 32.65 34.79
25.40 W 14766.97 1114.44 38228.19 2718024.35 874.83 1476.70 2351.53 34.97 37.11
26.97 14699.42 1181.99 40456.11 2876429.71 927.86 1469.94 2397.81 37.29 39.44
28.58 14630.30 1251.11 42724.92 3037742.05 982.12 1463.03 2445.15 39.67 41.82
30.18 14561.78 1319.63 44963.79 3196925.33 1035.91 1456.18 2492.09 42.05 44.20
31.75 14494.70 1386.71 47145.38 3352036.79 1088.57 1449.47 2538.04 44.38 46.54
60" 1524.0
9.53 K 17788.05 453.42 17060.71 1300025.91 355.94 1778.80 2134.74 10.92 12.89
10.31 L 17751.19 490.28 18428.69 1404266.46 384.87 1775.12 2159.99 11.97 13.95
11.13 M 17712.48 528.99 19862.25 1513503.35 415.26 1771.25 2186.50 13.09 15.06
11.91 N 17675.70 565.77 21221.52 1617080.03 444.13 1767.57 2211.70 14.15 16.12
12.70 P 17638.49 602.98 22593.91 1721655.76 473.34 1763.85 2237.19 15.22 17.20
14.27 Q 17564.65 676.82 25308.45 1928503.86 531.30 1756.46 2287.77 17.36 19.34
15.88 R 17489.09 752.38 28074.45 2139273.10 590.62 1748.91 2339.53 19.55 21.54
17.48 S 17414.16 827.31 30805.59 2347385.85 649.44 1741.42 2390.85 21.74 23.72
19.05 T 17340.80 900.67 33468.46 2550296.42 707.03 1734.08 2441.11 23.89 25.87
20.62 U 17267.59 973.88 36114.50 2751924.69 764.50 1726.76 2491.26 26.04 28.03
22.23 V 17192.67 1048.80 38810.55 2957363.93 823.31 1719.27 2542.58 28.24 30.24
23.83 17118.38 1123.09 41472.48 3160202.62 881.63 1711.84 2593.46 30.44 32.44
25.40 W 17045.64 1195.83 44067.72 3357960.09 938.73 1704.56 2643.29 32.60 34.60
26.97 16973.05 1268.41 46646.42 3554457.10 995.71 1697.31 2693.01 34.76 36.76
28.58 16898.78 1342.69 49273.71 3754656.96 1054.01 1689.88 2743.89 36.98 38.99
30.18 16825.13 1416.34 51867.60 3952311.45 1111.83 1682.51 2794.34 39.19 41.20
31.75 16753.02 1488.45 54396.38 4145003.83 1168.44 1675.30 2843.74 41.37 43.38
Edition: 2007-04
H 100
Page 17
Edition: 2007-04
H 100
Page 18
Edition: 2007-04
Standard
Seamless Pipes
acc. to DIN2448 / DIN2462 (ISO1127) H 110
Page 1 of 10
Example of Designation of a seamless pipe with 76,1 mm outside diameter and 4,0 mm wallthickness,
Designation: finish c2 or h, manufacturing length with welding bevel, with certificate 3.1B, material: 1.4541
Partnumber
111272Q01 76,1 x 4,0 PIPE SEAMLESS BEVLD.ENDS 1.4541
H110/DIN2462/DIN17458 CERT:3.1B
Partnumbering Code
Page 2
1) Materials:
Stainless steels acc. to DIN17458 (3.1B) / DIN17456 (2.2)
St35.8 / 15Mo3 / 13CrMo44 / 10CrMo9.10 / X20CrMoV12.1 acc. to DIN17175
TTSt35N / TTSt35V / 10Ni14 acc. to DIN17173
TStE255 / TStE285 / TStE355 acc. to DIN17179
StE240.7 acc. to DIN17172 (or L245NB acc. to EN10208-2)
12CrMo19.5V1 acc. to DIN17176
St37.0 acc. to DIN1629
St37.4 / St52.4 acc. to DIN1630
1.4878 acc. to SEW 470
1.4462 / 1.4539 acc. to DIN EN10088
2) With corrosion test acc. to ISO 3651/I or ASTM A262 practice C (HUEY-test).
3) With corrosion test acc. to ISO 3651/II (STRAUSS-test) or ASTM A262 practice E.
4) Wallthickness code acc. to VAI-Std. H0010.
5) Code for surface finish;
Surface finish with:
Code 3 - 9: in accordance with order.
Code S: outside metallic, inside free of scale, rust, oil and grease, closed with lid, with drying agent-bag,
prepared for oxygen service.
Code A: inside phosphated and oiled acc. to manufacturer´s option, however 5 g/m² Znph min.
acc. to DIN50942, outside metallic.
Code E, N, V: coating acc. to DIN30673 rep. DIN30670.
6) Code for end preparation;
Welding bevel acc. to DIN2559.
Ident No. 1 £ 3 mm wallthickness, Ident No. 22 £ 16 mm, Ident. No 3 > 16 mm.
7) Stainless steel pipes acc. to DIN2462 or ISO 1127: Tolerance class D2 / T3.
Seaml. stainless steel pipes ³ DN 150 shall be avoided.
Finish for pipes acc. to DIN17458: c2 or h with inspection certificate 3.1B.
DIN17456: c1 or m with works report 2.2.
8) Seamless pipes made of carbon steel or alloy steel are only available with
minimum wallthickness (normal wallthickness DIN2448).
Edition: 2003-04
H 110
Page 3
Material code 78 79 NJ NK NL
Material X2CrNiMo17.13.2 X2CrNiMo18.14.3 X2CrNiMoN22.5.3 X2CrNiMoN17.13.5 X1NiCrMoCuN25.20.5
Material No. 1.4404 1.4435 1.4462 1.4439 1.4539
Certificate 3.1B 3.1B 3.1B 3.1B 3.1B
Correction 0,978 1,043 1,95 1,369 1.086
factor A
Edition: 2003-04
H 110
Page 4
Index Formulas
DN mm Nominal diameter
Da mm Outside diameter
Wallth. Cd. Wallthickness code acc. to VAI-Std. H0010
s mm Wallthickness
2
Di . p
Fi cm2 Cross section Fi = ¾¾¾ . 10 -2
4
p Da4 _ Di4
W cm3 Sectional modulas W = ¾ . ¾¾¾¾ . 10-3
32 Da
p
J cm4 Moment of interia J=¾ . ( Da4 - Di4 ).10 -4
64
GR kg/m Weight of pipe / m GR = FR . 0,785
Di mm Inside diameter Di = Da - 2 . s
100 - c1
sv mm Wallthickness for calculation sv = s . ¾¾¾¾ - c2
100
Edition: 2003-04
H 110
Page 5
Seamless Pipes: Excerpt from DIN2448 and DIN2462 also DIN EN10220
W e i g h t s 10)
Pipe Water- Summary
filling GR+G 12) 9) 12)
W
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
10 17,2 1,0 1 1,81 0,51 0,19 0,17 0,40 0,18 0,58 - 160,47
1,2 2 1,72 0,60 0,23 0,19 0,47 0,17 0,65 - 192,56
1,6 K 1,54 0,78 0,28 0,24 0,62 0,15 0,77 - 256,74
1,8 J 1,45 0,87 0,30 0,26 0,68 0,15 0,83 295,12 -
2,0 5 1,37 0,96 0,33 0,28 0,75 0,14 0,89 327,91 320,93
2,3 6 1,25 1,08 0,36 0,31 0,85 0,12 0,97 377,09 369,07
2,6 M 1,13 1,19 0,38 0,33 0,94 0,11 1,05 426,28 417,21
2,9 7 1,02 1,30 0,40 0,35 1,02 0,10 1,12 475,47 465,35
3,2 P 0,92 1,41 0,42 0,36 1,10 0,09 1,20 524,65 -
3,6 8 0,79 1,54 0,44 0,38 1,21 0,08 1,29 590,23 -
15 21,3 1,0 1 2,93 0,64 0,31 0,33 0,50 0,29 0,79 - 129,58
1,2 2 2,81 0,76 0,36 0,38 0,59 0,28 0,88 - 155,49
1,6 K 2,57 0,99 0,45 0,48 0,78 0,26 1,03 - 207,32
2,0 5,J 2,35 1,21 0,54 0,57 0,95 0,24 1,19 264,79 259,15
2,3 6 2,19 1,37 0,59 0,63 1,08 0,22 1,30 304,51 298,03
2,6 M 2,04 1,53 0,64 0,68 1,20 0,20 1,40 344,23 336,90
2,9 7 1,89 1,68 0,68 0,73 1,32 0,19 1,50 383,94 375,77
3,2 P 1,74 1,82 0,72 0,77 1,43 0,17 1,60 423,66 414,65
3,6 8 1,56 2,00 0,77 0,82 1,57 0,16 1,73 476,62 466,48
4,0 C 1,39 2,17 0,80 0,86 1,71 0,14 1,85 529,58 -
4,5 D 1,19 2,38 0,84 0,90 1,86 0,12 1,98 595,77 -
20 26,9 1,0 - 4,87 0,81 0,51 0,68 0,64 0,49 1,13 - 102,60
1,2 1 4,71 0,97 0,60 0,80 0,76 0,47 1,23 - 123,12
1,6 K 4,41 1,27 0,76 1,02 1,00 0,44 1,44 - 164,16
2,0 4 4,12 1,56 0,91 1,22 1,23 0,41 1,64 - 205,20
2,3 J 3,91 1,78 1,01 1,36 1,40 0,39 1,79 241,12 235,99
2,6 M 3,70 1,98 1,10 1,48 1,56 0,37 1,93 272,57 266,77
2,9 6 3,50 2,19 1,19 1,60 1,72 0,35 2,07 304,01 297,55
3,2 7 3,30 2,38 1,27 1,70 1,87 0,33 2,20 335,46 328,33
3,6 P 3,05 2,64 1,36 1,83 2,07 0,30 2,37 377,40 369,37
4,0 8 2,81 2,88 1,45 1,94 2,26 0,28 2,54 419,33 410,41
4,5 D 2,52 3,17 1,54 2,07 2,49 0,25 2,74 471,75 461,71
5,0 E 2,24 3,44 1,61 2,17 2,70 0,22 2,92 524,16 -
5,6 F 1,94 3,75 1,69 2,27 2,94 0,19 3,14 587,06 -
25 33,7 1,0 - 7,89 1,03 0,82 1,37 0,81 0,79 1,60 - 81,90
1,2 1 7,69 1,23 0,96 1,62 0,96 0,77 1,73 - 98,28
1,6 K 7,31 1,61 1,24 2,08 1,27 0,73 2,00 - 131,04
2,0 4 6,93 1,99 1,49 2,51 1,56 0,69 2,26 - 163,80
2,3 L 6,65 2,27 1,67 2,81 1,78 0,67 2,45 - 188,37
2,6 J 6,38 2,54 1,84 3,09 1,99 0,64 2,63 217,57 212,94
2,9 A 6,11 2,81 1,99 3,36 2,20 0,61 2,81 242,67 237,51
3,2 6 5,85 3,07 2,14 3,60 2,41 0,59 2,99 267,77 262,08
3,6 B 5,52 3,40 2,32 3,91 2,67 0,55 3,22 301,25 294,84
4,0 7 5,19 3,73 2,49 4,19 2,93 0,52 3,45 334,72 327,60
4,5 8 4,79 4,13 2,67 4,50 3,24 0,48 3,72 376,56 368,55
5,0 9 4,41 4,51 2,84 4,78 3,54 0,44 3,98 418,40 409,50
5,6 D 3,98 4,94 3,01 5,07 3,88 0,40 4,28 468,61 458,63
6,3 E 3,50 5,42 3,18 5,36 4,26 0,35 4,61 527,18 -
7,1 F 2,99 5,93 3,34 5,62 4,66 0,30 4,96 594,12 -
Edition: 2003-04
H 110
Page 6
W e i g h t s 10)
Pipe Water- Summary
filling GR+G 12) 9) 12)
W
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
32 42,4 1,0 - 12,82 1,30 1,32 2,79 1,02 1,28 2,30 - 65,09
1,2 1 12,57 1,55 1,56 3,30 1,22 1,26 2,48 - 78,11
1,6 3 12,07 2,05 2,02 4,27 1,61 1,21 2,82 - 104,15
2,0 K 11,58 2,54 2,45 5,19 1,99 1,16 3,15 - 130,19
2,3 L 11,22 2,90 2,76 5,84 2,27 1,12 3,40 - 149,72
2,6 J 10,87 3,25 3,05 6,46 2,55 1,09 3,64 172,92 169,25
2,9 A 10,52 3,60 3,33 7,06 2,82 1,05 3,88 192,88 188,77
3,2 6 10,18 3,94 3,59 7,62 3,09 1,02 4,11 212,83 208,30
3,6 B 9,73 4,39 3,93 8,33 3,44 0,97 4,42 239,43 234,34
4,0 7 9,29 4,83 4,24 8,99 3,79 0,93 4,72 266,04 260,38
4,5 8 8,76 5,36 4,60 9,76 4,21 0,88 5,08 299,29 292,92
5,0 9 8,24 5,87 4,93 10,46 4,61 0,82 5,44 332,55 325,47
5,6 D 7,65 6,47 5,29 11,21 5,08 0,76 5,85 372,45 364,53
6,3 E 6,97 7,14 5,66 11,99 5,61 0,70 6,31 419,01 410,09
7,1 F 6,25 7,87 6,02 12,76 6,18 0,62 6,81 472,22 462,17
8,0 S 5,47 8,65 6,36 13,48 6,79 0,55 7,33 532,08 -
8,8 T 4,83 9,29 6,61 14,01 7,29 0,48 7,77 585,28 -
40 48,3 1,0 - 16,84 1,49 1,72 4,16 1,17 1,68 2,85 - 57,14
1,2 1 16,55 1,78 2,04 4,93 1,39 1,65 3,05 - 68,57
1,6 2 15,98 2,35 2,65 6,41 1,84 1,60 3,44 - 91,43
2,0 K 15,41 2,91 3,23 7,81 2,28 1,54 3,82 - 114,29
2,3 4 15,00 3,32 3,65 8,81 2,61 1,50 4,11 - 131,43
2,6 J 14,59 3,73 4,05 9,78 2,93 1,46 4,39 151,80 148,57
2,9 6 14,19 4,14 4,43 10,70 3,25 1,42 4,67 169,32 165,71
3,2 A 13,79 4,53 4,80 11,59 3,56 1,38 4,94 186,83 182,86
3,6 B 13,27 5,06 5,26 12,71 3,97 1,33 5,30 210,19 205,71
4,0 C 12,76 5,57 5,70 13,77 4,37 1,28 5,65 233,54 228,57
4,5 7 12,13 6,19 6,21 15,01 4,86 1,21 6,07 262,73 257,14
5,0 8 11,52 6,80 6,69 16,15 5,34 1,15 6,49 291,93 285,71
5,6 9 10,81 7,51 7,21 17,42 5,90 1,08 6,98 326,96 320,00
6,3 D 10,01 8,31 7,76 18,74 6,53 1,00 7,53 367,83 360,00
7,1 E 9,13 9,19 8,31 20,08 7,21 0,91 8,13 414,53 405,71
8,0 F 8,19 10,13 8,85 21,37 7,95 0,82 8,77 467,08 457,14
8,8 S 7,40 10,92 9,26 22,35 8,57 0,74 9,31 513,79 -
10,0 T 6,29 12,03 9,76 23,57 9,45 0,63 10,07 583,85 -
50 60,3 1,0 - 26,69 1,86 2,72 8,19 1,46 2,67 4,13 - 45,77
1,2 1 26,33 2,23 3,23 9,73 1,75 2,63 4,38 - 54,93
1,6 2 25,61 2,95 4,22 12,72 2,32 2,56 4,88 - 73,23
2,0 K 24,89 3,66 5,17 15,58 2,88 2,49 5,36 - 91,54
2,3 4 24,37 4,19 5,85 17,65 3,29 2,44 5,73 - 105,27
2,6 M 23,84 4,71 6,52 19,65 3,70 2,38 6,08 - 119,00
2,9 J 23,33 5,23 7,16 21,59 4,11 2,33 6,44 135,62 132,74
3,2 6 22,82 5,74 7,78 23,47 4,51 2,28 6,79 149,65 146,47
3,6 P 22,15 6,41 8,58 25,87 5,03 2,21 7,25 168,36 164,78
4,0 A 21,48 7,07 9,34 28,17 5,55 2,15 7,70 187,06 183,08
4,5 7 20,67 7,89 10,25 30,90 6,19 2,07 8,26 210,45 205,97
5,0 B 19,87 8,69 11,10 33,48 6,82 1,99 8,81 233,83 228,86
5,6 8 18,93 9,62 12,06 36,37 7,55 1,89 9,45 261,89 256,32
6,3 C 17,87 10,69 13,10 39,49 8,39 1,79 10,18 294,63 288,36
7,1 D 16,69 11,87 14,17 42,73 9,32 1,67 10,98 332,04 324,98
8,0 E 15,41 13,14 15,25 45,99 10,32 1,54 11,86 374,13 366,17
8,8 F 14,32 14,24 16,11 48,58 11,18 1,43 12,61 411,54 402,79
10,0 S 12,76 15,80 17,23 51,95 12,40 1,28 13,68 467,66 457,71
11,0 T 11,52 17,04 18,02 54,34 13,37 1,15 14,53 514,43 -
12,5 U 9,79 18,77 19,00 57,28 14,74 0,98 15,71 584,58 -
*) see page 5
Edition: 2003-04
H 110
Page 7
W e i g h t s 10)
Pipe Water- Summary
filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
65 76,1 1,6 2 41,74 3,74 6,83 25,99 2,94 4,17 7,11 - 58,03
2,0 K 40,83 4,66 8,40 31,98 3,65 4,08 7,74 - 72,54
2,3 L 40,15 5,33 9,55 36,34 4,19 4,02 8,20 - 83,42
2,6 4 39,48 6,00 10,67 40,59 4,71 3,95 8,66 - 94,30
2,9 J 38,82 6,67 11,76 44,74 5,24 3,88 9,12 107,46 105,18
3,2 6 38,16 7,33 12,82 48,78 5,75 3,82 9,57 118,58 116,06
3,6 P 37,28 8,20 14,19 54,01 6,44 3,73 10,17 133,40 130,57
4,0 Q 36,42 9,06 15,52 59,06 7,11 3,64 10,75 148,23 145,07
4,5 7 35,36 10,12 17,11 65,12 7,95 3,54 11,48 166,75 163,21
5,0 R 34,32 11,17 18,64 70,92 8,77 3,43 12,20 185,28 181,34
5,6 8 33,08 12,40 20,38 77,54 9,74 3,31 13,04 207,52 203,10
6,3 A 31,67 13,81 22,29 84,82 10,84 3,17 14,01 233,46 228,49
7,1 B 30,09 15,39 24,33 92,56 12,08 3,01 15,09 263,10 257,50
8,0 C 28,37 17,12 26,44 100,59 13,44 2,84 16,27 296,45 290,14
8,8 D 26,88 18,61 28,16 107,14 14,61 2,69 17,29 326,10 319,16
10,0 E 24,72 20,77 30,49 116,01 16,30 2,47 18,77 370,57 362,68
11,0 F 22,99 22,50 32,22 122,58 17,66 2,30 19,96 407,62 398,95
12,5 S 20,51 24,98 34,47 131,16 19,61 2,05 21,66 463,21 453,35
14,2 T 17,87 27,61 36,59 139,22 21,68 1,79 23,46 526,20 -
16,0 U 15,27 30,21 38,39 146,06 23,71 1,53 25,24 592,90 -
80 88,9 1,6 1 57,68 4,39 9,41 41,82 3,44 5,77 9,21 - 49,67
2,0 K 56,61 5,46 11,60 51,57 4,29 5,66 9,95 - 62,09
2,3 L 55,81 6,26 13,21 58,70 4,91 5,58 10,49 - 71,41
2,6 3 55,02 7,05 14,78 65,68 5,53 5,50 11,04 - 80,72
2,9 4 54,24 7,84 16,31 72,52 6,15 5,42 11,57 - 90,03
3,2 J 53,46 8,62 17,82 79,21 6,76 5,35 12,11 101,51 99,35
3,6 6 52,42 9,65 19,77 87,90 7,57 5,24 12,82 114,20 111,77
4,0 Q 51,40 10,67 21,67 96,34 8,38 5,14 13,52 126,88 124,18
4,5 7 50,14 11,93 23,97 106,54 9,37 5,01 14,38 142,74 139,71
5,0 R 48,89 13,18 26,18 116,37 10,35 4,89 15,23 158,61 155,23
5,6 8 47,42 14,65 28,73 127,69 11,50 4,74 16,25 177,64 173,86
6,3 9 45,72 16,35 31,55 140,24 12,83 4,57 17,41 199,84 195,59
7,1 A 43,83 18,25 34,59 153,76 14,32 4,38 18,71 225,22 220,43
8,0 B 41,74 20,33 37,79 167,97 15,96 4,17 20,13 253,77 248,37
8,8 C 39,93 22,14 40,44 179,74 17,38 3,99 21,38 279,15 273,21
10,0 D 37,28 24,79 44,09 195,98 19,46 3,73 23,19 317,21 310,46
11,0 E 35,15 26,92 46,86 208,28 21,13 3,52 24,65 348,93 341,51
12,5 F 32,07 30,00 50,57 224,76 23,55 3,21 26,76 396,51 388,08
14,2 S 28,75 33,32 54,18 240,84 26,16 2,87 29,03 450,44 440,85
16,0 T 25,43 36,64 57,40 255,15 28,77 2,54 31,31 507,54 -
17,5 U 22,82 39,25 59,66 265,17 30,81 2,28 33,10 531,50 -
100 114,3 2,0 2 95,55 7,06 19,47 111,27 5,54 9,56 15,09 - 48,29
2,3 L 94,52 8,09 22,21 126,95 6,35 9,45 15,80 - 55,54
2,6 3 93,48 9,12 24,91 142,37 7,16 9,35 16,51 - 62,78
2,9 N 92,46 10,15 27,57 157,55 7,97 9,25 17,21 - 70,03
3,2 4 91,44 11,17 30,18 172,47 8,77 9,14 17,91 - 77,27
3,6 J 90,09 12,52 33,59 191,98 9,83 9,01 18,84 88,82 86,93
4,0 Q 88,75 13,86 36,93 211,07 10,88 8,87 19,76 98,69 96,59
4,5 6 87,09 15,52 41,00 234,32 12,19 8,71 20,89 111,02 108,66
5,0 7 85,44 17,17 44,96 256,92 13,48 8,54 22,02 123,36 120,73
5,6 R 83,48 19,12 49,55 283,20 15,01 8,35 23,36 138,16 135,22
6,3 8 81,23 21,38 54,72 312,71 16,78 8,12 24,90 155,43 152,13
7,1 9 78,70 23,91 60,37 344,99 18,77 7,87 26,64 175,17 171,44
8,0 A 75,89 26,72 66,40 379,49 20,97 7,59 28,56 197,38 193,18
8,8 B 73,44 29,17 71,50 408,61 22,90 7,34 30,24 217,11 212,49
10,0 C 69,84 32,77 78,68 449,66 25,72 6,98 32,71 246,72 241,47
11,0 D 66,91 35,70 84,26 481,56 28,02 6,69 34,71 271,39 265,62
12,5 E 62,63 39,98 91,98 525,67 31,38 6,26 37,64 308,40 301,84
14,2 F 57,95 44,66 99,84 570,56 35,05 5,80 40,85 350,34 342,89
16,0 S 53,20 49,41 107,20 612,63 38,79 5,32 44,11 394,75 386,35
17,5 T 49,39 53,22 112,64 643,71 41,78 4,94 46,72 413,39 422,57
20,0 U 43,36 59,25 120,43 688,23 46,51 4,34 50,85 472,44 482,94
22,2 V 38,37 64,23 126,10 720,64 50,42 3,84 54,26 524,41 -
25,0 W 32,47 70,14 131,92 735,92 55,06 3,25 58,30 590,55 -
*) see page 5
Edition: 2003-04
H 110
Page 8
W e i g h t s 10)
Pipe Water- Summary
filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
125 139,7 2,3 L 143,35 9,93 33,55 234,35 7,79 14,34 22,13 - 45,44
2,6 M 142,08 11,20 37,68 263,21 8,79 14,21 23,00 - 51,37
2,9 N 140,82 12,46 41,76 291,68 9,78 14,08 23,87 - 57,29
3,2 3 139,56 13,72 45,78 319,78 10,77 13,96 24,73 - 63,22
3,6 4 137,89 15,39 51,06 356,65 12,08 13,79 25,87 - 71,12
4,0 J 136,23 17,05 56,24 392,86 13,39 13,62 27,01 67,29 79,03
4,5 6 134,17 19,11 62,59 437,20 15,00 13,42 28,42 77,10 88,90
5,0 Q 132,12 21,16 68,80 480,54 16,61 13,21 29,82 86,91 98,78
5,6 7 129,69 23,59 76,05 531,24 18,52 12,97 31,49 98,69 110,64
6,3 8 126,88 26,40 84,27 588,62 20,73 12,69 33,41 112,43 124,47
7,1 9 123,70 29,58 93,33 651,92 23,22 12,37 35,59 128,13 140,27
8,0 A 120,18 33,10 103,12 720,29 25,98 12,02 38,00 145,79 158,05
8,8 B 117,09 36,19 111,47 778,61 28,41 11,71 40,12 161,49 173,86
10,0 C 112,53 40,75 123,39 861,89 31,99 11,25 43,24 185,04 197,57
11,0 D 108,80 44,48 132,80 927,58 34,91 10,88 45,79 204,66 217,32
12,5 E 103,33 49,95 146,03 1020,01 39,21 10,33 49,54 234,10 246,96
14,2 F 97,29 55,99 159,82 1116,36 43,95 9,73 53,68 267,47 280,54
16,0 S 91,10 62,18 173,11 1209,19 48,81 9,11 57,92 302,79 316,11
17,5 T 86,10 67,18 183,22 1279,76 52,74 8,61 61,35 318,09 345,74
20,0 U 78,07 75,21 198,23 1384,62 59,04 7,81 66,85 365,07 395,13
22,2 V 71,33 81,95 209,70 1464,73 64,33 7,13 71,46 406,41 -
25,0 W 63,19 90,09 222,17 1551,84 70,72 6,32 77,04 459,02 -
28,0 - 55,02 98,26 233,17 1628,71 77,13 5,50 82,63 515,39 -
30,0 - 49,89 103,39 239,31 1671,57 81,16 4,99 86,15 552,97 -
150 168,3 4,5 J 199,31 23,16 92,36 777,22 18,18 19,93 38,11 64,00 -
5,0 Q 196,81 25,65 101,70 855,85 20,14 19,68 39,82 72,14 -
5,6 6 193,84 28,62 112,69 948,25 22,47 19,38 41,85 81,92 -
6,3 7 190,40 32,06 125,18 1053,42 25,17 19,04 44,21 93,32 -
7,1 8 186,51 35,96 139,06 1170,19 28,23 18,65 46,88 106,35 -
8,0 9 182,18 40,29 154,16 1297,27 31,63 18,22 49,84 121,01 -
8,8 A 178,37 44,10 167,14 1406,52 34,61 17,84 52,45 134,05 -
10,0 B 172,73 49,73 185,86 1563,98 39,04 17,27 56,31 153,59 -
11,0 C 168,10 54,36 200,77 1689,50 42,67 16,81 59,48 169,89 -
12,5 D 161,28 61,18 222,03 1868,35 48,03 16,13 64,16 194,32 -
14,2 E 153,72 68,74 244,55 2057,92 53,96 15,37 69,34 222,01 -
16,0 F 145,91 76,55 266,68 2244,12 60,10 14,59 74,69 251,34 -
17,5 S 139,56 82,91 283,83 2388,43 65,08 13,96 79,04 264,04 -
20,0 T 129,28 93,18 309,95 2608,20 73,15 12,93 86,07 303,03 -
22,2 U 120,57 101,90 330,54 2781,49 79,99 12,06 92,04 337,34 -
25,0 V 109,92 112,55 353,76 2976,87 88,35 10,99 99,34 381,02 -
28,0 W 99,05 123,41 375,23 3157,57 96,88 9,90 106,79 427,81 -
30,0 - 92,12 130,34 387,76 3263,00 102,32 9,21 111,53 459,00 -
32,0 - 85,44 137,02 398,97 3357,37 107,56 8,54 116,11 490,20 -
36,0 - 72,84 149,63 417,84 3561,12 117,46 7,28 124,74 552,58 -
(175) 193,7 5,6 R 261,59 33,09 151,25 1464,87 25,98 26,16 52,14 71,18 -
6,3 7 257,59 37,09 168,31 1630,05 29,12 25,76 54,87 81,08 -
7,1 8 253,06 41,62 187,32 1814,18 32,67 25,31 57,98 92,41 -
8,0 9 248,01 46,67 208,11 2015,54 36,64 24,80 61,44 105,15 -
8,8 A 243,56 51,12 226,07 2189,46 40,13 24,36 64,48 116,47 -
10,0 B 236,97 57,71 252,10 2441,59 45,30 23,70 69,00 133,45 -
11,0 C 231,54 63,14 272,99 2643,87 49,56 23,15 72,72 147,61 -
12,5 D 223,52 71,16 302,97 2934,31 55,86 22,35 78,21 168,84 -
14,2 E 214,60 80,08 335,08 3245,27 62,86 21,46 84,32 192,90 -
16,0 F 205,36 89,32 366,99 3554,26 70,12 20,54 90,65 218,38 -
17,5 S 197,81 96,87 391,99 3796,46 76,04 19,78 95,82 229,41 -
20,0 T 185,54 109,14 430,64 4170,70 85,67 18,55 104,23 263,29 -
22,2 - 175,07 119,61 461,66 4471,18 93,89 17,51 111,40 293,11 -
25,0 - 162,18 132,50 497,37 4817,03 104,01 16,22 120,23 331,05 -
28,0 - 148,92 145,76 531,27 5145,32 114,42 14,89 129,31 371,71 -
30,0 - 140,40 154,28 551,34 5341,63 121,11 14,04 135,15 398,81 -
32,0 - 132,12 162,56 570,06 5521,08 127,61 13,21 140,82 425,92 -
36,0 - 116,32 178,35 602,31 5833,37 140,01 11,63 151,64 480,12 -
40,0 - 101,53 193,15 628,79 6089,79 151,62 10,15 161,77 534,33 -
*) see page 5
Edition: 2003-04
H 110
Page 9
W e i g h t s 10)
Pipe Water- Summary
filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
200 219,1 6,3 7 334,91 42,12 217,81 2386,14 33,06 33,49 66,55 71,68 -
7,1 8 329,74 47,29 242,77 2659,58 37,12 32,97 70,09 81,69 -
8,0 9 323,97 53,06 270,16 2959,63 41,65 32,40 74,05 92,96 -
8,8 A 318,89 58,14 293,91 3219,74 45,64 31,89 77,53 102,97 -
10,0 B 311,34 65,69 328,47 3598,44 51,57 31,13 82,70 117,98 -
11,0 C 305,11 71,91 356,34 3903,74 56,45 30,51 86,96 130,50 -
12,5 D 295,90 81,13 396,58 4344,58 63,69 29,59 93,28 149,27 -
14,2 E 285,62 91,41 439,99 4820,09 71,75 28,56 100,32 170,54 -
16,0 F 274,94 102,09 483,49 5296,59 80,14 27,49 107,63 193,06 -
17,5 S 266,19 110,84 517,87 5673,22 87,01 26,62 113,63 202,82 -
20,0 T 251,93 125,10 571,55 6261,29 98,20 25,19 123,40 232,77 -
22,2 U 239,70 137,32 615,21 6739,63 107,80 23,97 131,77 259,13 -
25,0 V 224,58 152,45 666,21 7298,31 119,67 22,46 142,13 292,67 -
28,0 W 208,93 168,10 715,50 7838,35 131,96 20,89 152,85 328,62 -
30,0 - 198,81 178,22 745,48 8166,78 139,90 19,88 159,79 352,58 -
32,0 - 188,94 188,09 773,29 8471,36 147,65 18,89 166,55 376,54 -
36,0 - 169,95 207,08 822,79 9013,63 162,56 16,99 179,55 424,46 -
40,0 - 151,97 225,06 864,84 9474,29 176,68 15,20 191,87 472,39 -
45,0 - 130,90 246,13 908,12 9948,44 193,21 13,09 206,30 508,63 -
250 273,0 6,3 J 532,56 52,79 344,02 4695,82 41,44 53,26 94,69 57,53 -
7,1 Q 526,04 59,31 384,28 5245,45 46,56 52,60 99,16 65,56 -
8,0 R 518,75 66,60 428,70 5851,71 52,28 51,87 104,16 74,60 -
8,8 8 512,31 73,04 467,40 6380,03 57,34 51,23 108,57 82,64 -
10,0 9 502,73 82,62 524,11 7154,09 64,86 50,27 115,13 94,69 -
11,0 A 494,81 90,54 570,15 7782,54 71,07 49,48 120,56 104,73 -
12,5 B 483,05 102,30 637,18 8697,45 80,30 48,31 128,61 119,80 -
14,2 C 469,90 115,45 710,25 9694,97 90,63 46,99 137,62 136,87 -
16,0 D 456,17 129,18 784,38 10706,79 101,41 45,62 147,02 154,95 -
17,5 E 444,88 140,47 843,67 11516,04 110,27 44,49 154,76 162,77 -
20,0 F 426,38 158,96 937,61 12798,44 124,79 42,64 167,43 186,81 -
22,2 S 410,43 174,92 1015,44 13860,69 137,31 41,04 178,35 207,97 -
25,0 T 390,57 194,78 1108,19 15126,76 152,90 39,06 191,96 234,89 -
28,0 U 369,84 215,51 1200,10 16381,43 169,18 36,98 206,16 263,74 -
30,0 V 356,33 229,02 1257,06 17162,06 179,78 35,63 215,42 282,97 -
32,0 W 343,07 242,28 1311,35 17899,92 190,19 34,31 224,50 302,20 -
36,0 - 317,31 268,04 1410,53 19253,70 210,41 31,73 242,14 340,66 -
40,0 - 292,55 292,80 1498,54 20455,13 229,85 29,26 259,10 379,12 -
45,0 - 263,02 322,33 1594,19 21760,73 253,03 26,30 279,33 408,21 -
50,0 - 235,06 350,29 1675,38 22868,96 274,98 23,51 298,48 454,15 -
300 323,9 7,1 J 753,31 70,66 547,66 8869,36 55,47 75,33 130,80 55,26 -
8,0 Q 744,58 79,39 611,92 9910,08 62,32 74,46 136,78 62,88 -
8,8 R 736,86 87,11 668,11 10819,98 68,38 73,69 142,07 69,65 -
10,0 8 725,36 98,61 750,75 12158,34 77,41 72,54 149,95 79,81 -
11,0 9 715,84 108,13 818,13 13249,69 84,88 71,58 156,47 88,27 -
12,5 A 701,68 122,29 916,74 14846,53 95,99 70,17 166,16 100,97 -
14,2 B 685,81 138,16 1024,95 16599,07 108,45 68,58 177,04 115,36 -
16,0 C 669,20 154,77 1135,53 18389,93 121,49 66,92 188,41 130,60 -
17,5 D 655,52 168,45 1224,61 19832,56 132,23 65,55 197,79 137,20 -
20,0 E 633,02 190,95 1367,03 22139,05 149,89 63,30 213,20 157,46 -
22,2 F 613,56 210,42 1486,29 24070,43 165,18 61,36 226,53 175,29 -
25,0 S 589,22 234,76 1630,14 26400,08 184,28 58,92 243,20 197,98 -
28,0 U 563,68 260,29 1774,78 28742,48 204,33 56,37 260,69 222,29 -
30,0 T 546,98 276,99 1865,95 30219,11 217,44 54,70 272,14 238,50 -
32,0 V 530,52 293,45 1953,08 31630,09 230,36 53,05 283,41 254,71 -
36,0 W 498,36 325,61 2115,65 34263,00 255,60 49,84 305,44 287,13 -
40,0 - 467,21 356,76 2263,46 36656,66 280,06 46,72 326,78 319,54 -
45,0 - 429,69 394,29 2428,84 39335,02 309,51 42,97 352,48 344,06 -
50,0 - 393,73 430,24 2574,31 41691,02 337,74 39,37 377,11 382,78 -
*) see page 5
Edition: 2003-04
H 110
Page 10
W e i g h t s 10)
Pipe Water- Summary
filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
350 355,6 8,0 J 905,79 87,36 742,48 13201,38 68,58 90,58 159,16 57,27 -
8,8 Q 897,27 95,88 811,20 14423,13 75,26 89,73 164,99 63,44 -
10,0 8 884,57 108,57 912,46 16223,50 85,23 88,46 173,69 72,69 -
11,0 9 874,06 119,09 995,20 17694,60 93,48 87,41 180,89 80,40 -
12,5 A 858,41 134,74 1116,55 19852,18 105,77 85,84 191,61 91,97 -
14,2 B 840,85 152,30 1250,14 22227,44 119,56 84,08 203,64 105,08 -
16,0 C 822,45 170,70 1387,12 24663,00 134,00 82,24 216,25 118,95 -
17,5 D 807,27 185,88 1497,83 26631,49 145,92 80,73 226,64 124,96 -
20,0 E 782,28 210,86 1675,57 29791,71 165,53 78,23 243,76 143,42 -
22,2 F 760,62 232,52 1825,15 32451,21 182,53 76,06 258,59 159,66 -
25,0 S 733,49 259,65 2006,56 35676,71 203,83 73,35 277,18 180,33 -
28,0 U 704,97 288,17 2190,18 38941,32 226,22 70,50 296,71 202,47 -
30,0 T 686,28 306,87 2306,61 41011,50 240,89 68,63 309,52 217,24 -
32,0 V 667,83 325,32 2418,41 42999,33 255,37 66,78 322,16 232,00 -
36,0 W 631,69 361,46 2628,61 46736,73 283,75 63,17 346,91 261,53 -
40,0 - 596,55 396,59 2821,76 50170,89 311,33 59,66 370,98 291,06 -
45,0 - 554,05 439,10 3040,65 54062,79 344,69 55,40 400,10 313,39 -
50,0 - 513,11 480,04 3236,17 57539,05 376,83 51,13 428,14 348,66 -
400 406,4 8,8 J 1187,25 109,92 1069,48 21731,74 86,29 118,73 205,01 55,51 -
10,0 R 1172,64 124,53 1204,52 24475,81 97,76 117,26 215,02 63,61 -
11,0 8 1160,53 136,64 1315,15 26723,82 107,26 116,05 223,32 70,35 -
12,5 9 1142,49 154,68 1477,89 30030,67 121,43 114,25 235,68 80,47 -
14,2 A 1122,21 174,96 1657,74 33685,25 137,35 112,22 249,57 91,94 -
16,0 B 1100,93 196,24 1842,95 37448,82 154,05 110,09 264,14 104,08 -
17,5 C 1083,36 213,81 1993,27 40503,28 167,84 108,34 276,18 109,34 -
20,0 D 1054,39 242,78 2235,83 45432,13 190,58 105,44 296,02 125,49 -
22,2 E 1029,22 267,95 2441,23 49605,80 210,34 102,92 313,27 139,70 -
25,0 F 997,62 299,55 2692,03 54702,09 235,15 99,76 334,91 157,79 -
28,0 S 964,31 332,86 2947,94 59902,20 261,29 96,43 357,72 177,17 -
30,0 T 942,42 354,75 3111,40 63223,73 278,48 94,24 372,72 190,08 -
32,0 U 920,78 376,39 3269,30 66432,17 295,46 92,08 387,54 203,00 -
36,0 V 878,26 418,91 3568,90 72520,13 328,85 87,83 416,67 228,84 -
40,0 W 836,74 460,43 3847,76 78186,48 361,44 83,67 445,11 254,68 -
45,0 - 786,25 510,92 4168,65 84706,86 401,07 78,63 479,70 274,22 -
50,0 - 737,34 559,83 4460,50 90637,45 439,47 73,73 513,20 305,08 -
500 508,0 11,0 J 1855,08 171,75 2088,82 53055,98 134,82 185,51 320,33 56,28 -
12,5 8 1832,25 194,58 2352,58 59755,41 152,75 183,22 335,97 64,38 -
14,2 9 1806,54 220,29 2645,61 67198,62 172,93 180,65 353,58 73,55 -
16,0 A 1779,52 247,31 2949,18 74909,04 194,14 177,95 372,09 83,27 -
17,5 B 1757,16 269,67 3196,93 81202,14 211,69 175,72 387,40 87,48 -
20,0 C 1720,21 306,62 3599,52 91427,79 240,70 172,02 412,72 100,39 -
22,2 D 1688,02 338,81 3943,28 100159,30 265,97 168,80 434,77 111,76 -
25,0 E 1647,48 379,35 4366,86 110918,31 297,79 164,75 462,54 126,23 -
28,0 F 1604,60 422,23 4803,78 122016,04 331,45 160,46 491,91 141,73 -
30,0 S 1576,33 450,50 5085,56 129173,13 353,65 157,63 511,28 152,07 -
32,0 T 1548,30 478,53 5359,88 136141,05 375,64 154,83 530,47 162,40 -
36,0 U 1493,01 533,82 5886,73 149522,81 419,05 149,30 568,35 183,07 -
40,0 V 1438,72 588,11 6385,35 162187,92 461,66 143,87 605,54 203,74 -
45,0 W 1372,28 654,55 6970,52 177051,09 513,82 137,23 651,05 219,37 -
50,0 - 1307,41 719,42 7515,16 190884,95 564,75 130,74 659,49 244,06 -
600 610,0 12,5 J 2687,83 234,64 3434,58 104754,75 184,19 268,78 452,97 53,61 -
14,2 9 2656,68 265,79 3868,98 118004,02 208,65 265,67 474,31 61,25 -
16,0 A 2623,89 298,58 4320,70 131781,45 234,38 262,39 496,77 69,34 -
17,5 B 2596,72 325,74 4690,75 143067,75 255,71 259,67 515,38 72,85 -
20,0 C 2551,76 370,71 5294,74 161489,69 291,01 255,18 546,18 83,61 -
22,2 D 2512,51 409,95 5813,28 177304,98 321,81 251,25 573,06 93,07 -
25,0 E 2463,01 459,46 6455,95 196906,47 360,67 246,30 606,98 105,12 -
28,0 F 2410,51 511,95 7123,46 217265,58 401,88 241,05 642,94 118,03 -
30,0 S 2375,83 546,64 7556,59 230475,89 429,11 237,58 666,69 126,64 -
32,0 T 2341,40 581,07 7980,36 243401,11 456,14 234,14 690,28 135,25 -
36,0 U 2273,29 649,18 8800,42 268412,69 509,61 227,33 736,93 152,46 -
40,0 V 2206,18 716,28 9584,69 292333,06 562,28 220,62 782,90 169,67 -
45,0 W 2123,72 798,75 10516,33 320748,06 627,02 212,37 839,39 182,69 -
*) see page 5
Edition: 2003-04
Standard
Welded Pipes
acc. to DIN2458 / DIN2463 (ISO1127)
H 120
Page 1 of 15
Example of Designation of a welded pipe with 114,3 mm outside diameter and 4,0 mm wallthickness acc. to
Designation: DIN2463 resp. DIN17457, manufacturing length with welding bevel acc. to DIN2559,
with certificate 3.1B, material: 1.4541
Partnumber
121272Q01 114,3 x 4,0 PIPE WELDED BEVELED ENDS 1.4541
H120/DIN2463/DIN17457 CERT:3.1B
Partnumbering Code
Position of Part No.
1. - 2. 3. 4. 5. - 6. 7. - 8. 9.
5) Length / 6) 1) Wallthick- 16)
Kind of Part Surface finish End- Material ness Certificate
Cd. Cd. preparation Cd. Cd. Cd. Cd. Cd.
metallic 13) 1 manufacturing 1 St37.8.I 30 4) 0 3.1B 1
Welded 12 galvanized 14) 2 length H II 32 *) 2.2 W
Pipes outside bituminat. 3 L = 5 - 12 m St37.8.III 33 11)
and limed plain ends St37.4 34 3.1A A
protective coating 4 manufacturing 2 TTSt35N 35 11)
inside and outside length TTSt35V 36 3.1C C
protective coating 5 L = 5 - 12 m St37.0 37 11)
inside with welding StE 240.7 38 3.1B D
protective coating 6 bevel 15Mo3 41
outside Specified 4 13CrMo44 42
sandblasted 7 length 10CrMo9.10 46
inside L=6m 12CrMo19.5V 47
metallic, 8 plain ends 10Ni14 52
inside pickled Specified 5 1.4878 61
In accordance 9 length St52.4 RR
with order L = 6 m with St37.0/G SG
special finish S welding bevel TStE 255 TA
for oxygen Specified 6 TStE 285 TB
service length TStE 355 TC
phosphated and A L = 12 m with
oiled welding bevel Stainless steels 7)
Coatings 1.4541 72
bituminous E 1.4571 73
coating 1.4306 74
acc. to DIN 30673 1.4301 75
type A3,5-G 1.4436 76
up to 40° C 1.4401 77
PE acc. to N 1.4404 78
DIN30670-Nn 1.4435 79
up to 50°C
PE acc. to V 1.4306 / NH
DIN30670-Nv HUEY-tested 2)
up to 50°C 1.4306 / NM
HUEY/£ 0,25 Mo 2)
1.4541 / NS
STRAUSS-test 3)
1.4462 NJ
1.4439 NK
1.4539 NL
Page 2
1) Materials:
Stainless steels acc. to DIN17457 (3.1B) / DIN17455 (2.2)
St37.8 / 15Mo3 acc. to DIN17177
TTSt35N / TTSt35V / 10Ni14 acc. to DIN17174
TStE255 / TStE285 / TStE355 acc. to DIN17178
StE240.7 acc. to DIN17172 (or L245NB acc. to DIN EN10208-2)
12CrMo19.5V acc. to VdTÜV-Wbl. 007/1
St37.0 acc. to DIN1626
St37.4 / St52.4 acc. to DIN1628
1.4878 acc. to SEW 470
1.4462 / 1.4539 acc. to DIN EN10088
2) With corrosion test acc. to ISO 3651/I or ASTM A262 practice C (HUEY-test).
3) With corrosion test acc. to ISO 3651/II or ASTM A262 practice E (STRAUSS-test).
4) Wallthickness code acc. to VAI-Std. H0010.
5) Code for surface finish;
Surface finish with:
Code 3 - 9: in accordance with order
Code S: outside metallic, inside free of scale, rust, oil and grease; closed with lid, with drying agent-bag,
prepared for oxygen service.
Code A: inside phosphated and oiled acc. to manufacturer´s option, however 5 g/m² Znph min.
acc. to DIN50942, outside metallic.
Code E, N, V: coating acc. to DIN30673 resp. DIN30670.
6) Code for end preparation;
Welding bevel acc. to DIN2559.
Ident No. 1 £ 3 mm wallthickness, Ident No. 22 £ 16 mm, Ident No. 3 > 16 mm.
7) Stainless pipes acc. to DIN2463 or ISO 1127: Tolerance class D2 / T3.
Finish for pipes acc. toDIN17457: d1 or k1 with inspection certificate 3.1B.
DIN17455: d3 or k3 with works report 2.2.
8) Outside diameters from DN6 to DN1000 also correspond with DIN ENV 10220.
9) Allowable working pressures are derived by using 1% offset strength as the ratio
(yield strength : tensile strength) £ 0,5.
10) Weight for stainl. pipes is calculated by following equation: GRss=GR x 1,01528.
11) Additional requirements to materials acc. to appropriate AD2000-Merkblätter.
Quality certificate as specified, as far as AD2000-Merkblätter do not allow / demand other certificates for
certain material testings or steps of manufacture.
12) Allowable working pressures at 20°C (formula see page 4): Pcs for St37.8
Pss for 1.4541
Correction factors for other materials see page 3.
Edition: 2003-04
H 120
Page 3
Material code 78 79 NJ NK NL
Material X2CrNiMo17.13.2 X2CrNiMo18.14.3 X2CrNiMoN22.5.3 X2CrNiMoN17.13.5 X1NiCrMoCuN25.20.5
Material No. 1.4404 1.4435 1.4462 1.4439 1.4539
Certificate 3.1B 3.1B 3.1B 3.1B 3.1B
Welding factor 1,0 1,0 1,0 1,0 1,0
Correction 1,35 1,35 2,71 1,89 1,50
factor A
Edition: 2003-04
H 120
Page 4
Index Formulas
DN mm Nominal diameter
Da mm Outside diameter
s mm Wallthickness
2
Di . p
Fi cm2 Cross section Fi = ¾¾¾ . 10 -2
4
p Da4 _ Di4
W cm3 Sectional modulas W = ¾ . ¾¾¾¾ . 10-3
32 Da
p
J cm4 Moment of inertia J=¾ . ( Da4 - Di4 ).10 -4
64
Pcs bar Max. allowable working pressure acc. to svc . 20 . 235 . 0,9
DIN2413 at 20°C for C-steel-pipes Pcs = ¾¾¾¾¾¾¾¾
with c2 = 1 mm corrosion allowance; 1,7 . Da
Material No. 1.0254 (St37.0) with
certificate 2.2 (safety factor = 1.7, v = 0.9)
Pss bar Max. allowable working pressure acc. to svs . 20 . 235 . 0,8
DIN2413 at 20°C for stainl.steel pipes Pss = ¾¾¾¾¾¾¾¾
without corrosion allowance (c2 = 0) 1,7 . Da
Material No. 1.4541 with
certificate 2.2 (safety factor = 1.7, v = 0.8)
Di mm Inside diameter Di = Da - 2 . s
ì svc = s - c1 - c2
sv mm Wallthickness for calculation í 100 - c1
î svs = s . ¾¾¾¾ - 0
100
Edition: 2003-04
H 120
Page 5
Welded Pipes: Excerpt from DIN2458 and DIN2463 also DIN EN10220
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
6 10.2 1.0 4 0.53 0.29 0.06 0.03 0.23 0.05 0.28 195.16
1.2 5 0.48 0.34 0.07 0.03 0.27 0.05 0.31 234.19
1.4 3 0.43 0.39 0.08 0.04 0.30 0.04 0.35 24.39
1.6 H 0.38 0.43 0.08 0.04 0.34 0.04 0.38 73.18
1.8 L 0.34 0.48 0.09 0.04 0.37 0.03 0.41 121.97
2.0 6 0.30 0.52 0.09 0.05 0.40 0.03 0.43 170.76
2.3 7 0.25 0.57 0.09 0.05 0.45 0.02 0.47 243.94
2.6 M 0.20 0.62 0.10 0.05 0.49 0.02 0.51 317.13
8 13.5 1.0 1 1.04 0.39 0.11 0.08 0.31 0.10 0.41 147.45
1.2 2 0.97 0.46 0.13 0.09 0.36 0.10 0.46 176.94
1.4 3 0.90 0.53 0.15 0.10 0.42 0.09 0.51 18.43
1.6 4 0.83 0.60 0.16 0.11 0.47 0.08 0.55 55.29
1.8 H 0.77 0.66 0.17 0.12 0.52 0.08 0.60 92.16
2.0 6 0.71 0.72 0.18 0.12 0.57 0.07 0.64 129.02
2.3 7 0.62 0.81 0.20 0.13 0.64 0.06 0.70 184.31
2.6 M 0.54 0.89 0.21 0.14 0.70 0.05 0.75 239.61
2.9 8 0.47 0.97 0.22 0.15 0.76 0.05 0.80 294.90
3.2 9 0.40 1.04 0.22 0.15 0.81 0.04 0.85 350.20
3.6 Q 0.31 1.12 0.23 0.16 0.88 0.03 0.91 423.92
10 17.2 1.0 1 1.81 0.51 0.19 0.17 0.40 0.18 0.58 115.73
1.2 2 1.72 0.60 0.23 0.19 0.47 0.17 0.65 138.88
1.4 3 1.63 0.69 0.25 0.22 0.55 0.16 0.71 162.02
1.6 4,K 1.54 0.78 0.28 0.24 0.62 0.15 0.77 43.40
1.8 H 1.45 0.87 0.30 0.26 0.68 0.15 0.83 72.33
2.0 5 1.37 0.96 0.33 0.28 0.75 0.14 0.89 101.27
2.3 6 1.25 1.08 0.36 0.31 0.85 0.12 0.97 144.66
2.6 M 1.13 1.19 0.38 0.33 0.94 0.11 1.05 188.06
2.9 7 1.02 1.30 0.40 0.35 1.02 0.10 1.12 231.46
3.2 P 0.92 1.41 0.42 0.36 1.10 0.09 1.20 274.86
3.6 8 0.79 1.54 0.44 0.38 1.21 0.08 1.29 332.73
4.0 C 0.66 1.66 0.46 0.39 1.30 0.07 1.37 390.60
15 21.3 1.0 1 2.93 0.64 0.31 0.33 0.50 0.29 0.79 93.45
1.2 2 2.81 0.76 0.36 0.38 0.59 0.28 0.88 112.15
1.4 3 2.69 0.88 0.41 0.44 0.69 0.27 0.96 130.84
1.6 4,K 2.57 0.99 0.45 0.48 0.78 0.26 1.03 35.05 149.53
1.8 - 2.46 1.10 0.50 0.53 0.87 0.25 1.11 58.41 168.22
2.0 5,H 2.35 1.21 0.54 0.57 0.95 0.24 1.19 81.77 186.91
2.3 6 2.19 1.37 0.59 0.63 1.08 0.22 1.30 116.82
2.6 M 2.04 1.53 0.64 0.68 1.20 0.20 1.40 151.86
2.9 7 1.89 1.68 0.68 0.73 1.32 0.19 1.50 186.91
3.2 P 1.74 1.82 0.72 0.77 1.43 0.17 1.60 221.96
3.6 8 1.56 2.00 0.77 0.82 1.57 0.16 1.73 268.68
4.0 C 1.39 2.17 0.80 0.86 1.71 0.14 1.85 315.41
4.5 D 1.19 2.38 0.84 0.90 1.86 0.12 1.98 373.82
20 26.9 1.0 - 4.87 0.81 0.51 0.68 0.64 0.49 1.13 74.00
1.2 1 4.71 0.97 0.60 0.80 0.76 0.47 1.23 88.80
1.4 2 4.56 1.12 0.68 0.91 0.88 0.46 1.34 103.60
1.6 3,K 4.41 1.27 0.76 1.02 1.00 0.44 1.44 27.75 118.40
1.8 - 4.26 1.42 0.84 1.12 1.11 0.43 1.54 46.25 133.20
2.0 H 4.12 1.56 0.91 1.22 1.23 0.41 1.64 64.75 148.00
2.3 J 3.91 1.78 1.01 1.36 1.40 0.39 1.79 92.50 170.20
2.6 M 3.70 1.98 1.10 1.48 1.56 0.37 1.93 120.25 192.40
2.9 6 3.50 2.19 1.19 1.60 1.72 0.35 2.07 148.00
3.2 7 3.30 2.38 1.27 1.70 1.87 0.33 2.20 175.75
3.6 P 3.05 2.64 1.36 1.83 2.07 0.30 2.37 212.75
4.0 8 2.81 2.88 1.45 1.94 2.26 0.28 2.54 249.75
4.5 D 2.52 3.17 1.54 2.07 2.49 0.25 2.74 296.00
5.0 E 2.24 3.44 1.61 2.17 2.70 0.22 2.92 342.25
Edition: 2003-04
H 120
Page 6
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
25 33.7 1.0 - 7.89 1.03 0.82 1.37 0.81 0.79 1.60 59.07
1.2 1 7.69 1.23 0.96 1.62 0.96 0.77 1.73 70.88
1.4 2 7.50 1.42 1.10 1.86 1.12 0.75 1.87 82.70
1.6 3,K 7.31 1.61 1.24 2.08 1.27 0.73 2.00 22.15 94.51
1.8 - 7.12 1.80 1.37 2.30 1.42 0.71 2.13 36.92 106.32
2.0 H 6.93 1.99 1.49 2.51 1.56 0.69 2.26 51.68 118.14
2.3 L 6.65 2.27 1.67 2.81 1.78 0.67 2.45 73.83 135.86
2.6 5,J 6.38 2.54 1.84 3.09 1.99 0.64 2.63 95.99 153.58
2.9 A 6.11 2.81 1.99 3.36 2.20 0.61 2.81 118.14 171.30
3.2 6 5.85 3.07 2.14 3.60 2.41 0.59 2.99 140.29 189.02
3.6 B 5.52 3.40 2.32 3.91 2.67 0.55 3.22 169.82 212.64
4.0 7 5.19 3.73 2.49 4.19 2.93 0.52 3.45 199.35
4.5 8 4.79 4.13 2.67 4.50 3.24 0.48 3.72 236.27
5.0 9 4.41 4.51 2.84 4.78 3.54 0.44 3.98 273.19
5.6 D 3.98 4.94 3.01 5.07 3.88 0.40 4.28 317.49
6.3 E 3.50 5.42 3.18 5.36 4.26 0.35 4.61 369.17
7.1 F 2.99 5.93 3.34 5.62 4.66 0.30 4.96 428.24
8.0 - 2.46 6.46 3.47 5.85 5.07 0.25 5.32 494.69
32 42.4 1.0 - 12.82 1.30 1.32 2.79 1.02 1.28 2.30 46.95
1.2 1 12.57 1.55 1.56 3.30 1.22 1.26 2.48 56.34
1.4 2 12.32 1.80 1.79 3.79 1.42 1.23 2.65 65.73
1.6 3 12.07 2.05 2.02 4.27 1.61 1.21 2.82 17.61 75.12
1.8 - 11.82 2.30 2.24 4.74 1.80 1.18 2.98 29.34 84.51
2.0 4,K 11.58 2.54 2.45 5.19 1.99 1.16 3.15 41.08 93.90
2.3 H,L 11.22 2.90 2.76 5.84 2.27 1.12 3.40 58.68 107.98
2.6 5,J 10.87 3.25 3.05 6.46 2.55 1.09 3.64 76.29 122.06
2.9 A 10.52 3.60 3.33 7.06 2.82 1.05 3.88 93.90 136.15
3.2 6 10.18 3.94 3.59 7.62 3.09 1.02 4.11 111.50 150.23
3.6 B 9.73 4.39 3.93 8.33 3.44 0.97 4.42 134.98 169.01
4.0 7 9.29 4.83 4.24 8.99 3.79 0.93 4.72 158.45
4.5 8 8.76 5.36 4.60 9.76 4.21 0.88 5.08 187.79
5.0 9 8.24 5.87 4.93 10.46 4.61 0.82 5.44 217.13
5.6 D 7.65 6.47 5.29 11.21 5.08 0.76 5.85 252.34
6.3 E 6.97 7.14 5.66 11.99 5.61 0.70 6.31 293.42
7.1 F 6.25 7.87 6.02 12.76 6.18 0.62 6.81 340.37
8.0 S 5.47 8.65 6.36 13.48 6.79 0.55 7.33 393.19
8.8 T 4.83 9.29 6.61 14.01 7.29 0.48 7.77 440.14
40 48.3 1.2 1 16.55 1.78 2.04 4.93 1.39 1.65 3.05 49.46
1.4 - 16.26 2.06 2.35 5.68 1.62 1.63 3.25 57.70
1.6 2 15.98 2.35 2.65 6.41 1.84 1.60 3.44 15.45 65.94
1.8 - 15.69 2.63 2.95 7.12 2.06 1.57 3.63 25.76 74.18
2.0 3,K 15.41 2.91 3.23 7.81 2.28 1.54 3.82 36.06 82.43
2.3 4,H 15.00 3.32 3.65 8.81 2.61 1.50 4.11 51.52 94.79
2.6 5,J 14.59 3.73 4.05 9.78 2.93 1.46 4.39 66.97 107.15
2.9 6 14.19 4.14 4.43 10.70 3.25 1.42 4.67 82.43 119.52
3.2 A 13.79 4.53 4.80 11.59 3.56 1.38 4.94 97.88 131.88
3.6 B 13.27 5.06 5.26 12.71 3.97 1.33 5.30 118.49 148.37
4.0 C 12.76 5.57 5.70 13.77 4.37 1.28 5.65 139.09
4.5 7 12.13 6.19 6.21 15.01 4.86 1.21 6.07 164.85
5.0 8 11.52 6.80 6.69 16.15 5.34 1.15 6.49 190.61
5.6 9 10.81 7.51 7.21 17.42 5.90 1.08 6.98 221.52
6.3 D 10.01 8.31 7.76 18.74 6.53 1.00 7.53 257.58
7.1 E 9.13 9.19 8.31 20.08 7.21 0.91 8.13 298.79
8.0 F 8.19 10.13 8.85 21.37 7.95 0.82 8.77 345.16
8.8 S 7.40 10.92 9.26 22.35 8.57 0.74 9.31 386.37
*) see page 5
Edition: 2003-04
H 120
Page 7
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
50 60,3 1.6 2 25.61 2.95 4.22 12.72 2.32 2.56 4.88 12.38 52.82
1.8 - 25.25 3.31 4.70 14.16 2.60 2.52 5.12 20.63 59.42
2.0 3,K 24.89 3.66 5.17 15.58 2.88 2.49 5.36 28.88 66.02
2.3 4,H 24.37 4.19 5.85 17.65 3.29 2.44 5.73 41.26 75.93
2.6 M 23.84 4.71 6.52 19.65 3.70 2.38 6.08 53.64 85.83
2.9 5,J 23.33 5.23 7.16 21.59 4.11 2.33 6.44 66.02 95.73
3.2 6 22.82 5.74 7.78 23.47 4.51 2.28 6.79 78.40 105.64
3.6 P 22.15 6.41 8.58 25.87 5.03 2.21 7.25 94.91 118.84
4.0 A 21.48 7.07 9.34 28.17 5.55 2.15 7.70 111.41
4.5 7 20.67 7.89 10.25 30.90 6.19 2.07 8.26 132.05
5.0 B 19.87 8.69 11.10 33.48 6.82 1.99 8.81 152.68
5.6 8 18.93 9.62 12.06 36.37 7.55 1.89 9.45 177.44
6.3 C 17.87 10.69 13.10 39.49 8.39 1.79 10.18 206.32
7.1 D 16.69 11.87 14.17 42.73 9.32 1.67 10.98 239.33
8.0 E 15.41 13.14 15.25 45.99 10.32 1.54 11.86 276.47
8.8 F 14.32 14.24 16.11 48.58 11.18 1.43 12.61 309.48
10.0 S 12.76 15.80 17.23 51.95 12.40 1.28 13.68 359.00
65 76.1 1.6 2 41.74 3.74 6.83 25.99 2.94 4.17 7.11 9.81 41.85
1.8 - 41.28 4.20 7.62 29.01 3.30 4.13 7.43 16.35 47.08
2.0 3,K 40.83 4.66 8.40 31.98 3.65 4.08 7.74 22.89 52.32
2.3 L 40.15 5.33 9.55 36.34 4.19 4.02 8.20 32.70 60.16
2.6 4,H 39.48 6.00 10.67 40.59 4.71 3.95 8.66 42.51 68.01
2.9 5,J 38.82 6.67 11.76 44.74 5.24 3.88 9.12 52.32 75.86
3.2 6 38.16 7.33 12.82 48.78 5.75 3.82 9.57 62.12 83.70
3.6 P 37.28 8.20 14.19 54.01 6.44 3.73 10.17 75.20 94.17
4.0 Q 36.42 9.06 15.52 59.06 7.11 3.64 10.75 88.28 104.63
4.5 7 35.36 10.12 17.11 65.12 7.95 3.54 11.48 104.63 117.71
5.0 R 34.32 11.17 18.64 70.92 8.77 3.43 12.20 120.98
5.6 8 33.08 12.40 20.38 77.54 9.74 3.31 13.04 140.60
6.3 A 31.67 13.81 22.29 84.82 10.84 3.17 14.01 163.48
7.1 B 30.09 15.39 24.33 92.56 12.08 3.01 15.09 189.64
8.0 C 28.37 17.12 26.44 100.59 13.44 2.84 16.27 219.07
8.8 D 26.88 18.61 28.16 107.14 14.61 2.69 17.29 245.23
10.0 E 24.72 20.77 30.49 116.01 16.30 2.47 18.77 284.46
80 88.9 1.6 1 57.68 4.39 9.41 41.82 3.44 5.77 9.21 8.40 35.83
1.8 - 57.15 4.93 10.51 46.73 3.87 5.71 9.58 13.99 40.30
2.0 2,K 56.61 5.46 11.60 51.57 4.29 5.66 9.95 19.59 44.78
2.3 L 55.81 6.26 13.21 58.70 4.91 5.58 10.49 27.99 51.50
2.6 3 55.02 7.05 14.78 65.68 5.53 5.50 11.04 36.39 58.22
2.9 4,H 54.24 7.84 16.31 72.52 6.15 5.42 11.57 44.78 64.93
3.2 5,J 53.46 8.62 17.82 79.21 6.76 5.35 12.11 53.18 71.65
3.6 6 52.42 9.65 19.77 87.90 7.57 5.24 12.82 64.38 80.61
4.0 Q 51.40 10.67 21.67 96.34 8.38 5.14 13.52 75.57 89.57
4.5 7 50.14 11.93 23.97 106.54 9.37 5.01 14.38 89.57 100.76
5.0 R 48.89 13.18 26.18 116.37 10.35 4.89 15.23 103.56 111.96
5.6 8 47.42 14.65 28.73 127.69 11.50 4.74 16.25 120.35
6.3 9 45.72 16.35 31.55 140.24 12.83 4.57 17.41 139.95
7.1 A 43.83 18.25 34.59 153.76 14.32 4.38 18.71 162.34
8.0 B 41.74 20.33 37.79 167.97 15.96 4.17 20.13 187.53
8.8 C 39.93 22.14 40.44 179.74 17.38 3.99 21.38 209.92
10.0 D 37.28 24.79 44.09 195.98 19.46 3.73 23.19 243.51
11.0 D 66.91 35.70 84.26 481.56 28.02 6.69 34.71 198.01
*) see page 5
Edition: 2003-04
H 120
Page 8
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
100 114.3 1.6 1 96.94 5.66 15.74 89.96 4.45 9.69 14.14 27.86
1.8 - 96.25 6.36 17.62 100.67 4.99 9.62 14.62 31.35
2.0 2,K 95.55 7.06 19.47 111.27 5.54 9.56 15.09 15.24 34.83
2.3 L 94.52 8.09 22.21 126.95 6.35 9.45 15.80 21.77 40.06
2.6 3 93.48 9.12 24.91 142.37 7.16 9.35 16.51 28.30 45.28
2.9 N 92.46 10.15 27.57 157.55 7.97 9.25 17.21 34.83 50.50
3.2 4,H 91.44 11.17 30.18 172.47 8.77 9.14 17.91 41.36 55.73
3.6 5,J 90.09 12.52 33.59 191.98 9.83 9.01 18.84 50.07 62.70
4.0 Q 88.75 13.86 36.93 211.07 10.88 8.87 19.76 58.78 69.66
4.5 6 87.09 15.52 41.00 234.32 12.19 8.71 20.89 69.66 78.37
5.0 7 85.44 17.17 44.96 256.92 13.48 8.54 22.02 80.55 87.08
5.6 R 83.48 19.12 49.55 283.20 15.01 8.35 23.36 93.61 97.53
6.3 8 81.23 21.38 54.72 312.71 16.78 8.12 24.90 108.85 109.72
7.1 9 78.70 23.91 60.37 344.99 18.77 7.87 26.64 126.26 123.65
8.0 A 75.89 26.72 66.40 379.49 20.97 7.59 28.56 145.85 139.32
8.8 B 73.44 29.17 71.50 408.61 22.90 7.34 30.24 163.27
10.0 C 69.84 32.77 78.68 449.66 25.72 6.98 32.71 189.39
125 139.7 1.6 1 146.34 6.94 23.69 165.51 5.45 14.63 20.08 22.80
1.8 - 145.48 7.80 26.54 185.40 6.12 14.55 20.67 25.65
2.0 2,K 144.63 8.65 29.36 205.11 6.79 14.46 21.25 12.47 28.50
2.3 L 143.35 9.93 33.55 234.35 7.79 14.34 22.13 17.81 32.77
2.6 M 142.08 11.20 37.68 263.21 8.79 14.21 23.00 23.15 37.05
2.9 N 140.82 12.46 41.76 291.68 9.78 14.08 23.87 28.50 41.32
3.2 3 139.56 13.72 45.78 319.78 10.77 13.96 24.73 33.84 45.60
3.6 4,H 137.89 15.39 51.06 356.65 12.08 13.79 25.87 40.97 51.30
4.0 5,J 136.23 17.05 56.24 392.86 13.39 13.62 27.01 48.09 57.00
4.5 6 134.17 19.11 62.59 437.20 15.00 13.42 28.42 57.00 64.12
5.0 Q 132.12 21.16 68.80 480.54 16.61 13.21 29.82 65.90 71.25
5.6 7 129.69 23.59 76.05 531.24 18.52 12.97 31.49 76.59 79.79
6.3 8 126.88 26.40 84.27 588.62 20.73 12.69 33.41 89.06 89.77
7.1 9 123.70 29.58 93.33 651.92 23.22 12.37 35.59 103.31 101.17
8.0 A 120.18 33.10 103.12 720.29 25.98 12.02 38.00 119.34 113.99
8.8 B 117.09 36.19 111.47 778.61 28.41 11.71 40.12 133.58 125.39
10.0 C 112.53 40.75 123.39 861.89 31.99 11.25 43.24 154.96 142.49
11.0 D 108.80 44.48 132.80 927.58 34.91 10.88 45.79 162.01
150 168.3 1.6 1 214.08 8.38 34.59 291.09 6.58 21.41 27.99 18.92
1.8 - 213.05 9.42 38.78 326.31 7.39 21.30 28.70 21.29
2.0 2,K 212.01 10.45 42.93 361.27 8.20 21.20 29.40 23.66
2.3 L 210.47 11.99 49.11 413.23 9.42 21.05 30.46 27.20
2.6 M 208.93 13.53 55.21 464.63 10.62 20.89 31.52 30.75
2.9 N 207.39 15.07 61.26 515.46 11.83 20.74 32.57 23.66 34.30
3.2 3 205.87 16.60 67.23 565.74 13.03 20.59 33.62 28.09 37.85
3.6 P 203.84 18.63 75.09 631.90 14.62 20.38 35.01 34.00 42.58
4.0 4,H 201.82 20.65 82.84 697.09 16.21 20.18 36.39 39.92 47.31
4.5 5,J 199.31 23.16 92.36 777.22 18.18 19.93 38.11 47.31 53.22
5.0 Q 196.81 25.65 101.70 855.85 20.14 19.68 39.82 54.70 59.14
5.6 6 193.84 28.62 112.69 948.25 22.47 19.38 41.85 63.57 66.23
6.3 7 190.40 32.06 125.18 1053.42 25.17 19.04 44.21 73.92 74.51
7.1 8 186.51 35.96 139.06 1170.19 28.23 18.65 46.88 85.75 83.98
8.0 9 182.18 40.29 154.16 1297.27 31.63 18.22 49.84 99.06 94.62
8.8 A 178.37 44.10 167.14 1406.52 34.61 17.84 52.45 110.88 104.08
10.0 B 172.73 49.73 185.86 1563.98 39.04 17.27 56.31 128.63 118.28
11.0 C 168.10 54.36 200.77 1689.50 42.67 16.81 59.48 134.48 130.10
*) see page 5
Edition: 2003-04
H 120
Page 9
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
200 219.1 1.6 - 366.10 10.93 59.02 646.52 8.58 36.61 45.19 14.54
1.8 - 364.74 12.29 66.21 725.34 9.65 36.47 46.12 16.35
2.0 1 363.39 13.64 73.37 803.72 10.71 36.34 47.05 18.17
2.3 L 361.36 15.67 84.02 920.48 12.30 36.14 48.43 20.90
2.6 K 359.34 17.68 94.59 1036.26 13.88 35.93 49.82 23.62
2.9 2 357.33 19.70 105.07 1151.07 15.46 35.73 51.20 26.35
3.2 3 355.32 21.70 115.47 1264.92 17.04 35.53 52.57 21.58 29.07
3.6 M 352.66 24.37 129.19 1415.22 19.13 35.27 54.40 26.12 32.71
4.0 N 350.00 27.03 142.75 1563.84 21.22 35.00 56.22 30.66 36.34
4.5 4,H 346.69 30.34 159.49 1747.24 23.82 34.67 58.48 36.34 40.88
5.0 P 343.40 33.63 176.00 1928.04 26.40 34.34 60.74 42.02 45.43
5.6 5 339.47 37.56 195.49 2141.61 29.49 33.95 63.43 48.83 50.88
6.3 7,J 334.91 42.12 217.81 2386.14 33.06 33.49 66.55 56.78 57.24
7.1 8 329.74 47.29 242.77 2659.58 37.12 32.97 70.09 65.87 64.51
8.0 9 323.97 53.06 270.16 2959.63 41.65 32.40 74.05 76.09 72.68
8.8 A 318.89 58.14 293.91 3219.74 45.64 31.89 77.53 85.17 79.95
10.0 B 311.34 65.69 328.47 3598.44 51.57 31.13 82.70 98.80 90.85
11.0 C 305.11 71.91 356.34 3903.74 56.45 30.51 86.96 103.30 99.94
12.5 D 295.90 81.13 396.58 4344.58 63.69 29.59 93.28 119.61 113.57
14.2 E 285.62 91.41 439.99 4820.09 71.75 28.56 100.32 138.09 129.01
250 273.0 1.6 - 571.71 13.64 92.02 1256.10 10.71 57.17 67.88 11.67
1.8 - 570.01 15.34 103.30 1410.01 12.04 57.00 69.04 13.12
2.0 - 568.32 17.03 114.52 1563.22 13.37 56.83 70.20 14.58
2.3 L 565.79 19.56 131.27 1791.78 15.35 56.58 71.93 16.77
2.6 K 563.26 22.09 147.90 2018.81 17.34 56.33 73.66 18.96
2.9 1 560.74 24.61 164.42 2244.30 19.32 56.07 75.39 21.15
3.2 2 558.23 27.12 180.83 2468.29 21.29 55.82 77.11 17.32 23.33
3.6 M 554.88 30.47 202.54 2764.61 23.92 55.49 79.41 20.96 26.25
4.0 3 551.55 33.80 224.05 3058.25 26.54 55.15 81.69 24.61 29.17
4.5 N 547.39 37.96 250.67 3421.58 29.80 54.74 84.54 29.17 32.81
5.0 4,H 543.25 42.10 276.98 3780.81 33.05 54.33 87.37 33.72 36.46
5.6 5 538.31 47.04 308.17 4206.52 36.93 53.83 90.76 39.19 40.83
6.3 7,J 532.56 52.79 344.02 4695.82 41.44 53.26 94.69 45.57 45.94
7.1 Q 526.04 59.31 384.28 5245.45 46.56 52.60 99.16 52.86 51.77
8.0 R 518.75 66.60 428.70 5851.71 52.28 51.87 104.16 61.07 58.33
8.8 8 512.31 73.04 467.40 6380.03 57.34 51.23 108.57 68.36 64.17
10.0 9 502.73 82.62 524.11 7154.09 64.86 50.27 115.13 79.30 72.92
11.0 A 494.81 90.54 570.15 7782.54 71.07 49.48 120.56 82.90 80.21
12.5 B 483.05 102.30 637.18 8697.45 80.30 48.31 128.61 95.99 91.14
14.2 C 469.90 115.45 710.25 9694.97 90.63 46.99 137.62 110.83 103.54
16.0 D 456.17 129.18 784.38 10706.79 101.41 45.62 147.02 126.54 116.66
17.5 E 444.88 140.47 843.67 11516.04 110.27 44.49 154.76 139.63 127.60
300 323.9 2.0 - 803.75 20.23 161.77 2619.81 15.88 80.37 96.25 12.29
2.3 - 800.73 23.24 185.51 3004.41 18.24 80.07 98.31 14.14
2.6 Z 797.73 26.24 209.13 3386.84 20.60 79.77 100.37 15.98
2.9 1,K 794.73 29.24 232.61 3767.11 22.96 79.47 102.43 17.82
3.2 2 791.73 32.24 255.96 4145.24 25.31 79.17 104.48 14.60 19.67
3.6 L 787.75 36.23 286.89 4646.10 28.44 78.77 107.21 17.67 22.12
4.0 3 783.77 40.20 317.58 5143.17 31.56 78.38 109.93 20.74 24.58
4.5 M 778.82 45.15 355.62 5759.22 35.45 77.88 113.33 24.58 27.66
5.0 4 773.88 50.09 393.30 6369.43 39.32 77.39 116.71 28.42 30.73
5.6 5,H 767.97 56.00 438.04 7094.03 43.96 76.80 120.76 33.03 34.42
6.3 6 761.11 62.86 489.59 7928.90 49.34 76.11 125.46 38.41 38.72
7.1 7,J 753.31 70.66 547.66 8869.36 55.47 75.33 130.80 44.56 43.63
8.0 Q 744.58 79.39 611.92 9910.08 62.32 74.46 136.78 51.47 49.17
8.8 R 736.86 87.11 668.11 10819.98 68.38 73.69 142.07 57.62 54.08
10.0 8 725.36 98.61 750.75 12158.34 77.41 72.54 149.95 66.83 61.46
11.0 9 715.84 108.13 818.13 13249.69 84.88 71.58 156.47 69.87 67.60
12.5 A 701.68 122.29 916.74 14846.53 95.99 70.17 166.16 80.91 76.82
14.2 B 685.81 138.16 1024.95 16599.07 108.45 68.58 177.04 93.41 87.27
16.0 C 669.20 154.77 1135.53 18389.93 121.49 66.92 188.41 106.65 98.33
17.5 D 655.52 168.45 1224.61 19832.56 132.23 65.55 197.79 117.68 107.55
20.0 E 633.02 190.95 1367.03 22139.05 149.89 63.30 213.20 136.07 122.91
*) see page 5
Page 10
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
350 355.6 2.0 - 970.93 22.22 195.30 3472.49 17.44 97.09 114.53 11.20
2.3 Y 967.62 25.53 224.03 3983.25 20.04 96.76 116.80 12.88
2.6 Z 964.31 28.83 252.61 4491.40 22.63 96.43 119.07 14.55
2.9 1,K 961.01 32.13 281.04 4996.92 25.22 96.10 121.33 16.23
3.2 2 957.72 35.43 309.33 5499.88 27.81 95.77 123.58 13.29 17.91
3.6 L 953.34 39.81 346.82 6166.47 31.25 95.33 126.58 16.09 20.15
4.0 3 948.96 44.18 384.05 6828.46 34.68 94.90 129.58 18.89 22.39
4.5 M 943.51 49.64 430.23 7649.56 38.96 94.35 133.32 22.39 25.19
5.0 4 938.07 55.07 476.02 8463.58 43.23 93.81 137.04 25.89 27.99
5.6 5,H 931.57 61.58 530.43 9431.13 48.34 93.16 141.49 30.09 31.35
6.3 P 924.01 69.13 593.21 10547.21 54.27 92.40 146.67 34.99 35.27
7.1 6 915.41 77.73 664.01 11806.12 61.02 91.54 152.56 40.58 39.74
8.0 7,J 905.79 87.36 742.48 13201.38 68.58 90.58 159.16 46.88 44.78
8.8 Q 897.27 95.88 811.20 14423.13 75.26 89.73 164.99 52.48 49.26
10.0 8 884.57 108.57 912.46 16223.50 85.23 88.46 173.69 60.88 55.98
11.0 9 874.06 119.09 995.20 17694.60 93.48 87.41 180.89 63.65 61.58
12.5 A 858.41 134.74 1116.55 19852.18 105.77 85.84 191.61 73.69 69.97
14.2 B 840.85 152.30 1250.14 22227.44 119.56 84.08 203.64 85.08 79.49
16.0 C 822.45 170.70 1387.12 24663.00 134.00 82.24 216.25 97.14 89.57
17.5 D 807.27 185.88 1497.83 26631.49 145.92 80.73 226.64 107.19 97.96
20.0 E 782.28 210.86 1675.57 29791.71 165.53 78.23 243.76 123.94 111.96
22.2 F 760.62 232.52 1825.15 32451.21 182.53 76.06 258.59 138.68 124.27
400 406.4 2.0 - 1271.76 25.41 255.63 5194.38 19.95 127.18 147.12 9.80
2.3 - 1267.97 29.20 293.32 5960.31 22.92 126.80 149.72 11.27
2.6 Y 1264.19 32.98 330.85 6722.82 25.89 126.42 152.31 12.74
2.9 Z 1260.41 36.76 368.20 7481.87 28.86 126.04 154.90 14.20
3.2 1 1256.64 40.53 405.39 8237.56 31.82 125.66 157.48 15.67
3.6 L 1251.62 45.56 454.72 9239.88 35.76 125.16 160.92 14.08 17.63
4.0 2 1246.60 50.57 503.75 10236.15 39.70 124.66 164.36 16.53 19.59
4.5 M 1240.35 56.82 564.62 11473.11 44.60 124.04 168.64 19.59 22.04
5.0 3 1234.12 63.05 625.04 12700.75 49.50 123.41 172.91 22.65 24.49
5.6 N 1226.66 70.51 696.94 14161.73 55.35 122.67 178.02 26.33 27.43
6.3 4,H 1217.98 79.19 779.99 15849.44 62.16 121.80 183.96 30.61 30.86
7.1 5 1208.11 89.07 873.84 17756.35 69.92 120.81 190.73 35.51 34.78
8.0 6 1197.04 100.13 978.05 19873.90 78.60 119.70 198.31 41.02 39.18
8.8 7,J 1187.25 109.92 1069.48 21731.74 86.29 118.73 205.01 45.92 43.10
10.0 R 1172.64 124.53 1204.52 24475.81 97.76 117.26 215.02 53.27 48.98
11.0 8 1160.53 136.64 1315.15 26723.82 107.26 116.05 223.32 55.69 53.88
12.5 9 1142.49 154.68 1477.89 30030.67 121.43 114.25 235.68 64.48 61.23
14.2 A 1122.21 174.96 1657.74 33685.25 137.35 112.22 249.57 74.45 69.55
16.0 B 1100.93 196.24 1842.95 37448.82 154.05 110.09 264.14 85.00 78.37
17.5 C 1083.36 213.81 1993.27 40503.28 167.84 108.34 276.18 93.79 85.72
20.0 D 1054.39 242.78 2235.83 45432.13 190.58 105.44 296.02 108.45 97.96
22.2 E 1029.22 267.95 2441.23 49605.80 210.34 102.92 313.27 121.35 108.74
25.0 F 997.62 299.55 2692.03 54702.09 235.15 99.76 334.91 137.76 122.45
450 457.0 2.0 - 1611.71 28.59 323.78 7398.31 22.44 161.17 183.61 8.71
2.3 - 1607.44 32.86 371.61 8491.31 25.79 160.74 186.54 10.02
2.6 - 1603.18 37.12 419.25 9579.96 29.14 160.32 189.45 11.33
2.9 - 1598.92 41.37 466.71 10664.22 32.48 159.89 192.37 12.63
3.2 1,K 1594.68 45.62 513.97 11744.25 35.81 159.47 195.28 13.94
3.6 L 1589.02 51.28 576.70 13177.58 40.25 158.90 199.16 12.52 15.68
4.0 2 1583.37 56.93 639.09 14603.23 44.69 158.34 203.02 14.70 17.42
4.5 M 1576.33 63.97 716.61 16374.62 50.22 157.63 207.85 17.42 19.60
5.0 3 1569.30 71.00 793.62 18134.20 55.74 156.93 212.66 20.15 21.78
5.6 N 1560.88 79.41 885.35 20230.19 62.34 156.09 218.43 23.41 24.39
6.3 4,H 1551.09 89.20 991.43 22654.17 70.02 155.11 225.13 27.22 27.44
7.1 5 1539.94 100.35 1111.45 25396.55 78.78 153.99 232.77 31.58 30.93
8.0 6 1527.45 112.85 1244.92 28446.36 88.58 152.75 241.33 36.48 34.85
8.8 7,J 1516.39 123.91 1362.20 31126.18 97.27 151.64 248.91 40.84 38.33
10.0 R 1499.87 140.43 1535.73 35091.34 110.24 149.99 260.22 47.37 43.56
11.0 8 1486.17 154.13 1678.17 38346.11 120.99 148.62 269.61 49.52 47.91
12.5 9 1465.74 174.55 1888.18 43144.82 137.03 146.57 283.60 57.34 54.45
14.2 A 1442.76 197.54 2120.95 48463.80 155.07 144.28 299.34 66.21 61.85
16.0 B 1418.63 221.67 2361.46 53959.38 174.01 141.86 315.87 75.59 69.69
17.5 C 1398.67 241.63 2557.27 58433.60 189.68 139.87 329.54 83.41 76.23
20.0 D 1365.72 274.58 2874.46 65681.48 215.54 136.57 352.11 96.44 87.12
22.2 E 1337.05 303.24 3144.31 71847.58 238.05 133.71 371.75 107.91 96.70
25.0 F 1301.00 339.29 3475.50 79415.12 266.34 130.10 396.44 122.51 108.89
30.0 S 1576.33 450.50 5085.56 129173.13 353.65 157.63 511.28 133.66 117.55
*) see page 5
Footnotes see page 2.
Edition: 2003-04
H 120
Page 11
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
500 508.0 2.0 - 1995.04 31.79 400.60 10175.32 24.96 199.50 224.46 7.84
2.3 - 1990.29 36.54 459.88 11680.89 28.68 199.03 227.71 9.01
2.6 - 1985.55 41.28 518.94 13181.10 32.41 198.55 230.96 10.19
2.9 - 1980.81 46.02 577.79 14675.85 36.12 198.08 234.21 11.36
3.2 1,K 1976.08 50.75 636.43 16165.34 39.84 197.61 237.45 12.54
3.6 L 1969.78 57.05 714.29 18143.06 44.78 196.98 241.76 11.27 14.11
4.0 2 1963.50 63.33 791.78 20111.24 49.72 196.35 246.07 13.22 15.67
4.5 M 1955.65 71.18 888.12 22558.26 55.88 195.56 251.44 15.67 17.63
5.0 3 1947.82 79.01 983.88 24990.61 62.02 194.78 256.81 18.12 19.59
5.6 N 1938.44 88.39 1098.04 27890.16 69.38 193.84 263.23 21.06 21.94
6.3 4,H 1927.53 99.30 1230.18 31246.51 77.95 192.75 270.70 24.49 24.69
7.1 P 1915.10 111.73 1379.83 35047.65 87.71 191.51 279.22 8.41 27.82
8.0 5 1901.17 125.66 1546.46 39279.96 98.65 190.12 288.76 32.82 31.35
8.8 Q 1888.82 138.01 1693.04 43003.27 108.34 188.88 297.22 36.74 34.48
10.0 6 1870.38 156.45 1910.25 48520.25 122.81 187.04 309.85 42.61 39.18
11.0 7,J 1855.08 171.75 2088.82 53055.98 134.82 185.51 320.33 44.55 43.10
12.5 8 1832.25 194.58 2352.58 59755.41 152.75 183.22 335.97 51.59 48.98
14.2 9 1806.54 220.29 2645.61 67198.62 172.93 180.65 353.58 59.56 55.64
16.0 A 1779.52 247.31 2949.18 74909.04 194.14 177.95 372.09 68.00 62.70
17.5 B 1757.16 269.67 3196.93 81202.14 211.69 175.72 387.40 75.03 68.57
20.0 C 1720.21 306.62 3599.52 91427.79 240.70 172.02 412.72 86.76 78.37
22.2 D 1688.02 338.81 3943.28 100159.30 265.97 168.80 434.77 97.08 86.99
25.0 E 1647.48 379.35 4366.86 110918.31 297.79 164.75 462.54 110.21 97.96
28.0 F 1604.60 422.23 4803.78 122016.04 331.45 160.46 491.91 124.28 109.72
600 610.0 2.0 - 2884.26 38.20 578.77 17652.47 29.99 288.43 318.41 6.53
2.3 - 2878.56 43.91 664.60 20270.30 34.47 287.86 322.33 7.51
2.6 - 2872.85 49.61 750.18 22880.57 38.95 287.29 326.23 8.48
2.9 - 2867.16 55.31 835.50 25482.83 43.42 286.72 330.13 9.46
3.2 1 2861.46 61.00 920.58 28077.65 47.89 286.15 334.03 10.44
3.6 L 2853.88 68.58 1033.61 31525.10 53.84 285.39 339.23 11.75
4.0 K 2846.31 76.15 1146.19 34958.84 59.78 284.63 344.41 13.05
4.5 2 2836.87 85.60 1286.29 39231.89 67.20 283.69 350.88 13.05 14.68
5.0 G 2827.43 95.03 1425.69 43483.62 74.60 282.74 357.34 15.09 16.32
5.6 3 2816.14 106.33 1592.06 48557.82 83.47 281.61 365.08 17.54 18.27
6.3 4,H 2802.98 119.48 1784.89 54439.05 93.80 280.30 374.09 20.40 20.56
7.1 P 2787.99 134.48 2003.62 61110.36 105.57 278.80 384.36 23.66 23.17
8.0 5 2771.17 151.30 2247.59 68551.38 118.77 277.12 395.89 27.33 26.11
8.8 6 2756.26 166.21 2462.59 75109.02 130.47 275.63 406.10 30.59 28.72
10.0 7 2733.97 188.50 2781.86 84846.61 147.97 273.40 421.37 35.49 32.63
11.0 Q 2715.47 207.00 3044.95 92870.87 162.49 271.55 434.04 37.10 35.90
12.5 8,J 2687.83 234.64 3434.58 104754.75 184.19 268.78 452.97 42.96 40.79
14.2 9 2656.68 265.79 3868.98 118004.02 208.65 265.67 474.31 49.60 46.34
16.0 A 2623.89 298.58 4320.70 131781.45 234.38 262.39 496.77 56.63 52.21
17.5 B 2596.72 325.74 4690.75 143067.75 255.71 259.67 515.38 62.49 57.11
20.0 C 2551.76 370.71 5294.74 161489.69 291.01 255.18 546.18 72.25 65.27
22.2 D 2512.51 409.95 5813.28 177304.98 321.81 251.25 573.06 80.84 72.44
25.0 E 2463.01 459.46 6455.95 196906.47 360.67 246.30 606.98 91.78 81.58
28.0 F 2410.51 511.95 7123.46 217265.58 401.88 241.05 642.94 103.50 91.37
30.0 S 2375.83 546.64 7556.59 230475.89 429.11 237.58 666.69 111.31 97.90
32.0 T 2341.40 581.07 7980.36 243401.11 456.14 234.14 690.28 119.12 104.42
36.0 U 2273.29 649.18 8800.42 268412.69 509.61 227.33 736.93 134.74 117.48
*) see page 5
Edition: 2003-04
H 120
Page 12
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
700 711.0 2.9 - 3905.84 64.51 1137.39 40434.20 50.64 390.58 441.23 8.12
3.2 - 3899.20 71.16 1253.47 44560.71 55.86 389.92 445.78 8.96
3.6 - 3890.35 80.01 1407.77 50046.09 62.80 389.03 451.84 10.08
4.0 1,K 3881.51 88.84 1561.54 55512.72 69.74 388.15 457.89 11.20
4.5 L 3870.47 99.88 1753.02 62319.87 78.41 387.05 465.45 11.20 12.60
5.0 2,G 3859.45 110.90 1943.69 69098.07 87.06 385.95 473.00 12.95 14.00
5.6 3 3846.25 124.10 2171.41 77193.79 97.42 384.63 482.04 15.05 15.68
6.3 N 3830.88 139.47 2435.61 86585.95 109.49 383.09 492.58 17.50 17.64
7.1 4,H 3813.35 157.01 2735.62 97251.41 123.25 381.33 504.59 20.30 19.88
8.0 P 3793.67 176.68 3070.67 109162.15 138.70 379.37 518.06 23.45 22.40
8.8 5 3776.22 194.13 3366.30 119672.07 152.39 377.62 530.01 26.25 24.64
10.0 6 3750.13 220.23 3805.95 135301.41 172.88 375.01 547.89 30.45 28.00
11.0 7 3728.45 241.90 4168.83 148201.95 189.89 372.85 562.74 31.83 30.80
12.5 R 3696.05 274.30 4707.27 167343.28 215.33 369.61 584.93 36.86 35.00
14.2 8 3659.51 310.85 5309.01 188735.38 244.01 365.95 609.97 42.55 39.76
16.0 9 3621.01 349.35 5936.42 211039.83 274.24 362.10 636.34 48.59 44.80
17.5 A 3589.08 381.27 6451.70 229357.94 299.30 358.91 658.21 53.61 48.99
20.0 B 3536.18 434.17 7295.38 259350.91 340.82 353.62 694.44 61.99 55.99
22.2 C 3489.96 480.39 8022.39 285195.97 377.11 349.00 726.10 69.36 62.15
25.0 D 3431.57 538.78 8927.07 317357.44 422.94 343.16 766.10 78.74 69.99
28.0 E 3369.55 600.80 9871.20 350921.03 471.63 336.96 808.58 88.79 78.39
30.0 F 3328.53 641.83 10486.36 372790.22 503.83 332.85 836.69 95.50 83.99
32.0 S 3287.75 682.61 11090.30 394260.00 535.85 328.77 864.62 102.20 89.59
36.0 T 3206.95 763.41 12265.00 436020.88 599.27 320.69 919.97 115.60 100.79
800 813.0 3.2 - 5109.83 81.41 1641.69 66734.70 63.91 510.98 574.89 7.84
3.6 - 5099.70 91.54 1844.17 74965.54 71.86 509.97 581.83 8.81
4.0 1,K 5089.58 101.66 2046.05 83171.76 79.80 508.96 588.76 9.79
4.5 L 5076.94 114.30 2297.55 93395.52 89.72 507.69 597.42 9.79 11.02
5.0 2,G 5064.32 126.92 2548.12 103581.16 99.63 506.43 606.06 11.32 12.24
5.6 M 5049.19 142.05 2847.58 115753.92 111.51 504.92 616.42 13.16 13.71
6.3 3 5031.58 159.66 3195.23 129886.01 125.33 503.16 628.49 15.30 15.43
7.1 N 5011.48 179.76 3590.34 145947.16 141.11 501.15 642.26 17.75 17.38
8.0 4,H 4988.92 202.32 4031.99 163900.53 158.82 498.89 657.71 20.51 19.59
8.8 P 4968.91 222.33 4422.07 179757.09 174.53 496.89 671.42 22.95 21.55
10.0 5 4938.97 252.27 5002.80 203363.86 198.03 493.90 691.93 26.63 24.48
11.0 Q 4914.09 277.15 5482.73 222872.95 217.56 491.41 708.97 27.84 26.93
12.5 6 4876.88 314.36 6195.83 251860.31 246.77 487.69 734.46 32.23 30.61
14.2 7 4834.89 356.35 6994.22 284315.06 279.73 483.49 763.22 37.22 34.77
16.0 8 4790.62 400.62 7828.33 318221.69 314.48 479.06 793.55 42.49 39.18
17.5 9 4753.89 437.35 8514.67 346121.53 343.32 475.39 818.71 46.89 42.85
20.0 A 4692.98 498.26 9641.07 391909.28 391.13 469.30 860.43 54.21 48.97
22.2 B 4639.71 551.53 10614.38 431474.53 432.95 463.97 896.92 60.66 54.36
25.0 C 4572.34 618.89 11829.19 480856.50 485.83 457.23 943.07 68.86 61.21
28.0 D 4500.72 690.52 13101.42 532572.88 542.06 450.07 992.13 77.65 68.56
30.0 E 4453.28 737.96 13932.95 566374.25 579.30 445.33 1024.63 83.51 73.45
32.0 F 4406.09 785.15 14751.32 599641.19 616.34 440.61 1056.95 89.37 78.35
36.0 S 4312.47 878.77 16349.19 664594.50 689.83 431.25 1121.08 101.10 88.14
40.0 T 4219.86 971.38 17896.13 727477.75 762.53 421.99 1184.52 112.82
*) see page 5
Edition: 2003-04
H 120
Page 13
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
900 914.0 3.6 - 6458.22 102.96 2334.27 106676.05 80.83 645.82 726.65 7.84
4.0 Y 6446.83 114.35 2590.22 118373.04 89.77 644.68 734.45 8.71
4.5 Z 6432.61 128.58 2909.22 132951.16 100.93 643.26 744.19 8.71 9.80
5.0 1,K 6418.40 142.79 3227.15 147480.70 112.09 641.84 753.93 10.07 10.89
5.6 L 6401.37 159.81 3607.28 164852.77 125.45 640.14 765.59 11.71 12.20
6.3 2 6381.53 179.65 4048.85 185032.30 141.03 638.15 779.18 13.61 13.72
7.1 M 6358.90 202.29 4551.01 207981.03 158.80 635.89 794.69 15.79 15.46
8.0 N 6333.48 227.70 5112.73 233651.67 178.75 633.35 812.09 18.24 17.42
8.8 3 6310.93 250.25 5609.20 256340.44 196.45 631.09 827.54 20.42 19.17
10.0 4,H 6277.19 284.00 6348.95 290147.19 222.94 627.72 850.66 23.68 21.78
11.0 5 6249.13 312.05 6960.89 318112.47 244.96 624.91 869.88 24.76 23.96
12.5 6 6207.17 354.02 7871.08 359708.50 277.90 620.72 898.62 28.67 27.22
14.2 7 6159.78 401.41 8891.57 406344.88 315.10 615.98 931.08 33.10 30.93
16.0 8 6109.80 451.38 9959.34 455141.78 354.34 610.98 965.32 37.79 34.85
17.5 9 6068.31 492.88 10839.23 495352.59 386.91 606.83 993.74 41.70 38.11
20.0 A 5999.47 561.72 12285.81 561461.44 440.95 599.95 1040.89 48.22 43.56
22.2 B 5939.21 621.97 13538.44 618706.50 488.25 593.92 1082.17 53.95 48.35
25.0 C 5862.97 698.22 15105.41 690317.06 548.10 586.30 1134.40 61.25 54.45
28.0 D 5781.82 779.37 16750.84 765513.25 611.80 578.18 1189.98 69.07 60.98
30.0 E 5728.03 833.15 17828.78 814775.31 654.02 572.80 1226.83 74.29 65.34
32.0 F 5674.50 886.68 18891.69 863350.13 696.05 567.45 1263.50 79.50 69.69
36.0 S 5568.19 992.99 20972.94 958463.31 779.50 556.82 1336.32 89.92 78.40
40.0 T 5462.88 1098.30 22995.71 1050903.75 862.17 546.29 1408.45 100.35
1000 1016.0 3.6 - 7992.82 114.50 2887.76 146698.31 89.88 799.28 889.16 7.05
4.0 Y 7980.15 127.17 3204.83 162805.16 99.83 798.01 897.84 7.84
4.5 Z 7964.32 143.00 3600.10 182885.30 112.25 796.43 908.69 7.84 8.82
5.0 1,K 7948.51 158.81 3994.20 202905.58 124.66 794.85 919.52 9.06 9.80
5.6 L 7929.56 177.76 4465.58 226851.59 139.54 792.96 932.50 10.53 10.97
6.3 2 7907.48 199.84 5013.37 254679.20 156.87 790.75 947.62 12.25 12.34
7.1 M 7882.28 225.04 5636.64 286341.44 176.66 788.23 964.88 14.20 13.91
8.0 N 7853.98 253.34 6334.25 321779.84 198.87 785.40 984.27 16.41 15.67
8.8 P 7828.87 278.45 6951.18 353120.09 218.58 782.89 1001.47 18.37 17.24
10.0 3,H 7791.28 316.04 7871.06 399849.78 248.09 779.13 1027.22 21.31 19.59
11.0 Q 7760.02 347.30 8632.55 438533.47 272.63 776.00 1048.63 22.28 21.55
12.5 4 7713.25 394.07 9766.20 496123.03 309.35 771.32 1080.67 25.79 24.49
14.2 5 7660.41 446.91 11038.63 560762.38 350.82 766.04 1116.87 29.78 27.82
16.0 6 7604.67 502.65 12371.64 628479.38 394.58 760.47 1155.05 34.00 31.35
17.5 7 7558.37 548.95 13471.37 684345.69 430.93 755.84 1186.77 37.52 34.29
20.0 8 7481.51 625.81 15281.97 776323.94 491.26 748.15 1239.41 43.38 39.18
22.2 9 7414.21 693.11 16852.45 856104.38 544.09 741.42 1285.51 48.54 43.50
25.0 A 7328.99 778.33 18820.60 956086.50 610.99 732.90 1343.89 55.10 48.98
28.0 B 7238.23 869.09 20891.70 1061298.13 682.24 723.82 1406.06 62.14 54.86
30.0 C 7178.04 929.28 22251.03 1130352.13 729.49 717.80 1447.29 66.83 58.78
32.0 D 7118.09 989.22 23593.40 1198544.63 776.54 711.81 1488.35 71.52 62.70
36.0 E 6998.97 1108.35 26227.84 1332374.38 870.06 699.90 1569.95 80.90 70.53
40.0 F 6880.84 1226.48 28796.15 1462844.63 962.79 688.08 1650.87 90.28
1200 1220.0 5.6 K 11476.22 213.65 6456.71 393859.41 167.71 1147.62 1315.34 8.77
6.3 1,G 11449.65 240.22 7251.30 442329.19 188.57 1144.97 1333.53 10.20
7.1 M 11419.33 270.54 8156.00 497516.03 212.37 1141.93 1354.31 11.83
8.0 2 11385.26 304.61 9169.53 559341.44 239.12 1138.53 1377.64 13.66
8.8 N 11355.02 334.85 10066.60 614062.44 262.86 1135.50 1398.36 15.30
10.0 P 11309.73 380.13 11405.54 695737.94 298.40 1130.97 1429.38 17.74
11.0 H 11272.07 417.80 12515.20 763427.31 327.97 1127.21 1455.18 18.55
12.5 3,J 11215.68 474.18 14169.29 864327.00 372.23 1121.57 1493.80 21.48
14.2 5 11151.95 537.92 16028.95 977765.75 422.26 1115.20 1537.46 24.80
16.0 6 11084.67 605.20 17980.69 1096822.13 475.08 1108.47 1583.55 28.31
17.5 7 11028.76 661.11 19593.66 1195213.13 518.97 1102.88 1621.85 31.24
20.0 8 10935.88 753.98 22254.85 1357545.75 591.88 1093.59 1685.46 36.13
22.2 9 10854.48 835.39 24568.89 1498702.13 655.78 1085.45 1741.23 40.42
25.0 A 10751.32 938.55 27476.66 1676076.00 736.76 1075.13 1811.89 45.89
28.0 B 10641.33 1048.54 30546.15 1863315.13 823.10 1064.13 1887.24 51.75
30.0 C 10568.32 1121.55 32566.29 1986543.38 880.42 1056.83 1937.25 55.65
32.0 D 10495.56 1194.31 34565.63 2108503.25 937.53 1049.56 1987.09 59.56
36.0 E 10350.79 1339.07 38502.51 2348653.00 1051.17 1035.08 2086.25 67.37
40.0 F 10207.04 1482.83 42357.95 2583835.00 1164.02 1020.70 2184.73 75.18
*) see page 5
Edition: 2003-04
H 120
Page 14
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
1400 1420.0 6.3 L 15556.97 279.80 9845.13 699004.56 219.64 1555.70 1775.34 8.76
7.1 1,G 15521.62 315.15 11076.53 786433.31 247.39 1552.16 1799.56 10.16
8.0 M 15481.89 354.87 12456.88 884438.25 278.58 1548.19 1826.77 11.74
8.8 2 15446.63 390.14 13679.37 971235.25 306.26 1544.66 1850.92 13.14
10.0 N 15393.80 442.96 15505.32 1100877.38 347.73 1539.38 1887.11 15.24
11.0 H 15349.85 486.92 17019.77 1208403.50 382.23 1534.99 1917.21 15.94
12.5 J 15284.04 552.72 19279.29 1368829.63 433.89 1528.40 1962.29 18.45
14.2 3 15209.63 627.14 21822.53 1549399.25 492.30 1520.96 2013.27 21.31
16.0 5 15131.04 705.73 24495.09 1739151.63 554.00 1513.10 2067.10 24.33
17.5 6 15065.70 771.06 26706.43 1896156.25 605.29 1506.57 2111.86 26.84
20.0 7 14957.12 879.65 30360.17 2155571.75 690.52 1495.71 2186.23 31.04
22.2 8 14861.89 974.87 33542.80 2381538.25 765.28 1486.19 2251.47 34.73
25.0 9 14741.14 1095.63 37549.45 2666010.50 860.07 1474.11 2334.18 39.43
28.0 A 14612.30 1224.47 41788.14 2966957.25 961.21 1461.23 2422.44 44.46
30.0 B 14526.72 1310.04 44583.02 3165394.25 1028.38 1452.67 2481.06 47.81
32.0 C 14441.40 1395.37 47353.35 3362087.50 1095.37 1444.14 2539.51 51.17
36.0 D 14271.50 1565.27 52820.93 3750285.75 1228.73 1427.15 2655.89 57.88
40.0 E 14102.61 1734.16 58192.04 4131634.25 1361.31 1410.26 2771.58 64.59
1600 1620.0 7.1 L 20252.23 359.76 14443.19 1169898.63 282.41 2025.22 2307.64 8.91
8.0 1,G 20206.85 405.14 16246.93 1316001.50 318.03 2020.68 2338.72 10.29
8.8 M 20166.56 445.43 17845.07 1445450.63 349.66 2016.66 2366.32 11.52
10.0 2 20106.19 505.80 20233.43 1638907.63 397.05 2010.62 2407.67 13.36
11.0 H 20055.96 556.03 22215.51 1799456.00 436.48 2005.60 2442.08 13.97
12.5 J 19980.73 631.26 25174.70 2039150.13 495.54 1998.07 2493.61 16.18
14.2 P 19895.63 716.36 28508.36 2309176.75 562.34 1989.56 2551.90 18.68
16.0 3 19805.73 806.26 32014.83 2593200.75 632.91 1980.57 2613.49 21.32
17.5 5 19730.97 881.02 34918.76 2828419.50 691.60 1973.10 2664.70 23.53
20.0 6 19606.68 1005.31 39722.17 3217495.50 789.17 1960.67 2749.84 27.21
22.2 7 19497.63 1114.36 43911.59 3556839.00 874.77 1949.76 2824.54 30.44
25.0 8 19359.28 1252.71 49193.05 3984636.75 983.38 1935.93 2919.31 34.56
28.0 9 19211.59 1400.40 54789.41 4437942.00 1099.31 1921.16 3020.47 38.97
30.0 A 19113.45 1498.54 58484.68 4737258.50 1176.35 1911.34 3087.70 41.91
32.0 B 19015.56 1596.43 62151.66 5034284.50 1253.20 1901.56 3154.75 44.85
36.0 C 18820.53 1791.46 69401.25 5621501.50 1406.30 1882.05 3288.35 50.74
40.0 D 18626.50 1985.49 76539.29 6199682.00 1558.61 1862.65 3421.26 56.62
1800 1820.0 8.8 1,G 25514.80 500.72 22563.74 2053299.88 393.07 2551.48 2944.55 10.25
10.0 2 25446.90 568.63 25589.88 2328679.25 446.37 2544.69 2991.06 11.89
11.0 M 25390.38 625.15 28102.39 2557317.25 490.74 2539.04 3029.78 12.44
12.5 H 25305.72 709.80 31855.48 2898848.50 557.20 2530.57 3087.77 14.40
14.2 J 25209.95 805.58 36086.36 3283858.00 632.38 2520.99 3153.37 16.62
16.0 P 25108.74 906.79 40539.86 3689126.75 711.83 2510.87 3222.70 18.98
17.5 3 25024.55 990.98 44230.67 4024991.00 777.92 2502.46 3280.37 20.94
20.0 5 24884.55 1130.97 50340.78 4581010.50 887.81 2488.46 3376.27 24.22
22.2 6 24761.68 1253.85 55675.24 5066446.50 984.27 2476.17 3460.44 27.10
25.0 7 24605.74 1409.79 62407.43 5679075.00 1106.69 2460.57 3567.26 30.76
28.0 8 24439.21 1576.33 69549.91 6329041.00 1237.42 2443.92 3681.34 34.69
30.0 9 24328.49 1687.04 74271.29 6758686.50 1324.32 2432.85 3757.17 37.31
32.0 A 24218.04 1797.49 78960.55 7185409.50 1411.03 2421.80 3832.84 39.92
36.0 B 23997.87 2017.66 88243.46 8030154.50 1583.86 2399.79 3983.65 45.16
40.0 C 23778.71 2236.81 97399.74 8863376.00 1755.90 2377.87 4133.77 50.40
*) see page 5
Edition: 2003-04
H 120
Page 15
W e i g h t s 10)
Pipe Water- Summary:
8) filling GR+GW 12) 9) 12)
DN Da s *) Fi FR W J GR GW GS Pcs Pss
mm mm cm2 cm2 cm3 cm4 kg/m kg/m kg/m bar bar
2000 2020.0 10.0 1,G 31415.93 631.46 31574.57 3189031.50 495.70 3141.59 3637.29 10.72
11.0 2 31353.13 694.26 34680.41 3502721.50 544.99 3135.31 3680.31 11.20
12.5 H 31259.04 788.34 39321.70 3971491.25 618.85 3125.90 3744.75 12.97
14.2 J 31152.59 894.80 44556.59 4500215.00 702.42 3115.26 3817.68 14.98
16.0 N 31040.07 1007.32 50070.19 5057089.00 790.75 3104.01 3894.75 17.10
17.5 P 30946.46 1100.93 54642.06 5518848.00 864.23 3094.65 3958.88 18.87
20.0 3 30790.75 1256.64 62215.97 6283812.50 986.46 3079.07 4065.54 21.82
22.2 5 30654.05 1393.33 68833.72 6952205.50 1093.77 3065.41 4159.17 24.41
25.0 6 30480.52 1566.87 77192.55 7796446.50 1229.99 3048.05 4278.04 27.72
28.0 7 30295.13 1752.25 86069.71 8693040.00 1375.52 3029.51 4405.03 31.25
30.0 8 30171.86 1875.53 91942.80 9286222.00 1472.29 3017.19 4489.48 33.61
32.0 9 30048.83 1998.56 97780.02 9875781.00 1568.87 3004.88 4573.75 35.97
36.0 A 29803.54 2243.85 109347.53 11044100.00 1761.42 2980.35 4741.78 40.69
40.0 B 29559.24 2488.14 120773.41 12198114.00 1953.19 2955.92 4909.12 45.41
2200 2220.0 10.0 1 38013.27 694.29 38187.57 4238820.50 545.02 3801.33 4346.35 9.75
11.0 2 37944.19 763.38 41949.56 4656401.00 599.25 3794.42 4393.67 10.19
12.5 H 37840.68 866.88 47573.26 5280631.50 680.50 3784.07 4464.57 11.80
14.2 J 37723.55 984.02 53918.77 5984982.50 772.45 3772.35 4544.81 13.63
16.0 N 37599.71 1107.85 60605.84 6727248.00 869.66 3759.97 4629.63 15.56
17.5 P 37496.68 1210.89 66153.12 7342995.50 950.55 3749.67 4700.21 17.17
20.0 3 37325.26 1382.30 75347.85 8363610.00 1085.11 3732.53 4817.63 19.85
22.2 5 37174.75 1532.81 83386.91 9255947.00 1203.26 3717.48 4920.73 22.21
25.0 6 36983.61 1723.95 93548.48 10383881.00 1353.30 3698.36 5051.66 25.22
28.0 7 36779.38 1928.18 104348.76 11582712.00 1513.62 3677.94 5191.56 28.44
30.0 8 36643.54 2064.03 111499.27 12376418.00 1620.26 3664.35 5284.61 30.58
32.0 9 36507.95 2199.62 118610.09 13165718.00 1726.70 3650.79 5377.49 32.73
36.0 A 36237.52 2470.05 132713.56 14731203.00 1938.99 3623.75 5562.74 37.02
40.0 B 35968.09 2739.47 146660.30 16279292.00 2150.48 3596.81 5747.29 41.32
*) see page 5
Edition: 2003-04
Standard
Seamless Tubes
Excerpt from DIN2391 H 170
Page 1 of 6
Example of Designation of a seamless tube with outside diameter = 25 mm and wallthickness = 3,0 mm, with
Designation: certificate 3.1B, material: St35, quality C, normalized (NBK), manufacturing length, plain ends
Partnumber
171139601 25 x 3,0 TUBE SEAMLESS ST35/NBK/QUAL.C
H170/DIN2391 CERT:3.1B
Partnumbering Code
Position of Part No.
1. - 2. 3. 4. 5. - 6. 7. - 8. 9.
3) Length / 4) 1) Wallthick- 9)
Kind of Part Surface finish End- Material ness Certificate
Cd. Cd. preparation Cd. Cd. Cd. Cd. Cd.
annealed 0 manufacturing St35 (Quality A) 6) 30 *) 2) 0 3.1B 1
Tubes 17 (GBK) length 1 St52 (Quality C) 32 2.2 W
seamless normalized 1 L=4-7m St37.4 34 3.1A A
(NBK) plain ends St35 (Quality C) 39 3.1C C
heat treated
and pickled 2 1.4541 72
(type c2 or h) fixed length 1.4571 73
cold finished 3 L=6m 4 1.4306 74
NBK, phosphated 4 plain ends 1.4301 75
and oiled 1.4436 76
cold finished 1.4401 77
bright annealed 5 1.4404 78
finish m 1.4539 NL
outside A3C, 8) 6 1.4362 RK
inside oiled SF-CuF25 7) 84
acc. to order 9 soft annealed
SF-CuF25 7) 85
1) Materials:
St35 (quality A or C) acc. to DIN2391
St52 (quality C) acc. to DIN2391
St37.4 acc. to 1630
SF-CuF25 acc. to DIN17671
Stainless tubes acc. to DIN17458 (only DIN2391 / quality C / certificate 3.1B)
Stainless tubes acc. to DIN17456 (only DIN2391 / quality C / certificate 2.2)
1.4539 acc. to EN10088
1.4362 acc. to VdTÜV-Wbl.496
5) Weight for stainless steel tubes shall be calculated by following formula: Grss = GR x 1,01528.
8) outside galvanized and yellow chromated – A3C (thickness 8 – 12 μm), inside oiled
Page 2
Index Formulas
Da mm Outside diameter
WD mm Wallthickness acc.to DIN2391
Wallth. Code Wallthickness code acc.to VAI-Standard. H0017
2
Di . p
Fi cm2 Cross section Fi = ¾¾¾ . 10 -2
4
p Da4 _ Di4
W cm3 Sectional modulas W = ¾ . ¾¾¾¾ . 10-3
32 Da
p
J cm4 Moment of inertia J=¾ . (Da4 - Di4).10 -4
64
wheras
100 - c1
Sv = ¾¾¾¾¾ . WD
100
c1 = 10 % for all diameters and wallthicknesses (DIN2391)
v = joint efficiency = 1
Di mm Inside diameter Di = Da - 2s
Page 3
DA WD Wall. F FR W JA GR GW GS PSTAT
thick. St35/NBK
mm mm code cm 2 cm 2 cm 3 cm 4 kg/m kg/m kg/m bareff
4 0,5 3 0,07 0,05 0,00 0,00 0,04 0,01 0,05 300,00
1,0 4 0,03 0,09 0,01 0,00 0,07 0,00 0,08 600,00
1,5 5 0,01 0,12 0,01 0,00 0,09 0,00 0,09 900,00
5 0,5 3 0,13 0,07 0,01 0,00 0,06 0,01 0,07 240,00
1,0 4 0,07 0,13 0,01 0,00 0,10 0,01 0,11 480,00
1,5 5 0,03 0,16 0,01 0,00 0,13 0,00 0,13 720,00
6 0,5 3 0,20 0,09 0,01 0,00 0,07 0,02 0,09 212,50
1,0 4 0,13 0,16 0,02 0,01 0,12 0,01 0,14 425,00
1,5 5 0,07 0,21 0,02 0,01 0,17 0,01 0,17 637,50
2,0 6 0,03 0,25 0,02 0,01 0,20 0,00 0,20 850,00
2,5 7 0,01 0,27 0,02 0,01 0,22 0,00 0,22 1062,50
8 0,5 3 0,38 0,12 0,02 0,01 0,09 0,04 0,13 159,38
1,0 4 0,28 0,22 0,03 0,01 0,17 0,03 0,20 318,75
1,5 5 0,20 0,31 0,04 0,02 0,24 0,02 0,26 478,13
2,0 6 0,13 0,38 0,05 0,02 0,30 0,01 0,31 637,50
2,5 7 0,07 0,43 0,05 0,02 0,34 0,01 0,35 796,88
10 0,5 3 0,64 0,15 0,03 0,02 0,12 0,06 0,18 135,00
1,0 4 0,50 0,28 0,06 0,03 0,22 0,05 0,27 270,00
1,5 5 0,38 0,40 0,07 0,04 0,31 0,04 0,35 405,00
2,0 6 0,28 0,50 0,09 0,04 0,39 0,03 0,42 540,00
2,5 7 0,20 0,59 0,09 0,05 0,46 0,02 0,48 675,00
12 0,5 3 0,95 0,18 0,05 0,03 0,14 0,10 0,24 112,50
1,0 4 0,79 0,35 0,09 0,05 0,27 0,08 0,35 225,00
1,5 5 0,64 0,49 0,12 0,07 0,39 0,06 0,45 337,50
2,0 6 0,50 0,63 0,14 0,08 0,49 0,05 0,54 450,00
2,5 7 0,38 0,75 0,15 0,09 0,59 0,04 0,62 562,50
3,0 8 0,28 0,85 0,16 0,10 0,67 0,03 0,69 675,00
14 1,0 3 1,13 0,41 0,12 0,09 0,32 0,11 0,43 192,86
1,5 4 0,95 0,59 0,17 0,12 0,46 0,10 0,56 289,29
2,0 5 0,79 0,75 0,20 0,14 0,59 0,08 0,67 385,71
2,5 6 0,64 0,90 0,22 0,16 0,71 0,06 0,77 482,14
3,0 7 0,50 1,04 0,24 0,17 0,81 0,05 0,86 578,57
3,5 8 0,38 1,15 0,25 0,18 0,91 0,04 0,94 705,00
15 1,0 3 1,33 0,44 0,14 0,11 0,35 0,13 0,48 180,00
1,5 4 1,13 0,64 0,20 0,15 0,50 0,11 0,61 270,00
2,0 5 0,95 0,82 0,24 0,18 0,64 0,10 0,74 360,00
2,5 6 0,79 0,98 0,27 0,20 0,77 0,08 0,85 450,00
3,0 7 0,64 1,13 0,29 0,22 0,89 0,06 0,95 540,00
3,5 8 0,50 1,26 0,30 0,23 0,99 0,05 1,04 658,00
16 1,0 3 1,54 0,47 0,17 0,13 0,37 0,15 0,52 168,75
1,5 4 1,33 0,68 0,23 0,18 0,54 0,13 0,67 253,13
2,0 5 1,13 0,88 0,27 0,22 0,69 0,11 0,80 337,50
2,5 6 0,95 1,06 0,31 0,25 0,83 0,10 0,93 421,88
3,0 7 0,79 1,23 0,34 0,27 0,96 0,08 1,04 506,25
3,5 8 0,64 1,37 0,36 0,29 1,08 0,06 1,14 616,88
4,0 9 0,50 1,51 0,38 0,30 1,18 0,05 1,23 705,00
18 1,0 3 2,01 0,53 0,22 0,19 0,42 0,20 0,62 150,00
1,5 4 1,77 0,78 0,30 0,27 0,61 0,18 0,79 225,00
2,0 5 1,54 1,01 0,36 0,33 0,79 0,15 0,94 300,00
2,5 6 1,33 1,22 0,42 0,38 0,96 0,13 1,09 375,00
3,0 7 1,13 1,41 0,46 0,41 1,11 0,11 1,22 450,00
3,5 8 0,95 1,59 0,49 0,44 1,25 0,10 1,35 548,33
4,0 9 0,79 1,76 0,52 0,47 1,38 0,08 1,46 626,67
Edition: 2003-08
H 170
Page 4
DA WD Wall. F FR W JA GR GW GS PSTAT
thick. St35/NBK
mm mm code cm 2 cm 2 cm 3 cm 4 kg/m kg/m kg/m bareff
20 1,0 2 2,54 0,60 0,27 0,27 0,47 0,25 0,72 135,00
1,5 3 2,27 0,87 0,38 0,38 0,68 0,23 0,91 202,50
2,0 4 2,01 1,13 0,46 0,46 0,89 0,20 1,09 270,00
2,5 5 1,77 1,37 0,54 0,54 1,08 0,18 1,26 337,50
3,0 6 1,54 1,60 0,60 0,60 1,26 0,15 1,41 405,00
3,5 7 1,33 1,81 0,65 0,65 1,42 0,13 1,56 493,50
4,0 8 1,13 2,01 0,68 0,68 1,58 0,11 1,69 564,00
4,5 1 0,95 2,19 0,71 0,71 1,72 0,10 1,82 634,50
5,0 9 0,79 2,36 0,74 0,74 1,85 0,08 1,93 705,00
22 1,0 2 3,14 0,66 0,33 0,36 0,52 0,31 0,83 122,73
1,5 3 2,84 0,97 0,46 0,51 0,76 0,28 1,04 184,09
2,0 4 2,54 1,26 0,58 0,63 0,99 0,25 1,24 245,45
2,5 5 2,27 1,53 0,67 0,74 1,20 0,23 1,43 306,82
3,0 6 2,01 1,79 0,75 0,83 1,41 0,20 1,61 368,18
3,5 7 1,77 2,03 0,82 0,90 1,60 0,18 1,77 448,64
4,0 8 1,54 2,26 0,87 0,96 1,78 0,15 1,93 512,73
4,5 - 1,33 2,47 0,92 1,01 1,94 0,13 2,07 576,82
5,0 9 1,13 2,67 0,95 1,05 2,10 0,11 2,21 640,91
25 1,5 3 3,80 1,11 0,61 0,77 0,87 0,38 1,25 162,00
2,0 4 3,46 1,45 0,77 0,96 1,13 0,35 1,48 216,00
2,5 5 3,14 1,77 0,91 1,13 1,39 0,31 1,70 270,00
3,0 6 2,84 2,07 1,02 1,28 1,63 0,28 1,91 324,00
3,5 2 2,54 2,36 1,12 1,40 1,86 0,25 2,11 394,80
4,0 7 2,27 2,64 1,21 1,51 2,07 0,23 2,30 451,20
4,5 8 2,01 2,90 1,28 1,60 2,28 0,20 2,48 507,60
5,0 9 1,77 3,14 1,34 1,67 2,47 0,18 2,64 564,00
6,0 1 1,33 3,58 1,42 1,78 2,81 0,13 2,94 676,80
28 1,5 3 4,91 1,25 0,79 1,10 0,98 0,49 1,47 144,64
2,0 4 4,52 1,63 0,99 1,39 1,28 0,45 1,73 192,86
2,5 2 4,15 2,00 1,17 1,64 1,57 0,42 1,99 241,07
3,0 5 3,80 2,36 1,33 1,87 1,85 0,38 2,23 289,29
3,5 6 3,46 2,69 1,47 2,06 2,11 0,35 2,46 352,50
4,0 7 3,14 3,02 1,59 2,23 2,37 0,31 2,68 402,86
4,5 8 2,84 3,32 1,70 2,38 2,61 0,28 2,89 453,21
5,0 9 2,54 3,61 1,79 2,50 2,84 0,25 3,09 503,57
30 2,0 3 5,31 1,76 1,16 1,73 1,38 0,53 1,91 180,00
2,5 4 4,91 2,16 1,37 2,06 1,70 0,49 2,19 225,00
3,0 5 4,52 2,54 1,56 2,35 2,00 0,45 2,45 270,00
3,5 2 4,15 2,91 1,73 2,60 2,29 0,42 2,70 329,00
4,0 6 3,80 3,27 1,88 2,83 2,56 0,38 2,94 376,00
4,5 7 3,46 3,60 2,01 3,02 2,83 0,35 3,18 423,00
5,0 8 3,14 3,93 2,13 3,19 3,08 0,31 3,40 470,00
5,5 - 2,84 4,23 2,22 3,34 3,32 0,28 3,61 517,00
6,0 9 2,54 4,52 2,31 3,46 3,55 0,25 3,81 564,00
7,0 1 2,01 5,06 2,44 3,65 3,97 0,20 4,17 658,00
35 2,0 3 7,55 2,07 1,62 2,83 1,63 0,75 2,38 161,14
2,5 2 7,07 2,55 1,94 3,39 2,00 0,71 2,71 201,43
3,0 4 6,61 3,02 2,23 3,89 2,37 0,66 3,03 241,71
3,5 5 6,16 3,46 2,49 4,35 2,72 0,62 3,33 282,00
4,0 6 5,73 3,90 2,72 4,76 3,06 0,57 3,63 322,29
4,5 7 5,31 4,31 2,93 5,12 3,38 0,53 3,92 362,57
5,0 8 4,91 4,71 3,11 5,45 3,70 0,49 4,19 402,86
5,5 - 4,52 5,10 3,28 5,74 4,00 0,45 4,45 443,14
6,0 - 4,15 5,47 3,42 5,99 4,29 0,42 4,71 483,43
7,0 9 3,46 6,16 3,66 6,41 4,83 0,35 5,18 564,00
8,0 1 2,84 6,79 3,84 6,73 5,33 0,28 5,61 644,57
Edition: 2003-08
H 170
Page 5
DA WD Wall. F FR W JA GR GW GS PSTAT
thick. St35/NBK
mm mm code cm 2 cm 2 cm 3 cm 4 kg/m kg/m kg/m bareff
38 2,5 3 8,55 2,79 2,32 4,41 2,19 0,86 3,04 185,53
3,0 4 8,04 3,30 2,68 5,09 2,59 0,80 3,39 222,63
3,5 - 7,55 3,79 3,00 5,70 2,98 0,75 3,73 259,74
4,0 5 7,07 4,27 3,29 6,26 3,35 0,71 4,06 296,84
4,5 2 6,61 4,74 3,56 6,76 3,72 0,66 4,38 333,95
5,0 6 6,16 5,18 3,80 7,22 4,07 0,62 4,68 371,05
5,5 7 5,73 5,62 4,01 7,63 4,41 0,57 4,98 408,16
6,0 8 5,31 6,03 4,21 7,99 4,74 0,53 5,27 445,26
7,0 1 4,52 6,82 4,53 8,61 5,35 0,45 5,80 519,47
8,0 9 3,80 7,54 4,78 9,09 5,92 0,38 6,30 593,68
42 2,0 3 11,34 2,51 2,40 5,04 1,97 1,13 3,11 134,29
2,5 2 10,75 3,10 2,89 6,07 2,44 1,08 3,51 167,86
3,0 4 10,18 3,68 3,35 7,03 2,89 1,02 3,90 201,43
3,5 - 9,62 4,23 3,77 7,91 3,32 0,96 4,29 235,00
4,0 5 9,08 4,78 4,15 8,71 3,75 0,91 4,66 268,57
4,5 - 8,55 5,30 4,50 9,45 4,16 0,86 5,02 302,14
5,0 6 8,04 5,81 4,82 10,13 4,56 0,80 5,37 335,71
5,5 - 7,55 6,31 5,11 10,74 4,95 0,75 5,71 369,29
6,0 7 7,07 6,79 5,38 11,30 5,33 0,71 6,03 402,86
7,0 8 6,16 7,70 5,84 12,26 6,04 0,62 6,66 470,00
8,0 9 5,31 8,55 6,21 13,03 6,71 0,53 7,24 573,14
50 3,0 3 15,21 4,53 4,91 12,28 3,48 1,52 5,00 169,20
3,5 - 14,52 5,11 5,56 13,90 4,01 1,45 5,47 197,40
4,0 4 13,85 5,78 6,16 15,41 4,54 1,39 5,92 255,60
4,5 - 13,20 6,43 6,72 16,81 5,05 1,32 6,37 253,80
5,0 5 12,57 7,07 7,25 18,11 5,55 1,26 6,81 282,00
5,5 - 11,95 7,69 7,73 19,32 6,04 1,19 7,23 310,20
6,0 6 11,34 8,29 8,18 20,44 6,51 1,13 7,64 338,40
7,0 7 10,18 9,46 8,97 22,43 7,42 1,02 8,44 394,80
8,0 8 9,08 10,56 9,65 24,12 8,29 0,91 9,19 451,20
9,0 - 8,04 11,59 10,21 25,53 9,10 0,80 9,90 507,60
10,0 9 7,07 12,57 10,68 26,70 9,86 0,71 10,57 564,00
60 3,0 3 22,90 5,37 7,29 21,88 4,22 2,29 6,51 141,00
3,5 2 22,06 6,21 8,29 24,88 4,88 2,21 7,08 164,50
4,0 4 21,24 7,04 9,24 27,73 5,52 2,12 7,65 188,00
4,5 - 20,43 7,85 10,14 30,41 6,16 2,04 8,20 211,50
5,0 5 19,63 8,64 10,98 32,94 6,78 1,96 8,75 235,00
5,5 - 18,86 9,42 11,77 35,32 7,39 1,89 9,28 258,50
6,0 6 18,10 10,18 12,52 37,56 7,99 1,81 9,80 282,00
7,0 - 16,62 11,66 13,88 41,64 9,15 1,66 10,81 329,00
8,0 7 15,21 13,07 15,07 45,22 10,26 1,52 11,78 376,00
9,0 8 13,85 14,42 16,11 48,34 11,32 1,39 12,71 423,00
10,0 9 12,57 15,71 17,02 51,05 12,33 1,26 13,59 470,00
75 3,0 3 37,39 6,79 11,75 44,05 5,33 3,74 9,07 112,80
3,5 - 36,32 7,86 13,43 50,36 6,17 3,63 9,80 131,60
4,0 4 35,26 8,92 15,04 56,40 7,00 3,53 10,53 150,40
4,5 - 34,21 9,97 16,58 62,17 7,82 3,42 11,25 169,20
5,0 5 33,18 11,00 18,05 67,69 8,63 3,32 11,95 188,00
5,5 - 32,17 12,01 19,46 72,96 9,43 3,22 12,64 206,80
6,0 6 31,17 13,01 20,80 77,99 10,21 3,12 13,33 225,60
7,0 7 29,22 14,95 23,29 87,35 11,74 2,92 14,66 263,20
8,0 8 27,34 16,84 25,56 95,83 13,22 2,73 15,95 300,80
9,0 - 25,52 18,66 27,60 103,50 14,65 2,55 17,20 338,40
10,0 9 23,76 20,42 29,44 110,40 16,03 2,38 18,41 376,00
Edition: 2003-08
H 170
Page 6
DA WD Wall. F FR W JA GR GW GS PSTAT
thick. St35/NBK
mm mm code cm 2 cm 2 cm 3 cm 4 kg/m kg/m kg/m bareff
90 3,0 2 55,42 8,20 17,16 77,67 6,44 5,54 11,98 94,00
3,5 3 54,11 9,51 19,80 89,10 7,47 5,41 12,88 109,67
4,0 4 52,81 10,81 22,25 100,13 8,48 5,28 13,76 125,33
4,5 - 51,53 12,09 24,61 110,76 9,49 5,15 14,64 141,00
5,0 5 50,27 13,35 26,89 121,00 10,48 5,03 15,51 156,67
5,5 - 49,02 14,60 29,08 130,87 11,46 4,90 16,36 172,33
6,0 6 47,78 15,83 31,19 140,37 12,43 4,78 17,21 188,00
7,0 - 45,36 18,25 35,18 158,30 14,33 4,54 18,86 219,33
8,0 7 43,01 20,61 38,86 174,87 16,18 4,30 20,48 250,67
9,0 8 40,72 22,90 42,25 190,15 17,98 4,07 22,05 282,00
10,0 9 38,48 25,13 45,38 204,20 19,73 3,85 23,58 313,33
115 3,0 2 93,31 10,56 28,81 165,63 8,29 9,33 17,62 73,57
3,5 3 91,61 12,26 33,17 190,71 9,62 9,16 18,79 85,83
4,0 4 89,92 13,95 37,41 215,11 10,95 8,99 19,94 98,09
4,5 - 88,25 15,62 41,53 238,82 12,26 8,82 21,09 110,35
5,0 5 86,59 17,28 45,54 261,88 13,56 8,66 22,22 122,61
5,5 - 84,95 18,92 49,44 284,29 14,85 8,49 23,35 134,87
6,0 6 83,32 20,55 53,23 306,06 16,13 8,33 24,46 147,13
7,0 7 80,12 23,75 60,48 347,74 18,64 8,01 26,66 171,65
8,0 8 76,98 26,89 67,31 387,01 21,11 7,70 28,81 196,17
9,0 - 73,90 29,97 73,73 423,97 23,53 7,39 30,92 220,70
10,0 9 70,88 32,99 79,78 458,72 25,89 7,09 32,98 245,22
140 3,5 2 138,93 15,01 49,97 349,79 11,78 13,89 25,67 70,50
4,0 3 136,85 17,09 56,50 395,47 13,42 13,68 27,10 80,57
4,5 4 134,78 19,16 62,87 440,12 15,04 13,48 28,52 90,64
5,0 5 132,73 21,21 69,11 483,76 16,65 13,27 29,92 100,71
5,5 - 130,70 23,24 75,20 526,40 18,24 13,07 31,31 110,79
6,0 6 128,68 25,26 81,15 568,06 19,83 12,87 32,70 120,86
7,0 7 124,69 29,25 92,64 648,51 22,96 12,47 35,43 141,00
8,0 8 120,76 33,18 103,60 725,21 26,04 12,08 38,12 161,14
9,0 - 116,90 37,04 114,04 798,29 29,08 11,69 40,77 181,29
10,0 9 113,10 40,84 123,98 867,86 32,06 11,31 43,37 201,43
165 3,5 2 196,07 17,76 70,21 597,23 13,94 19,61 33,55 59,82
4,0 3 193,59 20,23 79,51 655,94 15,88 19,36 35,24 68,36
4,5 4 191,13 22,69 88,63 731,20 17,81 19,11 36,93 76,91
5,0 5 188,69 25,13 97,58 805,03 19,73 18,87 38,60 85,45
5,5 - 186,27 27,56 106,36 877,45 21,63 18,63 40,26 94,00
6,0 6 183,85 29,97 114,97 948,46 23,53 18,39 41,91 102,55
7,0 - 179,08 34,75 131,68 1086,38 27,28 17,91 45,18 119,64
8,0 7 174,34 39,46 147,75 1218,92 30,97 17,44 48,41 136,73
9,0 8 169,72 44,11 163,18 1346,23 34,62 16,97 51,60 153,82
10,0 9 165,13 48,69 177,99 1468,45 38,23 16,51 54,74 170,91
220 3,5 2 356,33 23,81 126,83 1395,13 18,69 35,63 54,32 44,86
4,0 3 352,99 27,14 143,96 1583,54 21,31 35,30 56,61 51,27
4,5 4 349,67 30,47 160,85 1769,31 23,92 34,97 58,88 57,68
5,0 5 346,36 33,77 177,50 1952,45 26,51 34,64 61,15 64,09
5,5 - 343,07 37,06 193,91 2132,99 29,09 34,31 63,40 70,50
6,0 6 339,79 40,34 210,09 2310,97 31,67 33,98 65,64 76,91
7,0 7 333,29 46,84 241,75 2659,29 36,77 33,33 70,10 89,73
8,0 8 326,85 53,28 272,51 2997,61 41,38 32,69 74,51 102,55
9,0 - 320,47 59,66 302,38 3326,13 46,83 32,05 78,88 115,36
10,0 9 314,16 65,97 331,37 3645,03 51,79 31,42 83,21 128,18
Edition: 2003-08
Standard
Hydraulic Hose
for tubes acc. to DIN H 183
Page 1 of 18
Example of a) Designation of a hydraulic hose, type 2TE for PN16, resistant against synthetic hydraulic oil,
Designation: for tube outside diameter 22 mm, yard ware without end connections, with certificate 2.2,
material: rubber with reinforcement
Part number
18329500W 22 HYDRAULIC HOSE(IN M) 2TE RUBBER
PN16 H183/DIN20021 SYNTHETIC CERT:2.2
Example of b) Designation of a hose assembly, type 4SP with crimped fittings form P and O-ring (NBR)
Designation: both ends, PN400, resistant against mineralic hydraulic oil, for tube outside diameter 16 mm,
fixed length 1,6 m, with certificate 2.2, material: hose: rubber with reinforcement (braided) /
fitting: steel nickel plated / O-ring: NBR
Part number
18B6ZPSLW 16 * 1,60 m HOSE ASSY. 4SP-PP/PN400 RUBBER/ST.NI-PL./NBR
H183/DIN20066 MINERALIC CERT:2.2
Page 2
Footnotes
3) Code for hose type : Type M (formerly H2) is not covered by DIN.
Type 1TE only for expiring projects..
7) All diameters shown in computer - printouts refer to the outside diameter of the appropriate
tube.
10) Fire proof coatings are fixed with the hose on both ends (crimped connection).
Maximum permanent temperature 220°C.
11) For yard ware only material code 91,94,95,99 shall be used.
Edition: 2005-12
H 183
Page 3
Material table:
Connecting
fitting
Application Material Hose material: synthetic rubber
Hose type Body
for code
+ O-Ring
Inliner Cover Coating Insert Nut
Hydraulic oil 91 --
mineral
NBR
or Rubber: CR
water glycol 94 Glass fibre Textile
or Manu-
Yard ware or -- --
facturers
95 -- steel
Hydraulic oil option
FPM
synthetic
99 Glass fibre
Edition: 2005-12
H 183
Page 4
Instead of type 1SN or 2SN type 1ST or 2ST may be used, however
ST - hoses have larger outside diameters.
*) In this table the max. allowable dynamic working pressure have been considered for each hose type.
Type 1TE - ONLY FOR STATIC PRESSURE and expiring projects.
Common requirements
- The selection of hoses due to table above serves additional safety beyond DIN20066.
- Suitable for permanent temperatures of -40°C to +100°C (without fire proof coating),
max. temperatures (short time): 125°C
- Sealing cone of hose fittings : for stud 24° acc. to DIN 3901 and DIN 3902
Edition: 2005-12
H 183
Page 5
s1
d2
d1
r
Internal layer Outside layer
Reinforcement
Dimensions in mm
Allowable
Tube Hose d1 d2 Minimum working Test Burst. Weight
outside size allow- allow- s1 bending pressure (gage) press. press. kg / m
diam. able able radius dynam static bar e bar e
.
7) DN toleran. toleran. r min. bar bar min.
6 5 +) 4,8 ± 0,4 10,8 3,0 35 - 25 38 65 0,10
8 6 6,4 12,4 ± 0,8 3,0 45 - 25 38 65 0,12
10 8 7,9 ± 0,5 13,9 3,0 65 - 20 30 50 0,14
12 10 9,5 15,5 3,0 75 - 20 30 50 0,17
15 12 12,7 ± 0,6 18,7 3,0 90 - 16 24 40 0,20
18 16 15,9 22,9 ± 1,0 3,5 115 - 16 24 40 0,35
(22) (20) *) 19 ± 0,8 26 3,5 135 - 12 18 32 0,40
(28) (25) *) 25,4 33,4 4,0 165 - 12 18 32 0,59
Edition: 2005-12
H 183
Page 6
r
Internal layer Outside layer
Reinforcement
Dimensions in mm
Allow. working
Tube Hose d1 d2 Minimum pressure (gage) Test Burst. Weight
outside size allow- allow- s1 bending negat. press. press. kg /m
diam. able able radius dynam overpr. bar e bar e
.
7) DN toleran. toleran. r min. bar bar min.
6 5 +) 4,8 ± 0,4 11,8 3,5 35 80 195 320 0,15
8 6 6,4 13,4 ± 0,8 3,5 40 75 - 0,6 180 300 0,16
10 8 7,9 ± 0,5 14,9 3,5 50 68 165 270 0,19
12 10 9,5 16,5 3,5 60 63 150 250 0,2
15 12 12,7 ± 0,6 19,7 3,5 70 58 140 230 0,27
18 16 15,9 23,9 ± 1,0 4 90 50 - 120 200 0,37
22 20 19 ± 0,8 27 4 110 45 110 180 0,42
28 25 25,4 34,4 ± 1,5 4,5 150 40 96 160 0,6
Edition: 2005-12
H 183
Page 7
s1
d2
d1
r
Outside layer
Internal layer
Reinforcement
Dimensions in mm
Allow. working
Tube Hose d1 d2 Minimum pressure (gage) Test Burst. Weight
outside size allow- allow- s1 bending negat. press. press. kg /m
diam. able able radius dynam overpr. bar e bar e
.
7) DN toleran. toleran. r min. bar bar min.
6 5 +) 4,8 ± 0,4 12,8 4 40 160 385 640 0,16
8 6 6,4 14,4 ± 0,8 4 45 145 345 580 0,19
10 8 7,9 ± 0,5 16,9 4,5 55 130 ± 0,8 315 520 0,24
12 10 9,5 18,5 4,5 70 110 265 440 0,3
15 12 12,7 ± 0,6 21,7 4,5 85 93 225 370 0,35
18 16 15,9 25,9 ± 1,0 5 105 80 195 320 0,46
22 20 19 ± 0,8 29 5 130 70 - 0,6 165 280 0,58
28 25 25,4 35,9 ± 1,5 5,25 150 55 130 220 0,70
35 32 31,8 42,3 5,25 190 45 110 180 0,83
42 40 38,1 ±1,0 49,6 5,75 240 40 96 160 1,15
- *) 50 50,8 62,3 ± 2,0 5,75 300 33 - 78 130 1,43
- *) 60 60 ± 1,2 72 6 400 25 60 100 1,71
- *) 80 80 94 ± 2,5 7 500 18 42 70 2,65
- *) 100 100 ±1,4 116 8 600 10 24 40 4,24
*) For tube outside diameter > 42 use hose sizes for material-take-off-inputs e.g. 50 or 60.
Edition: 2005-12
H 183
Page 8
SW 1 SW 1
d7
d7
d5
d5
d4
d4
l4 l4
O-Ring O-Ring
L **)
Dimensions in mm
**)
Tube Hose Nom. Weight
outside size d7 d5 d4 l4 SW1 press. kg / piece
diam. PN
7) DN min. max. max. bar L = 1,0 m
6 5 +) M12x1,5 2,8 21 77 17
8 6 M14x1,5 3,6 22 81 17
10 8 M16x1,5 5,5 25 84 19 250
12 10 M18x1,5 6,2 29 86 22
15 12 M22x1,5 9 32,5 88 27
18 16 M26x1,5 12 35 99 32 160
22 20 M30x2 15 40 109 36
28 25 M36x2 19,5 50 118 41
35 32 *) M45x2 25,4 58 141 55 100
42 40 *) M52x2 31 70 151 60
**) Finished hose lengths see position 7 and 8 of part number and footnote 4) 5) on page 2.
Part numbers for other combinations of hose types and hose fittings see VAI-Std. 9+SPHY.
Edition: 2005-12
H 183
Page 9
s1
d2
d1
r
Internal layer Outside layer
Wire mesh-insert
Dimensions in mm
Allow. working
Tube Hose d1 d2 Minimum pressure (gage) Test Burst. Weight
outside size allow- allow- s1 bending negat. press. press. kg /m
diam. able able radius dynam overpr. bar e bar e
.
7) DN toleran. toleran. r min. bar bar min.
8 5 +) 4,8 12,7 3,95 90 250 600 1000 0,21
10 6 6,4 + 0,6 15,9 4,75 100 225 540 900 0,32
12 8 7,9 - 0,2 17,5 4,8 115 215 510 850 0,35
14 10 9,5 19,8 ± 0,8 5,15 130 180 - 0,8 435 720 0,39
16 12 12,7 + 0,8 23 5,15 180 160 385 640 0,52
20 16 15,9 - 0,4 26,2 5,15 200 130 315 520 0,71
25 20 19 30,2 5,6 240 105 255 420 0,88
30 25 25,4 + 1,0 38,1 ± 1,0 6,35 300 88 210 350 1,08
- 0,4 - 0,6
38 32 31,8 + 1,2 46 7,1 420 63 150 250 1,65
50 40 38,1 - 0,4 52,4 ± 1,6 7,15 500 50 120 200 2,03
60 50 50,8 66,7 7,95 630 40 - 96 160 2,39
Edition: 2005-12
H 183
Page 10
Intermediate layer
d1 s1
d2
r
Internal layer Outside layer
2 Wire mesh-inserts
Dimensions in mm
Allow. working
Tube Hose d1 d2 Minimum pressure (gage) Test Burst. Weight
outside size allow- allow- s1 bending negat. press. press. kg /m
diam. able able radius dynam overpr. bar e bar e
.
7) DN toleran. toleran. r min. bar bar min.
8 5 +) 4,8 15,9 5,55 90 415 990 1650 0,37
10 6 6,4 ±0,6 17,5 5,55 100 400 960 1600 0,45
12 8 7,9 -0,2 19,1 5,6 115 350 -0,95 840 1400 0,54
14 10 9,5 21,4 ±0,8 5,95 130 330 795 1320 0,61
16 12 12,7 + 0,8 24,6 5,95 180 275 660 1100 0,75
20 16 15,9 - 0,4 27,8 5,95 200 250 600 1000 0,89
25 20 19 31,8 6,4 240 215 510 850 1,1
30 25 25,4 + 1,0 39,7 ±1,2 7,15 300 165 -0,8 390 650 1,35
- 0,4
38 32 31,8 + 1,2 50,8 9,50 420 125 300 500 2,35
50 40 38,1 - 0,4 57,2 ±1,6 9,55 500 90 220 360 2,72
60 50 50,8 69,8 9,50 630 80 195 320 3,42
Edition: 2005-12
H 183
Page 11
r
Internal layer Outside layer
Wire mesh-insert
Dimensions in mm
Allow. working
Tube Hose d1 d2 Minimum pressure (gage) Test Burst. Weight
outside size allow- allow- s1 s2 s3 bending negat. press. press. kg /m
diam. able able radius dynam. overpr. bar e bar e
7) DN toleran. toleran. r min. bar bar min.
8 5 +) 4,8 11,8 3,5 2,35 90 250 600 1000 0,15
10 6 6,4 +0,6 13,4 ± 0,7 3,5 2,35 100 225 540 900 0,22
12 8 7,9 -0,2 15 3,55 2,4 max. 115 215 510 850 0,27
14 10 9,5 17,4 3,95 2,8 1,5 130 180 -0,8 435 720 0,34
16 12 12,7 +0,8 20,6 3,95 2,8 180 160 385 640 0,43
20 16 15,9 -0,4 23,7 ± 0,8 3,9 2,75 min. 200 130 315 520 0,51
25 20 19 27,7 4,35 3,2 0,8 240 105 255 520 0,60
30 25 25,4 +1,0 35,6 ± 1,0 5,1 3,95 300 88 210 350 0,76
-0,4
38 32 31,8 43,5 ±1,3 5,85 4,35 £ 2,0 420 63 -0,6 150 250 1,16
> 1,0
50 40 38,1 +1,2 50,6 6,25 4,35 max. 500 50 120 200 1,43
-0,4 ± 1,5 2,5
60 50 50,8 64 6,6 4,7 min. 630 40 - 96 160 1,93
1,5
Edition: 2005-12
H 183
Page 12
Intermediate layer
d1 s1
d2
r
Internal layer Outside layer
2 Wire mesh-inserts
Dimensions in mm
Allow. working
Tube Hose d1 d2 Min. pressure (gage) Test Burst. Weight
outside size allow- allow- s1 s2 s3 bending negat. press. press. kg /m
diam. able able radius dynam. overpr. bar e bar e
7) DN toleran. toleran. r min. bar bar min.
8 5 +) 4,8 13,4 4,3 3,15 90 415 990 1650 0,34
10 6 6,4 +0,6 15 ± 0,7 4,3 3,15 max. 100 400 960 1600 0,42
12 8 7,9 -0,2 16,6 4,35 3,2 1,5 115 350 -0,95 840 1400 0,49
14 10 9,5 19 4,75 3,6 130 330 795 1320 0,58
16 12 12,7 +0,8 22,2 4,75 3,55 min. 180 275 660 1100 0,67
20 16 15,9 -0,4 25,4 4,75 3,55 0,8 200 250 600 1000 0,80
25 20 19 29,3 ± 0,8 5,15 4,0 240 215 510 850 0,92
30 25 25,4 +1,0 38,1 6,35 4,75 max. 300 165 390 650 1,29
-0,4 2,0
38 32 31,8 48,3 ± 1,2 8,25 6,35 min. 420 125 300 500 1,92
1,0 -0,8
50 40 38,1 +1,2 54,6 8,25 6,35 max. 500 90 220 360 2,23
-0,4 ± 1,3 2,5
60 50 50,8 67,3 8,25 6,35 min. 630 80 195 320 2,78
1,3
Edition: 2005-12
H 183
Page 13
SW 1 SW 1
d7
d7
d5
d5
d4
d4
l4 l4
O-Ring O-Ring
L **)
Dimensions in mm
**)
Tube Hose Nom. Weight
outside size d7 d5 d4 l4 SW1 press. kg / piece
diam. PN
7) DN min. max. max. bar L = 0,63 m L = 1,0 m
8 5 +) M16x1,5 2,8 22 77 19
10 6 M18x1,5 3,6 23,5 81 22 630
12 8 M20x1,5 5,5 27 84 24
14 10 M22x1,5 6,2 29 86 27
16 12 M24x1,5 9 32,5 88 30
20 16 M30x2 12 39 99 36 400
25 20 M36x2 15 42 109 41/46
30 25 M42x2 19,5 54 118 50 250
38 32 M52x2 25,4 70 141 60
**) Finished hose lengths see position 7 and 8 of part number and footnote 4) 5) on page 2.
Part numbers for other combinations of hose types and hose fittings see VAI-Std. 9+SPHY.
Edition: 2005-12
H 183
Page 14
3 Intermediate layers
s1
d2
d1
r
Internal layer Outside layer
4 Wire spiral-inserts
Dimensions in mm
Allowable
Tube Hose d1 d2 Minimum working Test Burst. Weight
outside size allow- allow- s1 bending pressure press. press. kg /m
diam. able able radius dynam. bar e bar e
7) DN toleran. toleran. r min. bar *) min.
10 6 6,4 +0,6 17,9 5,75 150 450 1080 1800 0,6
14 10 9,5 -0,2 21,4 5,95 180 445 1070 1780 0,78
16 12 12,7 +0,8 24,6 ±0,8 5,95 230 415 995 1660 0,97
20 16 15,9 -0,4 28,2 6,15 250 350 840 1400 1,12
25 20 19 32,2 6,60 300 350 840 1400 1,56
30 25 25,4 +1,0 39,7 ±1,2 7,15 340 280 670 1120 2,2
-0,4
38 32 31,8 +1,2 50,8 9,50 460 210 500 840 3,4
50 40 38,1 -0,4 57,2 ±1,6 9,55 560 185 445 740 3,8
60 50 50,8 69,8 9,50 660 165 400 660 4,5
Edition: 2005-12
H 183
Page 15
SW 1 SW 1
d7
d7
d5
d5
d4
d4
l4 l4
O-Ring O-Ring
L **)
Dimensions in mm
**)
Tube Hose Nom. Weight
outside size d7 d5 d4 l4 SW1 press. kg / piece
diam. PN
7) DN min. max. max. bar L = 0,63 m L = 1,0 m
10 6 M18x1,5 3,6 23 80 22 630
14 10 M22x1,5 6,2 30 92 27
16 12 M24x1,5 9 35 96 30
20 16 M30x2 12 39 100 36 400
25 20 M36x2 15 45 116 41/46
30 25 M42x2 19,5 56 129 50 250
38 32 M52x2 25,4 73 157 60
**) Finished hose lengths see position 7 and 8 of part number and footnote 4) 5) on page 2.
Part numbers for other combinations of hose types and hose fittings see VAI-Std. 9+SPHY.
Edition: 2005-12
H 183
Page 16
3 Intermediate layers
s1
d2
d1
r
Internal layer Outside layer
4 Wire spiral-inserts
Dimensions in mm
Allowable
Tube Hose d1 d2 Minimum working Test Burst. Weight
outside size allow- allow- s1 bending press. press. press. kg /m
diam. able able radius dynam. bar e bar e
7) DN toleran. toleran. r min. bar min.
25 20 19,0 +0,8 32,2 +0,8 6,60 280 420 1000 1680 1,50
-0,4
30 25 25,4 +1,0 38,7 +1,2 6,65 340 380 910 1520 2,15
-0,4
38 32 31,8 +1,2 45,5 6,85 460 325 780 1300 2,60
50 40 38,1 -0,4 53,5 +1,6 7,70 560 290 700 1160 3,20
60 50 50,8 68,1 8,65 700 250 600 1000 5,00
Edition: 2005-12
H 183
Page 17
SW 1 SW 2 SW2 SW 1
d7
d7
d5
d5
d4
d4
O-Ring l4 l4 O-Ring
L **)
Dimensions in mm
*) **)
Tube Hose Nom. Widths Weight
outside size press. d7 d5 d4 l4 over flats kg / piece
diam. PN
7) DN bar min. max. max. SW1 SW2 L = 0,63 m L = 1,0 m
25 20 400 M36x2 15,0 35,5 87 41 41
30 25 315 M42x2 20,0 44,0 99 50 50
38 32 M52x2 26,5 50,5 113 60 50
**) Finished hose lengths see position 7 and 8 of part number and footnote 4) 5) on page 2.
Part numbers for other combinations of hose types and hose fittings see VAI-Std. 9+SPHY.
Edition: 2005-12
H 183
Page 18
M16 *)
M16 *)
ø18
ø18
d
21 21
L **)
**) Finished hose lengths see position 7 and 8 of part number and footnote 4) 5) on page 2.
Dimensions in mm
Edition: 2005-12
Standard
Butt-Welding Fittings
acc. to ASME B16.9 and ASME B16.28
H 200
Page 1 of 20
Contents
Page
Tolerances 2
Elbows
Partnumbering Code 3
Dimensions:
Partnumbering Code 7
Partnumbering Code 14
Caps
Partnumbering Code 19
Caps (Dimensions) 20
Page 2
Dimension allowances for fittings acc. to ASME B16.9 and ASME B16.28
Q Q
U
U
Q Q
P
Q
Q Q
Q
Q Q
Tolerances in mm
For all fittings
Elbow 90°, 45° Elbow 180°
Outside Connect. Tees and Reducers Caps
Nominal diameter Inside Wall- Crosses Over all Center Back to Alignment
diameter at bevel diameter thickness Center to End Length length to end Face of Ends
DN D s1, s2 A, B, C, M H E C H U
1/2" up to +1,52 ±0,76 ±1,52 ±1,52 ±3,05 ±6,35 ±6,35 ±0,76
2 1/2" -0,76
3" up to ±1,52 ±1,52 *) ±1,52 ±1,52 ±3,05 ±6,35 ±6,35 ±0,76
3 1/2"
4" ±1,52 ±1,52 ±1,52 ±1,52 ±3,05 ±6,35 ±6,35 ±0,76
5" up to +2,29 ±1,52 ±1,52 ±1,52 ±6,35 ±6,35 ±6,35 ±0,76
8" -1,52
10" up to +4,06 ±3,05 ±2,29 ±2,29 ±6,35 ±9,65 ±6,35 ±1,52
18" -3,05
20" up to +6,35 ±4,83 ±2,29 ±2,29 ±6,35 ±9,65 ±6,35 ±1,52
24" -4,83
26" up to +6,35 ±4,83 ±3,05 ±4,83 ±9,65
30" -4,83
32" up to +6,35 ±4,83 ±4,83 ±4,83 ±9,65
48" -4,83
Tolerances in mm
Angularity tolerances Angularity tolerances
Nominal diam. off off Nominal diam. off off
Angle Plan Angle Plan
DN Q P DN Q P
1/2" up to 4" 0,76 1,52 18" up to 24" 3,05 9,65
5" up to 8" 1,52 3,05 26" up to 30" 4,83 9,65
10" up to 12" 2,29 4,83 32" up to 42" 4,83 12,70
14" up to 16" 2,29 6,35 44" up to 48" 4,83 19,05
Edition: 2001-07
Elbows
H 200
acc. to ASME B16.9 and ASME B16.28
Page 3
Example of Designation of a seamless elbow 90°, long radius (L.R.), nominal diameter 6", connecting
Designation: wallthickness s1 = Sched. 40, material: ASTM A234 Gr.WPA, surface finish: metallic
Partnumber
21214A302 6" / 168,3 * 7,11 Seamless Elbow 90° L.R. A234 Gr.WPA
Sched. 40 H200/ASME B16.9
Partnumbering Code
6) Dimension A, B, C, H may also be furnished with 28.4, 11.2, 57.2, 42.9 (mm) (manufacturer's standard).
8) For piping components with end coding H a "certified test report" acc.to ASTM A530 shall be provided.
Edition: 2001-07
H 200
Page 4
s2
D2
A
Welding bevel
for s1 or s2 acc. to ASME B16.9
s1
D1
Dimensions in mm
Outside Center *) 5) Outside Center *) 5)
Nominal diam. diameter to End Weight Nominal diam. diameter to End Weight
at bevel s1 kg/ at bevel s1 kg/
DN1 DN2 D1 D2 A s2 piece DN1 DN2 D1 D2 A s2 piece
1 1/2" 48,3 0,52 8" 219,1 28,9
2" 1 1/4" 60,3 42,2 76,2 0,46 10" 6" 273 168,3 381 23,7
1" 33,4 0,41 5" 141,3 21,8
2" 60,3 1,0 10" 273 45,5
21/2" 1 1/2" 73,0 48,3 95,2 2) 0,85 12" 8" 323,8 219,1 457,2 2) 37,4
11/4" 42,2 0,8 6" 168,3 32,2
2 1/2" 73,0 1,7 12" 323,8 61,9
3" 2" 88,9 60,3 114,3 1,37 14" 10" 355,6 273 533,4 53,4
1 1/2" 48,3 1,22 8" 219,1 45,4
3" 88,9 2,5 14" 355,6 80,5
(31/2") 2 1/2" 101,6 73,0 133,3 2,12 16" 12" 406,4 323,8 609,6 72,6
2" 60,3 1,8 10" 273 64,1
(3 1/2") 101,6 3,43 16" 406,4 103,6
4" 3" 114,3 88,9 152,4 3,0 18" 14" 457,2 355,6 685,8 93,0
2 1/2" 73,0 2,64 12" 323,8 85,0
2" 60,3 2,31 10" 273 76,5
4" 114,3 5,31 18" 457,2 130,0
5" (3 1/2") 141,3 101,6 190,5 4,8 16" 406,4 117,5
3" 88,9 4,4 20" 14" 508 355,6 762 106,8
2 1/2" 73,0 4,0 12" 323,8 98,9
5" 141,3 8,5 10" 273 90,4
6" 4" 168,3 114,3 228,6 7,2 22" 558,8 191,1
(3 1/2") 101,6 6,7 20" 508 175,7
3" 88,9 6,2 24" 18" 609,6 457,2 914,4 161,9
6" 168,3 15,6 16" 406,4 149,4
8" 5" 219,1 141,3 304,8 13,8 14" 355,6 138,8
4" 114,3 12,4 12" 323,8 130,8
*) Connecting wallthickness
Further footnotes see page 3
Edition: 2001-07
H 200
Page 5
H
A
s1 s1 s1
D D D
A A C
Dimensions in mm
5)
Nominal Outside Center to End Elbow 180° Connect. Weight
diameter diameter Elbow Center Back to wall- kg / piece
at bevel 90° 45° to End Face thickness
DN D A B C H s1 90° 45° 180°
1/2" 21,3 38,1 15,7 76,2 47,7 0,07 0,04 0,16
6) 3/4" 26,7 38,1 19,1 76,2 50,8 0,07 0,04 0,16
1" 33,4 38,1 22,3 76,2 55,6 0,15 0,11 0,31
1 1/4" 42,2 47,7 25,4 95,2 69,8 0,26 0,17 0,53
1 1/2" 48,3 57,2 28,4 114,3 82,6 0,37 0,23 0,76
2" 60,3 76,2 35 152,4 106,4 2) 0,67 0,37 1,36
2 1/2" 73,0 95,2 44,4 190,5 131,8 1,33 0,74 2,67
3" 88,9 114,3 50,8 228,6 158,8 2,08 1,1 4,19
(3 1/2") 101,6 133,3 57,1 266,7 184,1 2,92 1,49 5,9
4" 114,3 152,4 63,5 304,8 209,6 3,95 1,95 7,94
5" 141,3 190,5 79,2 381 261,9 6,67 3,31 13,5
6" 168,3 228,6 95,2 457,2 312,7 10,4 5,13 20,9
8" 219,1 304,8 127 609,6 414,3 20,9 10,3 41,9
10" 273 381 158,8 762 517,6 37 18,3 79,4
12" 323,8 457,2 190,5 914,4 619,2 54 27 109,3
14" 355,6 533,4 222,2 1066,8 711,2 69,9 34,7 140,2
16" 406,4 609,6 254 1219,2 812,8 91,2 45,4 183,7
18" 457,2 685,8 285,7 1371,6 914,4 116,1 58,1 233,1
20" 508 762 316,5 1524 1016 143,8 71,7 288,9
22" 558,8 838,8 342,9 1676,4 1117,6 174,6 87,1 349,7
24" 609,6 914,4 381 1828,8 1219,2 207,7 103,9 417,3
26" 660,4 990,6 406,4 - - 244,5 122 -
28" 711,2 1066,8 438,2 - - 308 154 -
30" 762 1143 469,9 - - 326,6 162,4 -
32" 812,8 1219,2 501,7 - - 386 193 -
34" 863,6 1295,4 533,4 - - 420 210 -
36" 914,4 1371,6 565,2 - - 471,7 235 -
38" 965,2 1447,8 599,9 - - 544 272 -
40" 1016 1524 632 - - 590 295 -
42" 1066,8 1600,2 660,4 - - 644,1 320,7 -
44" 1117,6 1676,4 695,4 - - 726 363 -
46" 1168,4 1752,6 726,9 - - 816 408 -
48" 1219,2 1828,8 759 - - 907 454 -
Edition: 2001-07
H 200
Page 6
a
H
A
s1 s1 s1
D D D
A C a
Dimensions in mm
Outside Elbows R = D R = 5D 5)
Nom. diameter 90° 180° 90° Connect. Weight
diam. at bevel Center Center Back Center wall- kg / piece
to End to end to Face to End thickness R=D R = 5D
DN D A C H a s1 90° 180° 90°
1" 33,4 25,4 50,8 41,1 145 0,1 0,21 0,58
1 1/4" 42,2 31,7 63,5 52,3 185 0,17 0,35 1,0
1 1/2" 48,3 38,1 76,2 61,9 215 0,25 0,50 1,34
2" 60,3 50,8 101,6 81 270 0,45 0,90 2,4
2 1/2" 73,0 63,5 127 100 350 2) 0,87 1,78 4,96
3" 88,9 76,2 152,4 120,6 410 1,38 2,78 7,4
(3 1/2") 101,6 88,9 177,8 139,7 - 1,93 3,90 -
4" 114,3 101,6 203,2 158,7 540 2,62 5,26 14,1
5" 141,3 127 254 196,8 660 4,42 8,94 22,7
6" 168,3 152,4 304,8 236,5 780 6,89 13,9 34,6
8" 219,1 203,2 406,4 312,4 1020 13,8 27,9 67
10" 273 254 508 390,6 1300 24,5 49,4 123,4
12" 323,8 304,8 609,2 466,8 1550 36,1 72,6 180,2
14" 355,6 355,6 711,2 533,4 1700 46,3 93,0 217,6
16" 406,4 406,4 812,8 609,6 1940 61,2 122,5 284,9
18" 457,2 457,2 914,4 685,8 2250 77,6 155,1 -
20" 508 508 1016 762 2490 96,2 192,3 465,4
22" 558,8 558,8 1117,6 838,2 2750 117 235 -
24" 609,6 609,6 1219,2 914,4 3000 138,3 277,6 -
Edition: 2001-07
H 200
Tees and Crosses
acc. to ASME B16.9
Page 7
Example of Designation of a seamless tee, equal, nominal diameter 10", connecting wallthickness s1
Designation: and s2 = Sched. 160, material: ASTM A234 Gr.WPB, surface finish: protective coating outside
Partnumber
23164W992 273 * 28,58 / 273 * 28,58 Seamless Tee protective coat. outside A234 Gr.WPB
Sched. 160/160 H200/ASME B16.9
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. - 8. 9.
5) 4) 1) Connecting 7)
Kind of Part Surface finish ASTM - Material Wallthickn. Certificate
Cd. Cd. Cd. Cd. Cd. Cd.
Tee, seamless 231 metallic 1 A234 Gr. WPA 4A 2) 3) ASME 2
equal and reducing outside 3 A234 Gr. WPB 4W * * 8)
Tee, welded 232 bituminated and A234 Gr. WP1 4B ASME H
equal and reducing limed A234 Gr. WP5 4C
Cross 233 protective coating 4 A234 Gr. WP11 4D
equal and reducing inside and outside A234 Gr. WP12 4E
protective coating 5 A234 Gr. WP22 4F
inside A403 Gr. WP304 4G
protective coating 6 A403 Gr. WP304L 4H
outside A403 Gr. WP316 4J
sandblasted 7 A403 Gr. WP316L 4K
inside A403 Gr. WP321 4L
Special finish 9 A420 Gr. WPL3 4N
A420 Gr. WPL6 4P
A403 Gr. WP321H E1
A403 Gr. WP321-WX E2
A403 Gr. S31803 W1
A234 Gr. WP91 W2
2) Wallthickness code for run pipe ü Wallthickness code acc. to VAI-Std. H0011
ý
3) Wallthickness code for branch pipe þ Connecting wallthicknesses acc.to VAI-Std. H100 and piping specifications.
The allowable working pressure of the tee is the same as for the straight seamless pipe with the same
outside diameter, the same connecting wallthickness and comparable material.
8) For piping components with end coding H a "certified test report" acc.to ASTM A530 shall be provided.
Edition: 2001-07
H 200
Page 8
D2 D2
s2
s2
s1
s1
M
M
D1
D1
M
C C
C C
Dimensions in mm
Outside 6)
Nominal diameter diameter Center to end Connect. Weight
at bevel wall- kg / piece
Run pipe Branch thickness
DN1 DN2 D1 / D2 C M s1 / s2 Tee Cross
1/2" 21,3 0,11
1/2" 3/8" 17,3 25,4 25,4 0,10
1/4" 13,7 0,10
3/4" 26,7 0,17
3/4" 1/2" 21,3 28,4 28,4 2) 0,15
3/8" 17,3 3) 0,15
1" 33,4 0,34 0,29
1" 3/4" 26,7 38,1 38,1 0,29
1/2" 21,3 0,29
1 1/4" 42,2 0,61 0,6
1 1/4" 1" 33,4 47,7 47,7 0,53
3/4" 26,7 0,50
1/2" 21,3 0,50
1 1/2" 48,3 0,92 0,87
1 1/4" 42,2 0,80
1 1/2" 1" 33,4 57,1 57,1 0,76
3/4" 26,7 0,73
1/2" 21,3 0,73
2" 60,3 63,5 1,34 1,3
1 1/2" 48,3 60,4 1,21
2" 1 1/4" 42,2 63,5 57,1 1,16
1" 33,4 50,8 1,12
3/4" 26,7 44,4 1,09
2 1/2" 73,0 76,2 2,36 2,22
2" 60,3 69,8 2,08
2 1/2" 1 1/2" 48,3 76,2 66,5 2,04
1 1/4" 42,2 63,5 1,99
1" 33,4 57,1 1,96
3" 88,9 85,8 3,37 3,34
2 1/2" 73,0 82,5 3,09
3" 2" 60,3 85,5 76,2 2,95
1 1/2" 48,3 73,1 2,92
1 1/4" 42,2 69,8 2,88
Edition: 2001-07
H 200
Page 9
Tees and Crosses, equal and reducing acc. to ASME B16.9, cont´d
Dimensions in mm
Outside 6)
Nominal diameter diameter Center to End Connect. Weight
at bevel wall- kg / piece
Run pipe Branch thickness
DN1 DN2 D1 / D2 C M s1 / s2 Tee Cross
(3 1/2") 101,6 94 4,47 4,12
3" 88,9 91,9 4,09
(3 1/2") 2 1/2" 73,0 94 88,9 3,99
2" 60,3 82,5 3,85
1 1/2" 48,3 79,2 2) 3,85
4" 114,3 104,6 3) 5,72 5,33
(3 1/2") 101,6 101,6 5,26
4" 3" 88,9 104,6 98,5 5,17
2 1/2" 73,0 95,2 5,13
2" 60,3 88,9 4,99
1 1/2" 48,3 85,8 4,94
5" 141,3 123,9 8,98 9,5
4" 114,3 116,8 8,21
5" (3 1/2") 101,6 123,9 114,3 8,07
3" 88,9 111,2 7,98
2 1/2" 73,0 107,9 7,89
2" 60,3 104,6 7,8
6" 168,3 142,7 13,3 11,11
5" 141,3 136,6 12,1
6" 4" 114,3 142,7 130 11,9
(3 1/2") 101,6 127 11,8
3" 88,9 123,9 11,7
2 1/2" 73,0 120,6 11,7
8" 219,1 177,8 24,4 21,12
6" 168,3 168,1 22,1
8" 5" 141,3 177,8 162 21,8
4" 114,3 155,4 21,7
(3 1/2") 101,6 152,4 21,6
10" 273 215,9 41,4 35,73
8" 219,1 203,2 37,6
10" 6" 168,3 215,9 193,5 37,1
5" 141,3 190,5 36,9
4" 114,3 184,1 36,8
12" 323,8 254 59,9 62,60
10" 273 241,3 54,9
12" 8" 219,1 254 228,6 53,5
6" 168,3 218,9 53,1
5" 141,3 215,9 53,1
14" 355,6 279,4 72,1
12" 323,8 269,7 66,7
14" 10" 273 279,4 257 65,3
8" 219,1 247,6 64,9
6" 168,3 238,2 64,4
16" 406,4 304,8 99,3
14" 355,6 304,8 95,3
16" 12" 323,8 304,8 295,1 92,5
10" 273 282,4 88,5
8" 219,1 273 83,9
6" 168,3 263,6 79,8
Edition: 2001-07
H 200
Page 10
Tees and Crosses, equal and reducing acc. to ASME B16.9, cont´d
Welding bevel for s1 and s2 acc. to ASME B16.9
D2 D2
s2
s2
s1
s1
M
M
D1
D1
M
C C
C C
Dimensions in mm
Outside 6)
Nominal diameter diameter Center to End Connect. Weight
at bevel wall- kg / piece
Run pipe Branch thickness
DN1 DN2 D1 / D2 C M s1 / s2 Tee Cross
18" 457,2 342,9 127,9
16" 406,4 330,2 122
18" 14" 355,6 342,9 330,2 118,8
12" 323,8 320,5 115,2
10" 273 307,8 2) 110,7
8" 219,1 298,4 3) 104,8
20" 508 381 160,6
18" 457,2 368,3 159,1
16" 406,4 355,6 149,2
20" 14" 355,6 381 355,6 143,3
12" 323,8 345,9 139,7
10" 273 333,2 133,8
8" 219,1 323,8 127,9
22" 558,8 419,1 198,2
20" 508 406,4 191,9
18" 457,2 393,7 185,1
22" 16" 406,4 419,1 381 178,7
14" 355,6 381 172,4
12" 323,8 371,3 171
10" 273 358,6
24" 609,6 431,8 223,6
22" 558,8 431,8
20" 508 431,8 205,5
24" 18" 457,2 431,8 419,1 205,5
16" 406,4 406,4 196,4
14" 355,6 406,4 190,1
12" 323,8 396,7 185,5
10" 273 384,0 178,7
26" 660,4 495,3 287,6
24" 609,6 482,6 279,4
22" 558,8 469,9 271,2
26" 20" 508 495,3 457,2 263,5
18" 457,2 444,5 254,9
16" 406,4 431,8 246,8
14" 355,6 431,8 239
12" 323,8 422,1 234,1
Footnotes see page 7
Edition: 2001-07
H 200
Page 11
Tees and Crosses, equal and reducing acc. to ASME B16.9, cont´d
Dimensions in mm
Outside 6)
Nominal diameter diameter Center to End Connect. Weight
at bevel wall- kg / piece
Run pipe Branch thickness
DN1 DN2 D1 / D2 C M s1 / s2 Tee Cross
28" 711,2 520,7 337
26" 660,4 520,7 325,2
24" 609,6 508 319,8
22" 558,8 495,3 2) 310,7
28" 20" 508 520,7 482,6 3) 301,6
18" 457,2 469,9 292,1
16" 406,4 457,2 283
14" 355,6 457,2 274
12" 323,8 447,5
30" 762 558,8 387,8
28" 711,2 546,1 378,3
26" 660,4 546,1 370,6
24" 609,6 533,4 360,6
22" 558,8 520,7 350,2
30" 20" 508 558,8 508 339,7
18" 457,2 495,3 329,8
16" 406,4 482,6 319,3
14" 355,6 482,6 308,9
12" 323,8 472,9
10" 273 462,3
32" 812,8 596,9 451
30" 762 584,2 441,4
28" 711,2 571,5 429,1
26" 660,4 571,5 420,5
32" 24" 609,6 596,9 558,8 410
22" 558,8 546,1
20" 508 533,4 406
18" 457,2 520,7 390
16" 406,4 508 381
14" 355,6 508
34" 863,6 635 515,3
32" 812,8 622,3 503,9
30" 762 609,6 492,1
28" 711,2 596,9 480,4
34" 26" 660,4 635 596,9 471,3
24" 609,6 584,2 459,5
22" 558,8 571,5 447,2
20" 508 558,8 435,4
18" 457,2 546,1 423,2
16" 406,4 533,4 411,4
36" 914,4 673,1 586,9
34" 863,6 660,4 573,3
32" 812,8 647,4 561,1
30" 762 635 547,5
28" 711,2 622,3 535,7
36" 26" 660,4 673,1 622,3 525,3
24" 609,6 609,6 512,1
22" 558,8 596,9 499
20" 508 584,2 486,3
18" 457,2 571,5 473,6
16" 406,4 558,8 460,4
Footnotes see page 7
Edition: 2001-07
H 200
Page 12
Tees and Crosses, equal and reducing acc. to ASME B16.9, cont´d
Welding bevel for s1 and s2 acc. to ASME B16.9
D2 D2
s2
s2
s1
s1
M
M
D1
D1
M
C C
C C
Dimensions in mm
Outside 6)
Nominal diameter diameter Center to End Connect. Weight
at bevel wall- kg / piece
Run pipe Branch thickness
DN1 DN2 D1 / D2 C M s1 / s2 Tee Cross
38" 965,2 711,2 638
36" 914,4 711,2 638
34" 863,6 698,5 2) 627
32" 812,8 685,8 3) 615
30" 762 673,1 604
38" 28" 711,2 711,2 647,7 581
26" 660,4 647,7 581
24" 609,6 635 570
22" 558,8 622,3 558
20" 508 609,6 547
18" 457,2 596,9 535
40" 1016 749,3 690
38" 965,2 749,3 690
36" 914,4 736,6 690
34" 863,6 723,9 690
32" 812,8 711,2 690
40" 30" 762 749,3 698,5 643
28" 711,2 673,1 620
26" 660,4 673,1 620
24" 609,6 660,4 608
22" 558,8 647,7 596
20" 508 635 585
18" 457,2 622,3 573
42" 1066,8 711,2 795
40" 1016 711,2 755
38" 965,2 711,2 755
36" 914,4 711,2 755
34" 863,6 711,2 755
32" 812,8 711,2 755
42" 30" 762 762 711,2 742
28" 711,2 698,5 729
26" 660,4 698,5 729
24" 609,6 660,4 689
22" 558,8 660,4 689
20" 508 660,4 689
18" 457,2 647,7 676
16" 406,4 635 663
Footnotes see page 7
Edition: 2001-07
H 200
Page 13
Tees and Crosses, equal and reducing acc. to ASME B16.9, cont´d
Dimensions in mm
Outside 6)
Nominal diameter diameter Center to End Connect. Weight
at bevel wall- kg / piece
Run pipe Branch thickness
DN1 DN2 D1 / D2 C M s1 / s2 Tee Cross
44" 1117,8 762 899
42" 1066,8 762 843
40" 1016 749,3 829
38" 965,2 736,6 815
36" 914,4 723,9 2) 801
34" 863,6 723,9 3) 801
44" 32" 812,8 812,8 711,2 787
30" 762 711,2 787
28" 711,2 698,5 773
26" 660,4 698,5 773
24" 609,6 698,5 773
22" 558,8 685,8 759
20" 508 685,8 759
46" 1168,4 800,1 1007
44" 1117,8 800,1 947
42" 1066,8 787,4 932
40" 1016 774,7 917
38" 965,2 762 902
36" 914,4 762 902
46" 34" 863,6 850,9 749,3 887
32" 812,8 749,3 887
30" 762 736,6 872
28" 711,2 736,6 872
26" 660,4 736,6 872
24" 609,6 723,9 857
22" 558,8 723,9 857
48" 1219,2 838,2 1113
46" 1168,4 838,2 1049
44" 1117,8 838,2 1049
42" 1066,8 812,8 1018
40" 1016 812,8 1018
38" 965,2 812,8 1018
48" 36" 914,4 889 787,4 986
34" 863,6 787,4 986
32" 812,8 787,4 986
30" 762 762 954
28" 711,2 762 954
26" 660,4 762 954
24" 609,6 736,6 922
22" 558,8 736,6 922
Edition: 2001-07
H 200
Page
Leerseite
Edition: 2001-07
H 200
Concentric and Ecc. Reducers
acc. to ASME B16.9
Page 14
Example of Designation of a welded concentric reducer, DN1 = 10" and DN2 = 6", connecting wallthickness
Designation: s1 = XS and s2 = XS, material: ASTM A234 Gr.WP5, surface finish: metallic
Partnumber
24314CFF2 273 * 12,7 / 168,3 * 10,97 Reducer concentric welded A234 Gr.WP5
Sched. XS/XS H200/ASME B16.9
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. - 8. 9.
5) 4) 1) Connecting 7)
Kind of Part Surface finish ASTM - Material Wallthickn. Certificate
Cd. Cd. Cd. Cd. Cd. Cd.
Seamless Concentric 241 metallic 1 A234 Gr. WPA 4A 2) 3) ASME 2
Reducer outside 3 A234 Gr. WPB 4W * * 8)
Seamless Eccentric 242 bituminated and A234 Gr. WP1 4B ASME H
Reducer limed A234 Gr. WP5 4C
Welded Concentric 243 protective coating 4 A234 Gr. WP11 4D
Reducer inside and outside A234 Gr. WP12 4E
Welded Eccentric 244 protective coating 5 A234 Gr. WP22 4F
Reducer inside A403 Gr. WP304 4G
protective coating 6 A403 Gr. WP304L 4H
outside A403 Gr. WP316 4J
sandblasted 7 A403 Gr. WP316L 4K
inside A403 Gr. WP321 4L
Special finish 9 A420 Gr. WPL3 4N
A420 Gr. WPL6 4P
A403 Gr. WP321H E1
A403 Gr. WP321-WX E2
A403 Gr. S31803 W1
A234 Gr. WP91 W2
2) Wallthickness code for large size ü Wallthickness code acc. to VAI-Std. H0011
ý
3) Wallthickness code for reduced size þ Connecting wallthicknesses acc. to VAI-Std. H100 and piping specifications.
The allowable working pressure of the reducer is the same as for the straight seamless pipe with the same
outside diameter, the same connecting wallthickness and comparable material.
8) For piping components with end coding H a "certified test report" acc. to ASTM A530 shall be provided.
Edition: 2001-07
H 200
Page 15
concentric eccentric
s1
s1
s2
s2
D1
D1
D2
D2
L L
Dimensions in mm
6)
Nominal diameter Outside diameter Eccen- Connect. Weight
at bevel Length tricity wall- kg / piece
Large Reduced Large Reduced thickness concentric
DN1 DN2 D1 D2 L E s1 / s2 and eccent.
3/4" 1/2" 26,7 21,3 38,1 2,7 0,06
3/8" 17,1 4,8 0,05
1" 3/4" 33,4 26,7 50,8 3,35 2) 0,11
1/2" 21,3 6,05 3) 0,1
1" 33,4 4,4 0,15
1 1/4" 3/4" 42,4 26,7 50,8 7,75 0,13
1/2" 21,3 10,45 0,12
1 1/4" 42,2 3,05 0,23
1 1/2" 1" 48,3 33,4 63,5 7,45 0,21
3/4" 26,7 10,8 0,18
1/2" 21,3 13,5 0,17
1 1/2" 48,3 6,0 0,36
2" 1 1/4" 60,3 42,2 76,2 9,05 0,34
1" 33,4 13,45 0,30
3/4" 26,7 16,8 0,27
2" 60,3 6,35 0,62
2 1/2" 1 1/2" 73,0 48,3 88,9 12,35 0,56
1 1/4" 42,2 15,4 0,53
1" 33,4 19,8 0,49
2 1/2" 73,0 7,95 0,88
3" 2" 88,9 60,3 88,9 14,3 0,74
1 1/2" 48,3 20,3 0,68
1 1/4" 42,2 23,35 0,65
3" 88,9 6,35 1,26
2 1/2" 73,0 14,3 1,13
(3 1/2") 2" 101,6 60,3 101,6 20,65 0,96
1 1/2" 48,3 26,65 0,89
1 1/4" 42,2 29,7 0,86
Edition: 2001-07
H 200
Page 16
Edition: 2001-07
H 200
Page 17
concentric eccentric
s1
s1
s2
s2
D1
D1
D2
D2
L L
Dimensions in mm
6)
Nominal diameter Outside diameter Eccen- Connect. Weight
at bevel Length tricity wall- kg / piece
Large Reduced Large Reduced thickness concentric
DN1 DN2 D1 D2 L E s1 / s2 and eccent.
24" 609,6 25,4 89,5
26" 22" 660,4 558,8 609,6 50,8 85,9
20" 508 76,2 82,3
18" 457,2 101,6 78,6
26" 660,4 25,4 2) 96,8
28" 24" 711,2 609,6 609,6 50,8 3) 93,2
22" 558,8 76,2 89,5
20" 508 101,6 85,9
28" 711,2 25,4 104,1
30" 26" 762 660,4 609,6 50,8 100,5
24" 609,6 76,2 96,7
22" 558,8 101,6 93,2
30" 762 25,4 111,4
32" 28" 812,8 711,2 609,6 50,8 107,7
26" 660,4 76,2 104,1
24" 609,6 101,6 100,5
32" 812,8 25,4 118,6
34" 30" 836,6 762 609,6 50,8 114
28" 711,2 76,2 111,4
26" 660,4 101,6 107,7
34" 863,6 25,4 125,9
32" 812,8 50,8 122,3
36" 30" 914,4 762 609,6 76,2 118,6
28" 711,2 101,6 115
26" 660,4 127 111,4
36" 914,4 25,4 133,1
34" 863,6 50,8 129,5
38" 32" 965,2 812,8 609,6 76,2 125,8
30" 762 101,6 122,2
28" 711,2 127 118,6
26" 660,4 152,4 114,9
Edition: 2001-07
H 200
Page 18
Dimensions in mm
6)
Nominal diameter Outside diameter Eccen- Connect. Weight
at bevel Length tricity wall- kg / piece
Large Reduced Large Reduced thickness concentric
DN1 DN2 D1 D2 L E s1 / s2 and eccent.
38" 965,2 25,4 150,3
36" 914,4 50,8 136,8
40" 34" 1016 863,6 609,6 76,2 133,1
32" 812,8 101,6 129,5
30" 762 127 2) 125,8
40" 1016 25,4 3) 147,6
38" 965,2 50,8 144
42" 36" 1066,8 914,4 609,6 76,2 140,4
34" 863,6 101,6 136,8
32" 812,8 127 133,1
30" 762 152,4 129,5
42" 1066,8 25,4 154,9
44" 40" 1117,6 1016 609,6 50,8 151,2
38" 965,2 76,2 147,6
36" 914,4 101,6 144
44" 1117,6 25,4 189,1
46" 42" 1168,4 1066,8 711,2 50,8 184,9
40" 1016 76,2 180,7
38" 965,2 101,6 176,4
46" 1168,4 25,4 197,6
48" 44" 1219,2 1117,6 711,2 50,8 193,4
42" 1066,8 76,2 189,2
40" 1016 101,6 184,9
Edition: 2001-07
H 200
Page
Leerseite
Edition: 2001-07
H 200
Caps
acc. to ASME B16.9
Page 19
Partnumber
25114NE02 12" / 323,8 * 9,53 Cap A420 Gr.WPL3
Sched. Std. H200/ASME B16.9
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. - 8. 9.
7) 3) 1) Connecting 8)
Kind of Part Surface finish ASTM - Material Wallthick. Certificate
Cd. Cd. Cd. Cd. Cd. Cd.
metallic 1 A234 Gr. WPA 4A 2) ASME 2
Cap 251 outside 3 A234 Gr. WPB 4W * 0 9)
bituminated and A234 Gr. WP1 4B ASME H
limed A234 Gr. WP5 4C
protective coating 4 A234 Gr. WP11 4D
inside and outside A234 Gr. WP12 4E
protective coating 5 A234 Gr. WP22 4F
inside A403 Gr. WP304 4G
protective coating 6 A403 Gr. WP304L 4H
outside A403 Gr. WP316 4J
sandblasted 7 A403 Gr. WP316L 4K
inside A403 Gr. WP321 4L
Special finish 9 A420 Gr. WPL3 4N
A420 Gr. WPL6 4P
A403 Gr. WP321H E1
A403 Gr. WP321-WX E2
A403 Gr. S31803 W1
A234 Gr. WP91 W2
5) Length E applies for thicknesses not exceeding that given in column "Limiting Wallthickness for length E".
6) Length E1 applies for thicknesses greater than given in column "Limiting Wallthickness" and for DN24"
and smaller. For DN26" and larger, length E1 shall be agreed between manufacturer and purchaser.
The allowable working pressure of the cap is the same as for the straight seamless pipe with the same
outside diameter, the same connecting wallthickness and comparable material.
9) For piping components with end coding H a "certified test report" acc.to ASTM A530 shall be provided.
Edition: 2001-07
H 200
Page 20
s1
D
E (E1)
Dimensions in mm
Outside 5) 6) Limiting 4)
Nominal diameter Connect. wallthickn. Weight
diameter at bevel wall- Length Length for kg / piece
thickness
DN D s1 E E1 Length E
1/2" 21,3 25,4 25,4 4,57 0,032
3/4" 26,7 3,91 0,059
1" 33,4 4,55 0,10
1 1/4" 42,2 38,1 4,85 0,14
1 1/2" 48,3 2) 38,1 5,08 0,17
2" 60,3 44,45 5,56 0,23
2 1/2" 73,0 50,8 7,01 0,37
3" 88,9 50,1 63,5 7,62 0,64
(3 1/2") 101,6 63,6 76,2 8,08 0,96
4" 114,3 8,56 1,16
5" 141,3 76,2 88,9 9,53 1,91
6" 168,3 88,9 101,6 10,97 2,91
8" 219,1 101,6 127 5,13
10" 273 127 152,4 9,08
12" 323,8 152,4 177,8 13,4
14" 355,6 165,1 190,5 16
16" 406,4 177,8 203,2 12,7 20,1
18" 457,2 203,2 228,6 25,9
20" 508 228,6 254 DN3/4"-24" 32,5
22" 558,8 254 Sched.XS 39,3
24" 609,6 304,8 46,3
26" 660,4 50,8
28" 711,2 56
30" 762 266,7 56,7
32" 812,8 upon 65,8
34" 863,6 agree- 72,6
36" 914,4 ment 79,4
38" 965,2 86,2
40" 1016 304,8 95,3
42" 1066,8 104
44" 1117,6 120,2
46" 1168,4 342,9 136
48" 1219,2 159
Edition: 2001-07
Standard
Elbows
DIN2605 / Part 1 and 2 H 210
Page 1 of 11
Example of Designation of a seamless elbow 90°, type 5 (r » 2,5 da) with reduced coefficient of utilization,
Designation: outside diameter 168,3 mm, connecting wallthickness (= elbow wallthickness) = 5,6 mm,
with certificate 3.1B, material: St37.0, finish metallic
Partnumber
20C137601 168,3 * 5,6 Elbow 90° seamless reduced util. St37.0
Type 5 H210/DIN2605-1/DIN1629 cert. 3.1B
Partnumbering Code
Example of Designation of a welded elbow 45°, type 3 (r » 1,5 da) with full coefficient of utilization,
Designation: outside diameter 323,9 mm, connecting wallthickness = 3,6 mm, with certificate 3.1B,
material: 1.4571, finish metallic
Partnumber
21S173L01 323,9 * 3,6 Elbow 45° welded full utilization 1.4571
Type 3 H210/DIN2605-2/DIN17457 cert. 3.1B
Partnumbering Code
Position of Part No.
1. - 2. 3. 4. 5. - 6. 7. - 8. 9.
Kind of Part / 7) 8) 6) 1) Connect. 10)
Coefficient of Manufacturg./ Surface finish Material Wallthick. Certificate
Utilization Cd. Type Cd. Cd. Cd. Cd. Cd. Cd.
Elbows metallic 1 St35.8.I 1a) 30 * 5) 0 3.1B 1
DIN2605-1 20 Seamless 45° outside 3 St37.8.I 1b) 30 2.2 W
Reduced bituminated and H II 1b) 32 9)
Coefficient of Type 2 L limed St35.8.III 1a) 33 3.1A A
Utilization r » 1,0 da protective coating 4 St37.8.III 1b) 33 9)
Dimensions see Type 3 M inside and outside St37.4 34 3.1C C
page 5 - 7 r » 1,5 da protective coating 5 TTSt35N 35 9)
Elbows Type 5 N inside TTSt35V 36 3.1B D
DIN2605-2 21 r » 2,5 da protective coating 6 St37.0 37
Full Type 10 P outside StE 240.7 38
Coefficient of r » 5 da sandblasted 7 15Mo3 41
Utilization Type 20 Q inside 13CrMo44 42
Dimensions see r » 10 da Special finish 9 10CrMo9.10 46
page 8 - 11 Phosphated A 12CrMo19.5 V1 1a) 47
Welded 45° and oiled X20CrMoV12.1 1b) 48
Special finish S 10Ni14 52
Type 2 R for oxygen 1.4878 61
r » 1,0 da service 12CrMo19.5V 1b) RH
Type 3 S Coatings St52.4 RR
r » 1,5 da Bituminous St37.0/G SG
Type 5 T coating acc.to E TStE 255 TA
r » 2,5 da DIN30673 TStE 285 TB
Type 10 U type A3,5-G / TStE 355 TC
r » 5 da up to 40°C Stainless steels 4)
Type 20 V PE acc.to 1.4541 72
r » 10 da DIN30670-Nn N 1.4571 73
up to 50°C 1.4306 74
PE acc.to 1.4301 75
DIN30670-Nv V 1.4436 76
up to 50°C 1.4401 77
1.4404 78
1.4435 79
1.4306/HUEY-tested NH 2)
1.4306/HUEY/£ 0,25 Mo NM 2)
1.4541/STRAUSS-tested NS 3)
1.4462 NJ
1.4439 NK
1.4539 NL
Footnotes see page 3
Edition: 2003-04
H 210
Page 3
Footnotes:
1) Materials:
Stainless steels acc. to DIN17458 / 17457 resp. DIN17440
St35.8 / 15Mo3 / 13CrMo44 / 10CrMo9.10 / X20CrMoV12.1 acc. to DIN17175
St37.8 / 15Mo3 / 13CrMo44 acc. to DIN17177 for welded components only
TTSt35N / TTSt35V / 10Ni14 acc .to DIN17173 / 17174 / 17280
StE240.7 acc. to DIN17172 (or L245NB acc. to DIN-EN10208-2)
H II / 10CrMo9.10 acc. to DIN17155 for welded components only
12CrMo19.5 V1 acc. to DIN17176 for seamless components only
12CrMo19.5V acc. to VdTÜV-Wbl. 007-1 for welded components only
St37.4 / St52.4 acc. to DIN1630 / 1628
St37.0 acc. to DIN1629 / 1626
St37.0/G (stress annealed) acc. to DIN1626
TStE255 / TStE285 / TStE355 acc. to DIN17179 / 17178 / 17102
1.4462 / 1.4539 acc. to SEW 400
1.4878 acc. to SEW 470
2) With corrosion test acc. to ISO 3651 / I or ASTM A262 practice C (HUEY-TEST)
3) With corrosion test acc. to ISO 3651 / II (STRAUSS-Test) or ASTM A262 practice E
4) In the area of the pipe connection wall thickness s must also exist on the outside of the elbow.
Edition: 2003-04
H 210
Elbows
DIN2605 / Part 1 and 2
Page 4
b
r
r
e
s s
da da
b
e sa
r
b
sa
si
r
si
e
s s
da da
b
Edition: 2003-04
Dimension tables for Elbows H 210
with Reduced Coefficient of Utilization
acc. to DIN 2605-1 Page 5
Dimensions in mm
Allowable
Out- Wallthickness s coefficient of utilization Weight kg/piece
Nom. side Type series (%) for r b e for 90° elbow
diam. diam. wallthickness series for wallthickness series
DN da 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
2 53 54 57 59 17,5 28 7 0,02 0,03 0,04 0,05
15 21,3 3 1,6 - 2,0 3,2 4,0 75 - 75 75 76 28,0 38 12 0,03 - 0,04 0,06 0,08
5 85 85 85 85 42,5 53 18 0,05 0,06 0,09 0,11
2 59 60 61 62 25,0 39 10 0,04 0,05 0,07 0,09
20 26,9 3 1,6 - 2,3 3,2 4,0 67 - 68 68 69 29,0 43 12 0,05 - 0,06 0,09 0,10
5 86 86 86 86 57,5 71 24 0,09 0,13 0,17 0,20
2 52 53 54 55 25,0 42 10 0,06 0,08 0,09 0,12
25 33,7 3 2,0 - 2,6 3,2 4,0 70 - 70 70 71 38,0 56 16 0,09 - 0,12 0,14 0,17
5 86 86 86 86 72,5 90 30 0,18 0,22 0,27 0,33
2 52 52 54 54 32,0 53 13 0,10 0,13 0,17 0,19
32 42,4 3 2,0 - 2,6 3,6 4,0 70 - 70 71 71 48,0 69 20 0,15 - 0,19 0,26 0,29
5 86 86 87 87 92,5 114 38 0,29 0,37 0,50 0,55
2 51 52 53 54 38,0 62 16 0,14 0,17 0,26 0,32
40 48,3 3 2,0 - 2,6 4,0 5,0 72 - 72 73 73 57,0 82 24 0,21 - 0,26 0,39 0,48
5 87 87 87 87 107,5 132 45 0,39 0,49 0,74 0,90
2 56 56 57 58 51 81 21 0,23 0,33 0,50 0,60
3 74 74 75 75 76 106 32 0,35 0,49 0,74 0,90
50 60,3 5 2,0 - 2,9 4,5 5,6 87 - 87 87 87 135 165 56 0,62 - 0,87 1,31 1,60
10 92 93 93 93 254 284 105 1,16 1,64 2,47 3,01
20 96 96 96 96 508 538 210 2,33 3,28 4,94 6,02
2 55 55 56 57 63 102 26 0,42 0,52 0,87 1,20
3 74 74 75 75 95 133 39 0,63 0,78 1,31 1,80
65 76,1 5 2,3 - 2,9 5,0 7,1 87 - 87 87 87 175 213 73 1,16 - 1,44 2,41 3,32
10 92 92 92 93 318 356 132 2,12 2,62 4,38 6,04
20 96 96 96 96 635 673 263 4,23 5,22 8,74 12,1
2 57 57 58 59 76 121 32 0,59 0,81 1,37 1,91
3 75 75 75 76 114 159 47 0,89 1,21 2,06 2,86
80 88,9 5 2,3 - 3,2 5,6 8,0 87 - 87 87 88 205 250 85 1,60 - 2,18 3,70 5,15
10 93 93 93 93 381 425 158 2,98 4,04 6,88 9,57
20 96 96 96 96 762 806 316 5,96 8,09 13,8 19,1
2 60 60 61 61 102 159 42 1,16 1,57 2,69 3,67
3 76 76 76 77 152 210 63 1,74 2,35 4,01 5,46
100 114,3 5 2,6 - 3,6 6,3 8,8 88 - 88 88 88 270 327 112 3,08 - 4,17 7,12 9,71
10 93 93 93 93 508 565 210 5,80 7,84 13,4 18,3
20 96 96 96 96 1016 1073 421 11,6 15,7 26,8 36,5
2 61 61 61 62 127 197 53 1,78 2,67 4,13 6,38
3 77 77 77 77 190 260 79 2,66 4,00 6,17 9,55
125 139,7 5 2,6 - 4,0 6,3 10,0 88 - 88 88 88 330 400 137 4,62 - 6,94 10,7 16,6
10 93 93 93 93 635 705 263 8,90 13,4 20,6 31,9
20 97 97 97 97 1270 1340 526 17,8 26,7 41,3 63,8
2 60 61 61 61 62 152 237 63 2,58 3,91 4,34 6,73 10,2
3 77 77 77 77 77 229 313 95 3,88 5,90 6,54 10,1 15,4
150 168,3 5 2,6 4,0 4,5 7,1 11,0 87 87 87 87 88 390 474 162 6,61 10,0 11,1 17,3 26,1
10 93 93 93 93 93 762 846 316 12,9 19,6 21,8 33,7 51,1
20 97 97 97 97 97 1524 1608 631 25,8 39,2 43,5 67,5 102
2 62 62 62 63 63 203 313 84 5,00 7,68 10,5 13,3 20,3
3 77 78 78 78 78 305 414 126 7,52 11,5 15,8 19,9 30,5
200 219,1 5 2,9 4,5 6,3 8,0 12,5 87 87 87 88 88 510 620 211 12,6 19,3 26,5 33,3 51,0
10 93 93 93 93 93 1016 1126 421 25,0 38,4 52,8 66,4 102
20 97 97 97 97 97 2032 2142 842 50,0 76,9 105 133 203
Edition: 2003-04
H 210
Page 6
DN da 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
2 62 62 63 63 254 391 105 7,82 13,4 16,5 22,9
3 78 78 78 78 381 518 158 11,7 20,0 24,8 34,3
250 273 5 2,9 5,0 6,3 8,8 - 88 88 88 88 - 650 787 269 20,0 34,2 42,4 58,5 -
10 93 93 93 93 1270 1407 526 39,1 66,8 82,5 114
20 97 97 97 97 2540 2677 1052 78,2 134 165 228
2 63 63 63 63 305 467 126 11,2 21,5 26,6 37,1
3 78 78 78 78 457 619 189 16,7 32,3 39,8 55,5
300 323,9 5 2,9 5,6 7,1 10,0 - 88 88 88 88 - 775 937 321 28,4 54,8 67,5 94,2 -
10 93 93 93 93 1524 1686 631 55,6 108 133 185
20 97 97 97 97 3048 3210 1263 111 215 266 370
2 66 66 66 66 356 533 148 15,8 27,6 38,3 52,3
3 79 79 79 80 533 711 221 23,6 41,4 57,4 78,2
350 355,6 5 3,2 5,6 8,0 11,0 - 88 88 88 88 - 850 1028 352 37,6 70,0 91,5 125 -
10 94 94 94 94 1778 1956 737 78,7 138 192 261
20 97 97 97 97 3556 3734 1473 157 276 383 522
2 66 66 66 66 406 610 168 20,6 40,5 55,0 77,1
3 79 79 80 80 610 813 253 30,9 60,9 82,6 116
400 406,4 5 3,2 6,3 8,8 12,5 - 88 88 88 88 - 970 1173 402 49,2 96,9 131 184 -
10 94 94 94 94 2032 2235 842 103 203 275 386
20 97 97 97 97 4064 4267 1683 206 406 550 772
2 66 66 66 457 686 189 32,8 51,4 78,9
3 79 79 80 686 914 284 49,2 77,1 118
450 457 5 4,0 6,3 10,0 - - 88 88 88 - - 1122 1350 465 80,5 126 194 - -
10 94 94 94 2286 2515 947 164 257 395
20 97 97 97 4572 4801 1894 328 514 790
2 66 66 66 508 762 210 40,2 63,6 108
3 79 79 80 762 1016 316 60,3 95,3 162
500 508 5 4,0 6,3 11 - - 88 88 88 - - 1245 1500 516 98,5 156 264 - -
10 94 94 94 2540 2794 1052 201 318 538
20 97 97 97 5080 5334 2104 402 636 1077
2 66 66 66 610 914 253 72,5 91,8 176
3 79 79 80 914 1219 379 109 138 264
600 610 5 5,0 6,3 12,5 - - 88 88 88 - - 1525 1830 632 181 229 441 - -
10 94 94 94 3050 3355 1263 362 459 881
20 97 97 97 6100 6405 2527 724 918 1762
2 62 61 60 711 1066 295 98,7 141 247
3 75 73 72 1067 1422 442 148 211 370
700 711 5 5,0 7,1 12,5 - - 83 81 81 - - 1778 2133 737 247 352 617 - -
10 88 86 85 3555 3911 1473 493 703 1233
20 91 89 88 7110 7466 2945 987 1406 2466
2 61 60 60 813 1220 337 145 204 323
3 74 73 72 1219 1626 505 218 306 484
800 813 5 5,6 8,0 12,5 - - 82 81 81 - - 2033 2439 842 363 511 808 - -
10 87 86 85 4065 4472 1684 726 1021 1614
20 90 89 88 8130 8537 3368 1452 2042 3228
2 61 60 60 914 1371 379 207 324 408
3 74 72 72 1372 1829 568 311 487 614
900 914 5 6,3 10 12,5 - - 82 80 81 - - 2285 2742 947 518 811 1022 - -
10 87 85 85 4570 5027 1893 1035 1622 2045
20 90 88 88 9140 9597 3786 2070 3244 4090
Edition: 2003-04
H 210
Page 7
Dimensions in mm
Allowable
Out- Wallthickness s coefficient of utilization Weight kg/piece
Nom. side Type Series (%) for r b e for 90° elbow
diam. diam. wallthickness series for wallthickness series
DN da 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
2 61 60 60 1016 1524 421 262 405 506
3 74 72 72 1524 2032 631 392 608 758
1000 1016 5 6,3 10 12,5 - - 82 80 81 - - 2540 3048 1052 654 1013 1264 - -
10 87 85 85 5080 5588 2104 1308 2026 2528
20 90 88 88 10160 10668 4208 2616 4052 5056
2 61 60 1220 1830 505 370 720
3 74 72 1830 2440 758 555 1080
1200 1220 5 6,3 12,5 - - - 82 81 - - - 3050 3660 1263 924 1800 - - -
10 87 85 6100 6710 2527 1848 3600
20 90 88 12200 12810 5053 3696 7200
2 61 60 1420 2130 588
3 74 72 2130 2840 882
1400 1420 5 6,3 12,5 - - - 82 81 - - - 3550 4260 1471 - - - - -
10 87 85 7100 7810 2941
20 90 88 14200 14910 5882
2 61 60 1620 2430 671
3 74 72 2430 3240 1007
1600 1620 5 6,3 12,5 - - - 82 81 - - - 4050 4860 1678 - - - - -
10 87 85 8100 8910 3355
20 90 88 16200 17010 6710
Edition: 2003-04
Dimensions in mm
Page 8
H 210
Weight kg / piece
Nom. Outside Type Wallthickness Series r b e for 90° elbow
diam. diam. for wallthickness series s
1 4) 2 4) 3 4) 4 4) 5 4)
DN da s si sa s si sa s si sa s si sa s si sa 1 2 3 4 5
2 3,1 1,3 - - 3,8 1,7 5,6 2,6 6,7 3,2 17,5 28 7 0,03 0,04 0,06 0,07
15 21,3 3 1,6 2,2 1,4 - - - 2,0 2,7 1,8 3,2 4,2 2,8 4,0 5,2 3,4 28 38 12 0,04 - 0,05 0,07 0,09
5 1,9 1,5 - - 2,4 1,8 3,8 2,9 4,7 3,6 42,5 53 18 0,05 0,07 0,10 0,12
2 2,7 1,4 - - 3,7 1,9 5,1 2,7 6,2 3,3 25 39 10 0,05 0,07 0,09 0,11
20 26,9 3 1,6 2,4 1,4 - - - 2,3 3,4 2,0 3,2 4,6 2,7 4,0 5,6 3,3 29 43 12 0,06 - 0,07 0,11 0,12
5 1,9 1,5 - - 2,7 2,1 3,7 2,9 4,6 3,6 57,5 71 24 0,10 0,14 0,18 0,22
2 4,2 1,6 - - 5,3 2,1 6,3 2,6 7,5 3,1 25 42 10 0,09 0,12 0,13 0,17
25 33,7 3 2,0 2,9 1,7 - - - 2,6 3,7 2,2 3,2 4,5 2,7 4,0 5,5 3,4 38 56 16 0,11 - 0,15 0,17 0,24
5 2,4 1,9 - - 3,0 2,4 3,7 2,9 4,6 3,6 72,5 90 30 0,20 0,24 0,29 0,35
2 4,1 1,6 - - 5,2 2,1 6,9 2,9 7,5 3,1 32 53 13 0,15 0,20 0,25 0,27
32 42,4 3 2,0 2,9 1,7 - - - 2,6 3,7 2,2 3,6 5,0 3,1 4,0 5,5 3,4 48 69 20 0,18 - 0,23 0,31 0,35
acc.to DIN 2605-2
5 2,3 1,9 - - 3,0 2,4 4,2 3,3 4,6 3,6 92,5 114 38 0,31 0,40 0,54 0,59
2 3,9 1,6 - - 4,9 2,1 7,3 3,2 8,8 3,9 38 62 16 0,21 0,25 0,37 0,44
40 48,3 3 2,0 2,8 1,7 - - - 2,6 3,6 2,3 4,0 5,5 3,4 5,0 6,8 4,2 57 82 24 0,25 - 0,31 0,46 0,57
5 2,3 1,9 - - 3,0 2,4 4,6 3,7 5,7 4,5 107,5 132 45 0,42 0,53 0,80 0,97
2 3,5 1,7 - - 5,0 2,4 7,6 3,7 9,2 4,5 51 81 21 0,32 0,46 0,68 0,80
Dimension tables for Elbows
3 2,7 1,8 - - 3,9 2,5 6,0 3,9 7,4 4,8 76 106 32 0,41 0,57 0,86 1,04
50 60,3 5 2,0 2,3 1,9 - - - 2,9 3,4 2,7 4,5 5,2 4,1 5,6 6,4 5,1 135 165 56 0,67 - 0,94 1,41 1,71
with Full Coefficient of Utilization
10 2,2 1,9 - - 3,2 2,8 4,9 4,3 6,0 5,3 254 284 105 1,22 1,70 2,60 3,12
20 2,1 2,0 - - 3,0 2,9 4,7 4,4 5,8 5,4 508 538 210 2,39 3,34 5,00 6,20
2 4,1 1,9 - - 5,1 2,4 8,6 4,0 11,8 5,6 63 102 26 0,59 0,73 1,18 1,61
3 3,1 2,0 - - 3,9 2,5 6,7 4,3 9,3 6,0 95 133 39 0,74 0,91 1,53 2,09
65 76,1 5 2,3 2,7 2,1 - - - 2,9 3,3 2,7 5,0 5,7 4,6 7,1 8,1 6,5 175 213 73 1,26 - 1,54 2,58 3,55
10 2,5 2,2 - - 3,2 2,8 5,4 4,8 7,6 6,7 318 356 132 2,21 2,71 4,82 6,25
20 2,4 2,3 - - 3,0 2,9 5,2 4,9 7,3 6,9 635 673 268 4,32 5,31 9,53 12,4
2 4,0 1,9 - - 5,5 2,6 9,4 4,6 13,0 6,4 76 121 32 0,81 1,10 1,83 2,52
Edition: 2003-04
3 3,1 2,0 - - 4,3 2,8 7,4 4,8 10,5 6,8 114 159 47 1,04 1,42 2,39 3,31
80 88,9 5 2,3 2,7 2,1 - - - 3,2 3,7 3,0 5,6 6,4 5,1 8,0 9,1 7,3 205 250 85 1,74 - 2,35 3,96 5,50
10 2,5 2,2 - - 3,5 3,1 6,1 5,4 8,6 7,6 381 425 158 3,11 4,23 7,13 9,87
20 2,4 2,3 - - 3,3 3,2 5,8 5,5 8,3 7,8 762 806 316 6,09 8,34 14,2 19,6
Edition: 2003-04
300 323,9 5 2,9 3,3 2,7 5,6 6,4 5,2 7,1 8,1 6,5 10 11,4 9,2 16 18,1 14,6 775 937 321 30,4 58,7 72,3 101 157
10 3,1 2,8 6,0 5,4 7,6 6,8 10,7 9,6 17,1 15,3 1524 1626 631 57,6 112 138 191 313
20 3,0 2,9 5,8 5,5 7,4 7,0 10,3 9,8 16,5 15,6 3048 3210 1261 113 221 273 379 624
2 4,9 2,7 8,4 4,7 12,0 6,7 16,4 9,2 25,8 14,5 356 533 148 20,0 34,7 48,1 65,6 102
3 4,1 2,8 7,0 4,9 10,0 7,0 13,8 9,7 21,8 15,3 533 711 221 26,9 46,9 65,0 88,2 132
350 355,6 5 3,2 3,7 3,0 5,6 6,4 5,2 8,0 9,1 7,4 11 12,5 10,1 17,5 19,8 16,0 850 1028 352 40,5 75,0 97,8 134 198
Page 9
10 3,4 3,1 6,0 5,4 8,5 7,7 11,7 10,6 18,6 16,8 1778 1956 737 82,4 143 198 269 400
H 210
20 3,3 3,2 5,8 5,5 8,3 7,9 11,3 10,8 18,0 17,1 3556 3734 1473 162 283 393 536 798
Footnotes see page 3
Full Coefficient ofUtilization (Continuation)
Dimensions in mm
Page 10
H 210
Weight kg / piece
Nom. Outside Type Wallthickness Series r b e for 90° elbow
diam. diam. for wallthickness series s
1 4) 2 4) 3 4) 4 4) 5 4)
DN da s si sa s si sa s si sa s si sa s si sa 1 2 3 4 5
2 4,9 2,7 9,5 5,3 13,2 7,4 18,7 10,4 29,5 16,5 406 610 168 26,1 51,1 69,1 96,5 152
3 4,0 2,8 7,9 5,6 11,0 7,7 15,6 11,0 24,9 17,4 610 813 253 35,2 68,6 93,4 131 206
400 406,4 5 3,2 3,7 3,0 6,3 7,2 5,8 8,8 10,0 8,1 12,5 14,2 11,5 20 22,6 18,2 970 1173 402 53,0 104 140 197 311
10 3,4 3,1 6,7 6,1 9,4 8,5 13,3 12,0 21,2 19,2 2032 2235 842 108 209 283 408 627
20 3,3 3,2 6,8 6,2 9,1 8,6 12,9 12,3 20,6 19,5 4064 4267 1683 212 416 562 791 1250
2 6,1 3,4 9,5 5,3 15,0 8,4 21,1 11,8 32,7 18,3 457 686 189 41,8 64,9 99,4 140 213
3 5,0 3,5 7,9 5,6 12,5 8,8 17,7 12,4 27,6 19,4 686 914 284 56,0 87,5 133 188 289
450 457 5 4,0 4,6 3,7 6,3 7,1 5,8 10 11,3 9,2 14,2 16,0 13,0 22,2 25,0 20,3 1122 1350 465 86,5 135 207 291 447
10 4,3 3,9 6,7 6,1 10,7 9,6 15,1 13,6 23,6 21,3 2286 2515 947 170 265 407 572 878
20 4,2 4,0 6,5 6,2 10,3 9,8 14,6 13,9 22,8 21,7 4572 4801 1894 336 526 810 1140 1752
2 6,1 3,4 9,5 5,3 16,5 9,2 23,8 13,3 36,8 20,7 508 762 210 51,3 81,3 137 196 299
3 5,0 3,5 7,9 5,6 13,8 9,7 20,0 14,0 31,1 21,8 762 1016 316 68,6 108 183 262 403
500 508 5 4,0 4,6 3,7 6,3 7,2 5,8 11 12,5 10,1 16 18,1 14,7 25 28,2 22,9 1245 1500 516 106 167 282 405 621
10 4,3 3,9 6,7 6,1 11,7 10,6 17,0 15,4 26,5 23,9 2540 2794 1052 209 328 567 797 1222
20 4,2 4,0 6,5 6,2 11,3 10,8 16,5 15,7 25,7 24,4 5080 5334 2104 412 651 1131 1588 2440
2 7,6 4,2 9,5 5,3 18,7 10,4 26,1 14,6 44,1 24,8 610 914 253 92,1 113 222 309 514
3 6,3 4,4 7,9 5,6 15,7 11,0 21,9 15,3 37,3 26,2 914 1219 379 123 157 299 414 694
600 610 5 5,0 5,7 4,6 6,3 7,1 5,8 12,5 14,1 11,5 17,5 19,7 16,1 30 33,7 27,5 1525 1830 632 194 244 469 653 1093
10 5,4 4,8 6,7 6,1 13,3 12,0 18,6 16,8 31,9 28,7 3050 3355 1263 376 474 906 1261 2114
20 5,2 4,9 6,5 6,2 12,9 12,3 18,0 17,1 30,8 29,3 6100 6405 2527 746 940 1804 2515 4215
2 7,4 4,3 10,7 6,0 18,5 10,5 29,5 16,7 46,8 26,5 711 1066 295 124 179 310 488 763
3 6,2 4,5 8,8 6,3 15,5 11,0 24,8 17,6 39,7 28,0 1067 1422 442 167 238 416 658 1031
700 711 5 5,0 5,6 4,7 7,1 8,0 6,6 12,5 14,0 11,5 20 22,5 18,4 32 35,9 29,4 1778 2133 737 262 374 656 1035 1626
10 5,3 4,9 7,6 6,9 13,3 12,0 - - - - 3555 3911 1473 513 728 1268 - -
20 5,2 4,9 7,3 7,0 12,9 12,3 - - - - 7110 7466 2945 1026 1446 2525 - -
2 8,3 4,8 12,0 6,8 18,5 10,5 32,8 18,5 52,8 29,9 813 1220 337 183 259 406 710
Edition: 2003-04
3 7,0 5,0 10,0 7,1 15,5 11,0 27,6 19,5 44,7 31,5 1219 1626 505 245 344 544 955
800 813 5 5,6 6,3 5,2 8,0 9,0 7,4 12,5 14,0 11,5 22,2 24,9 20,4 36 40,4 33,0 2033 2439 842 386 543 860 1501 -
10 6,0 5,4 8,5 7,7 13,3 12,0 - - - - 4065 4472 1684 752 1085 1659 -
20 5,8 5,5 8,3 7,9 12,9 12,3 - - - - 8130 8537 3368 1491 2170 3305 -
Dimensions in mm
Weightkg / piece
Nom. Outside Type Wallthickness Series r b e for 90° elbow
diam. diam. for wallthickness series s
1 4) 2 4) 3 4) 4 4) 5 4)
DN da s si sa s si sa s si sa s si sa s si sa 1 2 3 4 5
2 9,3 5,3 15,0 8,4 18,5 10,5 36,9 20,9 58,6 33,2 914 1371 379 261 411 512 1010
3 7,8 5,6 12,6 8,8 15,5 11,0 31,1 21,9 49,6 35,0 1372 1829 568 350 553 690 1360
900 914 5 6,3 7,1 5,8 10 11,4 9,2 12,5 14,0 11,5 25 28,1 23,0 40 44,9 36,7 2285 2742 947 551 868 1087 2136 -
10 6,7 6,1 10,8 9,6 13,3 12,0 - - - - 4570 5027 1893 1068 1671 2102 -
20 6,5 6,2 10,5 9,8 12,9 12,3 - - - - 9140 9597 3768 2119 3325 4188 -
2 9,3 5,3 15,0 8,4 18,5 10,5 41,3 23,3 65,9 37,3 1016 1524 421 329 512 636 1395
3 7,8 5,6 12,6 8,8 15,5 11,0 34,8 24,6 55,8 39,3 1524 2032 631 442 690 852 1879
1000 1016 5 6,3 7,1 5,8 10 11,4 9,2 12,5 14,0 11,5 28 31,5 25,7 45 50,5 41,3 2540 3048 1052 696 1084 1340 2956 -
10 6,7 6,1 10,8 9,6 13,3 12,0 - - - - 5080 5588 2140 1350 2087 2599 -
20 6,5 6,2 10,5 9,8 12,9 12,3 - - - - 10160 10668 4208 2678 4153 5177 -
2 9,3 5,4 18,5 10,5 - - - - - - 1220 1830 505 464 901
3 7,8 5,6 15,5 11,0 - - - - - - 1830 2440 758 625 1213
1200 1220 5 6,3 7,1 5,8 12,5 14,0 11,5 - - - - - - - - - 3050 3660 1263 983 1915 - - -
10 6,7 6,1 13,3 12,0 - - - - - - 6100 6710 2527 1907 3701
20 6,5 6,2 12,9 12,3 - - - - - - 12200 12810 5058 3784 7373
2 9,3 5,4 18,5 10,5 - - - - - - 1420 2130 588
3 7,8 5,6 15,5 11,0 - - - - - - 2130 2840 882
1400 1420 5 6,3 7,1 5,8 12,5 14,0 11,5 - - - - - - - - - 3550 4260 1471 - - - - -
10 6,7 6,1 13,3 12,0 - - - - - - 7100 7810 2941
20 6,5 6,2 12,9 12,3 - - - - - - 14200 14910 5882
2 9,3 5,3 18,5 10,5 - - - - - - 1620 2430 671
3 7,8 5,6 15,5 11,0 - - - - - - 2430 3240 1007
1600 1620 5 6,3 7,1 5,8 12,5 14,0 11,5 - - - - - - - - - 4050 4860 1678 - - - - -
10 6,7 6,1 13,3 12,0 - - - - - - 8100 8910 3355
Edition: 2003-04
20 6,5 6,2 12,9 12,3 - - - - - - 16200 17010 6710
Footnotes see page 3
Page 11
H 210
Standard
Mitre Bends
acc. to AWWA C208
H 220A
Part No.: 2 2 3) 2) 1) 4) 5) 7)
Page 1 of 3
Example of Designation of a 4 piece mitre bend 90° with outside diameter 711 mm, and mitre wallthickness
Designation: s = 12,7 mm, connecting wallthickness 9,53 mm, metallic, material: API 5L Gr.B
Partnumber
22113BEF2 711 * 9,53 Mitre bend 90 Degr. 4 Piece API 5L Gr.B
TM = 12,7mm H220A / AWWA C208 / Fig. 2C / E = 0,85
Partnumbering Code
1) Materials:
API 5L Gr.B may be substituted by ASTM A53 Gr.B or A106 Gr.B
A283 Gr.B may be substituted be equivalent plate material e.g. ASTM A285 Gr.B.
Protective coating outside shall be made acc. to VAI-regulation HE705.
4) Wallthickness code for mating pipe acc. to VAI-Std. H 100 for ASME- / API- pipes
Matching of wallthickness to the mating pipe shall be made by manufacturer acc. to ASME B16.25.
5) Code for mitre-wallthickness acc.to VAI-Std. H 100 for API- or ASME- wallthickness.
This code is only necessary if mitre thickness is not equal to the mating thickness.
8) For piping components with end coding H a certified test report acc. to ASTM A530 shall be provided.
Page 2
°
30
°
30
T90
15°
15°
T60
S
S
R90 R60
da
da
C90 C60
L90 L60
°
5
7,5
T4
0,5-2
0
T3
5°
22,
15°
DN 400 - 2000
11,25°
50°
7,5°
T45
T30
S
R30
R45
**)
da
da
Edition: 2000-06
H 220A
Page 3
Nom. Outside *) *) *)
diam. diam. R30 R45 R60 C30 C45 C60 T30 T45 T60 L30 L45 L60 S
DN da 9)
200 219,1 688,3 492,6 393,9 14,4 21,8 29,4 184,4 204,1 227,4 362 392 422 152,4
250 273 715,3 519,6 420,9 18,0 27,2 36,6 191,7 215,2 243,0 377 413 451 152,4
300 323,9 758,8 557,0 455,2 21,3 32,2 43,4 203,3 230,7 262,8 400 443 488 157,2
350 355,6 804,8 592,8 485,9 23,4 35,4 47,6 215,7 245,5 280,5 424 472 521 165,1
400 406,4 878,5 650,1 535,0 26,8 40,4 54,4 235,4 269,3 308,9 463 517 573 177,8
500 508 1025,7 764,8 633,2 33,4 50,5 68,1 274,8 316,8 365,6 540 608 679 203,2
600 610 1173,2 879,6 731,6 40,2 60,7 81,7 314,4 364,4 422,4 618 700 784 228,6
700 711 1320,2 994,0 829,5 46,8 70,7 95,3 353,7 411,7 478,9 695 791 889 254,0
800 813 1467,6 1108,8 927,9 53,5 80,9 108,9 393,2 459,3 535,7 773 882 994 279,4
900 914 1614,6 1223,2 1025,8 60,2 90,9 122,5 432,6 506,7 592,2 850 973 1099 304,8
1000 1016 1665,6 1274,2 1076,8 66,9 101,0 136,1 446,3 527,8 621,7 877 1014 1154 304,8
1200 1219 1767,1 1375,7 1178,3 80,2 121,2 163,3 473,5 569,8 680,3 931 1095 1263 304,8
1400 1422 1868,6 1477,2 1279,8 93,6 141,4 190,5 500,7 611,9 738,9 984 1175 1372 304,8
1600 1626 1970,6 1579,2 1381,8 107,0 161,7 217,8 528,0 654,1 797,8 1038 1256 1481 304,8
1800 1829 2072,1 1680,7 1483,3 120,4 181,9 245,0 555,2 696,2 856,4 1091 1337 1590 304,8
2000 2032 2173,6 1782,2 1584,8 133,8 202,1 272,2 582,4 738,2 915,0 1145 1418 1699 304,8
Nom. Outside *)
diam. diam. R90 = T90 C90 L90 S
DN da 9)
200 219,1 393,9 29,4 633 152,4
250 273 420,9 36,6 677 152,4
300 323,9 455,2 43,4 732 157,2
350 355,6 485,9 47,6 781 165,1
400 406,4 535,0 54,4 860 177,8
500 508 633,2 68,1 1018 203,2
600 610 731,6 81,7 1176 228,6
700 711 829,5 95,3 1334 254,0
800 813 927,9 108,9 1492 279,4
900 914 1025,8 122,5 1649 304,8
1000 1016 1076,8 136,1 1731 304,8
1200 1219 1178,3 163,3 1894 304,8
1400 1422 1279,8 190,5 2057 304,8
1600 1626 1381,8 217,8 2221 304,8
1800 1829 1483,3 245,0 2385 304,8
2000 2032 1584,8 272,2 2548 304,8
*) The total length L30 to L90 do not include the width of the cutting tool.
Edition: 2000-06
Standard
Tees
DIN2615 / Part 1 and 2 H 230
Page 1 of 19
Example of Designation of a welded tee with reduced coefficient of utilization, run pipe outside diameter d1 = 406,4 mm,
Designation: connecting wallthickness s1 = 4,0 mm, branch pipe outside diameter d2 = 219,1 mm, connecting
wallthickness s2 = 3,6 mm, with certificate 3.1B, material: 1.4541, finish metallic
Partnumber
23B1722M1 406,4 * 4,0 / 219,1 * 3,6 Tee welded reduced utilization 1.4541
H230/DIN2615-1/DIN17457 cert. 3.1B
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. - 8. 9.
6) 5) 1) Connecting 8)
Kind of Part / Surface finish Material Wallthickn. Certificate
Coefficient of Utilization Cd. Cd. Cd. Cd. Cd. Cd.
Reduced metallic 1 St35.8.I 1a) 30 * 4) * 4) 3.1B 1
Coefficient of Utilization outside 3 St37.8.I 1b) 30 2.2 W
DIN2615 / Part 1 bituminated and H II 1b) 32 7)
Dimensions see page 4 - 7 limed St35.8.III 1a) 33 3.1A A
Tee seamless 23A protective coating 4 St37.8.III 1b) 33 7)
Tee welded 23B inside and outside St37.4 34 3.1C C
Full protective coating 5 TTSt35N 35 7)
Coefficient of Utilization inside TTSt35V 36 3.1B D
DIN2615 / Part 2 protective coating 6 St37.0 37
Dimensions see page 8 - 19 outside StE 240.7 38
Tee seamless 23C sandblasted 7 15Mo3 41
Tee welded 23D inside 13CrMo44 42
Special finish 9 10CrMo9.10 46
Phosphated A 12CrMo19.5 V1 1a) 47
and oiled X20CrMoV12.1 1a) 48
Special finish S 10Ni14 52
for oxygen 1.4878 61
service 12CrMo19.5V 1b) RH
Coatings St52.4 RR
Bituminous St37.0/G SG
coating acc.to E TStE 255 TA
DIN30673 TStE 285 TB
type A3,5-G / TStE 355 TC
up to 40°C Stainless steels
PE acc.to 1.4541 72
DIN30670-Nn N 1.4571 73
up to 50°C 1.4306 74
PE acc.to 1.4301 75
DIN30670-Nv V 1.4436 76
up to 50°C 1.4401 77
1.4404 78
1.4435 79
1.4306/HUEY-tested NH 2)
1.4306/HUEY/£ 0,25 Mo NM 2)
1.4541/STRAUSS-Test NS 3)
1.4462 NJ
1.4439 NK
1.4539 NL
Footnotes see page 2
Page 2
Footnotes:
1) Materials:
Stainless steels acc. to DIN17458 / 17457 resp. DIN17440
St35.8 / 15Mo3 / 13CrMo44 / 10CrMo9.10 / X20CrMoV12.1 acc. to DIN17175
St37.8 / 15Mo3 / 13CrMo44 acc. to DIN17177 for welded components only
TTSt35N / TTSt35V / 10Ni14 acc. to DIN17173 / 17174 / 17280
StE240.7 acc. to DIN17172 (or L245NB acc. to DIN-EN10208-2)
H II / 10CrMo9.10 acc. to DIN17155 for welded components only
12CrMo19.5 V1 acc. to DIN17176 for seamless components only
12CrMo19.5V acc. to VdTÜV-Wbl. 007-1 for welded components only
St37.4 / St52.4 acc. to DIN1630 / 1628
St37.0 acc. to DIN1629 / 1626
St37.0/G (stress annealed) acc. to DIN1626
TStE255 / TStE285 / TStE355 acc. to DIN17179 / 17178 / 17102
1.4462 / 1.4539 acc. to SEW 400
1.4878 acc. to SEW 470
2) With corrosion test acc. to ISO 3651 / I or ASTM A262 practice C (HUEY-TEST)
3) With corrosion test acc. to ISO 3651 / II (STRAUSS-Test) or ASTM A262 practice E
Edition: 2005-01
Tees
H 230
DIN2615 / Part 1 and 2
Page 3
t1
s1 r
b
s3 < 5°
t 2
d1
< 5°
a a
U1 U2
d4
d2
s4 s2
s3
t1
r
b
< 5°
d1
d3
t2
s1
<5°
a a
r ³ s1
U1+ U 2 t1 + t 2
Common: a = b=
2 2
Edition: 2005-01
Dimensions in mm
Page 4
H 230
Edition: 2005-01
80 88,9 2,3 - 3,2 5,6 8,0 86 38 - 42 50 55
65 76,1 2,3 - 2,9 5,0 7,1 83 42 - 44 51 56
80 88,9 2,3 - 3,2 5,6 8,0 50 60,3 2,0 - 2,9 4,5 5,6 86 76 45 - 51 55 56 1,45 - 1,95 3,70 4,60
40 48,3 2,0 - 2,6 4,0 5,0 73 51 - 54 59 60
32 42,4 2,0 - 2,6 3,6 4,0 70 55 - 58 60 59
Reduced Coefficient of Utilization (Continuation)
Dimensions in mm
Edition: 2005-01
300 323,9 2,9 5,6 7,1 10,0 16,0 254 26 33 36 40 46
250 273,0 2,9 5,0 6,3 8,8 14,2 241 30 34 37 41 48
300 323,9 2,9 5,6 7,1 10,0 16,0 200 219,1 2,9 4,5 6,3 8,0 12,5 254 229 34 37 43 45 51 19,0 35,0 42,0 59,0 92,0
150 168,3 2,6 4,0 4,5 7,1 11,0 219 37 41 42 49 55
125 139,7 2,6 - 4,0 6,3 10,0 216 42 - 45 52 59 -
Page 5
H 230
Reduced Coefficient of Utilization (Continuation)
Page 6
Dimensions in mm
H 230
Edition: 2005-01
500 508,0 4,0 6,3 11,0 16,0 - 432 26 31 36 42 - 108 138 242 333 -
450 457,0 4,0 6,3 10,0 14,2 - 419 27 34 37 41 -
600 610,0 5,0 6,3 12,5 17,5 - 400 406,4 3,2 6,3 8,8 12,5 - 432 406 27 36 37 42 - 108 138 242 - -
350 355,6 3,2 5,6 8,0 11,0 - 406 28 36 39 42 -
300 323,9 2,9 5,6 7,1 10,0 - 397 29 39 39 43 - 108 138 242 333 -
250 273,0 2,9 5,0 6,3 8,8 - 384 32 40 41 46 -
Reduced Coefficient of Utilization (Continuation)
Dimensions in mm
Edition: 2005-01
500 508,0 4,0 6,3 11,0 - - 635 28 33 41 - -
450 457,0 4,0 6,3 10,0 - - 622 30 35 42 - -
1200 1220,0 6,3 12,5 - - - 838 22 29 - - -
1000 1016,0 6,3 10,0 - - - 813 25 29 - - -
1200 1220,0 6,3 12,5 - - - 900 914,0 6,3 10,0 - - - 889 787 27 30 - - -
800 813,0 5,6 8,0 - - - 787 26 30 - - -
Page 7
Edition: 2005-01
H 230
Page 9
Edition: 2005-01
H 230
Page 10
Edition: 2005-01
H 230
Page 11
Edition: 2005-01
H 230
Page 12
Edition: 2005-01
H 230
Page 13
Edition: 2005-01
H 230
Page 14
Edition: 2005-01
H 230
Page 15
Edition: 2005-01
H 230
Page 16
Edition: 2005-01
H 230
Page 17
Edition: 2005-01
H 230
Page 18
Edition: 2005-01
H 230
Page 19
Edition: 2005-01
Branch Reinforcements Standard
acc.to AD-Merkblatt B9
made from Pipe acc.to DIN2448 / DIN2458
H 239
Part No. 2 3 9 P 1) 2) 0 3)
Page 1 of 4
Example of Designation of a reinforcement pad made from run pipe with run pipe outside diameter Da = 610 mm
Designation: and wallthickness 6,3 mm, and branch pipe nominal diameter DN300, with works report 2.2,
material: St37.0
Partnumber
239P37H0W 610 x 6,3 / 300 Reinforcement pad
made from run pipe H239 cert. 2.2 St37.0
Partnumbering Code
Stainless steels
1.4541 72
1.4571 73
1.4306 74
1.4301 75
1.4436 76
1.4401 77
1.4404 78
1.4462 NJ
1.4439 Nk
1.4539 NL
2) Wallthickness code acc.to VAI-Std. H0010 for run pipe thickness (= pad thickness).
Page 2
da sB ~DN
b
H
Vent hole
5 mm
sR
Da
DN
Edition: 97-02
H239
Page 3
Edition: 97-02
H239
Page 4
Edition: 97-02
Branch Reinforcements Standard
made from Pipe acc.to ASME / API
H239A
Part No. 2 3 9 P 1) 2) 0 2
Page 1 of 3
Example of Designation of a reinforcement pad made from run pipe with run pipe outside diameter
Designation: Da = 610 mm and wallthickness 9,53 mm, and branch pipe nominal diameter DN300,
material: API 5L Gr.B
Partnumber
239P3BK02 610 x 9,53 / 300 Reinforcement pad
made from run pipe H239A API 5L Gr.B
Partnumbering Code
API 5L Gr.B 3B
A312 Gr.TP304L 3E
A335 Gr.P11 Cl.1 3R
2) Wallthickness code acc.to VAI-Std. H0011 for run pipe thickness (= pad thickness).
Page 2
Reinforcement Pad
Quantity in pieces. No separate delivery of material, as pad is manufactured from run pipe on site.
da sB ~DN
b
H
Vent hole
5 mm
sR
Da
DN
Page 3
Edition: 97-02
Standard
Reducers
DIN2616 / Part 1 and 2 H 240
Page 1 of 15
Partnumber
24E141JJ1 219,1 * 6,3 / 168,3 * 4,5 Reducer conc. seamless full utilization 15Mo3
H240/DIN2616-2/DIN17175 cert. 3.1B
Partnumbering code
Page 2
Footnotes:
1) Materials:
Stainless steels acc. to DIN17458 / 17457 resp. DIN17440
St35.8 / 15Mo3 / 13CrMo44 / 10CrMo9.10 / X20CrMoV12.1 acc. to DIN17175
St37.8 / 15Mo3 / 13CrMo44 acc. to DIN17177 for welded components only
TTSt35N / TTSt35V / 10Ni14 acc. to DIN17173 / 17174 / 17280
StE240.7 acc. to DIN17172 (or L245NB acc. to DIN-EN10208-2)
H II / 10CrMo9.10 acc. to DIN17155 for welded components only
12CrMo19.5 V1 acc. to DIN17176 for seamless components only
12CrMo19.5V acc. to VdTÜV-Wbl. 007-1 for welded components only
St37.4 / St52.4 acc. to DIN1630 / 1628
St37.0 acc. to DIN1629 / 1626
St37.0/G (stress annealed) acc. to DIN1626
TStE255 / TStE285 / TStE355 acc. to DIN17179 / 17178 / 17102
1.4462 / 1.4539 acc. to SEW 400
1.4878 acc. to SEW 470
2) With corrosion test acc. to ISO 3651 / I or ASTM A262 practice C (HUEY-TEST)
3) With corrosion test acc. to ISO 3651 / II (STRAUSS-Test) or ASTM A262 practice E
Edition: 2003-04
Reducers
H 240
acc.to DIN2616 / Part 1 and 2
Page 3
Reducers
with Reduced coefficient of Utilization
DIN2616 / Part1
Eccentric Reducer
s1
Radius r and
other dimensions
see DIN2616-1
r
DN1 d1 - d 2
a=
d1
s2
a
d2
DN2
Welding bevel acc. to DIN2609
l1
Reducers
with Full Coefficient of Utilization
DIN2616 / Part 2
r r
s3
r
s1
s1
s3
DN1 r DN1
s2
DN2
d1
d1
d2
s2
a
DN2
d2
l1 l1
Welding bevel acc. to DIN2609
Edition: 2003-04
Dimensions in mm
Page 4
H 240
DN1 d1 1 2 3 4 5 DN2 d2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
15 21,3 1,6 - 2,0 3,2 4,0 10 10 17,2 1,6 - 1,8 2,9 - 38 97 - 95 91 - 0,03 - 0,03 0,05 -
20 26,9 1,6 - 2,3 3,2 4,0 15 15 21,3 1,6 - 2,0 3,2 4,0 38 99 - 98 96 100 0,04 - 0,05 0,08
27 10 17,2 1,6 - 1,8 2,9 - 100 - 100 100 - -
25 33,7 2,0 - 2,6 3,2 4,0 13 20 26,9 1,6 - 2,3 3,2 4,0 50 98 - 97 96 100 0,07 - 0,09 0,11 0,13
24 15 21,3 1,6 - 2,0 3,2 4,0 100 - 100 100 100
16 25 33,7 2,0 - 2,6 3,2 4,0 99 - 99 97 100
32 42,4 2,0 - 2,6 3,6 4,0 32 20 26,9 1,6 - 2,3 3,2 4,0 50 100 - 100 100 100 0,09 - 0,11 0,14 0,17
42 15 21,3 1,6 - 2,0 3,2 4,0 98 - 100 100 100
8 32 42,4 2,0 - 2,6 3,6 4,0 98 - 97 95 100
40 48,3 2,0 - 2,6 4,0 5,0 19 25 33,7 2,0 - 2,6 3,2 4,0 64 99 - 99 98 100 0,13 - 0,17 0,27 0,31
acc.to DIN 2616-1
80 88,9 2,3 - 3,2 5,6 8,0 30 50 60,3 2,0 - 2,9 4,5 5,6 90 92 - 97 98 100 0,42 - 0,55 0,93 1,30
44 40 48,3 2,0 - 2,6 4,0 5,0 89 - 90 94 100
50 32 42,4 2,0 - 2,6 3,6 4,0 83 - 85 90 98
24 80 88,9 2,3 - 3,2 5,6 8,0 97 - 98 98 100
100 114,3 2,6 - 3,6 6,3 8,8 37 65 76,1 2,3 - 2,9 5,0 7,1 100 91 - 92 94 99 0,70 - 0,98 1,68 2,29
51 50 60,3 2,0 - 2,9 4,5 5,6 79 - 80 84 94
Edition: 2003-04
60 40 48,3 2,0 - 2,6 4,0 5,0 67 - 69 74 87
18 100 114,3 2,6 - 3,6 6,3 8,8 98 - 98 98 100
125 139,7 2,6 - 4,0 6,3 10,0 35 80 88,9 2,3 - 3,2 5,6 8,0 127 91 - 92 94 97 1,13 - 1,70 2,63 4,06
43 65 76,1 2,3 - 2,9 5,0 7,1 85 - 86 88 88
41 50 60,3 2,0 - 2,9 4,5 5,6 76 - 76 81 83
Reduced Coefficient of Utilization (Continuation)
Dimensions in mm
Edition: 2003-04
55 150 168,3 2,6 4,0 4,5 7,1 11,0 69 71 73 75 80
11 400 406,4 3,2 6,3 8,8 12,5 20,0 99 99 99 98 99
24 350 355,6 3,2 5,6 8,0 11,0 17,5 96 96 97 97 99
450 457,0 4,0 6,3 10,0 14,2 22,2 31 300 323,9 2,9 5,6 7,1 10,0 16,0 381 92 93 94 95 97 17,4 27,2 41,9 59,0 90,6
41 250 273,0 2,9 5,0 6,3 8,8 14,2 84 85 87 88 92
50 200 219,1 2,9 4,5 6,3 8,0 12,5 75 76 78 80 84
Page 5
H 240
Reduced Coefficient of Utilization (Continuation)
Page 6
H 240
Dimensions in mm
DN1 d1 1 2 3 4 5 DN2 d2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
8 450 457,0 4,0 6,3 10,0 14,2 22,2 99 99 99 98 99
18 400 406,4 3,2 6,3 8,8 12,5 20,0 98 98 98 98 100
500 508,0 4,0 6,3 11,0 16,0 25,0 27 350 355,6 3,2 5,6 8,0 11,0 17,5 508 94 94 95 96 98 25,6 40,4 68,5 98,5 151
32 300 323,9 2,9 5,6 7,1 10,0 16,0 91 92 93 94 97
40 250 273,0 2,9 5,0 6,3 8,8 14,2 85 86 87 89 92
46 200 219,1 2,9 4,5 6,3 8,0 12,5 78 80 82 83 87
17 500 508,0 4,0 6,3 11,0 16,0 25,0 98 98 98 98 98
27 450 457,0 4,0 6,3 10,0 14,2 22,2 94 94 95 95 97
600 610 5,0 6,3 12,5 17,5 30,0 35 400 406,4 3,2 6,3 8,8 12,5 20,0 508 88 89 90 91 93 38,4 48,6 93,4 130 217
42 350 355,6 3,2 5,6 8,0 11,0 17,5 82 82 84 86 89
46 300 323,9 2,9 5,6 7,1 10,0 16,0 78 78 80 82 85
51 250 273,0 2,9 5,0 6,3 8,8 14,2 72 72 75 76 80
19 600 610 5,0 6,3 12,5 17,5 30,0 97 97 98 98 98
34 500 508,0 4,0 6,3 11,0 16,0 25,0 89 89 91 92 94
700 711 5,0 7,1 12,5 20,0 32,0 40 450 457,0 4,0 6,3 10,0 14,2 22,2 610 84 84 86 87 90 53,9 76,0 134 212 315
45 400 406,4 3,2 6,3 8,8 12,5 20,0 79 79 81 83 86
50 350 355,6 3,2 5,6 8,0 11,0 17,5 73 74 75 77 80
52 300 323,9 2,9 5,6 7,1 10,0 16,0 70 71 73 75 78
19 700 711 5,0 7,1 12,5 20,0 32,0 97 97 97 98 98 69,0 97,6 153 - -
34 600 610 5,0 6,3 12,5 17,5 30,0 88 89 90 91 93
800 813 5,6 8,0 12,5 22,2 36,0 45 500 508,0 4,0 6,3 11,0 16,0 25,0 610 78 79 80 82 85
50 450 457,0 4,0 6,3 10,0 14,2 22,2 72 73 74 77 80 69,0 97,6 153 269 435
53 400 406,4 3,2 6,3 8,8 12,5 20,0 68 69 70 73 76
57 350 355,6 3,2 5,6 8,0 11,0 17,5 62 63 65 67 70
Edition: 2003-04
19 800 813 5,6 8,0 12,5 22,2 36,0 97 97 97 98 98
34 700 711 5,0 7,1 12,5 20,0 32,0 88 89 89 91 93
900 914 6,3 10,0 12,5 25,0 40,0 45 600 610 5,0 6,3 12,5 17,5 30,0 610 78 79 79 82 84 86,0 137 173 340 539
53 500 508,0 4,0 6,3 11,0 16,0 25,0 68 69 69 72 75
56 450 457,0 4,0 6,3 10,0 14,2 22,2 63 65 65 68 71
59 400 406,4 3,2 6,3 8,8 12,5 20,0 59 60 61 63 67
Reduced Coefficient of Utilization (Continuation)
Dimensions in mm
Edition: 2003-04
Page 7
H 240
Page 8
H 240
Dimensions in mm
DN1 d1 1 2 3 4 5 DN2 d2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
15 21,3 1,6 - 2,0 3,2 4,0 6 10 17,2 1,6 - 1,8 2,9 - 38 1,6 - 2,0 3,2 -
20 26,9 1,6 - 2,3 3,2 4,0 8 15 21,3 1,6 - 2,0 3,2 4,0 38 1,6 - 2,3 3,2 4,0
12 10 17,2 1,6 - 1,8 2,9 - 1,6 - 2,3 3,2 -
25 33,7 2,0 - 2,6 3,2 4,0 7 20 26,9 1,6 - 2,3 3,2 4,0 50 2,0 - 2,6 3,2 4,0
12 15 21,3 1,6 - 2,0 3,2 4,0
9 25 33,7 2,0 - 2,6 3,2 4,0
32 42,4 2,0 - 2,6 3,6 4,0 15 20 26,9 1,6 - 2,3 3,2 4,0 50 2,0 - 2,6 3,6 4,0
19 15 21,3 1,6 - 2,0 3,2 4,0
6 32 42,4 2,0 - 2,6 3,6 4,0
acc.to DIN 2616-2
40 48,3 2,0 - 2,6 4,0 5,0 10 25 33,7 2,0 - 2,6 3,2 4,0 64 2,0 - 2,6 4,0 5,0
16 20 26,9 1,6 - 2,3 3,2 4,0
7 40 48,3 2,0 - 2,6 4,0 5,0
50 60,3 2,0 - 2,9 4,5 5,6 11 32 42,4 2,0 - 2,6 3,6 4,0 76 2,0 - 2,9 4,5 5,6
16 25 33,7 2,0 - 2,6 3,2 4,0
21 20 26,9 1,6 - 2,3 3,2 4,0
9 50 60,3 2,0 - 2,9 4,5 5,6
with Full Coefficient of Utilization
65 76,1 2,3 - 2,9 5,0 7,1 15 40 48,3 2,0 - 2,6 4,0 5,0 90 2,3 - 2,9 5,0 7,1
18 32 42,4 2,0 - 2,6 3,6 4,0
23 25 33,7 2,0 - 2,6 3,2 4,0
7 65 76,1 2,3 - 2,9 5,0 7,1
Dimension tables for Concentric Reducers
80 88,9 2,3 - 3,2 5,6 8,0 16 50 60,3 2,0 - 2,9 4,5 5,6 90 2,3 - 3,2 5,6 8,0
22 40 48,3 2,0 - 2,6 4,0 5,0
26 32 42,4 2,0 - 2,6 3,6 4,0
13 80 88,9 2,3 - 3,2 5,6 8,0
100 114,3 2,6 - 3,6 6,3 8,8 18 65 76,1 2,3 - 2,9 5,0 7,1 100 2,6 - 3,6 6,3 8,8
Edition: 2003-04
26 50 60,3 2,0 - 2,9 4,5 5,6
31 40 48,3 2,0 - 2,6 4,0 5,0
10 100 114,3 2,6 - 3,6 6,3 8,8
125 139,7 2,6 - 4,0 6,3 10,0 20 80 88,9 2,3 - 3,2 5,6 8,0 127 2,6 - 4,0 6,3 10,0
25 65 76,1 2,3 - 2,9 5,0 7,1
30 50 60,3 2,0 - 2,9 4,5 5,6
Full Coefficient of Utilization, concentric (Continuation)
Dimensions in mm
DN1 d1 1 2 3 4 5 DN2 d2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
9 125 139,7 2,6 4,0 4,0 6,3 10,0
150 168,3 2,6 4,0 4,5 7,1 11,0 19 100 114,3 2,6 3,6 3,6 6,3 8,8 140 2,6 4,0 4,5 7,1 11,0
27 80 88,9 2,3 3,2 3,2 5,6 8,0
31 65 76,1 2,3 2,9 2,9 5,0 7,1
18 150 168,3 2,6 4,0 4,5 7,1 11,0
200 219,1 2,9 4,5 6,3 8,0 12,5 27 125 139,7 2,6 4,0 4,0 6,3 10,0 152 2,9 4,5 6,3 8,0 12,5
33 100 114,3 2,6 3,6 3,6 6,3 8,8
39 80 88,9 2,3 3,2 3,2 5,6 8,0
16 200 219,1 2,9 4,5 6,3 8,0 12,5 2,9 5,0 6,3 8,8 14,2
250 273,0 2,9 5,0 6,3 8,8 14,2 30 150 168,3 2,6 4,0 4,5 7,1 11,0 178
36 125 139,7 2,6 4,0 4,0 6,3 10,0 3,0 5,0 6,3 8,8 14,2
40 100 114,3 2,6 3,6 3,6 6,3 8,8 3,1 5,0 6,3 8,8 14,2
12 250 273,0 2,9 5,0 6,3 8,8 14,2 2,9 5,6 7,1 10,0 16,0
300 323,9 2,9 5,6 7,1 10,0 16,0 24 200 219,1 2,9 4,5 6,3 8,0 12,5 203
35 150 168,3 2,6 4,0 4,5 7,1 11,0 3,0 5,6 7,1 10,0 16,0
40 125 139,7 2,6 4,0 4,0 6,3 10,0 3,1 5,6 7,1 10,0 16,0
6 300 323,9 2,9 5,6 7,1 10,0 16,0
350 355,6 3,2 5,6 8,0 11,0 17,5 14 250 273,0 2,9 5,0 6,3 8,8 14,2 330 3,2 5,6 8,0 11,0 17,5
22 200 219,1 2,9 4,5 6,3 8,0 12,5
29 150 168,3 2,6 4,0 4,5 7,1 11,0
8 350 355,6 3,2 5,6 8,0 11,0 17,5
13 300 323,9 2,9 5,6 7,1 10,0 16,0
400 406,4 3,2 6,3 8,8 12,5 20,0 21 250 273,0 2,9 5,0 6,3 8,8 14,2 355 3,2 6,3 8,8 12,5 20,0
28 200 219,1 2,9 4,5 6,3 8,0 12,5
Edition: 2003-04
34 150 168,3 2,6 4,0 4,5 7,1 11,0
7 400 406,4 3,2 6,3 8,8 12,5 20,0
14 350 355,6 3,2 5,6 8,0 11,0 17,5
450 457,0 4,0 6,3 10,0 14,2 22,2 18 300 323,9 2,9 5,6 7,1 10,0 16,0 381 4,0 6,3 10,0 14,2 22,2
25 250 273,0 2,9 5,0 6,3 8,8 14,2
31 200 219,1 2,9 4,5 6,3 8,0 12,5
Page 9
H 240
Full Coefficient of Utilization, concentric (Continuation)
Page 10
H 240
Dimensions in mm
DN1 d1 1 2 3 4 5 DN2 d2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
4 450 457,0 4,0 6,3 10,0 14,2 22,2
10 400 406,4 3,2 6,3 8,8 12,5 20,0
500 508,0 4,0 6,3 11,0 16,0 25,0 17 350 355,6 3,2 5,6 8,0 11,0 17,5 508 4,0 6,3 11,0 16,0 25,0
20 300 323,9 2,9 5,6 7,1 10,0 16,0
24 250 273,0 2,9 5,0 6,3 8,8 14,2
29 200 219,1 2,9 4,5 6,3 8,0 12,5
10 500 508,0 4,0 6,3 11,0 16,0 25,0
15 450 457,0 4,0 6,3 10,0 14,2 22,2
600 610 5,0 6,3 12,5 17,5 30,0 21 400 406,4 3,2 6,3 8,8 12,5 20,0 508 5,0 6,3 12,5 17,5 30,0
26 350 355,6 3,2 5,6 8,0 11,0 17,5
29 300 323,9 2,9 5,6 7,1 10,0 16,0
33 250 219,1 2,9 5,0 6,3 8,8 14,2 5,1 6,3 12,5 17,5 30,0
10 600 610 5,0 6,3 12,5 17,5 30,0
15 500 508,0 4,0 6,3 11,0 16,0 25,0
700 711 5,0 7,1 12,5 20,0 32,0 20 450 457,0 4,0 6,3 10,0 14,2 22,2 610 5,0 7,1 12,5 20,0 32,0
25 400 406,4 3,2 6,3 8,8 12,5 20,0
30 350 355,6 3,2 5,6 8,0 11,0 17,5
33 300 323,9 2,9 5,6 7,1 10,0 16,0
10 700 711 5,0 7,1 12,5 20,0 32,0
15 600 610 5,0 6,3 12,5 17,5 30,0
800 813 5,6 8,0 12,5 22,2 36,0 20 500 508,0 4,0 6,3 11,0 16,0 25,0 610 5,6 8,0 12,5 22,2 36,0
25 450 457,0 4,0 6,3 10,8 14,2 22,2
30 400 406,4 3,2 6,3 8,8 12,5 20,0
35 350 355,6 3,2 5,6 8,0 11,0 17,5 5,8 8,0 12,5 22,2 36,0
Edition: 2003-04
10 800 813 5,6 8,0 12,5 22,2 36,0
15 700 711 5,0 7,1 12,5 20,0 32,0
900 914 6,3 10,0 12,5 25,0 40,0 20 600 610 5,0 6,3 12,5 17,5 30,0 610 6,3 10,0 12,5 25,0 40,0
25 500 508,0 4,0 6,3 11,0 16,0 25,0
30 450 457,0 4,0 6,3 10,0 14,2 22,2 6,4 10,0 12,5 25,0 40,0
35 400 406,4 3,2 6,3 8,8 12,5 20,0 6,5 10,0 12,5 25,0 40,0
Full Coefficient of Utilization, concentric (Continuation)
Dimensions in mm
DN1 d1 1 2 3 4 5 DN2 d2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
10 900 914 6,3 10,0 12,5 25,0 40,0
15 800 813 5,6 8,0 12,5 22,2 36,0
1000 1016 6,3 10,0 12,5 28,0 45,0 20 700 711 5,0 7,1 12,5 20,0 32,0 610 6,3 10,0 12,5 28,0 45,0
25 600 610 5,0 6,3 12,5 17,5 30,0
30 500 508,0 4,0 6,3 11,0 16,0 25,0
35 450 457,0 4,0 6,3 10,0 14,2 22,2 6,4 10,2 12,5 28,0 45,0
10 1000 1016 6,3 10,0 - - -
15 900 914 6,3 10,0 - - - 6,3 12,5 - - -
1200 1220 6,3 12,5 - - - 20 800 813 5,6 8,0 - - - 711
25 700 711 5,0 7,1 - - - 6,4 12,5 - - -
30 600 610 5,0 6,3 - - - 6,6 12,5 - - -
Edition: 2003-04
Page 11
H 240
Page 12
H 240
Dimensions in mm
DN1 d1 1 2 3 4 5 DN2 d2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
15 21,3 1,6 - 2,0 3,2 4,0 10 10 17,2 1,6 - 1,8 2,9 - 38 1,7 - 2,1 3,6 - 0,03 - 0,04 0,06 -
20 26,9 1,6 - 2,3 3,2 4,0 15 15 21,3 1,6 - 2,0 3,2 4,0 38 1,6 - 2,4 3,4 4,0 0,04 - 0,05 0,07 0,09
27 10 17,2 1,6 - 1,8 2,9 - 1,6 - 2,3 3,2 - 0,04 - 0,05 0,06 -
25 33,7 2,0 - 2,6 3,2 4,0 13 20 26,9 1,6 - 2,3 3,2 4,0 50 2,1 - 2,7 3,4 4,0 0,08 - 0,10 0,13 0,15
24 15 21,3 1,6 - 2,0 3,2 4,0 2,0 - 2,6 3,2 4,0 0,08 - 0,10 0,12 0,15
16 25 33,7 2,0 - 2,6 3,2 4,0 2,1 - 2,7 3,7 4,0 0,10 - 0,14 0,17 0,20
32 42,4 2,0 - 2,6 3,6 4,0 30 20 26,9 1,6 - 2,3 3,2 4,0 50 2,0 - 2,6 3,6 4,0 0,10 - 0,13 0,17 0,20
42 15 21,3 1,6 - 2,0 3,2 4,0 2,1 - 2,6 3,6 4,0 0,10 - 0,13 0,17 0,20
8 32 42,4 2,0 - 2,6 3,6 4,0 2,1 - 2,7 4,3 5,0 0,15 - 0,19 0,30 0,34
acc.to DIN 2616-2
40 48,3 2,0 - 2,6 4,0 5,0 19 25 33,7 2,0 - 2,6 3,2 4,0 64 2,1 - 2,7 4,1 5,0 0,15 - 0,19 0,28 0,34
28 20 26,9 1,6 - 2,3 3,2 4,0 2,1 - 2,6 4,0 5,0 0,15 - 0,18 0,28 0,34
13 40 48,3 2,0 - 2,6 4,0 5,0 2,1 - 3,0 4,7 5,6 0,22 - 0,31 0,48 0,57
50 60,3 2,0 - 2,9 4,5 5,6 20 32 42,4 2,0 - 2,6 3,6 4,0 76 2,1 - 3,0 4,6 5,6 0,22 - 0,31 0,46 0,57
29 25 33,7 2,0 - 2,6 3,2 4,0 2,1 - 3,0 4,6 5,6 0,22 - 0,31 0,46 0,57
36 20 26,9 1,6 - 2,3 3,2 4,0 2,2 - 3,1 4,6 5,6 0,22 - 0,36 0,46 0,57
15 50 60,3 2,0 - 2,9 4,5 5,6 2,4 - 3,0 5,1 7,2 0,41 - 0,47 0,79 1,10
with Full Coefficient of Utilization
65 76,1 2,3 - 2,9 5,0 7,1 27 40 48,3 2,0 - 2,6 4,0 5,0 90 2,4 - 3,0 5,1 7,1 0,41 - 0,47 0,79 1,09
34 32 42,4 2,0 - 2,6 3,6 4,0 2,4 - 3,0 5,1 7,1 0,41 - 0,47 0,79 1,09
42 25 33,7 2,0 - 2,6 3,2 4,0 2,5 - 3,1 5,2 7,1 0,41 - 0,50 0,79 1,09
Dimension tables for Eccentric Reducers
13 65 76,1 2,3 - 2,9 5,0 7,1 2,4 - 3,3 5,8 8,0 0,50 - 0,61 1,06 1,44
80 88,9 2,3 - 3,2 5,6 8,0 30 50 60,3 2,0 - 2,9 4,5 5,6 90 2,5 - 3,3 5,7 8,0 0,50 - 0,61 1,04 1,44
44 40 48,3 2,0 - 2,6 4,0 5,0 2,6 - 3,6 6,0 8,0 0,50 - 0,68 1,09 1,44
50 32 42,4 2,0 - 2,6 3,6 4,0 2,8 - 3,8 6,3 8,1 0,50 - 0,70 1,15 1,48
24 80 88,9 2,3 - 3,2 5,6 8,0 2,7 - 3,7 6,5 8,8 0,83 - 0,98 1,72 2,29
100 114,3 2,6 - 3,6 6,3 8,8 37 65 76,1 2,3 - 2,9 5,0 7,1 100 2,9 - 3,9 6,7 8,9 0,83 - 1,05 1,78 2,33
Edition: 2003-04
51 50 60,3 2,0 - 2,9 4,5 5,6 3,3 - 4,5 7,5 9,6 0,85 - 1,22 2,00 2,50
60 40 48,3 2,0 - 2,6 4,0 5,0 3,9 - 5,3 8,7 10,8 1,05 - 1,42 2,27 2,75
18 100 114,3 2,6 - 3,6 6,3 8,8 2,7 - 4,1 6,4 10,0 1,30 - 1,70 2,64 4,06
125 139,7 2,6 - 4,0 6,3 10,0 35 80 88,9 2,3 - 3,2 5,6 8,0 127 2,9 - 4,4 6,8 10,1 1,30 - 1,85 2,80 4,10
43 65 76,1 2,3 - 2,9 5,0 7,1 3,1 - 4,7 7,2 10,6 1,30 - 2,14 2,96 4,25
51 50 60,3 2,0 - 2,9 4,5 5,6 3,5 - 5,2 7,9 11,3 1,52 - 2,40 3,58 4,50
Full Coefficient of Utilization, eccentric (Continuation)
Dimensions in mm
DN1 d1 1 2 3 4 5 DN2 d2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
18 125 139,7 2,6 4,0 4,0 6,3 10,0 2,7 4,1 4,6 7,3 11,0 1,50 2,30 2,55 4,00 5,98
150 168,3 2,6 4,0 4,5 7,1 11,0 34 100 114,3 2,6 3,6 3,6 6,3 8,8 140 2,9 4,4 4,9 7,6 11,3 1,70 2,60 2,80 4,30 6,15
48 80 88,9 2,3 3,2 3,2 5,6 8,0 3,4 5,1 5,7 8,7 12,5 2,00 2,85 3,20 4,80 6,72
52 65 76,1 2,3 2,9 2,9 5,0 7,1 3,6 5,4 6,0 9,2 13,1 2,07 3,14 3,43 5,00 7,10
31 150 168,3 2,6 4,0 4,5 7,1 11,0 3,2 4,9 6,8 8,6 12,9 2,62 4,07 5,24 6,70 9,89
200 219,1 2,9 4,5 6,3 8,0 12,5 45 125 139,7 2,6 4,0 4,0 6,3 10,0 152 3,7 5,6 7,7 9,7 14,2 2,87 4,50 6,20 7,70 10,9
55 100 114,3 2,6 3,6 3,6 6,3 8,8 4,4 6,6 9,1 11,3 16,2 3,66 5,24 7,25 8,70 12,3
61 80 88,9 2,3 3,2 3,2 5,6 8,0 5,1 7,6 10,4 13,0 18,3 4,07 6,00 8,20 9,80 13,8
28 200 219,1 2,9 4,5 6,3 8,0 12,5 3,2 5,4 7,6 9,3 14,6 3,84 6,60 8,80 10,8 16,4
250 273,0 2,9 5,0 6,3 8,8 14,2 48 150 168,3 2,6 4,0 4,5 7,1 11,0 178 3,9 6,6 8,2 11,3 17,0 4,78 7,80 9,60 12,8 19,0
55 125 139,7 2,6 4,0 4,0 6,3 10,0 4,5 7,5 9,3 12,7 18,9 5,37 8,80 10,7 14,3 20,5
60 100 114,3 2,6 3,6 3,6 6,3 8,8 5,1 8,4 10,5 14,3 21,0 5,96 9,50 13,4 16,2 23,3
23 250 273,0 2,9 5,0 6,3 8,8 14,2 3,1 5,9 7,4 10,4 16,2 4,89 9,70 13,0 16,4 24,9
300 323,9 2,9 5,6 7,1 10,0 16,0 44 200 219,1 2,9 4,5 6,3 8,0 12,5 203 3,7 7,0 8,8 12,2 18,5 5,90 11,3 13,8 19,3 28,2
55 150 168,3 2,6 4,0 4,5 7,1 11,0 4,5 8,5 10,6 14,6 21,7 7,28 13,6 18,4 22,3 32,6
60 125 139,7 2,6 4,0 4,0 6,3 10,0 5,1 9,6 12,0 16,4 24,2 8,10 15,1 19,2 25,2 36,3
8 300 323,9 2,9 5,6 7,1 10,0 16,0 3,3 5,7 8,1 11,2 17,7 9,30 16,1 22,8 31,0 48,5
350 355,6 3,2 5,6 8,0 11,0 17,5 25 250 273,0 2,9 5,0 6,3 8,8 14,2 330 3,4 5,8 8,3 11,3 17,5 10,3 16,3 23,4 31,5 48,1
37 200 219,1 2,9 4,5 6,3 8,0 12,5 3,6 6,2 8,8 11,9 18,1 10,6 17,8 24,8 33,0 50,5
47 150 168,3 2,6 4,0 4,5 7,1 11,0 4,0 6,9 9,6 12,9 19,4 11,6 20,1 26,4 36,5 53,1
15 350 355,6 3,2 5,6 8,0 11,0 17,5 3,3 6,4 8,9 12,7 20,0 11,5 22,7 31,7 43,5 67,8
24 300 323,9 2,9 5,6 7,1 10,0 16,0 3,4 6,5 9,1 12,8 20,0 12,6 22,9 32,2 44,0 67,8
400 406,4 3,2 6,3 8,8 12,5 20,0 36 250 273,0 2,9 5,0 6,3 8,8 14,2 355 3,6 7,0 9,7 13,5 20,8 13,0 24,6 36,5 46,0 70,0
46 200 219,1 2,9 4,5 6,3 8,0 12,5 4,0 7,7 10,6 14,8 22,3 14,3 27,7 40,8 50,0 75,0
Edition: 2003-04
55 150 168,3 2,6 4,0 4,5 7,1 11,0 4,7 8,9 12,1 16,8 25,0 16,7 31,2 43,0 57,0 83,4
11 400 406,4 3,2 6,3 8,8 12,5 20,0 4,1 6,4 10,1 14,4 22,3 17,4 28,0 42,6 60,0 91,0
24 350 355,6 3,2 5,6 8,0 11,0 17,5 4,2 6,6 10,3 14,6 22,3 17,6 28,5 43,8 61,0 91,0
450 457,0 4,0 6,3 10,0 14,2 22,2 31 300 323,9 2,9 5,6 7,1 10,0 16,0 381 4,4 6,8 10,7 15,0 22,7 19,2 29,3 44,9 63,0 93,0
41 250 273,0 2,9 5,0 6,3 8,8 14,2 4,8 7,4 11,5 16,1 24,1 21,0 32,0 48,5 67,0 98,0
50 200 219,1 2,9 4,5 6,3 8,0 12,5 5,4 8,3 12,8 17,8 26,3 23,2 35,4 53,0 73,0 105
Page 13
H 240
Full Coefficient of Utilization, eccentric (Continuation)
Page 14
H 240
Dimensions in mm
DN1 d1 1 2 3 4 5 DN2 d2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
8 450 457,0 4,0 6,3 10,0 14,2 22,2 4,1 6,4 11,1 16,3 25,3 25,6 40,6 68,6 99,0 152
18 400 406,4 3,2 6,3 8,8 12,5 20,0 4,1 6,5 11,2 16,3 25,0 25,6 41,7 70,0 99,0 151
500 508,0 4,0 6,3 11,0 16,0 25,0 27 350 355,6 3,2 5,6 8,0 11,0 17,5 508 4,3 6,7 11,5 16,7 25,4 27,0 43,3 73,0 102 153
32 300 323,9 2,9 5,6 7,1 10,0 16,0 4,4 6,9 11,8 17,1 25,8 25,5 44,9 75,0 106 156
40 250 273,0 2,9 5,0 6,3 8,8 14,2 4,8 7,4 12,6 18,1 27,1 30,4 47,7 78,0 112 162
46 200 219,1 2,9 4,5 6,3 8,0 12,5 5,1 7,9 13,5 19,2 28,6 32,0 49,7 86,0 118 171
17 500 508,0 4,0 6,3 11,0 16,0 25,0 5,1 6,5 12,7 17,8 30,4 38,4 50,0 94,0 132 220
27 450 457,0 4,0 6,3 10,0 14,2 22,2 5,4 6,7 13,2 18,3 30,9 42,4 52,0 99,0 137 224
600 610 5,0 6,3 12,5 17,5 30,0 35 400 406,4 3,2 6,3 8,8 12,5 20,0 508 5,7 7,1 13,9 19,2 32,0 44,7 54,5 105 143 231
42 350 355,6 3,2 5,6 8,0 11,0 17,5 6,1 7,7 14,8 20,4 33,7 46,3 60,0 112 151 244
46 300 323,9 2,9 5,6 7,1 10,0 16,0 6,5 8,1 15,6 21,4 35,1 50,0 62,0 117 158 257
51 250 273,0 2,9 5,0 6,3 8,8 14,2 7,0 8,7 16,8 23,0 37,4 54,0 66,5 127 172 272
19 600 610 5,0 6,3 12,5 17,5 30,0 5,2 7,3 12,8 20,4 32,5 53,9 78,7 136 216 334
34 500 508,0 4,0 6,3 11,0 16,0 25,0 5,7 8,0 13,8 21,8 34,0 62,0 86,0 147 226 350
700 711 5,0 7,1 12,5 20,0 32,0 40 450 457,0 4,0 6,3 10,0 14,2 22,2 610 6,0 8,4 14,6 22,8 35,5 65,0 91,0 155 237 366
45 400 406,4 3,2 6,3 8,8 12,5 20,0 6,4 9,0 15,4 24,1 37,2 70,0 97,0 163 252 385
50 350 355,6 3,2 5,6 8,0 11,0 17,5 6,9 9,7 16,6 25,9 39,5 75,0 104 175 270 406
52 300 323,9 2,9 5,6 7,1 10,0 16,0 7,1 10,0 17,2 26,7 40,7 77,0 107 181 277 420
19 700 711 5,0 7,1 12,5 20,0 32,0 5,8 8,2 12,8 22,7 36,6 74,0 99,5 157 273 430
34 600 610 5,0 6,3 12,5 17,5 30,0 6,4 9,0 13,9 24,3 38,5 80,5 111 168 290 455
800 813 5,6 8,0 12,5 22,2 36,0 45 500 508,0 4,0 6,3 11,0 16,0 25,0 610 7,2 10,2 15,6 27,0 42,3 87,0 124 189 325 502
50 450 457,0 4,0 6,3 10,0 14,2 22,2 7,8 11,0 16,8 29,0 45,1 96,0 135 203 347 529
53 400 406,4 3,2 6,3 8,8 12,5 20,0 8,2 11,6 17,8 30,6 47,2 99,0 143 216 364 553
57 350 355,6 3,2 5,6 8,0 11,0 17,5 9,0 12,6 19,3 33,1 50,8 111 155 231 395 578
Edition: 2003-04
19 800 813 5,6 8,0 12,5 22,2 36,0 6,5 10,3 12,8 25,5 40,7 90,5 141 177 343 528
34 700 711 5,0 7,1 12,5 20,0 32,0 7,2 11,2 14,0 27,4 43,0 100 155 192 370 570
900 914 6,3 10,0 12,5 25,0 40,0 45 600 610 5,0 6,3 12,5 17,5 30,0 610 9,1 12,7 15,8 30,6 47,3 112 175 216 411 625
53 500 508,0 4,0 6,3 11,0 16,0 25,0 9,3 14,5 18,0 34,7 53,0 128 200 245 468 695
56 450 457,0 4,0 6,3 10,0 14,2 22,2 9,9 15,5 19,2 36,8 56,1 137 214 261 495 720
59 400 406,4 3,2 6,3 8,8 12,5 20,0 10,7 16,6 20,6 39,7 59,8 150 227 273 520 745
Full Coefficient of Utilization, eccentric (Continuation)
Dimensions in mm
DN1 d1 1 2 3 4 5 DN2 d2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5
19 900 914 6,3 10,0 12,5 25,0 40,0 6,5 10,3 12,9 28,6 45,9 86,5 158 198 435 671
34 800 813 5,6 8,0 12,5 22,2 36,0 7,2 11,3 14,0 30,8 48,5 111 174 213 460 715
1000 1016 6,3 10,0 12,5 28,0 45,0 45 700 711 5,0 7,1 12,5 20,0 32,0 610 8,2 12,8 15,9 34,4 53,5 126 197 242 525 780
54 600 610 5,0 6,3 12,5 17,5 30,0 9,6 15,0 18,6 39,8 61,2 148 230 282 590 890
61 500 508,0 4,0 6,3 11,0 16,0 25,0 11,4 17,8 22,0 46,9 71,3 175 270 330 690 1010
64 450 457,0 4,0 6,3 10,0 14,2 22,2 12,5 19,5 24,1 51,2 77,5 192 298 360 760 1100
60 1000 1016 6,3 10,0 - - - 7,0 13,7 - - - 152 295 - - -
41 900 914 6,3 10,0 - - - 7,8 15,3 - - - 170 330 - - -
1200 1220 6,3 12,5 - - - 49 800 813 5,6 8,0 - - - 711 8,8 17,2 - - - 190 370 - - -
55 700 711 5,0 7,1 - - - 10,0 19,3 - - - 216 415 - - -
60 600 610 5,0 6,3 - - - 11,3 21,8 - - - 245 470 - - -
Edition: 2003-04
Page 15
H 240
Standard
Caps
DIN2617 H 250
Page 1 of 3
Example of Designation of a cap with outside diameter 323,9 mm and connecting wallthickness s1 = 7,1
Designation: with certificate 2.2, material: St37.0, finish metallic
Partnumber
25A137J0W 323,9 * 7,1 Cap "full coefficient of utilization" St37.0
H250/DIN2617/1626 cert. 2.2
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. - 8. 9.
5) 1) Connecting 8)
Kind of Part / Surface finish Material wallthick. Certificate
Coefficient of Utilization Cd. Cd. Cd. Cd. Cd. Cd.
6) metallic 1 St35.8.I 1a) 30 * 4) 0 3.1B 1
Cap DIN2617 25A outside 3 St37.8.I 1b) 30 2.2 W
bituminated and H II 1b) 32 7)
limed St35.8.III 1a) 33 3.1A A
protective coating 4 St37.8.III 1b) 33 7)
inside and outside St37.4 34 3.1C C
protective coating 5 TTSt35N 35 7)
inside TTSt35V 36 3.1B D
protective coating 6 St37.0 37
outside StE 240.7 38
sandblasted 7 15Mo3 41
inside 13CrMo44 42
Special finish 9 10CrMo9.10 46
Phosphated A 12CrMo19.5 V1 1a) 47
and oiled X20CrMoV12.1 1a) 48
Special finish for S 10Ni14 52
oxygen service 1.4878 61
Coatings 12CrMo19.5V 1b) RH
Bituminous St52.4 RR
coating acc.to E St37.0/G SG
DIN30673 TStE 255 TA
type A3,5-G / TStE 285 TB
up to 40°C TStE 355 TC
PE acc.to Stainless steels
DIN30670-Nn N 1.4541 72
up to 50°C 1.4571 73
PE acc.to 1.4306 74
DIN30670-Nv V 1.4301 75
up to 50°C 1.4436 76
1.4401 77
1.4404 78
1.4435 79
1.4306/HUEY-tested NH 2)
1.4306/HUEY/ £ 0,25 NM 2)
Mo
1.4541/STRAUSS-test NS 3)
1.4462 NJ
1.4439 NK
1.4539 NL
Footnotes see page 2
Page 2
Footnotes:
1) Materials:
Stainless steels acc. to DIN17458/17457 resp. DIN17440
St35.8 / 15Mo3 / 13CrMo44 / 10CrMo9.10 / X20CrMoV12.1 acc. to DIN17175
St37.8 / 15Mo3 / 13CrMo44 acc. to DIN17177 for welded components only
TTSt35N / TTSt35V / 10Ni14 acc. to DIN17173 / 17174 / 17280
StE240.7 acc. to DIN17172 (or L245NB acc. to DIN-EN10208-2)
H II / 10CrMo9.10 acc. to DIN17155 for welded components only
12CrMo19.5 V1 acc. to DIN17176 for seamless components only
12CrMo19.5V acc. to VdTÜV-Wbl. 007-1 for welded components only
St37.4 / St52.4 acc. to DIN1630/1628
St37.0 acc. to DIN1629 / 1626
St37.0/G (stress annealed) acc. to DIN1626
TStE255 / TStE285 / TStE355 acc. to DIN17179/17178/17102
1.4462 / 1.4539 acc. to SEW 400
1.4878 acc. to SEW 470
2) With corrosion test acc. to ISO 3651/I or ASTM A262 practice C (HUEY-test)
3) With corrosion test acc. to ISO 3651/II (STRAUSS-test) or ASTM A262 practice E
6) The allowable working pressure corresponds with the allowable internal pressure
of the connecting pipe with wallthick. s1 ("full coefficient of utilization").
Edition: 2003-04
H 250
Page 3
Welding bevel
acc. to DIN2609
s2
dome-shaped part
r1
r2
h
cylindrical part
Ball
s1
r 1 » 0,8 da
da r 2 » 0,154 da
s2 ³ s1
Dimensions in mm
Limit
Wallthicknesses s1, s2 Height h for wallth. Weight kg / piece
Nomin. Outsid Series s1 £ s1 > for for wallthickness series
e
diam. diam. 1 2 3 4 5 Limit wallth. height
*) §) *) *) *) *) 1 2 3 4 5
DN Da s1 s2 s1 s1 s1 s1 h
15 21,3 1,6 - - 2 3,2 4 - 0,05 - 0,06 0,10 0,13
20 26,9 1,6 - - 2,3 3,2 4 25 - 0,06 - 0,08 0,11 0,14
25 33,7 2 - - 2,6 3,2 4 38 - 0,15 - 0,19 0,24 0,29
32 42,4 2 - - 2,6 3,6 4 38 - 0,08 - 0,10 0,14 0,16
40 48,3 2 - - 2,6 4 5 38 - 0,09 - 0,12 0,18 0,23
50 60,3 2 - - 2,9 4,5 5,6 38 - 0,12 - 0,17 0,27 0,33
65 76,1 2,3 - - 2,9 5 7,1 38 - 0,18 - 0,23 0,50 0,71
80 88,9 2,3 - - 3,2 5,6 8 51 - 0,28 - 0,38 0,67 0,96
100 114,3 2,6 - - 3,6 6,3 8,8 64 - 0,51 - 0,70 1,23 1,72
125 139,7 2,6 - - 4 6,3 10 76 - 0,75 - 1,14 1,80 2,86
150 168,3 2,6 - 4 4,5 7,1 11 89 - 1,06 1,63 1,83 2,89 4,48
200 219,1 2,9 - 4,5 6,3 8 12,5 102 - 1,85 2,86 4,00 5,10 8,00
250 273,0 2,9 - 5 6,3 8,8 14,2 127 - 2,90 5,00 6,30 8,80 14,2
300 323,9 2,9 3 5,6 7,1 10 16 152 - 4,20 7,80 9,90 14,0 22,5
350 355,6 3,2 3,3 5,6 8 11 17,5 165 - 5,60 9,40 13,5 18,5 29,5
400 406,4 3,2 3,4 6,3 8,8 12,5 20 178 - 7,20 13,3 18,6 26,5 42,5
450 457 4 4,1 6,3 10 14,2 22,2 203 - 11,0 17,0 27,0 38,5 60,0
500 508 4 4,2 6,3 11 16 25 229 - 14,1 21,1 36,8 54,0 84,0
600 610 5 5,1 6,3 12,5 17,5 30 267 - 24,2 30,0 60,0 83,0 143
700 711 5 5,3 7,1 12,5 20 32 267 290 25 31,5 42,0 74,0 118 198
800 813 5,6 5,9 8 12,5 22,5 36 267 330 17,5 42,5 58,0 90,0 179 290
900 914 6,3 6,7 10 12,5 25 40 267 370 10 58,0 86,0 127 254 407
1000 1016 6,3 7 10 12,5 28 45 305 420 14,2 76,0 106 135 356 572
1200 1220 6,3 7,2 12,5 - - - 343 360 10 110 193 - - -
*) s2 ³ s1 (also see §)
§) In the range DN300 to DN1200 for series 1-wallthickness s2 shall meet at least specified values of column s2.
Edition: 2003-04
Standard
Socket - Welding Steel Fittings
for DIN-Tubing
H 287
Part No. 2 8 7 2) 1) 3) 4)
Page 1 of 5
Example of Designation of an elbow 90°, class 3000, for tube outside diameter 16 mm, with test report 2.2
Designation: material: 1.4541
Partnumber
2871720QW 16 SW-Elbow 90° class 3000 for DIN-tube
H287 cert. 2.2 1.4541
Partnumbering Code
1) Materials:
C22.8 acc. to DIN17248
St37.0 / St52.0 acc. to DIN1629
Stainless materials acc. to DIN17440
4) Requirements for dimensions acc. to this standard, for materials acc. to DIN-Stds.
and certificate acc. to EN10204 (DIN50049)
Not specified dimensions shall be furnished acordingly.
Manufacturer´s dimensions may slightly deviate from specified standard dimensions.
Page 2
A
A1
Elbow - 90° Elbow - 45°
T
D D
C B C B
Dimensions in mm
Tube Elbow 90° Elbow 45° Weight kg / 100 pieces
Outside Dimension A Dimension A1 Elbow 90° Elbow 45°
Diameter
1000 3000 6000 1000 3000 6000 1000 3000 6000 1000 3000 6000
10 11 11 10
12 11 - 10
14 11 - 10
16 14 16 12
20 16 19 15
25 19 22 17
30 22 27 20
38 27 32 25
(42) 27 32 25
C B C B
D D
C
A2
A3
A2
A3
Dimensions in mm
Tube Tee Cross Weight kg / 100 pieces
Outside Dimension A2 Dimension A3 Tee Cross
Diameter
1000 3000 6000 1000 3000 6000 1000 3000 6000 1000 3000 6000
10 11 11 11 11
12 11 - 11 -
14 11 - 11 -
16 14 16 14 16
20 16 19 16 19
25 19 22 19 22
30 22 27 22 27
38 27 32 27 32
(42) 27 32 27 32
Common dimensions B, C, D, T see page 5.
Edition: 98-10
H 287
Page 3
T
T
L
E
F
T
T
D D D
C B B
Dimensions in mm
Tube Weight kg / 100 pieces
Outside Laying length Coupling Half Coupling
Diameter
E F 1000 3000 6000 1000 3000 6000
10 6 16
12 6 16
14 6 16
16 6 17
20 10 22
25 10 24
30 13 29
38 13 30
(42) 13 30
Reducing Coupling
Dimensions in mm
Tube OD Big 10 12 16 20
Small 8 10 8 12 10 8 16 12 10 8
Length L 26 26 30 36
Weight 3000
kg/100 pcs. 6000
Tube OD Big 25 30 38
Small 20 16 12 10 8 25 20 16 12 10 30 25 20
Length L 38 45 47
Weight 3000
kg/100 pcs. 6000
Edition: 98-10
H 287
Page 4
Reducer Insert
U
U
Q
Q
Q
D
D
D
S
B
B
S
1 1
2 1 2
R T R T
R T 2
Dimensions in mm
Weigth
Tube Type Q R S U kg / 100 pieces
Outside diam.
• ‚ 1000 3000 6000 1000 3000 6000 1000 3000 6000 1000 3000 6000
10 8 2 10 15 14 14 12
12 10 2 12 17 18 18 14
8 2 16 14 14 12
12 2 20 22 22 16
16 10 2 16 17 18 18 12
8 1 21 - - -
16 2 22 22 27 17,5
20 12 2 20 20 22 22 17,5
10 3 23 18 18 10
8 3 24 14 14 8
20 2 23 27 34 19
16 3/2 24 22 27 14
25 12 3 25 26 22 22 12,5
10 3 26 18 20 10
8 3 27 14 14 8
25 2 25 34 43 22
20 3/2 29 27 34 14
30 16 3 30 31 22 27 12,5
12 3 31 22 22 11
10 3 31 18 20 8
30 2 26 43 50 20,5
38 25 3/2 38 30 34 43 16
20 3 32 27 34 14
Edition: 98-10
H 287
Page 5
Cap
C B
M
Dimensions in mm
Tube
Outside Dimension M Weight kg/100 pcs.
Diameter
1000 3000 6000 1000 3000 6000
10 16 18
12 18 20
14 18 20
16 20 24
20 25 27
25 27 30
30 30 32
38 32 35
(42) 35 38
Edition: 98-10
Standard
Welding ends
with NPT-thread acc. to ASME B1.20.1
H 318
Part No. 3 1 8 2) 1) 0 0 3)
Page 1 of 2
Example of Designation of a welding end with nominal diameter 4“ and wallthickness s = 6,02 mm
Designation: (Sched. 40), material: A53 Gr.A
Partnumber
31832A002 4“ Welding end / NPT-Thread
Sched. 40 / L = 100 H318 / ASME B36.10 A53 Gr.A
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. -8. 9.
2) 1) Wallthick- 3)
Kind of Part Type Material ness Certificate
Cd. Cd. Cd. Cd. Cd. Cd.
Welding ends Schedule 40 3 A53 Gr.A 2A 0 0 ASME 2
with 318 Schedule 80 5 A53 Gr.B 2B 4)
NPT-thread Schedule 160 9 A106 Gr.A 2C ASME H
A106 Gr.B 2D
Schedule 40S C
Schedule 80S D A312 Gr.TP304 3D
A312 Gr.TP304L 3E
A312 Gr.TP316 3G
A312 Gr.TP316L 3H
A312 Gr.TP321 3J
4) For welding ends with end coding H a "certified test report" acc. to ASTM A530 shall be provided.
Page 2
s
D
l
100
Dimensions in mm
Edition: 98-10
Standard
Welding ends
with Whitworth-pipe thread acc. to DIN2999
Part No. 2) 1) 3) 6)
H 319
3 1 9 0
Page 1 of 3
Example of Designation of a welding end short type manufactured of pipe acc. to DIN17455
Designation: with Whitworth pipe thread, nominal diameter 2“, with certificate 2.2,
material: 1.4541
Partnumber
319K7207W 2“ / 60,3 * 3,6 Welding end short type Whitw. thread
H319 / DIN17455 cert. 2.2 1.4541
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. -8. 9.
2) 1) Wallthick- 6)
Kind of Part Type Material nesses Certificate
Cd. Cd. Cd. Cd. Cd. Cd.
Welding ends short K St33-2 4) 26 0 * 3) 3.1B 1
with Whitworth- 319 long L St35.8.I 30 2.2 W
pipe thread medium M St37.0 37 2.1 B
StE240.7 38
Stainless steels
1.4541 72
Threaded pipe 5) 4 1.4571 73
acc. to DIN2440 1.4306 74
Threaded pipe 5) 5 1.4301 75
acc. to DIN2441 1.4436 76
Threaded pipe 5) 6 1.4401 77
acc. to DIN2442 1.4404 78
1) Materials:
Stainless steels acc. to DIN17457 / 17458 for certificate 3.1B
DIN17455 / 17456 for certificate 2.2
Page 2
Welding ends
manufactured of -threaded pipe acc. to DIN2440 / 2441 / 2442
-seamless steel pipe acc. to DIN1629 / 17175
-seamless or welded stainless pipe acc. to DIN 17457 / 17458 / 17455 / 17456
*)
l1
d
Pipe thread
L tapered
acc. to DIN2999
Dimensions in mm
Nom. Out- Wallthickness s for
diam. Whitw.- side Length L pipe acc. to DIN pipes acc. to DIN1629/
DN Thread diam. for type 2440 2441 2442 17457 / 17458 etc.
mm d short medium long Cd. 4 Cd. 5 Cd. 6 Cd. 7 Cd. 8 Cd. 9
8 R 1/4 13,5 30 2,35 2,90 2,90 2,3 2,9 3,6
10 R 3/8 17,2 2,35 2,90 2,90 2,3 2,9 3,6
15 R 1/2 21,3 35 50 2,65 3,25 3,25 2,6 3,2 4,0
20 R 3/4 26,9 40 2,65 3,25 3,25 2,6 3,2 4,0
25 R1 33,7 3,25 4,05 4,05 3,2 4,0 5,0
32 R 1 1/4 42,4 50 60 100 3,25 4,05 4,05 3,2 4,0 5,0
40 R 1 1/2 48,3 3,25 4,05 4,05 3,2 4,0 5,0
50 R2 60,3 55 70 3,65 4,50 4,50 3,6 4,5 5,6
65 R 2 1/2 76,1 60 80 3,65 4,50 4,50 3,6 4,5 5,6
80 R3 88,9 65 4,05 4,85 4,85 4,0 5,0 6,3
100 R4 114,3 4,50 5,40 5,40
125 R5 139,7 150 4,85 5,40 7,10
150 R6 165,1 4,85 5,40 8,00
Edition: 98-10
H 319
Page 3
Edition: 98-10
Standard
Cam Locking Couplings
acc. to DIN 2828 / PN 10 H 373
Page 1 of 4
Part number
373D7200B G 2 (INCH) CAM-LOCK.-FEMALE COUPLER STAINLESS STEEL
FORM AMKI/INTER.WHITW. H373/DIN2828 CERT:2.1
1) Materials:
Part Material
Stainless steel / 1.4571 / 1.4301 acc. to DIN 17440 / DIN 17445
Coupler / Adaptor
Aluminium / Bronze / Brass acc. to manufacturer's standard
Lever and Pin Stainless steel according to DIN 17440 / DIN 17445
Ring Stainless spring steel according to DIN 17224
Nitrile-butadiene-rubber (NBR), Shore-A-hardness 60 ±5 acc. to DIN 53505
for couplings of brass or bronze
Flat ring gasket
Fluoro caoutchouc (FPM), Shore-A-hardness 60 ±5 acc. to DIN 53505 for
couplings of stainless steel / 1.4571 / 1.4301 or aluminium
Polyurethane (PUR), Shore-A-hardness 90 ±0,5
acc. to DIN 53505 for couplings of brass or bronze
Thread sealing ring
Polytetrafluorethylene (PTFE) acc. to manufacturer's standard for
couplings of stainless steel / 1.4571 / 1.4301 or aluminium
2) Code for type of fitting. Couplings can be used in the pressure range between –800 mbar to 10 bar eff. at 65°C.
3) Female couplers and Caps for male adaptors will be delivered with flat ring gasket made of NBR.
5) DN15 ( = ½“) is not covered by DIN 2828 (dimensions for it take pattern from MIL-C-27487).
Page 2 of 4
Dimensions in mm
Weight (kg/pcs.)
4) 5) Thread Form
d18 d20 l l5 l17 l18 l20 l22
DN d6 d8 SW AVKI AVKA AVKS
max. ±0,1 ±1 min. -0,5 min. min. min.
(15) G½ R½ 25,6 32,0 33 15 17 54,0 62,0 40,0 28 0,14 0,13 0,11
20 G¾ R¾ 21,5 32,1 43 18 12 51,5 68,5 35,4 32 0,21 0,20 0,18
25 G1 R1 24,2 36,7 43 21 14 62,5 76,5 49,3 41 0,29 0,25 0,21
(32) G 1¼ R 1¼ 28,2 45,5 43 24 14 77,0 83,0 57,1 50 0,49 0,38 0,31
40 G 1½ R 1½ 36,5 53,4 43 24 18 78,5 84,5 62,7 60 0,55 0,66 0,53
50 G2 R2 46,0 63,0 50 28 20 88,5 97,5 71,0 70 0,90 0,73 0,67
(65) G 2½ R 2½ 56,6 75,8 64 33 22 99,5 113,5 75,2 85 1,34 1,20 1,03
80 G3 R3 73,3 91,5 68 36 24 104,0 119,0 78,8 100 2,10 1,70 1,85
100 G4 R4 98,2 119,5 109 42 25 117,5 161,5 80,3 130 3,30 2,60 3,33
Page 3 of 4
Dimensions in mm
Weight (kg/pcs.)
4) 5) Thread Form
d18 l l1 l2 l5 l6 l10
DN d6 d8 d4 SW AMKI AMKA AMKS
max. ±1 min. -0,5 min. min. min.
(15) G½ R½ 14 19,0 33 40,0 17 15 45,0 59,0 28 - - -
20 G¾ R¾ 18 21,5 43 45,0 12 18 51,0 76,0 32 0,21 0,21 0,21
25 G1 R1 24 24,2 43 53,0 14 21 60,0 82,0 41 0,29 0,35 0,34
(32) G 1¼ R 1¼ 32 28,2 43 59,0 14 24 69,0 88,0 50 0,49 0,49 0,55
40 G 1½ R 1½ 38 36,5 43 65,0 18 24 71,0 90,0 60 0,55 0,55 0,66
50 G2 R2 48 46,0 50 73,0 20 28 81,0 103,0 70 0,90 0,90 0,94
(65) G 2½ R 2½ 60 56,6 64 77,5 22 33 88,5 119,5 85 1,34 1,34 1,60
80 G3 R3 76 73,3 68 81,0 24 36 93,0 125,0 100 2,20 1,66 1,95
100 G4 R4 100 98,2 109 85,5 25 42 102,5 169,5 130 3,30 3,30 3,50
Page 4 of 4
Plug Cap
Form AVB Form AMB
Dimensions in mm
Part number
38412300B 1 ½ (INCH) SOCKET W. WHITWORTH THRD. STEEL
H384/DIN2986/DIN2980 CERT:2.1
1) Materials:
Steel acc. to DIN2980
St 37.0 acc. to DIN1629 (alternative St35.8.I acc. to DIN17175)
C22.8 acc. to DIN17243
Stainless steels acc. to DIN17440 (DIN EN10088)
5) Threaded engagements can be taken from DIN2999-1 (useable thread length l1).
8) Code for length only for barrel nipple (see page 4).
9) Steel fittings acc. to DIN2980 may be substituted by steel fittings DIN EN10241.
9) Certificate acc. to EN10204.
Page 2
d2
d1
Dimensions in mm
Outside
Nominal Pipe Length
diameter Weight
diameter thread l
d2 kg/piece
DN d1 min.
min.
6 Rp 1/8 14 17 0,014
8 Rp 1/4 18,5 25 0,022
10 Rp 3/8 21,3 26 0,036
15 Rp 1/2 26,4 34 0,071
20 Rp 3/4 31,8 36 0,104
25 Rp 1 39,5 43 0,168
32 Rp 1 1/4 48,3 48 0,254
40 Rp 1 1/2 54,5 48 0,327
50 Rp 2 66,3 56 0,527
65 Rp 2 1/2 82 65 0,792
80 Rp 3 95 71 1,11
100 Rp 4 122 83 1,76
125 Rp 5 147 92 2,46
150 Rp 6 174 92 3,44
Edition: 2003-04
H 384
Page 3
Reduced socket
acc. to DIN2988
l
d2
d1
Outside diameter
Designation Nominal diameter Length *) Weight
(Thread Rp) DN d1 d2 l kg/piece
min. min.
1/4 1/8 8 6 17,5 14,5 27 0,04
3/8 1/4 10 8 21,5 17,5 30 0,05
1/2 3/8 15 10 27 21,5 36 0,07
1/2 15 27 0,12
3/4 20 33,5 39
3/8 10 21,5 0,11
3/4 20 33,5 0,16
1 25 40,5 45
1/2 15 27 0,15
1 25 40,5 0,24
1 1/4 3/4 32 20 50 33,5 50 0,23
1/2 15 27 0,23
1 1/4 32 50 0,32
1 1/2 1 40 25 57 40,5 55 0,30
3/4 20 33,5 0,28
1 1/2 40 57 0,55
2 1 1/4 50 32 70 50 65 0,52
1 25 40,5 0,49
2 50 70 0,82
2 1/2 1 1/2 65 40 86 57 74 0,79
1 1/4 32 50 0,76
2 1/2 65 86 1,19
3 2 80 50 100 70 80 1,16
1 1/2 40 57 1,12
3 80 100 2,20
4 2 1/2 100 65 126 86 94 2,12
2 50 70 2,08
4 100 126 3,40
5 3 125 80 152 100 110 3,34
2 1/2 65 86 3,27
5 125 152 4,55
6 4 150 100 180 126 120 4,48
3 80 100 4,30
*) Dimension l corresponds with DIN2950, Form M2 (Fig. 240).
Footnotes see page 1.
Edition: 2003-04
H 384
Page 4
l1 l2
Dimensions in mm
Thread 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6
Nominal diameter 6 8 10 15 20 25 32 40 50 65 80 100 125 150
Nipple
Length l1 16 18 22 25 30 35 38 38 45 55 60 70 85 100
Weight kg/piece 0,006 0,011 0,015 0,025 0,037 0,085 0,11 0,116 0,183 0,44 0,56 0,86 1,48 2,23
Barrel nipple
Length- Length
Weight kg/piece *)
code 8) l2
4 40 0,012 0,024 0,028 Sizes within this section can not be
6 60 0,02 0,036 0,044 0,07 0,092 0,13 delivered on technical reasons.
8 80 0,028 0,048 0,06 0,093 0,125 0,179 0,224 0,286
10 100 0,036 0,061 0,076 0,116 0,157 0,227 0,287 0,36 0,46 0,69
12 120 0,043 0,073 0,092 0,14 0,19 0,28 0,35 0,44 0,57 0,82 1,08
15 150 0,055 0,091 0,117 0,20 0,24 0,35 0,45 0,56 0,72 1,02 1,33 1,63 2,35 2,85
18 180 0,067 0,11 0,14 0,21 0,29 0,42 0,54 0,67 0,88 1,22 1,59 1,98 2,84 3,45
20 200 0,075 0,12 0,16 0,23 0,32 0,47 0,60 0,75 0,98 1,36 1,75 2,21 3,15 3,75
25 250 0,095 0,15 0,20 0,29 0,40 0,59 0,76 0,84 1,24 1,69 2,17 2,78 3,95 4,75
30 300 0,12 0,18 0,24 0,36 0,48 0,71 0,92 1,14 1,50 2,02 2,59 3,36 4,75 5,80
*) Weight for standard type (Steelpipe acc. to DIN2440)
Edition: 2003-04
H 384
Page 5
Whitworth-pipe thread
acc. to DIN2999-1 5)
External thread acc. to
l2 DIN ISO228-1/ class B
l1
Dimensions in mm
Usable
Nominal
Designation Length thread length Weight *)
diameter
(=Thread) l1 l2 kg/piece
DN
min.
1/4 8 80 35 0,095
3/8 10 100 40 0,167
1/2 15 100 50 0,235
3/4 20 120 55 0,375
1 25 140 60 0,636
1 1/4 32 150 70 0,912
1 1/2 40 150 70 1,08
2 50 170 81 1,80
2 1/2 65 180 92 3,00
3 80 200 101 3,75
4 100 250 120 7,60
*) Weight with socket and nut.
Edition: 2003-04
H 384
Page 6
Bushing
acc. to DIN2990
SW
l2
Dimensions in mm
Edition: 2003-04
H 384
Page 7
Hexagonal nipple
acc. to DIN2990
SW
l1
Dimensions in mm
Nominal Width
Designation Length Weight
diameter over flats
(=Thread R) l1 kg/piece
DN SW
1/8 6 22 12 0,011
¼ 8 24 14 0,018
3/8 10 28 19 0,037
½ 15 34 22 0,055
¾ 20 40 30 0,087
1 25 46 36 0,157
1¼ 32 52 46 0,267
1½ 40 54 50 0,355
2 50 62 65 0,51
2½ 65 70 80 0,85
3 80 78 90 1,22
4 100 94 120 2,25
Edition: 2003-04
Standard
Threaded Steel Pipe Fittings
Plugs, Caps / DIN2991 H 385
Hexagon Socket Pipe Plugs / DIN906
Page 1 of 3
Part number
38527700W 2 (INCH) CAP W.WHITWORTH THREAD 1.4401
H385/DIN2991/DIN2980/DIN17440 CERT:2.2
1) Materials:
Steel acc. to DIN2980
St37.0 acc. to DIN1629 (alternative St35.8.I acc. to DIN17175)
C22.8 acc. to DIN17243
Brass (CuZn40Pb2=Ms58) acc. to DIN17660
Stainless steels acc. to DIN17440 (DIN EN10088)
4) Threaded engagements can be taken from DIN2999-1 (useable thread length l1).
Page 2
s
l1 d
l2
Thread: Whitworth-pipe thread acc. to DIN2999-1 4)
Dimensions in mm
Plug Cap
Nominal-
Designation Width over
diameter Weight Weight
(=Thread) l1 flats l2 *) d *)
DN kg/piece kg/piece
s
1/8 6 20 7 0,01 13 14,5 0,02
1/4 8 21 8 0,02 15 17,5 0,03
3/8 10 23 10 0,03 17 21,5 0,04
1/2 15 28 12 0,05 19 27 0,07
3/4 20 33 14 0,08 22 33,5 0,12
1 25 35 17 0,11 24 40,5 0,14
1 1/4 32 37 19 0,19 27 50 0,23
1 1/2 40 37 22 0,25 27 57 0,28
2 50 42 24 0,34 32 70 0,46
2 1/2 65 47 30 0,70 35 86 0,81
3 80 52 32 1,10 38 100 1,08
4 100 63 41 2,15 45 126 2,00
*) min. dimension
Edition: 2003-04
H 385
Page 3
45°
e
df
+0,5
45° s d f = e (actual dimension) -0
t
Dimensions in mm
Size Nominal
T W Weight
(=Thread R) diameter b e s
min. min. kg/1000 pcs.
d *) DN
1/8 6 8 5,9 5 4 2 3,38
1/4 8 10 8,1 7 5 2 7,00
3/8 10 10 9,4 8 5 2 12,2
1/2 15 10 11,7 10 5 2 19,0
3/4 20 12 14 12 6 2 40,2
1 25 12 19,8 17 6 2 57,5
1 1/4 32 18 25,6 22 11,5 3 135
1 1/2 40 20 27,9 24 11,5 4 214
*) Whitworth-Pipe Thread acc. to DIN3858, tolerance field class 2 (short pattern)
Edition: 2003-04
Steel fittings with thread Standard
Unions / DIN2993
2) 1) 5) 8)
H 386
Part No. 3 8 6 0
Page 1 of 3
Example of Designation of an union with flat sealing and female/male thread, size 1", with certificate 2.2
Designation: material: 1.4541
Partnumber
38637200W 1" Union flat female / male
H386 / DIN2993 cert. 2.2 1.4541
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. - 8. 9.
2) 1) 3) Wallthick- 8)
Kind of Part Type Material ness Certificate
Cd. Cd. Cd. Cd. Cd. Cd.
6) female / female 1 For working pressure 0 0 3.1B 1
Steelfittings 386 flat sealing up to 50 bar V 7) 2.2 W
Unions female / female 2 Steel (St) 23 F 5) 2.1 B
tapered sealing Steel (St) with Klingersil 28
female / male 3 C4400-flat sealing ring
flat sealing C22.8 32
female / male 4 St37.0 37
tapered sealing Brass 85
Stainless steel
Stainless steel 70
1.4541 / with Klingersil 71
C4400-flat sealing ring
Max. allowable working pressure acc. to DIN2980: 1.4541 72
1.4571 73
Working pressure
1.4306 74
Nominal at temperatures Hydrostatic
pressure up to 120°C up to 300°C test 1.4301 75
PN bar eff bar eff 1.4436 76
1.4401 77
32 32 25 50
1.4404 78
50 50 40 75
1.4571 / with Klingersil 79
C4400-flat sealing ring
1) Materials:
Stainless steels acc. to DIN17440 / Steel acc.to DIN2980
St37.0 acc.to DIN1629 (alternative St35.8.I acc.to DIN17175)
Brass (CuZn40Pb2=Ms58) acc.to DIN17660 / C22.8 acc.to VdTÜV-Wstbl. 350
2) Code for type of fitting
Type: female / female, flat and tapered sealing acc.to DIN2993.
Type: female / male, flat and tapered sealing takes pattern from DIN2993.
3) Temperature application limits:
Steel (St) up to 120°C, St37.0 up to 300°C, Stainless steels up to 300°C
C22.8 up to 300°C
Brass up to 120°C
Klingersil C4400 up to 150°C
4) Threaded engagements can be taken from DIN2999, part 1 (useable thread length l1).
Page 2
l l
m m
SW SW
Nominal pressure: PN 50
Test pressure: 75 bar eff
Thread: Whitworth-pipe thread acc. to DIN2999 4)
Dimensions in mm
Appropriate sealing ring *)
Size Nominal l SW m Weight
(=thread) diameter Inside Outside thick- kg / piece
DN diam. diam. ness
1/8 6 37 27 15 11 18 0,08
1/4 8 40 27 15 13 20 0,08
3/8 10 46 32 16 17 24 0,11
1/2 15 54 41 18 21 30 0,21
3/4 20 60 50 20 27 38 2 0,37
1 25 66 55 22 32 44 0,42
1 1/4 32 72 70 24 42 55 0,76
1 1/2 40 81 75 25 46 62 0,90
2 50 91 90 27 60 78 1,40
2 1/2 65 102 110 30 75 97 2,37
3 80 107 130 31 88 110 3 3,35
4 100 118 155 34 113 135 4,30
*) Sealing rings for flat sealing unions may be ordered separately by specification of service condition.
Material code for complete union incl. sealing ring see page 1
**) Single parts of unions of one manufacturer shall be interchangeable for the same material and
the same part no. (e.g. 386...F0.).
Edition: 98-10
H 386
Page 3
l l
m m
SW SW
Nominal pressure: PN 50
Test pressure: 75 bar eff
Thread: Whitworth-pipe thread acc. to DIN2999 4)
Dimensions in mm
Appropriate sealing ring *)
Size Nominal l SW m Weight
(=thread) diameter Inside Outside thick- kg / piece
mm diam. diam. ness
1/4 8 47 27 15 13 20 0,08
3/8 10 53 32 16 17 24 0,12
1/2 15 62 41 18 21 30 0,19
3/4 20 66 50 20 27 38 2 0,31
1 25 74 55 22 32 44 0,42
1 1/4 32 81 70 24 42 55 0,71
1 1/2 40 84 75 25 46 62 0,89
2 50 87 90 27 60 78 1,28
*) Sealing rings for flat sealing unions may be ordered separately by specification of service condition.
Material code for complete union incl. sealing ring see page 1
Edition: 98-10
Standard
Welding Neck Flange
PN16 / DIN2633 H 413
Page 1 of 2
Example of Designation of a welding neck flange with raised face form C, DN400 for pipe outside diameter
Designation: d1 = 406,4 mm with matching wallthickness s1 = 6,3 mm, with certificate 3.1B, material: RSt37-2
Partnumber
413131H01 406,4 x 6,3 WELDING NECK FLANGE/C PN16 RST37-2
H413/DIN2633 CERT:3.1B
Partnumbering Code
Position of Part No.
1. - 2 3. 4. 5. - 6. 7.- 8. 9.
Nominal 4) 1) Wallthick- 11)
Kind of Part pressure Flange facing Material ness Certificate
Cd. PN Cd. Cd. Cd. Cd. Cd. Cd.
16 3 Form E 0 RSt37-2 31 5) 3.1B 1
Welding Neck 41 Form C 1 C22.8 32 * 0 2.2 W
Flange Tongue Form F 15Mo3 41 5) 6) 10)
2 A
DIN2512 13CrMo44 42 * M 3.1A
Groove Form N 10CrMo9.10 46 5) 7) 10)
3 C
DIN2512 12CrMo19.5V 47 * S 3.1C
Male Form V13 10Ni14 52 5) 8) 10)
5 D
DIN2513 1.4878 61 * F 3.1B
Female Form R13
6
DIN2513 TStE285 TB
Form D D
TStE355 TC
Stainless steels 2) With corrosion test
1.4541 72 acc. to ISO 3651/I or
1.4571 73 ASTM A262 practice C
1) Materials: 1.4306 74 (HUEY-TEST)
Stainless steels acc. to DIN17440 (DIN EN10222-5) 1.4301 75 3) With corrosion test
1.4462 / 1.4539 acc. to SEW 400 (DIN EN10222-5) 1.4436 76 acc. to ISO 3651/II or
RSt37-2 acc. to DIN17100 (DIN EN10025) 1.4401 77 ASTM A262 practice E
C22.8 / 15Mo3 / 13CrMo44 / 10CrMo9.10 acc.to DIN17243 1.4404 78 or DIN50914
1.4878 acc. to SEW 470 1.4435 79 (STRAUSS-TEST)
10Ni14 acc. to DIN17280 1.4306/HUEY-tested NH 2)
2CrMo19.5V (annealed) acc. to VdTÜV-Wstbl. 007/3 1.4306/HUEY/£0,25Mo NM 2)
TStE285 / TStE355 acc. to DIN17103 1.4541/STRAUSS-Test NS 3)
1.4462 NJ
4) Flange facings acc. to DIN2526. 1.4439 NK
1.4539 NL
5) Wallthickness code acc. to VAI-Std. H0010.
Matching wallthickness s1 </> DIN see VAI-Std. H110, H120 or piping specifications.
Welding end shall be beveled to pipe inside diameter at a slope ≤ 10º.
Flange bore shall not fall below the pipe inside diameter by more than 6 mm.
6) Welding neck flange for measuring shall be turned out to the inside diameter of mating pipe.
(e.g.orifice plates see DIN19206).
7) Nut spot face for stud bolts DIN2510. (Code S before flange facing form e.g. SC).
8) Corresponds with code M (welding neck flange for measuring), however additionally with
nut spot face for stud bolts DIN2510.
10) Additional requirements to materials acc.to appropriate AD2000-Merkblätter. Quality certificate as specified, as far as
AD2000-Merkblätter do not allow / demand other certificates for certain material testings or steps of manufacture.
Page 2
z
= Rz = 160 d1
s s1 Welding bevel for s1 acc. to DIN2559:
turned
y z up to 3 mm: Identification No. 1
= Rz = 160 from 3 to 16 mm: Identification No. 22
h2 above 16 mm: Identification No. 3
d2
7) 8)
r z
h1
Matching of inside diameter at a
slope ≤ 10° 5)
b
f
Possible facings:
d3 y Form C (Rz = 160)
Form D (Rz = 40)
d4 Form E (Rz = 16)
Form F (Rz = 40)
k Form N (Rz = 40)
Form V13 und R13
D
Dimensions in mm
Pipe Flange Neck Facing Bolts Weight
dimensions 9) Num
-
DN d1 D b k h1 d3 s s1 r »h2 d4 f ber Thrd. d2 kg/piece
10 17,2 90 14 60 35 28 1,8 4 6 40 2 4 M12 14 0,58
15 21,3 95 14 65 35 32 2 4 6 45 2 4 M12 14 0,65
20 26,9 105 16 75 38 40 2,3 4 6 58 2 4 M12 14 0,95
25 33,7 115 16 85 38 45 2,6 4 6 68 2 4 M12 14 1,14
32 42,4 140 16 100 40 56 2,6 6 6 78 2 4 M16 18 1,69
40 48,3 150 16 110 42 64 2,6 6 7 88 3 4 M16 18 1,86
50 60,3 165 18 125 45 75 2,9 5) 8 8 102 3 4 M16 18 2,53
65 76,1 185 18 145 45 90 2,9 6 10 122 3 4 M16 18 3,06
80 88,9 200 20 160 50 105 3,2 8 10 138 3 8 M16 18 3,70
100 114,3 220 20 180 52 131 3,6 8 12 158 3 8 M16 18 4,62
125 139,7 250 22 210 55 156 4 8 12 188 3 8 M16 18 6,30
150 168,3 285 22 240 55 184 4,5 10 12 212 3 8 M20 22 7,75
(175) 193,7 315 24 270 60 210 5,4 10 12 242 3 8 M20 22 9,85
200 219,1 340 24 295 62 235 5,9 10 16 268 3 12 M20 22 11,0
250 273 405 26 355 70 292 6,3 12 16 320 3 12 M24 26 15,6
300 323,9 460 28 410 78 344 7,1 12 16 378 4 12 M24 26 22,0
350 355,6 520 30 470 82 390 8 12 16 438 4 16 M24 26 31,2
400 406,4 580 32 525 85 445 8 12 16 490 4 16 M27 30 39,3
500 508 715 34 650 90 548 8 12 16 610 4 20 M30 33 61,0
600 610 840 36 770 95 652 8,8 12 18 725 5 20 M33 36 75,4
700 711 910 36 840 100 755 8,8 12 18 795 5 24 M33 36 77,0
800 813 1025 38 950 105 855 10 12 20 900 5 24 M36 39 101
900 914 1125 40 1050 110 955 10 12 20 1000 5 28 M36 39 122
1000 1016 1255 42 1170 120 1058 10 16 22 1115 5 28 M39 42 162
1200 1220 1485 48 1390 130 1262 12,5 16 30 1330 5 32 M45 48 243
1400 1420 1685 52 1590 145 1465 14,2 16 30 1530 5 36 M45 48 323
1600 1620 1930 58 1820 160 1668 16 16 35 1750 5 40 M52 56 479
1800 1820 2130 62 2020 170 1870 17,5 16 35 1950 5 44 M52 56 599
2000 2020 2345 66 2230 180 2072 20 16 40 2150 5 48 M56 62 719
Bracketed nominal diameter shall be avoided.
Further footnotes see page 1.
Edition: 2003-04
Standard
Blind Flanges
PN6–40 / DIN2527 / DIN28122 H 445
Page 1 of 5
Example of Designation of a blind flange with raised face form C, nominal diameter DN100,
Designation: nominal pressure PN40, with certificate 3.1B, material: C22.8
Partnumber:
445132001 100(MM) BLIND FLANGE/C PN40 C22.8
H445/DIN2527 CERT: 3.1B
Patnumbering Code
Position of Part No.
1. – 2. 3. 4. 5. - 6. 7. - 8. 9.
Certifi-
Kind of Part PN 5) Flange facing 4) Material 1) Specials cate 10)
Cd. Cd. Cd. Cd. Cd. Cd. Cd.
6 1 Form E 0 USt37-2 24 0 0 7) 3.1B 1
Blind Flange 10 2 Form C 1 USt37-2 galvanized 28 1 8) 2.2 W
DIN2527 / 44 16 3 Tongue form F / RSt37-2 31 2 8) 3.1A 9) A
2
DIN28122 25 4 DIN2512 C22.8 / HII 32 N 7) 3.1C 9) C
40 5 Groove form N / St37-2 galvanized 38 R 7) 3.1B 9) D
3
DIN2512 15Mo3 41
Male form V13 / 13CrMo44 42
5
DIN2513 10CrMo9.10 46
Female form R13 / 12CrMo19.5V 47
6
DIN2513 10Ni14 52
Form B B 1.4878 61
Form D D
Tongue form FA / TStE255 TA
F
DIN2512 TStE285 TB
Groove form NA / TStE355 TC
N
DIN2512
Form T T
Stainless steels
1.4541 72
1.4571 73
1.4306 74
1.4301 75
Footnotes see page 2. 1.4436 76
1.4401 77
1.4404 78
1.4435 79
1.4306/HUEY-tested NH 2)
1.4306/HUEY/£0.25Mo NM 2)
1.4541/STRAUSS-tested NS 3)
1.4462 NJ
1.4439 NK
1.4539 NL
Page 2
1) Materials:
Stainless steels acc. to DIN17440
USt37-2 / St37-2 / RSt37-2 acc. to DIN17100 (EN10025)
C22.8 / 15Mo3 / 13CrMo44 / 10CrMo9.10 acc. to DIN17243
10Ni14 acc. to DIN17280
TStE255 acc. to DIN17102 and TStE285 / TStE355 acc. to DIN17102 / DIN17103
12CrMo19.5V (annealed) acc. to VdTÜV-Wstbl. 007/3
1.4878 acc. to SEW 470
1.4462 / 1.4539 acc. to DIN EN10088
Galvanizing acc. to DIN2444
2) With corrosion test acc. to IS0 3651/I or ASTM A262 practice C (HUEY-test).
3) With corrosion test acc. to IS0 3651/II or ASTM A262 practice E (STRAUSS-test).
6) If blind flanges with handles are used, handles have to be ordered separately.
Plated blind flanges PN10-40 acc. to DIN28122 only standardized for DN125-500.
Edition: 2003-08
H 445
Page 3
7) d2 d2
7)
60
b
b
Rz=160
~2
Rz=160
k d9
D k
f1
d4 acc. to DIN28122
k
Detail construction of plating
D see DIN28122
Edition: 2003-08
H 445
Page 4
Edition: 2003-08
H 445
Page 5
Edition: 2003-08
Standard
Example of Designation of a welding on flange Type A2 complete for equipment connection of size 100 for mating
Designation: outside diameter 139,7 mm and wall thickness s1 = 16 mm, nominal pressure PN250, with inspection
certificate 3.1B, material: 1.4541 for welding nozzle, steel nickel plated for flange, NBR for O-ring
Part number
4698ZPS91 NG 100/139,7 * 16,0 WELDING-ON-FLANG.TYPE A2 1.4541/ST.NI-PL/NBR
EQUIPMENT CONNECTION PN250 H469 CERT:3.1B
Page 2
Weight table:
Weight incl. bolts kg / piece
Pipe Equipment connection with Flange connection complete
size Welding-On-Flange Type A2 Type A1 / A2
DN PN160 PN250 PN315 PN400 PN160 PN250 PN315 PN400
40 2,3 2,3 3,2 4,2 4,2 6,3
50 3,2 3,2 5,6 6,1 6,1 10,8
65 5,4 5,5 9,5 10,3 10,5 18,4
80 9,0 9,2 15,2 17,4 17,8 30,1
100 17,5 18,2 20,5 33,7 35,0 40,8
125 26,3 28,5 29,3 51,0 54,6 57,2
150 45,0 55,1 84,7 109,2
200 52,0 102,7
Materials:
Hexagon Thru-/
Code Flange Welding nozzle Hexagon Blind Bolts O-Ring
EN 24014 or 24017
30 8) Steel nickel plated St35.8.III (C22.8) 8.8 nickel plated -
31 8) Steel nickel plated St52.4 8.8 nickel plated -
32 Steel St52.4 8.8 -
33 Steel St35.8.III (C22.8) 8.8 - Numeric material
36 Steel nickel plated austenitic steel 1.4541 8.8 nickel plated - codes
38 8) Steel nickel plated austenitic steel 1.4571 8.8 nickel plated - only applicable for
72 1.4541 austenitic steel 1.4541 8.8 nickel plated - flange type codes
73 1.4571 austenitic steel 1.4571 8.8 nickel plated - 5, 9 , C, E
NF 1.4571 austenitic steel 1.4571 8.8 nickel plated FPM
NN 1.4571 austenitic steel 1.4571 8.8 nickel plated NBR
NP 1.4541 austenitic steel 1.4541 8.8 nickel plated NBR
NV 1.4541 austenitic steel 1.4541 8.8 nickel plated FPM
SP Steel St35.8.III 8.8 NBR
SV Steel St35.8.III 8.8 FPM
SW Steel St52.4 8.8 NBR
SX Steel St52.4 8.8 FPM
ZB 8) Steel nickel plated St35.8.III 8.8 nickel plated NBR
ZC 8) Steel nickel plated St52.4 8.8 nickel plated NBR
ZD 8) Steel nickel plated St35.8.III 8.8 nickel plated FPM
ZE 8) Steel nickel plated St52.4 8.8 nickel plated FPM
ZF 8) Steel nickel plated austenitic steel 1.4571 8.8 nickel plated FPM
ZN 8) Steel nickel plated austenitic steel 1.4571 8.8 nickel plated NBR
ZP Steel nickel plated austenitic steel 1.4541 8.8 nickel plated NBR
ZV Steel nickel plated austenitic steel 1.4541 8.8 nickel plated FPM
Footnotes see page 1.
Edition: 2005-12
H 469
Page 3
Welding-On-Flange
L
l
h h
(s1 ) *)
AD
d
s
c 30°
£ DN125 - 4 mm
2mm
O-Ring-Gasket ³ DN150 - 5 mm
b acc. to VAI-Std. H699
D
A
Dimensions in mm
Pipe Wall thickness s for
Pipe outside nominal pressure PN Flange A D L l h d
size diameter size
DN AD 160 250 315 400 s1 NG
40 48,3 6,3 8,0 8,8 32 90 - 130 68 29 60
50 60,3 8,0 10,0 10,0 40 100 - 153 80 38 76
65 76,1 10,0 12,5 12,5 *) 50 120 - 190 98 44 92
80 88,9 12,5 14,2 14,2 65 150 - 210 109 48 110
100 114,3 14,2 17,5 20,0 80 180 - 262 135 59 135
125 139,7 17,5 22,2 36,0 100 - 245 292 150 69 168
150 168,3 22,2 28,0 125 - 300 372 190 79 205
200 219,1 32,0 150 - 355 390 200 89 245
Edition: 2005-12
H 469
Page 4
Blind flange
with or without thread hole DIN3852/part 2 (Whitworth Pipe Thread)
Type B1 Type B2
h h
*) *)
a1 a1
d4
d4
K
d1
d1
A
K
d
d
A
c
c
2mm O-Ring-Gasket 4mm
acc. to VAI-Std. H699
Dimensions in mm
Thread hole Weight kg / piece
Pipe
DIN3852
size
B1 B2
d1 d4 a1
DN (mm) (mm) PN160 PN250 PN315 PN400 PN160 PN250 PN315 PN400
40 R 1/2" 29 2,5 1,84
50 R 1" 42 2,5 2,98
65 R 1" 42 2,5 4,97
80 R 1 1/2" 58 2,5 8,48
100 R 1 1/2" 58 2,5 15,00
Edition: 2005-12
Standard
SAE - Flanges
acc. to SAE J518 for DIN-application H 488
Page 1 of 8
Example of Designation of a SAE-flange class 3000, for equipment connection Type SA2, welding nozzle
Designation: outside diameter114,3 mm, mating wall thickness 7,1 mm, with inspection certificate 3.1B,
material: nozzle 1.4571, flange steel nickel plated yield strength ³ 414 MPa (ReH ³ 414 MPa), NBR - O-ring
Part number
487PZN901 4" / 114,3 * 7,1 SAE-FLANGE EQUIPM.CONNEC 1.4571/ST.NI-PL./NBR
TYPE SA2 CLASS 3000 H488/SAE J518 CERT:3.1B
Page 2
Materials:
Hexagonal-/ To be applied
Code Flange Welding nozzle Hex. recess bolts
and hexagonal
O-Ring for following -
flange type codes
nuts
30 Steel nickel plated ReH ³ 414 MPa 6) St52.4 8.8 nickel plated - 3, S, U
31 Steel nickel plated ReH ³ 331 MPa 7) St52.4 8.8 nickel plated - 3, S, U
34 Steel ReH ³ 414 MPa 6) C22.8 or St52.4 8.8 - 1, 2, 3, J, S, T, U
35 Steel ReH ³ 331 MPa 7) St35.8.III 8.8 - 1, 2, 3, J, S, T, U
36 Steel nickel plated ReH ³ 414 MPa 6) 1.4541 8.8 nickel plated - 1, 2, 3, S, T, U
37 Steel nickel plated ReH ³ 331 MPa 7) 1.4541 8.8 nickel plated - 1, 2, 3, S, T
38 Steel nickel plated ReH ³ 414 MPa 6) 1.4571 8.8 nickel plated - 3, S, U
39 Steel nickel plated ReH ³ 331 MPa 7) 1.4571 8.8 nickel plated - 3, S, U
72 Stainless steel 1.4541 1.4541 8.8 - 1, 2, 3, J, S, T, U
73 Stainless steel 1.4571 1.4571 8.8 - 1, 2, 3, J, S, T, U
NF Stainless steel / 1.4571 1.4571 8.8 nickel plated FPM (Viton) G, K, P, Q
NN Stainless steel / 1.4571 1.4571 8.8 nickel plated NBR (Perbunan) G, K, P, Q
NP Stainless steel / 1.4541 1.4541 8.8 nickel plated NBR (Perbunan) G, K, P, Q
NV Stainless steel / 1.4541 1.4541 8.8 nickel plated FPM (Viton) G, K, P, Q
SP Steel ReH ³ 414 MPa 6) C22.8 or St52.4 8.8 NBR (Perbunan) G, K, P, Q
SR Steel ReH ³ 331 MPa 7) St35.8.III 8.8 NBR (Perbunan) G, K, P, Q
SV Steel ReH ³ 414 MPa 6) C22.8 or St52.4 8.8 FPM (Viton) G, K, P, Q
SY Steel ReH ³ 331 MPa 7) St35.8.III 8.8 FPM (Viton) G, K, P, Q
ZB Steel nickel plated ReH ³ 414 MPa 6) St52.4 8.8 nickel plated NBR (Perbunan) P, Q
ZC Steel nickel plated ReH ³ 331 MPa 7) St52.4 8.8 nickel plated NBR (Perbunan) P, Q
ZD Steel nickel plated ReH ³ 414 MPa 6) St52.4 8.8 nickel plated FPM (Viton) P, Q
ZE Steel nickel plated ReH ³ 331 MPa 7) St52.4 8.8 nickel plated FPM (Viton) P, Q
ZF Steel nickel plated ReH ³ 414 MPa 6) 1.4571 8.8 nickel plated FPM (Viton) P, Q
ZG Steel nickel plated ReH ³ 331 MPa 7) 1.4571 8.8 nickel plated FPM (Viton) P, Q
ZN Steel nickel plated ReH ³ 414 MPa 6) 1.4571 8.8 nickel plated NBR (Perbunan) P, Q
ZM Steel nickel plated ReH ³ 331 MPa 7) 1.4571 8.8 nickel plated NBR (Perbunan) P, Q
ZP Steel nickel plated ReH ³ 414 MPa 6) 1.4541 8.8 nickel plated NBR (Perbunan) G, P, Q
ZR Steel nickel plated ReH ³ 331 MPa 7) 1.4541 8.8 nickel plated NBR (Perbunan) G, P, Q
ZV Steel nickel plated ReH ³ 414 MPa 6) 1.4541 8.8 nickel plated FPM (Viton) G, P, Q
ZY Steel nickel plated ReH ³ 331 MPa 7) 1.4541 8.8 nickel plated FPM (Viton) G, P, Q
Edition: 2005-12
H 488
Page 3
Equipment connection
2 1 pair 1 1 5
with split flange
Equipment connection
P 1 1 1 1 7
Type SA2 with groove
Edition: 2005-12
H 488
Page 4
Port Dimensions for Hydraulic Flanged Tube, Pipe and Hose Connections
4 - Bolt Split Flange Type
CC DD
DG Surface Texture on
Face of Port 3µm
BB
Y A
O
Q
W
X
GG
EE
FF Min pad width
Recommended pad width
Class 3000 (Standard pressure series) Dimensions in mm
Flange
Nom. Dash A O FF Q GG S W X Y BB CC DD EE DG
diam. Size + 0,0 Nom. ± 0,25 ± 0,25
DN - 1,5 dim. Rad. Rad. min. min. min. min.
1/2" -8 12,7 54 46 38,10 17,48 8 19 9 23 56 52 49 33 33,18
3/4" -12 19,1 65 52 47,63 22,23 9 24 11 26 68 61 55 41 42,25
1" -16 25,4 70 59 52,37 26,19 9 26 13 29 72 67 61 48 48,24
1 1/4" -20 31,8 79 73 58,72 30,18 10 29 15 37 82 78 75 54 54,11
1 1/2" -24 38,1 94 83 69,85 35,71 12 35 18 41 96 90 85 64 64,96
2" -32 50,8 102 97 77,77 42,88 12 39 21 49 104 102 99 76 75,31
2 1/2" -40 63,5 114 109 88,90 50,80 13 44 25 54 117 114 111 89 88,90
3" -48 76,2 135 131 106,38 61,93 14 53 31 66 137 136 133 106 106,43
(3 1/2") -56 88,9 152 140 120,65 69,85 16 60 35 70 155 148 142 119 -
4" -64 101,6 162 152 130,18 77,77 16 65 39 76 164 160 155 132 134,98
5" -80 127,0 184 181 152,40 92,08 16 76 46 90 186 185 183 151 161,40
Edition: 2005-12
H 488
Page 5
0,5R max.
W
D
O
J
D and J shall be concentric
within 0,25 mm
R F
P U
Face of Port on
Adapter Plate,
Pump etc.
Flanged Head
Fitting
0,76 - 0,25
0,25 - 0,00
0,76R max.
B
A
G
C
H
E 0,76 - 0,38R
Edition: 2005-12
H 488
Page 6
Edition: 2005-12
H 488
Page 7
FF U
GG F 3
Flange
with welding nozzle, flat
S Type SA 1
W
Y
D
Q
J
T
Z1
Flange connection complete
Z
with welding nozzles
O-Ring Seal
Equipment Connection P see VAI-Std. H699 Type SA 1 / SA 2 Q
with welding nozzle
Type SA 2
s1
s1
Da
Da
Welding nozzle
single
K Type SA 1,flat
Welding nozzle single J
with groove Z2
Type SA 2 l L
Dimensions Q, W, FF, GG, S and Y see page 4 // Dimensions O, D, J, F, U, Z and Z1 see page 6
Further footnotes see page 1
Edition: 2005-12
H 488
Page 8
Flange connection Type SF3 with thread holes Flange connection with welding nozzle flat
with welding nozzle flat (type SA1) and split Type SA1 with hexagon thru bolts
flange with hexagon bolts U
G T
O-Ring Seal
see VAI-Std. H699
N1 N1
Dimensions in mm
Class 3000 (Standard pressure series) Class 6000 (High pressure series)
Edition: 2005-12
Standard
Hexagon Bolts EN24014
with Hexagon Nut EN24032 H 572
Page 1 of 3
Example of Designation of a hexagon bolt with thread d = M10, length L = 70 mm with hexagon nut EN24032,
Designation : with certificate 2.2, material: A2-70 / A2-70
Partnumber
57227800W M10x70 HEXAGON BOLT WITH NUT A2-70/A2-70
METRIC H572/EN24014/EN24032 CERT:2.2
Partnumbering Code
8) Hexagon bolts EN24014 with nut EN24032 (both product class A or B )supersede
hexagon bolts DIN931 with nut DIN934.
9) Strength category A2-70 / A4-70 preferably only up to M20, above that use A2-50 / A4-50.
For d ³ M42 the stainless material has to be stipulated.
Page 2
m c Maximum
Detail X Chamfered end underhead fillet
(tapered top)
r
d
e
u 6)
ls
da
dg
lg (b) S 0,1
k l Reference line
for dw
Dimensions in mm
d M5 M6 M8 M10 M12 M16 M20 M24 (M27) M30 (M33) M36 (M39) M42 (M45) M48 (M52) M56
pitch P 0,8 1 1,25 1,5 1,75 2 2,5 3 3 3,5 3,5 4 4 4,5 4,5 5 5 5,5
3) 16 18 22 26 30 38 46 54 60 66 - - - - - - - -
b 4) - - - - - 44 52 60 66 72 78 84 90 96 102 108 116 -
5) - - - - - - - 73 79 85 91 97 103 109 115 121 129 137
da max. 5,7 6,8 9,2 11,2 13,7 17,7 22,4 26,4 30,4 33,4 36,4 39,4 42,4 45,6 48,6 52,6 56,6 63
e min.
Product-
class A 8,79 11,05 14,38 17,77 20,03 26,75 33,53 39,98 - - - - - - - - - -
class B - - - - - 26,17 32,95 39,55 45,20 50,85 55,37 60,79 66,44 71,3 76,95 82,6 88,25 93,56
k
Nominal 3,5 4 5,3 6,4 7,5 10 12,5 15 17 18,7 21 22,5 25 26 28 30 33 35
dimension
dw min.
Product-
class A 6,88 8,88 11,63 14,63 16,63 22,49 28,19 33,61 - - - - - - - - - -
class B - - - - - 22 27,7 33,25 38 42,75 46,55 51,11 55,86 59,95 64,7 69,45 74,2 78,66
r min. 0,2 0,25 0,4 0,4 0,6 0,6 0,8 0,8 1 1 1 1 1 1,2 1,2 1,6 1,6 2
lg – ls max. 4 5 6,25 7,5 8,75 10 12,5 15 15 17,5 17,5 20 20 22,5 22,5 25 25 27,5
c max. 0,5 0,5 0,6 0,6 0,6 0,8 0,8 0,8 0,8 0,8 0,8 0,8 1 1 1 1 1 1
m min. 4,4 4,9 6,44 8,04 10,37 14,1 16,9 20,2 22,5 24,3 27,4 29,4 31,8 32,4 34,4 36,4 40,4 43,4
S 8 10 13 16 18 24 30 36 41 46 50 55 60 65 70 75 80 85
Edition: 2005-08
H 572
Page 3
Dimensions in mm
d M5 M6 M8 M10 M12 M16 M20 M24 (M27) M30 (M33) M36 (M39) M42 (M45) M48 (M52) M56
*) The range of commercial available lengths is indicated between the double lines.
Product class A for lengths above the broken line.
Edition: 2005-08
Standard
Partnumber
57527800W M10x70 Hexagon bolt A2-70
H575/EN24017 cert. 2.2
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. - 8. 9.
Material 1) 4) 8)
Kind of part Type of Thread min. / max. Wallthick- Certificate
bolt application ness
Cd. Cd. temp. °C Cd. Cd. Cd. Cd.
2) 5) metric 2 8.8 -10 / 200 20 0 0 3.1B 1
Hexagon bolt 575 acc. to ISO 261 Electr. coat. A3E 7) 2.1 B
EN24017 5.6 -10 / 300 21 0 T 2.2 W
1) Materials:
Stainless steels acc.to DIN ISO 3506
Strength category acc.to ISO 898-1 and -2
Electroplated coatings acc.to ISO 4042
6) Strength category A2-70 / A4-70 preferably only up to M20, above that use A2-50 / A4-50.
For d ³ M42 the stainless material has to be stipulated.
Page 2
15 to 30°
Detail X
Chamfered end c a
Detail X
(tapered top)
r
d
e
3) u
dw
da
k l 0,1
S
Reference line
for dw
Dimensions in mm
d M5 M6 M8 M10 M12 M16 M20 M24 (M27) M30 (M33) M36 (M39) M42 (M45) M48 (M52) M56
P #) 0,8 1 1,25 1,5 1,75 2 2,5 3 3 3,5 3,5 4 4 4,5 4,5 5 5 5,5
da max. 5,7 6,8 9,2 11,2 13,7 17,7 22,4 26,4 30,4 33,4 36,4 39,4 42,4 45,6 48,6 52,6 56,6 63
e min.
(Prod.
cl. A) 8,79 11,05 14,38 17,77 20,03 26,75 33,53 39,98 - - - - - - - - - -
cl. B) - - - - - 26,17 32,95 39,55 45,20 50,85 55,37 60,79 66,44 71,3 76,95 82,6 88,25 93,56
k
(Nom. 3,5 4 5,3 6,4 7,5 10 12,5 15 17 18,7 21 22,5 25 26 28 30 33 35
dim.)
dw min.
(Prod.
cl. A) 6,88 8,88 11,63 14,63 16,63 22,49 28,19 33,61 - - - - - - - - - -
cl. B) - - - - - 22 27,7 33,25 38 42,75 46,55 51,11 55,86 59,95 64,7 69,45 74,2 78,66
r min. 0,2 0,25 0,4 0,4 0,6 0,6 0,8 0,8 1 1 1 1 1 1,2 1,2 1,6 1,6 2
a max. 2,4 3 4 4,5 5,3 6 7,5 9 9 10,5 10,5 12 12 13,5 13,5 15 15 16,5
c max. 0,5 0,5 0,6 0,6 0,6 0,8 0,8 0,8 0,8 0,8 0,8 0,8 1 1 1 1 1 1
S 8 10 13 16 18 24 30 36 41 46 50 55 60 65 70 75 80 85
#) P = pitch
Edition: 2001-09
H 575
Page 3
Dimensions in mm
d M5 M6 M8 M10 M12 M16 M20 M24 (M27) M30 (M33) M36 (M39) M42 (M45) M48 (M52) M56
*) The range of commercial available lengths is indicated between the double lines.
Product class A for lengths above the broken line.
Edition: 2001-09
Standard
Gaskets
acc.to ASME B16.21 and B16.20 H 600
Page 1 of 31
Table of Content
Page
Tolerances 2
Page 2
Oval Ring
A Ringtolerances
P = ± 0,4 mm
*) B
A = ± 0,2 mm
+ 1,2 mm
P B=
- 0,4 mm
P 23°
Groove tolerances
F + 0,4 mm
R E=
-0
E
F = ± 0,2 mm
P = ± 0,13 mm
R = min. dimension
23° = ± 1/2°
Gaskets for large male and female and large tongue and groove should cover
the bottom of the recess having minimum width, considering the tolerances of
± 0,5 mm specified by the respective standards for these facings.
Edition: 98-03
Full Face Flat Gaskets
for Flange Facing FF (Flat Face)
H 600
ASME B16.21 / AWWA C207
Part No. 6 0 2) 1 1) 0 3) 2 Page 3
Example of Designation of a plain flat gasket for nominal diameter 6", Class 150
Designation: material: natural rubber
Partnumber
60119B002 6" Flat gasket Full Face Class 150
H600 / ASME B16.21 natural rubber
Partnumbering Code
Position of Part No.
1. - 2 3. 4. 5. - 6. 7.- 8. 9.
2) 1) Special 5)
Kind of Part Class Type Material type 3) Certificate
Cd. Cd. Cd. Cd. Cd. Cd. Cd.
150 1 plain 1 Natural rubber (NR) 9B 0 0 ASME 2
Full Face 60 D D Rubber with 2 plies 9F 0 A
Flat Gaskets E H of fabric 0 S
ItÖ 4) 9G
It 400 4) 9K
SBR-Rubber, red, 9R
premium grade
Edition: 98-03
H 600
Page 4
Full Face Flat Gaskets for flange facing FF (Flat Face) acc.to ASME B16.21
for Flanges Class 150 acc.to ASME B16.5
2
d
k
d1
Dimensions in mm
Edition: 98-03
H 600
Page 5
d3
2
d
k
d1
Dimensions in mm
Edition: 98-03
H 600
Page 6
d3
2
d
k
d1
Dimensions in mm
Edition: 98-03
Flat Ring Gaskets
for flange facing RF (Raised Face)
H 600
ASME B16.21 / MSS-SP44 / AWWA C207
Part No. 6 1 2) 1 1) 3) 2
Page 7
Example of Designation of a self centering flat ring gasket for flanges ASME B16.5, class 300, nominal diameter 16",
Designation: material: graphite with stainless steel insert
Partnumber
61219S002 16" Flat Ring Gasket self centering Class 300
H600 / ASME B16.21 Graphite/SS
Partnumbering Code
Position of Part No.
1. - 2 3. 4. 5. - 6. 7.- 8. 9.
2) 1) Special 5)
Kind of Part Class Type Material type 3) Certificate
Cd. Cd. Cd. Cd. Cd. Cd. Cd.
150 1 flat 1 Acryl / Neoprene 9A 0 0 ASME 2
Flat Ring 61 300 2 (self centering) NR (Natural rubber) 9B 0 F
Gasket for 400 3 It 200 4) 9C 0 G
flange facing 600 4 ItÖ-Cold 4) 9D 0 A
Raised face 900 5 PTFE 9E 0 S
D D Rubber with 2 plies 9F
E H of fabric
ItÖ 4) 9G
ItC 4) 9H
CR (Neoprene) with 9J
steel insert
It 400 4) 9K
ItS 4) 9L
Asbestos w. steel insert 4) 9M
Acryl / Nitrile 9N
NBR-reinforced 9P
SBR-Rubber, red, 9R
premium grade
Graphite with SS insert 9S
ItC, free of chloride 4) 9T
FPM, reinforced 9V
PTFE reinforced 9X
Garlock-Qualities Application limits
p (bar) T (°C) max. pxT
Garfite N È ItÖ K1 138 400 25000
1) Material code acc.to VAI-Std. H0005
Garfite S È It400 K2 138 400 25000
It-Material acc.to DIN3754 only for expiring projects
All other materials acc.to manufacturer´s standard Garfite TI (Graphite) K3 138 470 25000
Style 3000 (Steam) K4 70 200 12000
2) Code for Class; Style 3300 (Oil-Gas) K5 80 200 12000
Class-designation acc.to ASME B16.21 or Style 3400 (Chemicals) K6 80 200 12000
AWWA C207. Style 3300 (Cryogenics) K7 80 -50 / +200 12000
Style 3700 (Ozone) K8 80 200 12000
3) Code for special type Gylon Style White 3510E K9 40 260 12000
Gylon Type Standard 3501E P9 82 260 12000
00 = Requirements and dimensions acc.to ASME B16.21, for flanges acc.to ASME B16.5
0F = "free of oil and grease", packed, certified and marked for "oxygen service"
Requirements and dimensions acc.to ASME B16.21, for flanges acc.to ASME B16.5
0G = "free of oil and grease", packed, certified and marked for "oxygen service"
Requirements and dimensions acc.to ASME B16.21, for flanges acc.to MSS-SP44 (ASME B16.47/Series A)
0A = Requirements and dimensions acc.to AWWA C207 for flanges acc.to AWWA C207
0S = Requirements acc.to ASME B16.21, dimensions for flanges acc.to MSS-SP44 (ASME B16.47/Series A)
Edition: 98-03
H 600
Page 8
Leerseite
Edition: 98-03
Flat Ring Gaskets
for flange facing RF (Raised Face)
H 600
Class 150 - 900 / ASME B16.21 / MSS-SP44
Part. No. 6 1 2) 2 1) 3) 2
Page 9
Example of Designation of an inside jacketed flat ring gasket for flanges MSS-SP-44, class 300,
Designation: nominal diameter 4", material: Garlock Blue Gard Style 3300 with jacket of Gr.304
Partnumber
6122K50S2 4" Flat Ring Gasket inside jacketed class 300
H600 / MSS-SP44 Garlock Style 3300 / Gr.304
Partnumbering Code
Position of Part No.
1. - 2 3. 4. 5. - 6. 7.- 8. 9.
2) 1) Special 5)
Kind of Part Class Type Material type 3) Certificate
Kz. Cd. Cd. Cd. Cd. Cd. Cd.
150 1 Inside 2 SBR-Rubber / PTFE 9E 0 0 ASME 2
Flat Ring 61 300 2 jacketed ItÖ / 1.4541 4) 9G 0 F
Gasket for 400 3 ItC / 1.4404 4) 9H 0 G
flange facing 600 4 It 400 / 1.4571 4) 9K 0 S
Raised Face 900 5
Edition: 98-03
H 600
Page 10
2
Required flange facing
RF (Raised Face)
(Ra = 250 - 500 µinch)
d
d2
Flat Ring Gasket inside jacketed (self centering ) acc.to ASME B16.21
for Flanges acc.to ASME B16.5, Class 150 - 900
Dimensions in mm
inch mm d 150 300 400 600 900 150 300 400 600 900 1500
1/2 15 21 47 53 53
3/4 20 27 57 66 66
1 25 33 66 73 see 73 see
1 1/4 32 42 76 82 Class 82 Class
1 1/2 40 48 85 95 600 95 1500
2 50 60 104 111 111
2 1/2 65 73 123 130 130
3 80 89 136 149 149 168
4 100 114 174 180 177 193 206
5 125 141 196 215 212 241 247
6 150 168 222 250 247 266 288
8 200 219 279 307 304 320 358
10 250 273 339 361 358 400 434
12 300 324 409 422 419 457 498
14 350 356 450 485 482 492 520
16 400 406 514 539 536 565 574
20 500 508 606 654 647 682 698
24 600 610 717 774 768 790 838
Edition: 98-03
H 600
Page 11
2
Required flange facing
RF (Raised Face)
(Ra = 250 - 500 µinch)
d
d2
Flat Ring Gasket inside jacketed (self centering) acc.to ASME B16.21
for Flanges acc.to MSS-SP-44, Class 150 - 900 (ASME B16.47, Series A)
3
RF (Raised Face)
d (Ra = 125 - 500 µinch)
d2
Dimensions in mm
inch mm d 150 300 400 600 900 150 300 400 600 900
(22) 550 559 659 703 700 732 -
26 650 661 774 834 830 865 881
28 700 712 830 897 891 913 945
30 750 763 882 951 945 970 1008
32 800 814 938 1005 1002 1021 1072
34 850 865 990 1056 1053 1072 1135
36 900 916 1047 1116 1116 1129 1199
38 950 967 1110 1053 1072 1103 1199
40 1000 1017 1161 1113 1131 1154 1249
42 1050 1068 1218 1164 1177 1218 1300
44 1100 1119 1275 1218 1230 1269 1367
46 1150 1170 1326 1272 1288 1326 1434
48 1200 1221 1383 1322 1345 1389 1484
50 1250 1271 1434 1376 1402 1446 -
52 1300 1322 1491 1427 1453 1497 -
54 1350 1373 1548 1491 1516 1554 -
56 1400 1424 1605 1542 1567 1611 -
58 1450 1475 1162 1592 1618 1662 -
60 1500 1525 1713 1643 1681 1719 -
Edition: 98-03
H 600
Page 12
2
d
d2
Dimensions in mm
*) Flanges acc.to AWWA C207, Class D or E suit to flanges Class 125 acc.to ASME B16.1
resp. Class 150 acc.to ASME B16.5.
Edition: 98-03
Flat Ring Gaskets double jacketed
for flange facing RF (Raised Face)
H 600
Class 150 - 900 / similar to ASME B16.21
Part No. 6 1 2) 4 1) 3) 2
Page 13
Example of Designation of a double jacketed flat ring gasket, class 600 for nominal diameter 10",
Designation: material: jacket Gr. 304, filler graphite
Partnumber
61440C002 10" Flat Ring Gasket double jacketed Class 600
H600 / ASME B16.20 Gr.304 / Graphite
Partnumbering Code
Position of Part No.
1. - 2 3. 4. 5. - 6. 7.- 8. 9.
2) 1) Special 5)
Kind of Part Class Type Material type 3) Certificate
Cd. Cd. Cd. Cd. Cd. Cd. Cd.
150 1 Double 4 Gr.304 / Graphite 0C 0 0 ASME 2
Flat Ring 61 300 2 jacketed Gr.316 / Graphite 0Z 0 F
Gasket for 400 3 PTFE / Garlock Style 3300 0E
flange facing 600 4
Raised Face 900 5 Soft iron / Asbestos 4) 0M
Al / Asbestos 4) 0N
Gr.321 / Asbestos 4) 0P
PTFE / It 400 4) 9E
Jacket :
Al, soft iron and PTFE acc.to manufacture´s standard.
Stainless steel acc.to nach ASTM 167
Filler :
Asbestos acc.to DIN 3752 4)
It-Materials acc.to DIN 3754 4)
all other materials acc.to manufacturer´s standard
Edition: 98-03
H 600
Page 14
Double Jacketed Flat Ring Gasket for flange facing RF (Raised Face) Class 150 - 900
with decreased contact surface compared with ASME B16.21.
3
Marking
d1
d2
Dimensions in mm
Nominal Weight
diameter d1 d2 kg / 100 pcs.
inch mm
1/2 15 23,0 33,3
3/4 20 28,6 39,7
1 25 36,5 47,6
1 1/4 32 44,4 60,3
1 1/2 40 52,4 69,8
2 50 69,8 88,9
2 1/2 65 82,5 101,6
3 80 98,4 123,8
4 100 123,8 154,0
5 125 150,8 182,6
6 150 177,8 212,7
8 200 228,6 266,7
10 250 282,6 320,7
12 300 339,7 377,8
14 350 371,5 409,6
16 400 422,3 466,7
20 500 530,2 581,0
24 600 631,8 682,6
Edition: 98-03
Spiral wound gasket
for flange facing RF (Raised Face)
H 600
Class 150 - 2500 / ASME B16.20 *)
Part. No. 6 1 2) 5 1) 3) 2 Page 15
Example of Designation of a spiral wound gasket with centering ring and internal ring, class 1500 for nominal
Designation: diameter 10", material: spiral Gr.304 with graphite filler, internal ring Gr.304, centering ring C-steel
Partnumber
61650USR2 10" Spiral wound gasket with int-/centering ring Class 1500
H600 / ASME B16.20/B16.5 Gr.304/Graphite/Steel
Partnumbering Code
Position of Part No.
1. - 2 3. 4. 5. - 6. 7.- 8. 9.
2) 1) Special 5)
Kind of Part Class Type Material type 3) Certificate
Cd. Cd. Cd. Cd. Cd. Cd. Cd.
150 1 1.4541 / It 200 4) 0P 0 0 ASME 2
Flat Ring 61 300 2 1.4571 / It 400 4) 0Q 0 F
Gasket for 400 3 Spiral wound 5 1.4306 / ItC 4) 0R 0 S
flange facing 600 4 gasket 1.4301 / PTFE-Asbestos 4) 0S S R
Raised Face 900 5 1.4541/Graphite / 4) 0T S F
1500 6 Asbestos
2500 7 Gr.304/Graphite/Gr.304 0C
Gr.321/Graphite/Gr.321 0D
Gr.304/Graphite/C-Steel 0U
Gr.304/PTFE/C-Steel §) 0V
Gr.316/PTFE/C-Steel §) 0W
Gr.321/Graphite/C-Steel 0Y
Gr.316/Graphite/C-Steel 0Z
*) Spiral wound gaskets acc.to ASME B16.20 recently standarized by API 601.
Edition: 98-03
H 600
Page 16
Spiral wound gasket Class 150-600 Spiral wound gasket Class 150-600
with centering ring acc.to ASME B16.20 with centering ring and internal ring
for Flanges acc.to ASME B16.5 acc.to ASME B16.20
with flange facing Raised Face (RF) for Flanges acc.to ASME B16.5
with flange facing Raised Face (RF)
Marking
4,5 *)
Marking
4,5 *)
3
3
d2 d1
d3 d2
d4 d3
d4
Dimensions in mm
Nominal d1 d2 d3 d4
diameter Class Class Class Class
150- 400- 150- 400- 150-
inch mm 300 600 300 600 600 150 300 400 600
1/2 15 14,2 19,0 31,7 47,7 54,1
3/4 20 20,6 25,4 39,6 57,1 66,8
1 25 26,9 31,7 47,7 66,8 73,1
1 1/4 32 38,1 47,7 60,4 76,2 82,5
1 1/2 40 44,4 54,1 69,8 85,8 95,2
2 50 55,6 69,8 85,8 104,9 111,2
2 1/2 65 66,5 82,5 98,5 123,9 130,3
3 80 81,0 101,6 120,6 136,6 149,3
4 100 106,4 127,0 194,3 174,7 181,1 177,8 193,8
5 125 131,8 155,7 177,8 196,8 215,9 212,8 241,3
6 150 157,2 182,6 209,5 222,2 250,9 247,6 266,7
8 200 215,9 209,5 233,4 225,5 263,6 279,4 308,1 304,8 320,8
10 250 268,2 260,3 287,3 274,6 317,5 339,8 361,9 358,9 400,0
12 300 317,5 317,5 339,8 327,1 374,6 409,7 422,4 419,1 457,2
14 350 349,2 349,2 371,6 361,9 406,4 450,8 485,9 482,6 492,2
16 400 400,0 400,0 422,4 412,7 463,5 514,3 539,7 536,7 565,1
18 450 449,3 449,3 474,7 469,9 527,0 549,4 596,9 593,8 612,9
20 500 500,1 500,1 525,5 520,7 577,8 606,5 654,0 647,7 682,7
24 600 603,2 603,2 628,6 628,6 685,8 717,5 774,7 768,3 790,7
Edition: 98-03
H 600
Page 17
Spiral wound gasket Class 900-2500 Spiral wound gasket Class 900-2500
with centering ring acc.to ASME B16.20 with centering ring and internal ring
for Flanges acc.to ASME B16.5 acc.to ASME B16.20
with flange facing Raised Face (RF) for Flanges acc.to ASME B16.5
with flange facing Raised Face (RF)
Marking
4,5 *)
Marking
4,5 *)
3
3
d2 d1
d3 d2
d4 d3
d4
Dimensions in mm
Nominal d1 d2 d3 d4
diameter Class Class Class Class
900 -
inch mm 900 1500 2500 900 1500 2500 2500 900 1500 2500
1/2 15 14,2 19,0 31,7 63,5 63,5 69,8
3/4 20 20,6 25,4 39,6 69,8 69,8 76,2
1 25 26,9 31,7 47,7 79,5 79,5 85,8
1 1/4 32 33,3 39,6 60,4 88,9 88,9 104,9
1 1/2 40 41,4 47,7 69,8 98,5 98,5 117,6
2 50 52,3 58,7 85,8 143,0 143,0 146,0
2 1/2 65 63,5 69,8 98,5 165,1 165,1 168,4
3 80 81,0 95,2 92,2 92,2 120,6 168,4 174,7 196,8
4 100 106,4 120,6 117,6 117,6 149,3 206,5 209,5 234,9
5 125 131,8 147,6 143,0 143,0 177,8 247,6 254 279,4
6 150 157,2 174,7 171,4 171,4 209,5 289,0 282,7 317,5
8 200 209,5 206,2 200,1 222,2 215,9 215,9 257,3 358,9 352,5 387,3
10 250 260,3 257,8 247,6 276,3 266,7 270,0 311,1 435,1 435,1 476,2
12 300 314,4 314,4 292,1 323,8 323,8 317,5 368,3 498,6 520,7 549,4
14 350 342,9 339,8 355,6 361,9 400,0 520,7 577,8
16 400 393,7 387,3 412,7 406,4 457,2 574,8 641,3
18 450 444,5 438,1 463,5 463,5 520,7 638,3 704,8
20 500 495,3 488,9 520,7 514,3 571,5 698,5 755,6
24 600 603,2 577,8 628,6 615,9 679,4 838,2 901,7
Edition: 98-03
H 600
Page 18
Special type-Code : S S
SX
Marking
4,5 *)
3
d1
d2
d3
d4
Dimensions in mm
Nominal d1 d2 d3 d4
diameter Class Class Class Class
inch mm 150 300 400 150 300 400 150 300 400 150 300 400
26 650 654,0 660,4 673,1 685,8 704,8 736,6 774,7 835,1 831,8
28 700 704,8 711,2 723,9 736,6 755,6 787,4 831,8 898,6 892,3
30 750 755,6 755,6 774,7 793,7 806,4 844,5 882,6 952,5 946,1
32 800 806,4 812,8 825,5 850,9 860,5 901,7 939,8 1006,6 1003,3
34 850 857,2 863,6 876,3 901,7 911,3 952,5 990,6 1057,4 1054,1
36 900 908,0 917,7 927,1 955,8 968,5 1006,6 1047,7 1117,6 1117,6
38 950 958,8 952,5 952,5 977,9 977,9 971,5 1019,3 1016 1022,3 1111,2 1054,1 1073,1
40 1000 1009,6 1003,3 1000,2 1028,7 1022,3 1025,6 1070,1 1070,1 1076,4 1162,0 1114,5 1127,2
42 1050 1060,4 1054,1 1051,0 1079,5 1073,1 1076,4 1123,9 1120,9 1127,2 1219,2 1165,3 1178,0
44 1100 1111,2 1104,9 1104,9 1130,3 1130,3 1130,3 1178,0 1181,1 1181,1 1276,3 1219,2 1231,9
46 1150 1162,0 1152,6 1168,4 1181,1 1178,0 1193,8 1228,8 1228,8 1244,6 1327,1 1273,3 1289,0
48 1200 1212,8 1209,8 1206,5 1231,9 1235,2 1244,6 1279,6 1286,0 1295,4 1384,3 1324,1 1346,2
50 1250 1263,6 1244,6 1257,3 1282,7 1295,4 1295,4 1333,5 1346,2 1346,2 1435,1 1377,9 1403,3
52 1300 1314,4 1320,8 1308,1 1333,5 1346,2 1346,2 1384,3 1397 1397 1492,2 1428,7 1454,1
54 1350 1358,9 1352,5 1352,5 1384,3 1403,3 1403,3 1435,1 1454,1 1454,1 1549,4 1492,2 1517,6
56 1400 1409,7 1403,3 1403,3 1435,1 1454,1 1454,1 1485,9 1504,9 1504,9 1606,5 1543,0 1568,4
58 1450 1460,5 1447,8 1454,1 1485,9 1511,3 1504,9 1536,7 1562,1 1555,7 1663,7 1593,8 1619,2
60 1500 1511,3 1524 1517,6 1536,7 1562,1 1568,4 1587,5 1612,9 1619,2 1714,5 1644,6 1682,7
Edition: 98-03
H 600
Page 19
Special type-Code : SS
SX
Marking
4,5 *)
3
d1
d2
d3
d4
Dimensions in mm
Nominal d1 d2 d3 d4
diameter Class Class Class Class
inch mm 600 900 600 900 600 900 600 900
26 650 647,7 666,7 685,8 736,6 866,9 882,6
28 700 698,5 711,2 736,6 787,4 914,4 946,1
30 750 755,6 774,7 793,7 844,5 971,5 1009,6
32 800 812,8 812,8 850,9 901,7 1022,3 1073,1
34 850 863,6 863,6 901,7 952,5 1073,1 1136,6
36 900 917,7 920,7 955,8 958,8 1006,6 1009,6 1130,3 1200,1
38 950 952,5 1009,6 990,6 1035,0 1041,4 1085,8 1104,9 1200,1
40 1000 1009,6 1060,4 1047,7 1098,5 1098,5 1149,3 1155,7 1250,9
42 1050 1066,8 1111,2 1104,9 1149,3 1155,7 1200,1 1219,2 1301,7
44 1100 1111,2 1155,7 1162,0 1206,5 1212,8 1257,3 1270 1368,5
46 1150 1162,0 1219,2 1212,8 1270 1263,6 1320,8 1327,1 1435,1
48 1200 1219,2 1270 1270 1320,8 1320,8 1371,6 1390,6 1485,9
50 1250 1270 1320,8 1371,6 1447,8
52 1300 1320,8 1371,6 1422,4 1498,6
54 1350 1377,9 1428,7 1479,5 1555,7
56 1400 1428,7 1479,5 1530,3 1612,9
58 1450 1473,2 1536,7 1587,5 1663,7
60 1500 1530,3 1593,8 1644,6 1733,5
Edition: 98-03
H 600
Page 20
Leerseite
Edition: 98-03
Flat Gaskets
for flange facing Large Tongue / Large Groove
H 600
Class 150 - 1500 / ASME B16.21
Part No. 6 2 6 2) 1) 0 0 2
Page 21
Partnumber
62619R002 10" Flat Gasket LT/LG
H600 / ASME B16.21/B16.5 SBR-rubber, red, premium grade
Partnumbering Code
Position of Part No.
1. - 2 3. 4. 5. - 6. 7.- 8. 9.
2) 2) 1) Special 5)
Kind of Part Class Type Material type 4) Certificate
Cd. Cd. Cd. Cd. Cd. Cd. Cd.
150 flat 1 Flat Gasket: 0 0 ASME 2
Flat Gasket 62 - 6 ItÖ-K 3) 9D
for 1500 double 4 ItÖ 3) 9G
Large Tongue / jacketed ItC 3) 9H
Large Groove It 400 3) 9K
(LT / LG) ItS 3) 9L
SBR-Rubber, red, 9R
premium grade
PTFE-plies of fabric 9X
Double jacketed:
1.4541 / Asbestos 3) 0P
PTFE / Garlock Style 3300 0E
PTFE / It 400 3) 9E
Graphite 9S
a) Flat Gaskets
It-Materials acc.to DIN 3754 (for expiring projects)
All other materials acc.to manufacturer´s standard
Edition: 98-03
H 600
Page 22
min. 0,3
3
2
d1 d1
d2 d2
Dimensions in mm
Nominal Weight
diameter d1 d2 kg / 100 pcs.
inch mm
1/2 15 25 35
3/4 20 33 43
1 25 38 51
1 1/4 32 47 64
1 1/2 40 54 73
2 50 73 92
2 1/2 65 86 105
3 80 108 127
4 100 132 157
5 125 160 186
6 150 190 216
8 200 238 270
10 250 286 324
12 300 343 381
14 350 374 413
16 400 425 470
20 500 533 584
24 600 641 692
Edition: 98-03
Flat Gaskets H 600
for flange facing Large Male / Large Female
Class 150 - 1500 / ASME B16.21
Part No. 6 3 6 1 1) 0 0 2 Page 23
Partnumber
63619S002 4" Flat Gasket LM/LF
H600 / ASME B16.21/B16.5 Graphite / SS
Partnumbering Code
Position of Part No.
1. - 2 3. 4. 5. - 6. 7.- 8. 9.
2) 1) Special 5)
Kind of Part Class Type Material type 4) Certificate
Cd. Cd. Cd. Cd. Cd. Cd. Cd.
150 flat 1 ItÖ-K 9D 0 0 ASME 2
Flat Gasket 63 - 6 Rubber with 2 plies 9F
for 1500 of fabric
Large Male / ItÖ 3) 9G
Large Female ItC 3) 9H
(LM / LF) It 400 3) 9K
ItS 3) 9L
Graphite 9S
Edition: 98-03
H 600
Page 24
Flat Gasket for flange facing Large Male (LM) / Large Female (LF)
Class 150 - 1500 acc.to ASME B16.21
2
d1
d2
Dimensions in m
inch mm d1 d2
1/2 15 21 35
3/4 20 27 43
1 25 33 51
1 1/4 32 42 64
1 1/2 40 48 73
2 50 60 92
2 1/2 65 73 105
3 80 89 127
4 100 114 157
5 125 141 186
6 150 168 216
8 200 219 270
10 250 273 324
12 300 324 381
14 350 356 413
16 400 406 470
20 500 508 584
24 600 610 692
Edition: 98-03
Ring-Joint-Gaskets H 600
Class 150 - 2500 / ASME B16.20
Part No. 6 8 2) 3) 1) 5) 2
Page 25
Example of Designation of an oval Ring-Joint-Gasket for nominal diameter 10" and Class 600,
Designation: material: ASTM A182 Gr.F5 soft annealed
Partnumber
68475F002 10" Ring-Joint-Gasket oval Class 600
H600 / ASME B16.20 / B16.5 A182 Gr.F5 soft annealed
Partnumbering Code
Position of Part No.
1. - 2 3. 4. 5. - 6. 7.- 8. 9.
2) 3) 4) 1) Code for 5) 6)
Kind of Part Class Type Matertial Ring No. Certificate
Cd. Cd. Cd. Cd. Cd.
150 1 A182 Gr.F5 soft annealed 5F 00 = no ASME 2
Ring-Joint- 68 300 2 A182 Gr.F321 / 5M direct
Gasket 400 3 octogonal 6 max. HB130 0S= coding
600 4 Ring Type A182 Gr.F316 / 5P
900 5 oval 7 max. HB130 11 = R11
1500 6 Ring Type A182 Gr.F321 / 5Q . .
2500 7 max. HB130 . .
A182 Gr.F347 / 5R . .
max. HB130 . .
Armco-Iron J1 . .
99 = R99
. .
A0 = R100
. .
. .
A5 = R105
4) For flanges acc.to ASME B16.47/Series A (MSS-SP44) there are only octagonal rings standardized.
Edition: 98-03
H 600
Page 26
A A
Marking
B H
P C
Detail Z
Detail Z
5
=1,
b
R1
E
F
P 23° 23°
23°
Dimensions in mm
Pitch
Ring No. Nominal Raised diameter Depth Width Width Width Height Weight
diameter face of of groove of groove of ring of of ring kg/100 pcs..
groove flattening
DN K P E F A C B H
R15 1" 63,5 47,62
R17 1 1/4" 73,0 57,15
R19 1 1/2" 82,6 65,09
R22 2" 101,6 82,55
R25 2 1/2" 120,7 101,60
R29 3" 133,4 114,30
R33 3 1/2" 154,0 131,76
R36 4" 171,5 149,22
R40 5" 193,7 171,45 6,35 8,7 7,9 5,23 14,3 12,7
R43 6" 219,1 193,68
R48 8" 273,1 247,65
R52 10" 330,2 304,80
R56 12" 406,4 381,00
R59 14" 425,5 396,88
R64 16" 482,6 454,02
R68 18" 546,1 517,52
R72 20" 596,9 558,80
R76 24" 711,2 673,10
Edition: 98-03
H 600
Page 27
A A
Marking
B H
P C
Detail Z
Detail Z
5
=1,
b
R1
E
F
P 23° 23°
23°
Dimensions in mm
Pitch
Ring No. Nominal Raised diameter Depth Width Width Width Height Weight
diameter face of of groove of groove of ring of of ring kg/100 pcs..
groove flattening
DN K P E F A C B H
R11 1/2" 50,8 34,13 5,55 7,1 6,35 4,32 11,1 9,6
R13 3/4" 63,5 42,86
R16 1" 69,9 50,80 6,35 8,7 7,9 5,23 14,3 12,7
R18 1 1/4" 79,4 60,32
R20 1 1/2" 90,5 68,26
R23 2" 107,9 82,55
R26 2 1/2" 127,0 101,60
R31 3" 146,1 123,82
R34 3 1/2" 158,8 131,76
R37 4" 174,6 149,22
R41 5" 209,6 180,98
R45 6" 241,3 211,14 7,9 11,9 11,1 7,75 17,5 16,0
R49 8" 301,6 269,88
R53 10" 355,6 323,85
R57 12" 412,8 381,00
R61 14" 457,2 419,10
R65 16" 508,0 469,90
R69 18" 574,7 533,40
R73 20" 635,0 584,2 9,53 13,5 12,7 8,66 19,1 17,5
R77 24" 749,3 692,2 11,13 16,7 15,9 10,49 22,4 20,6
Edition: 98-03
H 600
Page 28
A A
Marking
B H
P C
Detail Z
Detail Z
5
=1,
b
R1
E
F
P 23° 23°
23°
Dimensions in mm
Pitch
Ring No. Nominal Raised diameter Depth Width Width Width Height Weight
diameter face of of groove of groove of ring of of ring kg/100 pcs..
groove flattening
DN K P E F A C B H
R12 1/2" 60,3 39,69
R14 3/4" 66,7 44,45
R16 1" 71,4 50,80 6,35 8,7 7,9 5,23 14,3 12,7
R18 1 1/4" 81,0 60,32
R20 1 1/2" 92,1 68,26
R24 2" 123,8 95,25
R27 2 1/2" 136,5 107,95
R31 3" 155,6 123,82
R37 4" 181,0 149,22
R41 5" 215,9 180,98 7,9 11,9 11,1 7,75 17,5 16,0
R45 6" 241,3 211,14
R49 8" 308,0 269,88
R53 10" 361,9 323,85
R57 12" 419,1 381,00
R62 14" 466,7 419,10 11,1 16,7 15,9 10,49 22,2 20,6
R66 16" 523,9 469,90
R70 18" 593,7 533,40 12,7 19,8 19,0 12,32 25,4 23,9
R74 20" 647,7 584,20
R78 24" 771,7 692,15 15,9 27,0 25,4 17,30 33,3 31,8
Edition: 98-03
H 600
Page 29
A A
Marking
B H
P C
Detail Z
Detail Z
)
5*
=1,
R1
b
E
F
23° 23°
23° P
Dimensions in mm
Pitch
Ring No. Nominal Raised diameter Depth Width Width Width Height Weight
diameter face of of groove of groove of ring of of ring kg/100 pcs..
groove flattening
DN K P E F A C B H
R12 1/2" 60,3 39,69
R14 3/4" 66,7 44,45
R16 1" 71,4 50,80 6,35 8,7 7,9 5,23 14,3 12,7
R18 1 1/4" 81,0 60,32
R20 1 1/2" 92,1 68,26
R24 2" 123,8 95,25
R27 2 1/2" 136,5 107,95
R35 3" 168,3 136,52 7,9 11,9 11,1 7,75 17,5 16,0
R39 4" 193,7 161,92
R44 5" 228,6 193,68
R46 6" 247,6 211,14 9,5 13,5 12,7 8,66 19,0 17,5
R50 8" 317,5 269,88
R54 10" 371,5 323,85
R58 12" 438,1 381,00 14,3 23,0 22,2 14,81 28,6 26,9
R63 14" 488,9 419,10 15,9 27,0 25,4 17,30 33,3 31,8
R67 16" 546,1 469,90 30,2 28,6 19,81 36,5 35,1
R71 18" 612,8 533,40 17,5
R75 20" 673,1 584,20 33,3 31,7 22,33 39,7 38,1
R79 24" 793,8 692,2 20,6 36,5 34,9 24,82 44,5 41,4
Edition: 98-03
H 600
Page 30
A A
Marking
B H
P C
Detail Z
Detail Z
)
,5 *
=1
R1
b
F
23° 23°
23° P
Dimensions in mm
Pitch
Ring No. Nominal Raised diameter Depth Width Width Width Height Weight
diameter face of of groove of groove of ring of of ring kg/100 pcs..
groove flattening
DN K P E F A C B H
R13 1/2" 65,1 42,9
R16 3/4" 73,0 50,8 6,35 8,7 7,9 5,23 14,3 12,7
R18 1" 82,5 60,3
R21 1 1/4" 101,6 72,2
R23 1 1/2" 114,3 82,5 7,9 11,9 11,1 7,75 17,5 16,0
R26 2" 133,3 101,6
R28 2 1/2" 149,2 111,1 9,5 13,5 12,7 8,66 19,0 17,5
R32 3" 168,3 127,0
R38 4" 203,2 157,2 11,1 16,7 15,9 10,49 22,4 20,6
R42 5" 241,3 190,5 12,7 19,8 19,0 12,32 25,4 23,9
R47 6" 279,4 228,6
R51 8" 339,7 279,4 14,3 23,0 22,2 14,81 28,7 26,9
R55 10" 425,4 342,9 17,5 30,2 28,6 19,81 36,6 35,1
R60 12" 469,3 406,4 17,5 33,3 31,7 22,33 39,7 38,1
Edition: 98-03
H 600
Page 31
C
Detail Z
Detail Z
)
5*
=1,
R1
b
F 23° 23°
23° P
Dimensions in mm
Pitch
Ring No. Raised diameter Depth Width Width Width Height Applied for Weight
face of of groove of groove of ring of of ring Class kg/100 pcs..
groove flattening 300 - 900
K P E F A C H 600
R93 809,8 749,3 26"
R94 860,6 800,1 12,7 19,84 19,1 12,3 23,9 28"
R95 917,4 857,3 30"
R96 984,3 914,4 32"
R97 1035,1 965,2 14,27 23,01 22,2 14,81 26,9 34"
R98 1092,2 1022,4 36"
R100 831,9 749,3 30,18 28,6 19,81 35,1 26"
R101 889,0 800,1 17,48 28"
R102 946,2 857,3 33,32 31,8 22,33 38,1 30"
R103 1003,3 914,4 32"
R104 1066,8 965,2 20,62 36,53 34,9 24,82 41,4 34"
R105 1124,0 1022,35 36"
**) There are no Ring-Joint-Gaskets assigned for nominal diameter 38" and larger.
Ring number 80 not adopted for single nominal diameter 22" / Class 150.
Edition: 98-03
Standard
Flat Gaskets
PN6 - 63 / DIN2690 H 610
Page 1 of 9
Example of Designation of a flat gasket for nominal diameter 250, PN10, with certificate 2.1,
Designation: material: Klingersil C4409
Partnumber
Partnumbering Code
Position of Part No.
1. - 2. 3. 4. 5. - 6. 7. - 8. 9.
Nominal 4) 1) Special 5) 7)
Kind of Part pressure Type Material type Certificate
Cd. PN Cd. Cd. Cd. Cd. Cd. Cd.
6 1 flat ring 1 a) b) Flat Gaskets 0 0 2.2 W
Flat Gasket 60 10 2 Rubber (NR) with 93 0 F 2.1 B
with 16 3 2 plies of fabric 6)
bolt holes 25 4 Neoprene (CR) with 96 DVGW 4
DIN2690 40 5 steel insert
Butyl - Rubber (IIR) BR
with steel insert
Graphite with CT
Flat Gasket 61 stainless steel insert
DIN2690 EPDM EN
EPDM with EP
steel insert
FPM with FP
steel insert
Rivatherm-Super / KG
Graphite
NBR with NB
1) Material: steel insert
a) Flat gaskets with bolt holes (page 4) and Natural rubber (NR) NR
b) Flat gaskets (page 5 and 6)
- all materials acc. to manufacturer´s standard Garlock-Gylon (PTFE) PY = Klinger
- Requirements and examinations acc. to Style 3501E Topchem 2000
DIN28090-1 to -3 and DIN28091-1 to -4 Klinger Topchem 2000 KY
Page 2
Example of Designation of an inside jacketed flat gasket for nominal diameter 100, PN40, with certificate 2.2,
Designation: material: Klingersil C4500 with jacket of 1.4404
Partnumber
6152KF00W 100 Flat gasket inside jacketed PN40 Klingersil C4500 / 1.4404
H610 / DIN2690 cert. 2.2
Partnumbering Code
Edition: 2001-12
H 610
Page 3
Application Limits:
Flat Gaskets
Maximum Manufacturer´s Qualities:
Material Mateial
Designation Code Service limits
Reinz Kempchen
PN °C
Rubber (NR) with 93 16 70
2 plies of fabric
Neoprene (CR) 96 16 80
with steel insert
Butyl-rubber (IIR) BR 16 100
with steel insert
Graphite with CT 63 400 Chemotherm SPE
stainless steel insert
EPDM EN 10 120
EPDM with EP 16 120
steel insert
FPM with steel insert FP 16 150
Rivatherm-Super / KG 63 500 Rivatherm-Super /
Graphite Graphite
NBR with steel insert NB 16 80
Natural rubber (NR) NR 10 70
Garlock-Gylon PY 16 170 Klinger
(PTFE) Style 3501E Topchem 2005
Manufacturer´s Qualities:
Klingersil Reinz Kempchen Frenzelit
C4430 KB 40 170
C4400 KC 25 130 AFM 32 Multi II
C4409 KD 40 200 AFM 34 Metall 8)
C4500 KF 40 200
C4400 (Cold) KK 25 - 60 AFM 33
C8200 KS 10 70
Klingersil PSM 200 KP 40 500
(SLS-P)
Graphite with Kevlar GK 25 150 §) Novatec Premium
NS 16 150 Novatec Super
Klinger Topchem 2000 KY 40 250
Edition: 2001-12
H 610
Page 4
2
flange facing on request or
form B (Rz=160) D acc. to piping
specifications
D2
D1
Dimensions in mm
Nom. PN 6 PN10 PN16 PN25 PN40
diam. D
Num Num Num Num Num
DN D1 D2 ber d D1 D2 ber d D1 D2 ber d D1 D2 ber d D1 D2 ber d
10 18 75 50 4 11 90 60 4 14
15 22 80 55 4 11 95 65 4 14
20 27 90 65 4 11 105 75 4 14
25 34 100 75 4 11 115 85 4 14
32 43 120 90 4 14 acc. to PN40 acc. to PN40 140 100 4 18
40 49 130 100 4 14 150 110 4 18
acc. to PN40
50 61 140 110 4 14 165 125 4 18
65 77 160 130 4 14 185 145 8 18
80 89 190 150 4 18 200 160 8 18
100 115 210 170 4 18 220 180 8 18 235 190 8 22
125 141 240 200 8 18 acc. to PN16 250 210 8 18 270 220 8 26
150 169 265 225 8 18 285 240 8 22 300 250 8 26
200 220 320 280 8 18 340 295 8 22 340 295 12 22 360 310 12 26 375 320 12 30
250 273 375 335 12 18 395 350 12 22 405 355 12 26 425 370 12 30 450 385 12 33
300 324 440 395 12 22 445 400 12 22 460 410 12 26 485 430 16 30 515 450 16 33
350 356 490 445 12 22 505 460 16 22 520 470 16 26 555 490 16 33 580 510 16 36
400 407 540 495 16 22 565 515 16 26 580 525 16 30 620 550 16 36 660 585 16 39
(450) 458 595 550 16 22 615 565 20 26 640 585 20 30 670 600 20 36 685 610 20 39
500 508 645 600 20 22 670 620 20 26 715 650 20 33 730 660 20 36 755 670 20 42
600 610 755 705 20 26 780 725 20 30 840 770 20 36 845 770 20 39 890 795 20 48
700 712 895 840 24 30 910 840 24 36 960 875 24 42
800 813 1015 950 24 33 1025 950 24 39 1085 990 24 48
900 915 1115 1050 28 33 1125 1050 28 39 1185 1090 28 48
1000 1016 1230 1160 28 36 1255 1170 28 42 1320 1210 28 56
1200 1220 1455 1380 32 39 1485 1390 32 48 1530 1420 32 56
1400 1420 1675 1590 36 42 1685 1590 36 48 1755 1640 36 62
1600 1620 1915 1820 40 48 1930 1820 40 56 1975 1860 40 62
1800 1820 2115 2020 44 48 2130 2020 44 56 2195 2070 44 70
2000 2020 2325 2230 48 48 2345 2230 48 62 2425 2300 48 70
Edition: 2001-12
H 610
Page 5
2
flange facing on request or
form C (Rz=160) acc. to piping
d1
specifications
d2
Dimensions in mm
Nom.
d 2 for nominal pressure PN
diam. d1
DN 6 10 16 25 40
6 10 28 38
8 14 33 43
10 18 38 45
15 22 43 50
20 28 53 60
acc. to acc. to
25 35 63 70
PN40 PN40
32 43 75 acc. to 82
40 49 85 PN40 92
50 61 95 107
65 77 115 127
80 90 132 142
100 115 152 162 168
125 141 182 192 195
acc. to
150 169 207 218 225
PN16
(175) 195 237 248 255 267
200 220 262 273 285 292
250 274 318 328 330 342 353
300 325 373 378 385 402 418
350 368 423 438 445 458 475
400 420 473 490 497 515 547
(450) 470 528 540 557 565 572
500 520 578 595 618 625 628
600 620 680 695 735 730 745
700 720 785 810 805 830 850
800 820 890 915 910 940 970
900 920 990 1015 1010 1040 1080
1000 1020 1090 1120 1125 1150 1190
1200 1220 1305 1340 1340 1360 1395
1400 1420 1520 1545 1540 1575 1615
1600 1620 1720 1770 1760 1795 1830
1800 1820 1930 1970 1960 2000 -
2000 2020 2135 2180 2165 2230 -
2200 2220 2345 2380 2375 - -
2400 2420 2555 2590 2585 - -
2600 2620 2760 2790 2785 - -
2800 2820 2970 3010 - - -
3000 3020 3170 3225 - - -
Edition: 2001-12
H 610
Page 6
Required
s
flange facing
form C (Rz=160)
d1
d2
Dimensions in mm
Nom. d 2 for nominal pressure PN Thickn.
diam. d1
DN 6 10 16 25 40 s
15 22 43 50
20 28 53 60
25 35 63 70 3
32 43 75 acc. to acc. to 82
40 49 85 PN40 PN40 92
acc. to
50 61 95 107
PN40
65 77 115 127 4
80 90 132 142
100 115 152 162 (168)
125 141 182 192 (195) 5
acc. to
150 169 207 218 225
PN16
(175) 195 (237) 248 (255) 267
200 220 (262) 273 (285) 292
250 274 (318) 328 330 342 (353) 6
300 325 (373) 378 385 402 418
350 368 423 438 445 458 (475)
400 420 473 490 497 515 547
(450) 470 (528) 540 (557) (565) (572) 7
500 520 (578) 595 618 625 (628)
600 620 (680) 695 735 730 745
700 720 (785) 810 (805) (830) (850)
800 820 890 915 910 940 (970)
900 920 (990) 1015 1010 1040 (1080)
1000 1020 1090 1120 1125 1150 1190 8
1200 1220 1305 1340 - 1360 1395
1400 1420 (1520) 1545 - - -
1600 1620 (1720) 1770 - - -
1800 1820 (1930) 1970 - - -
2000 2020 (2135) 2180 - - -
*) Dimensions for diameters and thickness acc. to Kempchen Profile WG whereas bracketed
dimensions were completed acc. to DIN2690.
Thickness and diameters may vary from manufacturer to manufacturer.
Edition: 2001-12
H 610
Page 7
3
precompressed
Required
Other thicknesses
flange facing
on request or
form C (Rz=160)
acc. to piping
form D (Rz=40)
specifications
d1
d2
Dimensions in mm
Nom.
d 2 for nominal pressure PN PN63
diam. d1 b
DN 6 10 16 25 40 d1 d2
10 18 3 38 45 20 56
15 22 3 43 50 26 61
20 28 4 53 60 - -
25 35 5 63 70 36 82
acc. to acc. to
32 43 5 75 82 - -
PN40 PN40
40 49 5 85 acc. to 92 53 102
50 61 5 95 PN40 107 65 112
65 77 5 115 127 78 138
80 90 6 132 142 95 147
100 115 6 152 162 168 118 173
125 141 6 182 192 195 142 210
acc. to
150 169 6 207 218 225 170 247
PN16
(175) 195 6 237 248 255 267 195 277
200 220 6 262 273 285 292 224 309
250 274 8 318 328 330 342 353 275 364
300 325 8 373 378 385 402 418 325 424
350 368 8 423 438 445 458 475 368 486
400 420 8 473 490 497 515 547 426 543
500 520 10 578 595 618 625 628
600 620 10 680 695 735 730 745
700 720 10 785 810 805 830 850
800 820 10 890 915 910 940 970
900 920 12 990 1015 1010 1040 1080
1000 1020 12 1090 1120 1125 1150 1190
1200 1220 15 1305 1340 1340 1360 1395
1400 1420 15 1520 1545 1540 1575 1615
1600 1620 15 1720 1770 1760 1795 1830
1800 1820 18 1930 1970 1960 2000
2000 2020 18 2135 2180 2165 2230
Edition: 2001-12
H 610
Page 8
3
Marking
Required
flange facing
form E (Rz=16)
d1 a
d2
Dimensions in mm
Nom.
diam. d1 d2 a
DN
10 22 38 8
15 26 42 8
20 31 47 8
25 36 52 8
32 46 66 10
40 53 73 10
50 65 87 11
65 81 103 11
80 95 121 13
100 118 144 13
125 142 176 17
150 170 204 17
(175) 195 229 17
200 224 258 17
250 275 315 20
300 325 365 20
350 375 420 22,5
400 426 474 24
500 530 578 24
600 630 680 25
700 730 780 25
800 830 880 25
900 930 980 25
1000 1030 1080 25
Edition: 2001-12
H 610
Page 9
Coat
3
Required Filler
flange facing
form C (Rz=160)
Dimensions in mm
Nom.
D for nominal pressure PN
diam. d
DN 6 10 16 25 40
10 18 38 45
15 22 43 50
20 28 53 60
25 35 63 70
acc. to acc. to
32 43 75 82
PN40 PN40
40 49 85 acc. to 92
50 61 95 PN40 107
65 77 115 127
80 90 132 142
100 115 152 162 168
125 141 182 acc. to 192 195
150 169 207 PN16 218 225
200 220 262 273 285 292
250 274 318 328 330 342 353
300 325 373 378 385 402 418
350 368 423 438 445 458 475
400 420 473 490 497 515 547
500 520 578 595 618 625 628
600 620 680 695 735 730 745
Edition: 2001-12
Standard
Item: Flat Gaskets
for Pipe unions DIN2950 & DIN2993
H 658
Part No.: 6 5 8 2) 1) 0 0 B
Page 1 of 1
Example of Designation of a flat gasket for pipe unions acc.to DIN2993, nominal size 2",
Designation: with certificate 2.1, material : asbestos-free material e.g. Klingersil C4400 @ ItC
Partnumber
6581KC00B 2" Flat gasket for union
DIN2993 / H658 cert. 2.1 Klingersil C4400 @ ItC
Partnumbering Code
Position of Part No.
1. - 3 4. 5. - 6. 7.- 8. 9.
2) 1) 3)
Kind of Part Type Material Wallthickness Certificate
Cd. Cd. Cd. Code Code Cd.
For pipe unions 1 Klingersil - Quality 0 0 2.1 B
Flat gaskets 658 acc.to DIN2993 C4430 @ It 200 KA
for For pipe unions C4430 @ It 400/ItC KB
pipe unions acc.to DIN2950 resp. 2 C4400 @ ItC KC
ÖNORM M1930 C4409 @ ItÖ / ItC KD
C4400 @ ItÖ KE
C4500 @ ItC KF
C4400 @ ItÖ-K KK
SLS-P / Graphite KP
C8200 @ ItS KS
Hydraulik - Gaskets
H 699
Page 1 from 2
Example for Designation of an O-Ring Gasket for a weld on-flange (hydraulic flange)
purchasing: Type A2 with nominal size 125, with certificate 2.1, Material: NBR (Perbunan)
Partnumber
69929900B 125/NG 100 O-RING GASKET FOR NBR(PERBUNAN)
WELD ON-FLANGES H469/TYPE A2&B2 H699 CERT:2.1
1) Materials:
FPM (Viton) or NBR (Perbunan) acc. to manufacturer’s standard
Hardness for SAE-O-Rings acc. to SAE J515: 90 ±5 Shore A
Hardness for welding nipple-O-Rings acc. to DIN 3865: 80 ±5 Shore A
H 699
Page 2
N L
Dimensions in mm
O-Ring
nominal size
N M L size- Weight
DN number kg/ piece
1/2" 25,70 18,64 210
3/4" 32,05 24,99 214
1" 39,98 32,92 219
1 1/4" 44,75 37,69 222
1 1/2" 3,53 54,28 47,22 225
2" 63,80 56,74 228
2 1/2" 76,50 69,44 232
3" 92,38 85,32 237
(3 1/2") 105,08 98,02 241
4" 117,78 110,72 245
5" 143,18 136,12 253
Dimensions refer to SAE J518c
Ausgabe: 2006-10
(W6 RLSD) Gespeichert in: N:\MIG4B\ARBEITSMITTEL\9_ES\BAUTEILESTANDARD\DIN-BAUTEILESTANDARD\H699_E-2006-10.DOC
Standard
Piping Supports
Survey H 700
Page 1 of 1
STANDARD
Type of Support Piping
non insulation heat insulation cold insulation
GENERAL PART H701
H710N H710W H710K
SUPPORTS
for horizontal piping
H711N 1)
H715N 2)
¾ ¾
H720W H720K
SUPPORTS
for vertical piping
H730W H730K
PIPE STANCHIONS
H750W H750K
PIPE HANGERS
1. Partnumbering system
7 1 0 W F L 2 4 B
Material group
Insulation group
Type of support
Standard
2. Insulation groups
Page 2
3. Material groups
Material
Material Temperature Piping
group range °C spec. All parts partly or completely All parts completely outside
1) 2) inside of insulation of insulation
min. max. Sections, Plates Screws, Nuts Sections, Plates Screws, Nuts
1 -200 -106 A 1.4541 A2-70
DIN17440 ISO 3506
2 -105 -51 B TTStE 255 12Ni19 / A2-70
DIN17102 DIN17280 / ISO
3506
3 -50 300 C, D S235 JR 3) 5.6 / 5 3)
EN10025 DIN267-13 S235 JR 5.6 / 5
4 301 450 E, F H II Ck 35 EN10025 DIN267-13
DIN17155 DIN17240
5 451 480 G 15Mo3 24CrMo5 / Ck 35
DIN17155 DIN17240
6 481 560 G, J, K 13CrMo44 21CrMoV57
DIN17155 DIN17240
Material
Material Temperature Parts welded onto pipe lines and parts All other parts
group range °C with metallic contact to piping material inside and outside
(e.g. Stop lug, U-Bolt, Strap bolt, of insulation
min. max. Sliding plate, Saddle plate) 4) (also pipe clamp)
A -105 -51 acc.to mat. gr. 2
B -50 300 1.4541 DIN17440 acc.to mat. gr. 3
C 301 450 acc.to mat. gr. 4
D 451 480 acc.to mat. gr. 5
E 481 560 acc.to mat. gr. 6
2) Piping specification code for material acc.to H0002 and H0003. If specified material groups
are applied for other materials as acc.to piping specification, the compatibility and
weldability shall be checked.
4) Not valid for pipe clamps acc.to H790 part 3 (see para. 4.6)
Edition: 99-07
H 701
Page 3
4.1 Dimensions in mm
4.4 Fabrication shall be performed acc.to DIN18800 part 7 with the level
" predominant static load " including following requirements:
The maximum throat of fillet weld shall be not more than 0,7 x smallest wallthickness.
4.5 For welding at supporting parts onto pipelines the same requirements as that
for pipelines are valid. Requirements concerning the welding of different materials
shall be especially observed.
4.6 On pipelines made of stainless steel, aluminium and nonferrous metals an intermediate
layer of 0,5 mm gasket-material (acc.to VAI-Std. H640) shall be provided between pipe
clamps and pipes, if material of clamps is not the same type as that of pipe.
Edition: 99-07
Standard
Supports
for horizontal, uninsulated carbon steel piping H 710 N
Page 1 of 7
Survey:
15 - 250
300 - 1000
Remarks:
*) Not a component part. Use partnumber only for take off supporting points.
Page 2
Da
~40
H
10
~40°
Welded at 8 (Venting)
erection
L
Position 1
Piece 1
Edition: 99-07
H 710 N
Page 3
a Z
d
b
e
Welded at
l erection
Detail
Z
45
°
1
Position 1 2
Piece 1 1
Edition: 99-07
H 710 N
Page 4
DN
1
l
1 2 1
(DN300 - 700) (DN800 - 1000)
Welded at erection
Position 1 2
Piece 2 1
Slide
Pipe Guide plate Weight
Angle 1/2 IPB H710N kg / piece
DN Da DIN1028 DIN1025 l Type
300 323,9 100 x 10 100 5,72
350 355,6 6,02
400 406,4 120 x 12 100 7,72
500 508 GL 8,62
600 610 150 x 15 200 18,72
700 711 23,52
800 813 36,26
900 914 240 300 37,76
1000 1016 39,06
Edition: 99-07
H 710 N
Page 5
P £ 5 kN
2 DN
a Z
s
d
b
e
Welded and finish
l grinded at erection
Detail
1 Z 45°
Position 1 2
Piece 1 1
Edition: 99-07
H 710 N
Page 6
P £ 10 kN
1
Alternativ
DN erection
2 40 60
a
25
20x45°
d 3
150 40
w l
b
Matched and
welded at erection
Position 1 2 3
Piece 2 4 2
Stop lug
Pipe Strap Angle DIN1028 Flat bar Weight
H790, Type BF DIN1017 kg / piece
DN Da a l w d b
150 168,3 176 282 9,4
200 219,1 228 80 x 8 140 45 18 334 25 x 10 10,2
250 273,0 282 388 11,0
Edition: 99-07
H 710 N
Page 7
P £ 20 kN
1
Alternativ
DN erection
2 10 ~l/2
a 0
20x45°
d 15 50
w 0 l
b
3
4 Matched and
welded at erection
Position 1 2 3 4
Piece 2 4 2 1
Stop lug Slide
Pipe Strap Angle DIN1028 Angle plate Weight
H790, Type BF DIN1028 H710, kg / piece
DN Da a l w d b Type
300 323,9 332 462 21,8
350 355,6 380 100 x 10 150 55 22 510 80 x 8 22,9
400 406,4 428 558 24,3
500 508 530 660 27,2
600 610 635 759 GL 47,3
700 711 735 120 x 12 180 50 26 859 55,3
800 813 835 959 100 x 10 59,8
900 914 935 150 x 15 200 60 32 1085 86,5
1000 1016 1035 1185 91,7
Edition: 99-07
Standard
Supports
Survey:
15 - 150
200 - 500
600 - 1000
Remarks:
Page 2
DN
s
H
1
3 b
Position 1 2 3
Piece GL 1 - 1
FL 1 2 1
Sliding Guide Pipe clamp Weight
Pipe angle
H base H790 Type RSA kg / piece
DIN1024 H790
DN Da Type d1 Bolt GL FL
15 21,3 116 22 M8x30 5,1 5,5
20 26,9 119 27 5,2 5,6
25 33,7 122 34 5,2 5,6
M10x30
32 42,4 127 43 5,3 5,6
40 48,3 130 49 5,3 5,7
50 60,3 136 T100 FWA 61 5,6 6,0
65 76,1 144 77 M12x35 5,7 6,1
80 88,9 150 89 5,8 6,1
100 114,3 165 115 6,8 7,2
125 139,7 178 140 M16x45 7,1 7,4
150 168,3 192 169 7,4 7,7
Edition: 2000-07
H 710 W
Page 3
Insulation
Type
group
GL
2
FL
Position 1 2 3
GL 1 - 1
Piece
FL 1 2 1
Sliding Guide Pipe clamp Weight
Pipe angle
H base H790 Type RSA kg / piece
DIN1024 H790
DN Da Type d1 Bolt GL FL
15 21,3 156 22 M8x30 9,6 10,0
20 26,9 159 27 9,7 10,0
25 33,7 162 34 9,7 10,1
M10x30
32 42,4 167 43 9,8 10,1
40 48,3 170 49 9,8 10,1
50 60,3 176 T140 FWA 61 10,1 10,5
65 76,1 184 77 M12x35 10,2 10,5
80 88,9 190 89 10,3 10,6
100 114,3 205 115 11,3 11,7
125 139,7 218 140 M16x45 11,6 11,9
150 168,3 232 169 11,8 12,2
Insulation
Type
group
GL
3
FL
Position 1 2 3
GL 1 - 1
Piece
FL 1 2 1
Sliding base Guide Pipe clamp Weight
Pipe Plate angle
H H790 Type RSA kg / piece
EN10029 H790
DN Da b s Type d1 Bolt GL FL
15 21,3 216 22 M8x30 5,3 5,7
20 26,9 219 27 5,4 5,8
25 33,7 222 80 8 34 5,4 5,8
M10x30
32 42,4 227 43 5,5 5,8
40 48,3 230 49 5,5 5,9
50 60,3 236 FWA 61 7,5 7,9
65 76,1 244 100 10 77 M12x35 7,6 8,0
80 88,9 250 89 7,7 8,0
100 114,3 265 115 11,1 11,5
125 139,7 278 140 12 140 M16x45 11,4 11,7
150 168,3 292 169 11,7 12,0
Edition: 2000-07
H 710 W
Page 4
DN
~90°
90°
H
1
4
35 5
2
a
b 3
10 300
3 Welded at erection 340
Position 1 2 3 4 5
GL 2 4 - 1 2
Piece
FL 2 4 2 1 2
Edition: 2000-07
H 710 W
Page 5
Insulation
Type
group
GL
2
FL
Position 1 2 3 4 5
Piece GL 2 4 - 1 2
FL 2 4 2 1 2
Insulation
Type
group
GL
3
FL
Position 1 2 3 4 5
GL 2 4 - 1 2
Piece
FL 2 4 2 1 2
Edition: 2000-07
H 710 W
Page 6
DN
~90°
H
1
4
5
2
35
a
b 3
10 500 for DN600-700
700 for DN800-1000
3 Welded at erection
540 for DN600-700
740 for DN800-1000
Position 1 2 3 4 5
GL 2 4 - 1 2
Piece
FL 2 4 2 1 2
Edition: 2000-07
H 710 W
Page 7
Insulation
Type
group
GL
2
FL
Position 1 2 3 4 5
Piece GL 2 4 - 1 2
FL 2 4 2 1 2
Insulation
Type
group
GL
3
FL
Position 1 2 3 4 5
Piece GL 2 4 - 1 2
FL 2 4 2 1 2
Edition: 2000-07
H 710 W
Page 8
P[10 kN
DN
s
H
1
s
a 2
b
3 Welded at erection t 200
230
Position 1 2 3
Piece 1 2 2
Edition: 2000-07
H 710 W
Page 9
Insulation
Type
group
FP 2
Position 1 2 3
Piece 1 2 2
Insulation
Type
group
FP 3
Position 1 2 3
Piece 1 2 2
Supportin
g
Head plate Pipe clamp Weight
Pipe H base
DIN1017 H790 Type RSA kg / piece
Plate
EN10029
DN Da b s a t d1 Bolt
15 21,3 216 30 6 22 M8x30 4,2
20 26,9 219 27 4,4
25 33,7 222 80 8 34 4,5
M10x30
32 42,4 227 43 4,6
40 48,3 230 49 4,6
40 6
50 60,3 236 61 6,3
65 76,1 244 100 10 77 M12x35 6,4
80 88,9 250 89 6,6
100 114,3 265 115 10,8
125 139,7 278 140 12 60 8 140 M16x45 11,3
150 168,3 292 169 11,8
Edition: 2000-07
H 710 W
Page 10
P[20 kN
DN
~ 90°
H
25
1
5
35
a
2
b
4 10 300
Welded at erection 340 130
Position 1 2 3 4 5
Piece 2 4 2 1 2
Edition: 2000-07
H 710 W
Page 11
Insulation
Type
group
FP 2
Position 1 2 3 4 5
Piece 2 4 2 1 2
Head Spacer
Supporting Pipe clamp Stop lug
Pipe plate 10 mm plate Weight
H base H790 Type RSA Flat bar
EN10029 5 mm kg / piece
DIN1029 DIN1017
EN10029
DN Da a b d1 Bolt
200 219,1 258 132 232 220 M16x45 132x300 20,3
250 273,0 285 148 248 273 148x300 23,4
300 323,9 310 160 280 324 M20x50 160x300 25,7
L180x90x10 25 x 12
350 355,6 326 170 330 356 170x300 28,8
400 406,4 353 180 340 407 180x300 36,4
M24x60
500 508,0 404 202 362 508 202x300 40,1
Insulation
Type
group
FP 3
Position 1 2 3 4 5
Piece 2 4 2 1 2
Supporting Head Spacer
Pipe clamp Stop lug
Pipe base plate 10 mm plate Weight
H H790 Type RSA Flat bar
plate EN10029 5 mm kg / piece
DIN1017
EN10029 EN10029
DN Da a b d1 Bolt
200 219,1 318 132 232 220 M16x45 132x300 26,3
250 273,0 345 148 248 273 148x300 29,4
300 323,9 370 160 280 324 M20x50 160x300 32,1
12 thick 25 x 12
350 355,6 386 170 330 356 170x300 35,6
400 406,4 413 180 340 407 180x300 43,2
M24x60
500 508,0 464 202 362 508 202x300 46,9
Edition: 2000-07
H 710 W
Page 12
DN
~
90°
H
25
5
35 10
1
a 2
b
4 10 500 for DN600-700
700 for DN800-1000
Welded at erection
540 for DN600-700 150
740 for DN800-1000
Position 1 2 3 4 5
Piece 2 4 2 1 4
Head Spacer
Supporting Pipe clamp Stop lug
Pipe plate 10 mm plate Weight
H base H790 Type RSA Flat bar
EN10029 10 mm kg / piece
DIN1029 DIN1017
EN10029
DN Da a b d1 Bolt
600 610 415 222 382 610 222x500 58,2
750 711 456 240 400 712 M24x70 240x500 63,3
800 813 517 L120x80x10 254 414 813 254x700 25 x 12 79,0
900 914 568 278 438 915 278x700 90,0
M24x75
1000 1013 618 286 446 1016 286x700 96,7
Edition: 2000-07
H 710 W
Page 13
Insulation
Type
group
FP 2
Position 1 2 3 4 5
Piece 2 4 2 1 4
Head Spacer
Supporting Pipe clamp Stop lug
Pipe plate 10 mm plate Weight
H base H790 Type RSA Flat bar
EN10029 10 mm kg / piece
DIN1029 DIN1017
EN10029
DN Da a b d1 Bolt
600 610 455 222 382 610 222x500 62,7
750 711 496 240 400 712 M24x70 240x500 69,0
800 813 557 L180x90x10 254 414 813 254x700 25 x 12 85,1
900 914 608 278 438 915 278x700 96,2
M24x75
1000 1013 658 286 446 1016 286x700 102,1
Insulation
Type
group
FP 3
Position 1 2 3 4 5
Piece 2 4 2 1 4
Supporting Head Spacer
Pipe clamp Stop lug
Pipe base plate 10 mm plate Weight
H H790 Type RSA Flat bar
Plate EN10029 10 mm kg / piece
DIN1017
EN10029 EN10029
DN Da a b d1 Bolt
600 610 515 222 402 610 222x500 74,6
750 711 556 240 420 712 M24x70 240x500 81,3
800 813 616 12 thick 254 434 813 254x700 25 x 12 101,6
900 914 668 278 458 915 278x700 112,8
M24x75
1000 1013 718 286 466 1016 286x700 119,2
Edition: 2000-07
Standard
Supports
for horizontal, uninsulated stainless steel piping H 711 N
Page 1 of 8
Survey:
15 - 125
150 - 500
600 - 1000
Remarks:
- Types of DN150 - 1000 are also valid for pipe lines made of carbon steel (material group 3).
Page 2
1
DN
Z
2
c Welded 10
at erection
c
Detail Z
45°
Position 1
Piece 1
Edition: 99-07
H 711 N
Page 3
DN
10
h
Z
3
Welded
3 2
at
Detail
150
45°
200 for DN150 - 250
1 300 for DN300 - 500
Position 1 2 3
Piece GL 2 1 -
FL 2 1 2
Pipe clamp Sliding Guide
Pipe H H790 base Flat bar Weight
Type RSA DIN1026 DIN1017 kg / piece
DN Da d1 Bolt GL FL
150 168,3 131 169 M16x45 U 100 7,0 7,3
200 219,1 159 220 8,0 8,3
250 273,0 184 273 13,9 14,2
300 323,9 216 324 M20x50 U 200 30 x 5 17,2 17,5
350 355,6 235 356 17,8 18,1
400 406,4 257 407 M24x60 U 300 31,2 31,5
500 508,0 321 508 33,7 34,0
Edition: 99-07
H 711 N
Page 4
DN
400
50
R
1 90°
H
Z
100
2 Y
15 3 Welded at
200
erection
a Detail Z Detail Y
25
45°
300
1
8 (Venting)
Position 1 2
Piece GL 1 -
FL 1 2
Pipe saddle Guide Weight
Pipe H Plate 10 mm Flat bar kg / piece
EN10029 DIN1017
DN Da R a GL FL
600 610 405 315 430 36,4 38,0
700 711 455 365 500 41,5 43,1
800 813 507 415 570 50 x 10 47,2 48,8
900 914 557 465 650 53,6 55,2
1000 1016 608 520 700 58,2 59,8
Edition: 99-07
H 711 N
Page 5
3 10 Z
a
2
Y
s
c
d1
c b
e
l Welded at erection
Detail
Detail Y 45°
Z 45°
1
Position 1 2 3
Piece 1 1 1
Edition: 99-07
H 711 N
Page 6
2 DN
3 10 Z
a Y
2
s
c
d1
c b
e
l Welded at erection
Detail Y
Detail Z
45°
45°
1
Position 1 2 3
Piece 1 1 1
Edition: 99-07
H 711 N
Page 7
DN
10 l
H
a
3 s
Welded at erection
200 for DN150 - 250
Position 1 2 3
Piece 2 1 2
Pipe clamp Sliding Stop lug
Pipe H H790 base Plate Weight
Type RSA DIN1026 EN10029 kg / piece
DN Da d1 Bolt axsxl
150 168,3 131 169 M16x45 U 100 60x3x100 7,56
200 219,1 159 220 8,54
250 273,0 184 273 15,74
300 323,9 216 324 M20x50 U 200 19,53
350 355,6 235 356 80x5x150 20,25
400 406,4 257 407 M24x60 U 300 34,0
500 508,0 321 508 37,4
Edition: 99-07
H 711 N
Page 8
DN
400
R 50
1 90°
H
100
Y
Welded at
erection
15 2
a
Detail
23
25 Y
300
30
8 (Venting)
c
Position 1 2 1)
Piece 1 4
Pipe saddle Bolt
Pipe H Plate 10 mm EN24016 Weight
EN10029 Nut kg / piece
EN24034
DN Da R a c
600 610 405 315 430 295 36,3
700 711 455 365 500 365 41,4
800 813 507 415 570 435 M20 47,1
900 914 557 465 650 515 53,5
1000 1016 608 520 700 565 58,1
Edition: 99-07
Standard
Supports
for vertical, uninsulated and heat insulated pipe lines H 720 W
Page 1 of 15
Survey:
Anchor
Pipe Slide FB at vessel
DN - range GB at vessel FS at structural steel
GS at structural steel TP Supporting bracket
Page 8, 9
15 - 150
200 - 500
600 - 1000
Remarks:
Page 2
6
18
10
P horiz.
150
< 2 kN for DN15 - 65
reference altitude < 3 kN for DN80 - 150
100
30 60
7 10 3
Detail Z
Z
45°
DN
100
vessel axis
6
1
115
10 b 4
5 l 10
Position 1 2 3 4 5 6 7
GB 1 1 2 1 2 1 1
Piece
GS 1 1 2 1 - 1 1
Web Bolt Base Sliding
Pipe Bracket Plate Guide Pipe clamp EN24017 plate plate Weight
DIN1026 6 mm angle H790 Nut 10 mm 10 mm kg / piece
U 100 EN10029 DIN1028 Type RSA EN24032 EN10029 EN10029 for GB
DN Da l b d1 Bolt
15 21,3 150 22 M8x30 5,7
20 26,9 150 27 5,8
25 33,7 170 34 M10x30 6,1
32 42,4 175 43 6,2
40 48,3 185 49 6,3
50 60,3 200 110 40 x 5 61 M16x35 100x150 115x120 6,8
65 76,1 210 77 M12x35 7,0
80 88,9 230 89 7,2
100 114,3 260 115 8,6
125 139,7 295 140 M16x45 9,2
150 168,3 325 169 9,8
Edition: 2000-07
H 720 W
Page 3
Insulation
Type
group
GB
2
GS
Position 1 2 3 4 5 6 7
GB 1 1 2 1 2 1 1
Piece
GS 1 1 2 1 - 1 1
Web Bolt Base Sliding
Pipe Bracket Plate Guide Pipe clamp EN24017 plate plate Weight
DIN1026 6 mm angle H790 Nut 10 mm 10 mm kg / piece
U 100 EN10029 DIN1028 Type RSA EN24032 EN10029 EN10029 for GB
DN Da l b d1 Bolt
15 21,3 160 22 M8x30 6,1
20 26,9 160 27 6,2
25 33,7 180 34 M10x30 6,4
32 42,4 185 43 6,5
40 48,3 195 49 6,7
50 60,3 210 150 40 x 5 61 M16x35 100x150 115x120 7,2
65 76,1 220 77 M12x35 7,3
80 88,9 240 89 7,6
100 114,3 270 115 9,0
125 139,7 305 140 M16x45 9,6
150 168,3 335 169 10,2
Insulation
Type
group
GB
3
GS
Position 1 2 3 4 5 6 7
GB 1 1 2 1 2 1 1
Piece
GS 1 1 2 1 - 1 1
Web Bolt Base Sliding
Pipe Bracket Plate Guide Pipe clamp EN24017 plate plate Weight
DIN1026 6 mm angle H790 Nut 10 mm 10 mm kg / piece
U 100 EN10029 DIN1028 Type RSA EN24032 EN10029 EN10029 for GB
DN Da l b d1 Bolt
15 21,3 150 22 M8x30 6,4
20 26,9 150 27 6,5
25 33,7 170 34 M10x30 6,8
32 42,4 175 43 6,9
40 48,3 185 49 7,0
50 60,3 200 210 40 x 5 61 M16x35 100x150 115x120 7,5
65 76,1 210 77 M12x35 7,7
80 88,9 230 89 7,9
100 114,3 260 115 9,3
125 139,7 295 140 M16x45 9,9
150 168,3 325 169 10,5
Edition: 2000-07
H 720 W
Page 4
l1
P horiz.[7 kN
50
26
1
reference altitude Detail Z
50 150 45°
Welded at erection
A 6 5 3
Section A - B
4
2
vessel axis
l2
a
DN
50
2
25
3 8 300
B
Position 1 2 3 4 5 6
GB 2 2 1 2 4 4
Piece
GS 2 2 1 2 4 -
Sliding Pipe clamp Bolt
Pipe Bracket base Strut H790 Guide EN24017 Weight
DIN1026 DIN1024 L60x6 Type RSA Flat bar Nut kg / piece
U120 DIN1028 DIN1017 EN24032 for GB
DN Da a l1 l2 d1 Bolt
200 219,1 440 1145 530 220 M16x45 51,4
250 273,0 494 1275 580 273 58,1
300 323,9 544 1390 T100 630 324 M20x50 25x8x120 M24x45 62,7
350 355,6 588 1500 680 356 66,6
400 406,4 632 1605 720 407 77,1
M24x60
500 508,0 732 1790 820 508 86,1
Edition: 2000-07
H 720 W
Page 5
Insulation
Type
group
GB
2
GS
Position 1 2 3 4 5 6
GB 2 2 1 2 4 4
Piece
GS 2 2 1 2 4 -
Sliding Pipe clamp Bolt
Pipe Bracket base Strut H790 Guide EN24017 Weight
DIN1026 DIN1024 L60x6 Type RSA Flat bar Nut kg / piece
U120 DIN1028 DIN1017 EN24032 for GB
DN Da a l1 l2 d1 Bolt
200 219,1 520 1215 610 220 M16x45 62,6
250 273,0 574 1325 664 273 68,8
300 323,9 634 1340 T140 724 324 M20x50 25x8x120 M24x45 70,8
350 355,6 670 1540 760 356 77,1
400 406,4 712 1645 802 407 87,6
M24x60
500 508,0 812 1830 902 508 96,5
Edition: 2000-07
H 720 W
Page 6
P horiz.[7 kN
50
26
1
reference altitude Detail Z
50 150 45°
Welded at erection
A 6 5 3
Section A - B
4
2
vessel axis
l2
a
DN
50
2
25
3 8 350
B
Position 1 2 3 4 5 6
Piece GB 2 2 1 2 4 4
GS 2 2 1 2 4 -
Sliding Pipe clamp Bolt
Pipe Bracket base Strut H790 Guide EN24017 Weight
DIN1026 DIN1024 L60x6 Type RSA Flat bar Nut kg / piece
U120 DIN1028 DIN1017 EN24032 for GB
DN Da a l1 l2 d1 Bolt
600 610 834 1765 924 610 94,8
700 711 936 1930 1026 712 M24x70 103,5
800 813 1038 2095 T100 1128 813 25x8x120 M24x45 112,7
900 914 1140 2260 1230 915 125,9
M24x75
1000 1016 1240 2430 1330 1016 135,8
Edition: 2000-07
H 720 W
Page 7
Insulation
Type
group
GB
2
GS
Position 1 2 3 4 5 6
Piece GB 2 2 1 2 4 4
GS 2 2 1 2 4 -
Sliding Pipe clamp Bolt
Pipe Bracket base Strut H790 Guide EN24017 Weight
DIN1026 DIN1024 L60x6 Type RSA Flat bar Nut kg / piece
U120 DIN1028 DIN1017 EN24032 for GB
DN Da a l1 l2 d1 Bolt
600 610 914 1805 1004 610 106,7
700 711 1016 1985 1106 712 M24x70 115,7
800 813 1118 2125 T140 1208 813 25x8x120 M24x45 124,3
900 914 1218 2295 1308 915 138,3
M24x75
1000 1016 1320 2455 1410 1016 147,4
Edition: 2000-07
H 720 W
Page 8
6
25
100
reference altitude
2
e
5
h
150
1
22
e
b
3 P vertical
50
4
c
vessel axis
Position 1 2 3 4 5 6
FB 1 1 1 2 2 1
Piece
FS 1 1 - 2 - 1
Web Pipe clamp Bolt
Pipe Bracket Plate Plate H790 EN24017 Stop lug Weight
DIN1026 EN10029 EN10029 Type RSA Nut Flat bar kg / piece
EN24032 DIN1017 for FB
DN Da a b c e h d1 Bolt
15 21,3 22 M8x30 5,34
20 26,9 27 5,52
25 33,7 200 34 M10x30 5,56
32 42,4 U100 6 100 300 43 5,75
40 48,3 49 5,79
50 60,3 150 61 M20x45 25x8 6,61
65 76,1 77 M12x35 7,35
250
80 88,9 89 7,72
100 114,3 115 15,02
300
125 139,7 U120 10 150 400 140 M16x45 15,52
150 168,3 350 169 16,28
Edition: 2000-07
H 720 W
Page 9
Insulation
Type
group
FB
2
FS
Position 1 2 3 4 5 6
FB 1 1 1 2 2 1
Piece
FS 1 1 - 2 - 1
Web Pipe clamp Bolt
Pipe Bracket Plate Plate H790 EN24017 Stop lug Weight
DIN1026 EN10029 EN10029 Type RSA Nut Flat bar kg / piece
EN24032 DIN1017 for FB
DN Da a b c e h d1 Bolt
15 21,3 22 M8x30 6,79
20 26,9 27 6,97
25 33,7 200 34 M10x30 7,01
32 42,4 U100 6 100 300 43 7,25
40 48,3 49 7,29
50 60,3 190 61 M20x45 25x8 6,99
65 76,1 77 M12x35 7,31
250
80 88,9 89 7,69
100 114,3 115 15,09
300
125 139,7 U120 10 150 400 140 M16x45 15,86
150 168,3 350 169 17,02
Insulation
Type
group
FB
3
FS
Position 1 2 3 4 5 6
FB 1 1 1 2 2 1
Piece
FS 1 1 - 2 - 1
Web Pipe clamp Bolt
Pipe Bracket Plate Plate H790 EN24017 Stop lug Weight
DIN1026 EN10029 EN10029 Type RSA Nut Flat bar kg / piece
EN24032 DIN1017 for FB
DN Da a b c e h d1 Bolt
15 21,3 22 M8x30 7,11
20 26,9 27 7,29
25 33,7 200 34 M10x30 7,33
32 42,4 U100 6 100 300 43 7,57
40 48,3 49 7,61
50 60,3 250 61 M20x45 25x8 8,37
65 76,1 77 M12x35 8,74
250
80 88,9 89 9,06
100 114,3 115 15,66
300
125 139,7 U120 10 150 400 140 M16x45 16,43
150 168,3 350 169 17,59
Edition: 2000-07
H 720 W
Page 10
4
25
Welded at erection
100
3
25
h
2
40
1
f c
P vert.[30 kN
P horiz.[5 kN
DN
b
Position 1 2 3 4
Piece 2 2 2 2
Bracket Pipe clamp Stop lug
Pipe Plate 8 mm H790 Flat bar Weight
EN10029 Type RSA DIN1017 kg / piece
DN Da b c f h d1 Bolt
50 60,3 61 5,30
65 76,1 77 M12x35 5,46
80 88,9 80 140 130 200 89 25x8 5,62
100 114,3 115 7,70
125 139,7 140 M16x45 8,20
150 168,3 169 8,76
Edition: 2000-07
H 720 W
Page 11
Insulation
Type
group
TP 2
Position 1 2 3 4
Piece 2 2 2 2
Bracket Pipe clamp Stop lug
Pipe Plate 8 mm H790 Flat bar Weight
EN10029 Type RSA DIN1017 kg / piece
DN Da b c f h d1 Bolt
50 60,3 61 6,30
65 76,1 77 M12x45 6,46
80 88,9 80 180 170 200 89 25x8 6,62
100 114,3 115 8,70
125 139,7 140 M16x45 9,20
150 168,3 169 9,76
Edition: 2000-07
H 720 W
Page 12
l1
350
150
7
26
6
10
reference altitude
50 150
1
45°
P vert. £ 50 kN
P horiz. £ 7 kN 2
e
l2
60
50
212
70
f
4
25
b
350
10
c
5
25
vessel axis
a
DN
3
Matched and welded
at erection
Edition: 2000-07
H 720 W
Page 13
Insulation
Type
group
FB
FS 1
TP
Position 1 2 3 4 5 6 7
FB 2 2 2 4 2 2 8
Piece FS 2 2 2 4 2 2 -
TP - - 2 4 2 2 -
Bracket Pipe clamp Stop lug Bolt
Pipe Cantilever DIN1026 Plate 10 mm H790 Flat bar EN24017 Weight
EN10029 Type RSA DIN1017 Nut kg / piece
U120 U100 EN24032
DN Da a e l1 l2 b c f d1 Bolt FB TP
200 219,1 436 182 169 220 M16x45 85,3 22,5
250 273,0 490 905 1130 1538 150 175 164 273 87,7 25,0
300 323,9 540 172 164 324 M20x50 25x10 M24x45 88,9 26,2
350 355,6 572 175 164 356 89,7 27,0
400 406,4 628 179 170 407 119,8 36,3
1270 1495 2054 200 M24x60
500 508,0 728 175 167 508 122,9 39,4
Insulation
Type
group
FB
FS 2
TP
Position 1 2 3 4 5 6 7
FB 2 2 2 4 2 2 8
Piece FS 2 2 2 4 2 2 -
TP - - 2 4 2 2 -
Bracket Pipe clamp Stop lug Bolt
Pipe Cantilever DIN1026 Plate 10 mm H790 Flat bar EN24017 Weight
EN10029 Type RSA DIN1017 Nut kg / piece
U120 U100 EN24032
DN Da a e l1 l2 b c f d1 Bolt FB TP
200 219,1 516 222 209 220 M16x45 88,8 26,0
250 273,0 570 905 1130 1538 150 215 205 273 91,4 28,5
300 323,9 630 212 204 324 M20x50 25x10 M24x45 92,5 29,7
350 355,6 656 215 205 356 93,5 30,5
400 406,4 708 219 210 407 123,7 40,1
1270 1495 2054 200 M24x60
500 508,0 808 215 207 508 126,8 43,2
Edition: 2000-07
H 720 W
Page 14
l1
400
150
7
26 6
10
reference altitude
1
50 200 100
45°
p vert. £ 50 kN
p horiz. £ 7 kN 2
e
l2
60
50
283
70
f
4
25
b 3
400
10
c
25
vessel axis
a
DN
Edition: 2000-07
H 720 W
Page 15
Insulation
Type
group
FB
FS 1
TP
Position 1 2 3 4 5 6 7
FB 2 2 2 4 2 2 8
Piece FS 2 2 2 4 2 2 -
TP - - 2 4 2 2 -
Bracket Pipe clamp Stop lug Bolt
Pipe Cantilever DIN1026 Plate 10 mm H790 Flat bar EN24017 Weight
EN10029 Type RSA DIN1017 Nut kg / piece
U120 U120 EN24032
DN Da a e l1 l2 b c f d1 Bolt FB TP
600 610 830 181 173 610 147,4 50,0
1225 1600 2062 250 M24x70
700 711 932 177 171 712 157,9 53,6
800 813 1034 183 176 813 25x10 M24x45 181,7 59,8
900 914 1136 1605 1980 2600 300 178 172 915 M24x75 190,1 68,1
1000 1016 1236 177 172 1016 194,1 72,2
Insulation
Type
group
FB
FS 2
TP
Position 1 2 3 4 5 6 7
FB 2 2 2 4 2 2 8
Piece FS 2 2 2 4 2 2 -
TP - - 2 4 2 2 -
Bracket Pipe clamp Stop lug Bolt
Pipe Cantilever DIN1026 Plate 10 mm H790 Flat bar EN24017 Weight
EN10029 Type RSA DIN1017 Nut kg / piece
U120 U120 EN24032
DN Da a e l1 l2 b c f d1 Bolt FB TP
600 610 910 221 213 610 151,8 54,5
1225 1600 2062 250 M24x70
700 711 1012 217 211 712 155,2 58,0
800 813 1114 223 216 813 25x10 M24x45 186,3 64,5
900 914 1214 1605 1980 2600 300 218 212 915 M24x75 194,6 72,6
1000 1016 1316 217 212 1016 198,8 76,7
Edition: 2000-07
Standard
Anchors
Part No. 7 7 0 1) 2) 3) H 770
Page 1 of 10
Partnumber
770SA-23W M10/20 Segmental Anchor
H770 cert. 2.2 Steel galvanized
Partnumbering Code
Position of Part No.
1. - 3. 4. - 6. 7. - 8. 9.
1) 2) 3)
Kind of Part Item / Type Material Certificate
Cd. Cd. Cd. Cd.
Universal Anchor UD- Polyamid PA 2.2 W
Fastening 770 Impact Anchor KD-
Elementes from Undercut Anchor SC- Galvanized 23
Manufacturers Segmental Anchor SA- steel
Systems Through Fastening ST-
Anchor
High Loading Anchor SL-
High Loading Anchor SLB
with indicator cap nut
Adhesive Anchor VA-
Impact Anchor KDR
stainless A4-70 79
Undercut Anchor SCR
stainless
Through Fastening STR
Anchor stainless
Adhesive Anchor VAR
stainless
3) Certificate acc. to EN10204 (DIN50049) / Code for certificate acc. to VAI-Std. H0009
Page 2
Application range
Small edge
Loading Suitable for Suitable for Shallow distance and
Anchor - Type capacity through tension zones setting depth spacing
fastening between
anchors
Universal Anchor UD-
low
medium yes
Remark:
Additional to the choice of fastening types shall be considered:
Quality of concrete, thickness of wall, distance to edge of wall and to the next anchor hole,
tension and compressive zone, static load or dynamic load, corrosion and other determetive factors to
manufacturers guide line.
For exact design and dimensioning of anchorage manufacturers anchor specification and approvals
by building authorities are obligatory.
Edition: 99-07
H 770
Page 3
Item Type
Universal Anchor UD-
BT
D
d
Q
X min = 1 d L
Tensile Shear
Nom. diam. Anchor Hole Screw working load working load
=Hole diam. lenght depth shank diam. Z max. 1) Q max. 1)
D L BT d kN kN
5 25 35 4 0,30 0,40
6 30 40 5 0,55 0,90
8 40 55 6 0,85 1,25
10 50 65 8 1,40 2,20
12 60 80 10 2,00 3,00
14 70 90 12 3,00 5,60
Edition: 99-07
H 770
Page 4
Item Type
Impact Anchor Galvanized steel KD-
Stainless steel KDR
SM
LG
Md Z
D
max.
Ts
L
1) Recommended limiting value in concrete ³ B25 (DIN), B300 (ÖNORM) for predominant static load
in the compressive and tension zone.
Values in parantheses are valid for tension zone
Edition: 99-07
H 770
Page 5
Item Type
Undercut Anchor Galvanized steel SC-
Stainless steel SCR
Tmin
Md
D
max Z
TS
BT
SM
1) Recommended limiting value in concrete ³ B25 (DIN), B300 (ÖNORM) for predominant static load
in the compressive and tension zone.
For proofed compressive zone the values are to multiply with a factor of 1,7.
Edition: 99-07
H 770
Page 6
Item Type
Segmental Anchor 2) (galvanized steel) SA-
LG
Md
D
max
Z
D1
T min S max
Q
B T min
SM
1) Recommended limiting value in concrete ³ B25 (DIN), B300 (ÖNORM) for predominant static load
in the compressive and tension zone.
Edition: 99-07
H 770
Page 7
Item Type
Through Fastening Anchor 2) (Galvanized steel) ST-
LG
Md
D
max
Z
D1
T min S max
Q
B T min
SM
1) Recommended limiting value in concrete ³ B25 (DIN), B300 (ÖNORM) for predominant static load
in the compressive and tension zone.
If used in concrete with cracks values are to be multiply with a factor of 0,6.
Edition: 99-07
H 770
Page 8
Item Type
Through Fastening Anchor 2) (Stainless steel) STR
LG
Md
D
max
Z
D1
T min S max
Q
B T min
SM
1) Recommended limiting value in concrete ³ B25 (DIN), B300 (ÖNORM) for predominant static load
in the compressive and tension zone.
If used in concrete with cracks values are to be multiply with a factor of 0,6.
Edition: 99-07
H 770
Page 9
Item Type
High Loading Anchor 2) with screw SL-
with screw and indicator cap nut SLB
Material input (MTO) in RODIKS: Example for thread dimension M16, max. thickness fastened 25:
Example: SHCD DN1 ABM1 ABM2 Partnumber
XB 0 16 25 770SL-23W
L
S max
D1
M d max
Z
D
T min
h
BT
SM
Edition: 99-07
H 770
Page 10
Item Type
Adhesive Anchor 2) Galvanized steel VA-
Stainless steel VAR
Md
max
D
Q
D1
BT T min S max
SM
Edition: 99-07
Standard
Supports for Hydraulics
for DIN - Application H 780
Page 1 of 15
Example of Designation of a round bar clamp DIN 3570, form A with self locking hexagon nuts,
Designation: for nominal diameter DN50, with certificate 2.1, material: USt37-2, galvanized
Part Number
780-FN28B 50 Round bar clamp Form A USt37-2 galvanized
+ 2 Nuts H780 / DIN3570 cert: 2.1
Page 2
Footnotes:
2) Materials:
Steel Rm ³ 350 MPa acc. to manufacturer's standard
St33 / USt37-2 / UQSt37-2 acc. to DIN17100 (DIN EN10025)
Galvanizing: Single parts with thread acc. to ISO4042 / A3E
Single parts without thread acc. to DIN50961/severity level 2
Polyamide 6 acc. to DIN16773-1 (up to 120°C)
Polypropylene acc. to DIN16774-1
Aluminium (Rm ³ 180 N/mm²) acc. to manufacturers standard (up to max. 300 °C)
Austenite Steel acc. to DIN17440
Nut Material 5 acc. to DIN267 (ISO 898)
Bolt material 8.8 acc. to DIN EN20898-1
Bolt material, Nut material A2-70 and A4-70 acc. to DIN267 / Part 5 (ISO3506)
A2-50 and A4-50 acc. to DIN267 / Part 5 (ISO3506)
W1, W4 and W5 acc. to DIN72571 respective DIN72573
4) When using stacking- or combi clamps for steel pipes it is to verify that the selected
flange connection does not collide with the next pipe.
6) Supports for hydraulics for ANSI- / ASME-Pipes & Tubes see VAI-Std. H780A.
7) Internal surface with elastomer insert (sound damping, vibration damping) only for
material code PA, PN and PP.
Material of insert acc. to manufacturers standard (e.g. NBR), however applicable up to max. 90°C.
Manufacturers dimensions (see page 12 to 15) may slightly deviate from the standard dimensions.
Edition: 2007-01
H 780
Page 3
Materials:
St33 or UQSt37-2 Material code 23
St33 or UQSt37-2 galvanized Material code 29
Austenitic Steel Material code 70
1.4571 Material code 73
sh2
d1
h1
r1
r2
l1 p
d2
l2
Dimensions in mm
1) Tube Weight
Type- outside d1 d2 b h1 h2 l1 l2 r1 r2 s Rectiv. Bolt p kg / 1000
Code diameter Length pieces
6 7 5 4 26 14 35 8,3
16
8 9 6 5 28 16 40 9,5
10,12 13 6,6 9 7 30 18 2,5 2 47 M6 14,2
Light 14,15 15,5 20 12 10 32 20 55 16,7
Tube 16,18 19 15 13 34 22 2,5 62 1,25 18,9
Clip 20,22 23 19 15 43 28 77 43,8
DIN1596 25 26 22 18 44 29 85 48,5
9 25 M8
28 28,5 24 20 47 32 92 52,7
LSP 30 31 27 23 47 32 4 3 98 56,2
35 36 32 26 57 40 117 80,4
38 39 11 30 34 28 59 42 4 123 M10 2 84,7
42 43 38 32 61 44 133 91,7
6 7 16 5 4 22 14 2,5 31 7,3
6,6 2 M6
8 9 20 6 5 27 18 38 11,4
10,12 13 9 7 40 25 1,6 56 0,8 30,7
Heavy 4
14,15 15,5 11 25 12 10 41 26 3 63 M10 34,6
Tube
16,18 19 15 13 43 28 71 39,6
Clip
20,22 23 19 15 51 35 85 94
DIN1592
25 26 22 18 52 36 94 105
30
SSP 28 28,5 24 20 53 37 97 108
14 5 2,5 5 M12 1,25
30 31 27 23 55 39 106 119
35 36 32 26 57 41 116 176
40
38 39 34 28 59 43 122 185
Edition: 2007-01
H 780
Page 4
Materials:
W1 (Steel galvanized) Material code 27
W4 (Austenitic Steel) Material code 75
W5 (1.4401, 1.4436 or 1.4571) Material code 77
h2
d1
h1
s
l2
d2
l1
Dimensions in mm
1) 3)
Type- Outside Weight
Code diameter b d2 h1 h2 l1 l2 s kg / 1000
d1 ±0,2 +0,2 ±0,2 ±0,2 ±0,3 ±0,2 ±0,1 pieces
0
4 3,5 3 18 9 1,69
5 4,5 4 18,5 9 1,92
6 5,5 5 20 10 2,08
10 4,8 1
(7) 6,5 5 20,5 10 2,16
8 7,5 6 22 11 2,39
10 9,5 7 23 11 2,71
L1P
12 11,3 8 30,5 16 6,11
15 5,8 14,3 10 34 18 7,11
16 15,3 11 35 18 7,20
12 1,5
18 17,3 13 35,5 18 7,95
20 7 19,3 14 37,5 19 8,52
22 21,3 16 39,5 20 9,22
Edition: 2007-01
H 780
Page 5
Materials:
W1 (Steel galvanized) Material code 27
W4 (Austenitic Steel) Material code 75
W5 (1.4401, 1.4436 or 1.4571) Material code 77
s
h1
d1
Stiffening corrugation
only at tube clamp for
a 4 and more lines.
d2
l2 b
l1
Dimensions in mm
1) 3)
Weight
Type- For Lines a b d2 h1 l1 l2 s
kg / 1000
Code Diameter +1 ±0,2 +0,2 ±0,2 ±0,3 ±0,2 ±0,1
Number pieces
d1 0 0
5 10,5 4,5 35 23 3,14
6 12,5 5,5 38 26 3,38
(7) 14,5 10 4,8 6,5 39 27 1 3,69
8 16,5 7,5 42 30 4,08
10 20,5 9,5 44 32 4,55
L2P 2 12 24,5 11,3 58 44 10,2
15 30,5 5,8 14,3 66 52 12,1
16 32,5 15,3 66 52 12,3
12 1,5
18 36,5 17,3 69 55 13,2
20 40,5 7 19,3 73 59 14,2
22 44,5 21,3 77 63 15,2
4 12,5 3,5 39 27 3,38
5 15,5 4,5 41 29 3,61
6 18,5 5,5 45 33 4,08
10 4,8 1
(7) 21,5 6,5 47 35 4,32
8 24,5 7,5 51 39 4,79
10 30,5 9,5 55 43 5,34
L3P 3
12 36,5 11,3 71 57 12,1
15 45,5 5,8 14,3 81 67 14,2
16 48,5 15,3 81 67 14,5
12 1,5
18 54,5 17,3 87 73 15,8
20 60,5 7 19,3 93 79 17,0
22 66,5 21,3 99 85 18,3
Edition: 2007-01
H 780
Page 6
Dimensions in mm
1) 3)
d h1 l1 l2 s Weight
Type- For Lines a d2
kg / 1000
Code Number Diameter +1 ±0,2 +0,2 ±0,2 ±0,3 ±0,2 ±0,1
pieces
d1 0 0
4 17 3,5 44 32 3,77
5 21 4,5 46 34 4,00
6 25 5,5 51 39 4,55
10 4,8 1
(7) 29 6,5 54 42 4,79
8 33 7,5 59 47 5,41
L4P 4
10 41 9,5 67 55 6,28
12 49 14,3 83 69 13,8
15 61 5,8 15,3 95 81 16,2
12 1,5
16 65 17,3 95 81 16,6
18 73 7 19,3 105 91 18,3
4 21 3,5 48 36 4,08
5 26 4,5 53 41 4,64
6 31 5,5 57 45 5,03
10 4,8 1
L5P 5 (7) 36 6,5 63 51 5,18
8 41 7,5 68 56 6,13
10 51 9,5 77 65 7,06
12 61 12 5,8 11,3 95 81 1,5 15,5
4 25 3,5 52 40 4,40
5 31 4,5 58 46 4,95
6 37 5,5 64 52 5,58
L6P 6 10 4,8 1
(7) 43 6,5 72 60 6,28
8 49 7,5 76 64 6,75
10 61 9,5 90 78 8,09
4 29,5 3,5 56 44 4,72
5 36,5 4,5 64 52 5,41
L7P 7 6 43,5 10 4,8 5,5 72 60 1 6,21
(7) 50,5 6,5 78 66 6,75
8 57,5 7,5 86 74 7,54
4 33,5 3,5 60 48 5,03
5 41,5 4,5 68 56 5,74
L8P 8 10 4,8 1
6 49,5 5,5 76 64 6,52
(7) 57,5 6,5 85 73 7,31
Edition: 2007-01
H 780
Page 7
Materials:
Code Clamp Nut
24 USt37-2 Material class 5, Product class A £ M16
Material class 5, Product class B > M16
28 USt37-2 galvanized Material class 5, Product class as above
70 Austenitic Steel A2-70 or A4-70
73 1.4571 / 1.4401 A4-70
d2
DN
max. 10
h
b
d3 e
a
Dimensions in mm
10 *) 17,2 28 35 8 M8 20 60 8,2
15 *) 21,3 35 25 65 10,4
20 26,9 40 40 30 70 11,5
25 33,7 48 10 M10 38 76 12,6
32 42,4 56 46 86 14,1
40 48,3 62 52 92 15,0
50 60,3 76 50 64 109 25,6
65 76,1 94 12 M12 82 125 29,3
80 88,9 106 94 138 32,2
-FN
100 114,3 136 120 171 70,8
125 139,7 164 60 16 M16 148 191 79,5
150 168,3 192 176 217 90,2
200 219,1 248 228 283 182,8
250 273,0 302 20 M20 282 334 215,8
300 323,9 352 332 385 248
70
350 355,6 402 378 435 402
400 406,4 452 24 M24 428 487 449
500 508,0 554 530 589 542
Edition: 2007-01
H 780
Page 8
Materials: 2)
Exact specifications see part list on page 9
l1
e1
4
3
3
d
h3
2
h1
h2
3
l2 30
Dimensions in mm
Tube Weight
Nom. DIN Hexagon Hexagon
outside socket kg / piece
Diam. Clamp e1 h1 h2 h3 l1 l2 head
diameter head cap Material
DN Size bolt screw
d1 PP AL
Type Code LNP for tubes 1)
6
8
1 20 27 16,5 33 37 36 M6x30 M6x20 0,08 0,08
10
12
15
2 26 33 19,5 39 42 42 M6x35 M6x25 0,12 0,12
18
22 3 33 35 20,5 41 50 50 M6x40 M6x30 0,14 0,14
28 4 40 42 24 48 59 60 M6x45 M6x35 0,15 0,15
35
5 52 58 32 64 71 71 M6x60 M6x50 0,19 0,19
42
Edition: 2007-01
H 780
Page 9
Materials: 2)
3
h2
- Polypropylene: Code PP, PN, PV
d - Aluminium: Code AL, AA, AS, AN,AV
2
Stacking Bolt (Pos. 6):
12 min. 8
1
SW 11
h4
M6
M6
5 d
l5 14
h2
Edition: 2007-01
H 780
Page 10
s2
-Polyamide: Code PA, PS
-Polypropylene:Code PP, PN
-Aluminium: Code AL, AA,
d
AS, AN, AV
h3
h1
2
h2
s2
l2 b1
Dimensions in mm
Edition: 2007-01
H 780
Page 11
h2
- Aluminium: Code AL, AA, AS, AN,AV
d
2
Stacking Bolt (Pos. 6):
l6 t3
SW
h4
s2
Ød6
Further
Ød6
positions see
5 d
normal clamp
l4 l5
page 10
h2
DIN d6 l4 l5 l6 t3
s2
Clamp Size
6 1 24
Table for Tubes: Dimensions in mm 2 M10 40 26 15 15
3 50
1) Tube DIN Weight
outside
h2 h4 Dim. 4 M12 81 27 18 16
Type- diameter Clamp kg / pcs.
Code Size in mm 5 M16 110 36 24 19
d SAP SKP 6 M20 151 51 30 31
6 Table for pipes with ISO-Outside diameter: 4)
8 Tube
1) DIN Weight
10 Nom. outside
h2 h4 kg / piece
1 24 40 0,24 0,61 Type- diameter
Clamp
12 Diam. Size
Code d
Stacking 14 SAN SKN
Clamp
SAP 16 10 17,2 1 24 40 0,24 0,61
18 15 21,3
2 32 56 0,32 0,80
20 Stacking 20 26,3
Clamp
Combi 22 25 33,7 3 38 68 0,40 0,98
Clamp 2 32 56 0,32 0,80 SAN
25 32 42,4
SKP 4 54,5 99 0,94 2,34
28 Combi 40 48,3
30 Clamp 50 60,3
35 SKN 65 76,1
3 38 68 0,40 0,98 5 70 130 1,74 4,34
38 80 88,9
42 100 114,3 6 99 183 4,20 10,7
Part List: for Normal-, Stacking und Combi Clamps
Number of pcs.
Material for Code for type
Pos. Designation
SNN SKN SAN
PA PP PV AV AL PS PN AN AA AS SNP SKP SAP
1 Basic plate Steel Rm ³ 350 MPa 1.4401 / 1.4571 Austenit. Steel *) 1 1 -
2 Clamp shell Polyam. 6 Polypropylene Aluminium Polyam. 6 Polyprop. Aluminium 2 4 2
Steel Steel Aust.
3 Cover plate - 1.4401 / 1.4571 - - 1 1 -
Rm ³ 350 MPa galvanized Steel *)
Hexagon head bolt 8.8 A2-70
8.8 - A4-70 - - 2 2 -
acc. to DIN EN24014 galvanized **)
4 Hexagon socket head
cap screw according A2-70
- - 8.8 - A4-70 - 2 2 -
to DIN EN ISO4762 **)
Page 12
Normal Clamp with Insert made of Elastomer - Light Series 5) acc. to DIN3015-1
l1
e1
3
3
d d8
h3
2
h1
7
h2
3
l2
30
Dimensions in mm
Tube Hexagon
Nominal DIN d8
outside e1 h1 h2 h3 l1 l2 head screw Weight
Diam. Clamp
diameter ±1 DIN kg / piece
DN Size
d EN24014
Edition: 2007-01
H 780
Page 13
h2
12 min. SW 11 8
2
M6
M6
1
h4
l5 14
7
h2
6
Table for Tubes: Table for pipes with ISO-Outside diameter: 4)
Dimensions in mm Dimensions in mm
Edition: 2007-01
H 780
Page 14
s2
- Polyamide: Code PA
- Polypropylene: Code PP, PN
d8
d
h3
2
h1
7
h2
s2
l2 b1
Dimensions in mm
Tube
Nom. DIN Hexagon head
outside d8 b1 h1 h2 h3 l1 l2 s2 Weight
Diam. Clamp e1 bolt
diameter kg / piece
DN Size DIN EN24014
d
Type code SDP for Tubes 1)
6
8
10
12 2 25 30 45 48 32 64 70 86 8 M10x60 0,48
14
15
16
18
20
22
25 3 38 30 60 60 38 76 85 100 8 M10x70 0,58
28
30
35
38
4 64 45 90 89 54,5 109 115 140 10 M12x100 1,4
42
50
60
5 88 60 122 120 70 140 152 180 10 M16x130 2,6
75
90 6 114 80 168 168 99 198 206 226 15 M20x190 6,5
Type code SDN for pipes with ISO-outside diameter 1)
10 17,2 2 25 30 45 48 32 64 70 86 8 M10x60 0,48
15 21,3
3 38 30 60 60 38 76 85 100 8 M10x70 0,58
20 26,9
25 33,7
32 42,4 4 64 45 90 89 54,5 109 115 140 10 M12x100 1,4
40 48,3
50 60,3
5 88 60 122 120 70 140 154 180 10 M16x130 2,6
65 76,1
80 88,9 6 114 80 168 168 99 198 206 226 15 M20x190 6,5
100 114,3 7 150 90 205 200 115 230 251 270 15 M24x220 9,1
125 139,7
150 168,3 Dimensions on request
200 219,1
**) Dimension b4 see page 10
Further Footnotes see page 2
Edition: 2007-01
H 780
Page 15
h2
2
Stacking Bolt (Pos. 6):
l6 t3
h4
s2
Further SW
positions see
Ød6
Ød6
normal clamp
5 page 14
l4 l5
7
h2
DIN d6 l4 l5 l6 t3
s2
Clamp Size
6 2
M10 40
26
15 15
3 50
Table for Tubes: Dimensions in mm 4 M12 81 27 18 16
5 M16 110 36 24 19
1) Tube DIN Weight
outside
h2 h4 Dim. 6 M20 151 51 30 31
Type- diameter Clamp kg / piece
in mm 7 M24 180 60 50 32
Code d Size
SBP SCP
Table for pipes with ISO-Outside diameter: 4)
6
8 Tube
1) DIN Weight
10 Nom. outside
Type- Clamp h2 h4 kg / piece
12 2 32 56 0,32 0,80 Diam diameter
Code d Size
Stacking 14 SAN SKN
Clamp
16 10 17,2 2 32 56 0,32 0,80
SBP
18 15 21,3
3 38 68 0,40 0,98
20 Stacking 20 26,3
Clamp
Combi 22 25 33,7
SBN
Clamp 25 3 38 68 0,40 0,98 32 42,4 4 54,5 99 0,94 2,34
SCP 28 40 48,3
Combi
30 Clamp 50 60,3
5 70 130 1,74 4,34
35 SCN 65 76,1
38 4 53,5 97 0,94 2,34 80 88,9 6 99 183 4,20 10,7
42 100 114,3 7 115 215
Part List: for Normal-, Stacking und Combi Clamps
Number of pieces
Material for Code for type
Pos. Designation
SDN SCN SBN
PA PP PN SDP SCP SBP
1 Basic plate Steel Rm ³ 350 MPa 1.4401 / 1.4571 1 1 -
2 Clamp shell Polyamide 6 Polypropylene Polypropylene 2 4 2
3 Cover plate Steel Rm ³ 350 MPa 1.4401 / 1.4571 1 1 -
4 Hexagon head bolt acc. DIN EN24014 8.8 A4-70 2 2 -
5 Safety locking plate Steel Rm ³ 350 MPa 1.4401 / 1.4571 - 1 1
6 Stacking bolt with washer DIN433 8.8 A4-70 - 2 2
Insert made of elastomer
7 NBR or similar 1 1 1
(sound damping)
- Application temperature °C up to 90 -
Footnotes see page 2
Edition: 2007-01
Standard
Component Parts
Survey
Insulating Shim
KBA for
KBB Pipes
KBC
K6A,B,C,D
K7A,B,C,D
K8A,B,C,D Insulating Shim
for Part 5
brackets
K6E,F
K7E,F
K8E,F
Page 2
Survey
HLA
Hanger Lugs
HLB
HLC
Part 6
GB- Clevis
SS- Turnbuckle
Edition: 98-10
Standard
Pipe Straps 4)
Partnumber
790BN-14W 150 U-bolt (DIN)
H790 cert. 2.2 S235 JR
Partnumbering Code
Position of Part No.
1. - 3. 4. - 6. 7. - 8. 9.
1) 2) 3)
Kind of Part Item / Type Material Certificate
Code Cd. Cd. Code
U-bolt BN- 2.2 W
Componet parts (DIN) S235 JR 14
for 790 Flat bar strap BF-
piping supports
U-bolt BA- 1.4541 72
(stainless) 1.4571 73
3) Certificate acc. to EN10204 (DIN50049) / Code for certificate acc. to VAI-Std. H0009
4) This part no. is only applicable for items which are ordered according to this standard.
If items of this standard are component parts of complete supports (e.g. acc.to H710,711,720 or equivalent),
the part numbers of those supports including their requirements to material and certificate are valid.
Page 2
Item Type
U-Bolt (Standard U-bolt acc. to DIN) BN-
DN
a
h1
s2
s1
b
d2
e
Position 1 2
Piece 1 4
Round
Pipe bar Nut Weight
a b h1 e s1 *) s2 DIN1013 EN24032 kg / 100 pcs.
DN max. max. d2
15 24 65 35 14 21 13
20 30 40 70 40 13 20 14
25 38 76 48 12 19 M10 15
32 46 86 56 14 20 16,5
40 52 92 62 14 20 17,5
50 64 50 109 76 12 20 29
65 82 125 94 12 20 M12 33
80 94 138 106 12 20 35,5
100 120 171 136 10 19 77,5
125 148 60 191 164 - 12 M16 86
150 176 217 192 - 10 96,5
200 228 283 248 - 16 196
250 282 334 302 - 13 M20 229
300 332 70 385 352 - 14 261
350 378 435 402 - 17 426
400 428 487 452 - 18 M24 473
500 530 589 554 - 18 566
Edition: 90-10
H 790 Part 2
Page 3
Item Type
Flat bar Strap BF-
t
2
s
h2
DN
h1
a 45°
c
s1
f
b
d2
3 1
e
Position 1 2 3
Piece 2 1 4
Round Flat bar
Pipe bar DIN1017 Nut Weight
a b e h1 h2 f c s 1 DIN1013 5) EN24032 kg / piece
DN max. d2 t s l
150 176 192 230 140 20 377 1,7
200 228 80 244 280 190 140 50 19 M16 50 8 507 M16 2,1
250 282 298 340 250 25 657 2,5
300 332 352 400 280 27 746 3,8
350 378 100 398 430 310 200 80 25 M20 60 8 832 M20 4,2
400 428 448 480 360 24 911 4,7
500 530 550 590 470 33 1239 5,7
600 635 659 710 560 41 1477 11,3
700 735 120 759 810 660 270 120 40 M24 80 10 1735 M24 12,9
800 835 859 910 760 38 1992 14,5
900 935 150 965 1020 840 330 150 38 M30 100 10 2209 M30 21,4
1000 1035 1065 1120 940 36 2466 23,4
5) l = total length
Edition: 98--10
H 790 Part 2
Page 4
Item Type
U-Bolt (stainless) BA-
DN
a
h1
s2
s1
b
d2
e
Position 1 2
Piece 1 4
Round
Pipe bar Nut Weight
a b h1 e s1 *) s2 DIN1013 EN24032 kg / 100 pcs.
DN max. max. d2
15 27 65 35 19 25 7,5
20 32 40 70 40 18 24 8,1
25 40 76 48 17 23 M8 8,8
32 48 86 56 19 24 9,8
40 54 92 62 19 24 10,3
50 66 50 109 76 19 25 19,9
65 84 125 94 19 25 M10 22,5
80 96 138 106 19 25 24,5
100 124 60 171 136 22 27 M12 31,9
125 152 191 164 14 20 35,3
Edition: 90-10
Standard
Pipe Clamps 4)
Example of Designation of a pipe clamp form A with nominal diameter 150, material 15Mo3
Designation: with certificate 3.1B
Partnumber
790RSA411 150 Pipe clamp A
H790 cert. 3.1B 15Mo3
Partnumbering Code
Position of Part No.
1. - 3. 4. - 6. 7. - 8. 9.
1) 2) 3)
Kind of Part Item / Type Material Certificate
Cd. Cd. Cd. Code
Pipe clamp RSA S235 JR 14 2.2 W
Component parts Form A 1.4541 72
for 790 Pipe clamp RSB H II 32
piping supports Form B TStE 255 38 3.1B 1
Pipe clamp RSC 15Mo3 41
Form A (DN = Di) 13CrMo44 42
3) Certificate acc. to EN10204 (DIN50049) / Code for certificate acc. to VAI-Std. H0009
4) This part no. is only applicable for items which are ordered according to this standard.
If items of this standard are component parts of complete supports (e.g. acc.to H710,711,720 or equivalent),
the part numbers of those supports including their requirements to material and certificate are valid.
Page 2
Item Type
Pipe Clamp, Form A RSA
Pipe Clamp, Form B RSB
RSA RSB
c
d2
c
b
2
d1 a
d1
1
a
r
d2
r
f
c
f
Position 1 2
Piece RSA 1 2
RSB 1 3
Total length Bolt Weight
Pipe Pipe clamp Flat bar of a half EN24017 kg / piece
DIN1017 clamp Nut
DN EN24032
d1 a b c d2 f r RSA RSB RSA RSB
15 1/2" 22 50 12 9 78 124 M8x30 0,21 0,34
20 3/4" 27 *) 66 103 149 0,30 0,44
25 1" 34 *) 72 46 15 11,5 7 4 30 x 5 112 158 M10x30 0,32 0,46
32 1 1/4" 43 *) 82 127 173 0,36 0,50
40 1 1/2" 49 *) 88 136 182 0,38 0,52
50 2" 61 *) 108 166 220 0,71 0,96
65 2 1/2" 77 *) 122 54 18 14 9 6 40 x 6 187 241 M12x35 0,79 1,04
80 3" 89 *) 136 208 262 0,87 1,12
100 4" 115 *) 178 273 343 1,91 2,44
125 5" 140 *) 204 70 24 18 11 6 50 x 8 314 384 M16x45 2,16 2,70
150 6" 169 *) 232 358 428 2,44 2,97
200 8" 220 *) 284 437 507 2,93 3,47
250 10" 273 *) 348 538 624 4,40 5,22
300 12" 324 *) 398 86 30 23 14 8 60 x 8 621 707 M20x50 5,03 5,85
350 14" 356 *) 432 669 755 5,39 6,21
400 16" 407 *) 498 772 876 9,12 10,58
450 18" 457 550 18 8 70 x 10 855 959 M24x60 10,03 11,49
500 20" 508 *) 600 928 1032 10,83 12,29
600 24" 610 704 1091 1195 14,4 16,0
700 28" 712 804 22 80 x 10 1242 1346 M24x70 16,3 17,9
800 32" 813 905 104 36 27 1407 1511 18,4 20,0
900 36" 915 1007 10 1560 - 22,8 -
1000 40" 1016 1108 28 90 x 10 1711 - M24x75 24,9 -
1100 44" 1120 1212 1887 - 27,5 -
1200 48" 1220 1312 32 120 x 10 2039 - M24x80 39,2 -
1300 52" 1320 1412 2191 - 42,0 -
Edition: 98-10
H 790 Part 3
Page 3
Item Type
Pipe Clamp, Form A (DN = Di) RSC
RSC
c
2
d1
a
1
r
d2
f c
Position 1 2
Piece 1 2
Total Bolt
Pipe Pipe clamp Flat bar length EN24017 Weight
DIN1017 of a half Nut kg / piece
clamp EN24032
DN d1 a c d2 f r
15 19 50 12 9 78 M8x30 0,21
20 25 62 99 0,30
25 30 68 15 11,5 7 4 30 x 5 108 M10x30 0,32
32 38 76 121 0,36
40 45 84 132 0,38
50 57 104 162 0,71
65 70 115 18 14 9 6 40 x 6 180 M12x35 0,79
80 85 130 202 0,87
100 108 172 267 1,91
125 133 196 24 18 11 6 50 x 8 306 M16x45 2,16
150 159 222 348 2,44
200 207 270 423 2,93
250 259 334 524 4,40
300 311 386 30 23 14 60 x 8 609 M20x50 5,03
350 363 438 8 675 5,39
400 414 506 18 70 x 10 780 M24x60 9,12
500 517 609 937 10,83
600 613 704 1091 14,4
700 715 804 36 27 22 80 x 10 1242 M24x70 16,3
800 817 905 10 1407 18,4
900 911 1007 28 90 x 10 1560 M24x75 22,8
1000 1012 1108 1711 24,9
Edition: 98--10
H 790 Part 3
Page 4
Edition: 98-10
Standard
Guide Angles 4)
Partnumber
790FWB14W Guide Angle B
H790 cert. 2.2 S235 JR
Partnumbering Code
Position of Part No.
1. - 3. 4. - 6. 7. - 8. 9.
1) 2) 3)
Kind of Part Item / Type Material Certificate
Cd. Cd. Cd. Code
Guide Angle A FWA S235 JR 14 2.2 W
Componet parts
for 790 Guide Angle B FWB
piping supports
Guide Angle C FWC
3) Certificate acc. to EN10204 (DIN50049) / Code for certificate acc. to VAI-Std. H0009
4) This part no. is only applicable for items which are ordered according to this standard.
If items of this standard are component parts of complete supports (e.g. acc.to H710,711,720 or equivalent),
the part numbers of those supports including their requirements to material and certificate are valid.
Page 2
Item Type
Guide Angle, Dimension A FWA
Guide Angle, Dimension B FWB
Guide Angle, Dimension C FWC
45°
Edition: 98-10
Standard
Insulating Shims 4)
Example of Designation of an insulating shim for a pipe with nominal diameter 150
Designation: from hardwood, with certificate 2.1
Partnumber
790KBAHHB 150 Insulating shim insulating group 6
H790 cert. 2.1 hardwood
Partnumbering Code
Position of Part No.
1. - 3. 4. - 6. 7. - 8. 9.
1) 2) 3)
Kind of Part Item / Type Material Certificate
Code Cd. Cd. Code
Insulating shim 5) Hardwood HH 2.1 B
Component parts for pipe
for 790 Insulating shim 5)
piping supports for brackets
Insulating shim 5)
for stanchions
3) Certificate acc. to EN10204 (DIN50049) / Code for certificate acc. to VAI-Std. H0009
4) This part no. is only applicable for items which are ordered according to this standard.
If items of this standard are component parts of complete supports (e.g. acc.to H710,711,720 or equivalent),
the part numbers of those supports including their requirements to material and certificate are valid.
Page 2
Item Type
Insulating Shim for pipes, insulation group 6 KBA
Insulating Shim for pipes, insulation group 7 KBB
Insulating Shim for pipes, insulation group 8 KBC
140°
di
d1 b
Type Weight
Pipe kg / 100 pcs.
DN da KB. di d1 b s
A 49 30 13,5 2,46
15 21,3 B 22 61 40 19,5 5,54
C 77 40 27,5 9,31
A 61 40 17,0 5,12
20 26,9 B 27 77 40 25,0 8,89
C 89 40 31,0 12,30
A 77 40 21,5 8,16
25 33,7 B 34 89 40 27,5 11,75
C 115 50 40,5 25,80
A 89 40 23,0 10,39
32 42,4 B 43 115 50 36,0 24,32
C 115 50 36,0 24,32
A 89 40 20,0 9,44
40 48,3 B 49 115 50 33,0 23,14
C 140 50 45,5 36,77
A 115 50 27,0 20,32
50 60,3 B 61 140 50 39,5 33,95
C 169 50 54,0 53,11
A 115 50 19,0 15,60
65 76,1 B 77 140 50 31,5 29,23
C 169 50 46,0 48,39
A 140 50 25,5 24,97
80 88,9 B 89 169 50 50,0 44,13
C 220 50 65,5 86,55
A 169 50 27,0 32,79
100 114,3 B 115 220 50 52,5 75,21
C 273 60 79,0 157,28
A 220 50 40,0 61,58
125 139,7 B 140 273 60 66,5 140,93
C 273 60 66,5 140,93
A 220 50 25,5 42,42
150 168,3 B 169 273 60 52,0 117,94
C 324 60 77,5 196,05
Edition: 98-10
H 790 Part 5
Page 3
Item Type
Insulating Shim for pipes, insulation group 6 KBA
Insulating Shim for pipes, insulation group 7 KBB
Insulating Shim for pipes, insulation group 8 KBC
Edition: 98--10
H 790 Part 5
Page 4
Item Type
Insulating Shim for brackets, insulation group 6 K6A,B,C,D
Insulating Shim for brackets, insulation group 7 K7A,B,C,D
Insulating Shim for brackets, insulation group 8 K8A,B,C,D
b
f
a c
Type Weight
kg / piece
a b c d e f
A 200 200 20 150 100 1,28
K6 B 230 220 40 22 170 160 1,62
C 300 200 26 200 120 1,92
D 300 220 22 200 160 2,12
A 200 200 20 150 100 2,08
K7 B 230 220 65 22 170 160 2,64
C 300 200 26 200 120 3,12
D 300 220 22 200 160 3,44
A 200 200 20 150 100 2,88
K8 B 230 220 90 22 170 160 3,65
C 300 200 26 200 120 4,32
D 300 220 22 200 160 4,76
Edition: 98-10
H 790 Part 5
Page 5
Item Type
Insulating Shim for brackets, insulation group 6 K6E, F
Insulating Shim for brackets, insulation group 7 K7E, F
Insulating Shim for brackets, insulation group 8 K8E, F
e
g
b
d
a c
Type Weight
kg / piece
a b c d e g
K6 E 200 120 40 20 150 40 0,77
F 200 120 20 150 35 0,77
K7 E 200 120 65 20 150 40 1,25
F 200 145 20 150 35 1,51
K8 E 200 120 90 20 150 40 1,73
F 200 170 20 150 35 2,45
Edition: 98--10
H 790 Part 5
Page 6
Item Type
Insulating Shim for stanchions, insulation group 6 K6G, H
Insulating Shim for stanchions, insulation group 7 K7G, H
Insulating Shim for stanchions, insulation group 8 K8G, H
a
a b
Type Weight
kg / piece
a b
K6 G 100 40 0,32
H 120 0,46
K7 G 100 65 0,52
H 120 0,75
K8 G 100 90 0,72
H 120 1,04
Edition: 98-10
Standard
Hanger Component Parts 4)
Partnumber
790SS-32W M16 Turnbuckle
H790 cert. 2.2 C22.8
Partnumbering Code
Position of Part No.
1. - 3. 4. - 6. 7. - 8. 9.
1) 2) 3)
Kind of Part Item / Type Material Certificate
Cd. Cd. Cd. Cd.
Hanger Lug HLA 2.2 W
Component parts Form A S235 JR 14
for 790 Hanger Lug HLB
piping supports Form B
Hanger Lug HLC
Form C
Eye Rod HS-
Welding End with AER
right-hand thread
Welding End with AEL
left-hand thread
Clevis GB- C22.8 32
Turnbuckle with SS-
welding ends
3) Certificate acc. to EN10204 (DIN50049) / Code for certificate acc. to VAI-Std. H0009
4) This part no. is only applicable for items which are ordered according to this standard.
If items of this standard are component parts of complete supports (e.g. acc.to H750),
the part numbers of those supports including their requirements to material and certificate are valid.
Page 2
Item Type
Hanger Lug, Form A HLA
b
d
Edition: 98-10
H 790 Part 6
Page 3
Item Type
Hanger Lug, Form B HLB
d d1
e c e1
Edition: 98--10
H 790 Part 6
Page 4
Item Type
Hanger Lug, Form C HLC
d d d1
e b c e1
Edition: 98-10
H 790 Part 6
Page 5
Item Type
Eye Rod HS-
Welded after
erection
d2
r
s
l1
d1
Erection position
Edition: 98--10
H 790 Part 6
Page 6
Item Type
Clevis GB-
L
d1
D B
A
Edition: 98-10
H 790 Part 6
Page 7
Item Type
Turnbuckle with welding ends SS-
Welding Ends with right-hand thread AER
Welding Ends with left-hand thread AEL
1
2
3 l1
c
left-hand thread right-hand thread
g
f
d
e
z1 h
b
z1 acc. to DIN78
l2
Position 1 2 3
SS- 1 1 1
Piece AER - 1 -
AEL - - 1
Welding Weight
Nom. dim. Turnbucklenut end kg / piece
SS- AER
d l1 c e f g h b l2 AEL
M12 125 75 32 16 21 11 75 150 0,46 0,13
M16 170 105 42 20 28 15 100 200 1,10 0,27
M20 200 125 52 24 35 18 120 220 1,91 0,47
M24 255 145 72 32 45 22 150 260 3,10 0,90
M30 255 145 72 32 45 22 150 260 4,62 1,40
Edition: 98--10
Standard
Concrete Supporting Plates
Part. No 7 9 0 1) 2) 3) H 790 Part 7
Page 1 of 2
Partnumber
790FPC14W Concrete Supporting Plate C
H790 cert. 2.2 S235 JR
Partnumbering Code
Position of Part No.
1. - 3. 4. - 6. 7. - 8. 9.
1) 2) 3)
Kind of Part Item / Type Material Certificate
Cd. Cd. Cd. Cd.
Concrete Supporting FPA S235 JR 14 2.2 W
Component parts Plate, Form A
for 790 Concrete Supporting FPB
piping supports Plate, Form B
Concrete Supporting FPC
Plate, Form C
Concrete Supporting FPD
Plate, Form D
Concrete Supporting FPE
Plate, Form E
3) Certificate acc. to EN10204 (DIN50049) / Code for certificate acc. to VAI-Std. H0009
Page 2
Item Type
Concrete Supporting Plate, Dimensions A FPA
Concrete Supporting Plate, Dimensions B FPB
Concrete Supporting Plate, Dimensions C FPC
Concrete Supporting Plate, Dimensions D FPD
Concrete Supporting Plate, Dimensions E FPE
s
s
e
1
a/2
a/2
f
a
a
e
a/2 e f e e f e
a a a
FPD FPE
s
s
e
e
Detail: Pos. 2
f
f
a
a
f
f
30
e
90°
e
e f f e e f f f e 30 30
a a
Position 1 2
Applicable for Plate Flat bar Weight
supports acc. to Type EN10029 DIN1017 kg / piece
Standard DN s a e f
H730, H738 all FPA 10 180 90 - 60 x 8 x 120 3,5
H710K, W 15 - 150 FPB 12 270 60 150 60 x 8 x 120 7,8
H718W 200 - 500 FPC 12 450 120 210 60 x 8 x 160 21,5
600 - 700 FPD 12 600 120 180 60 x 8 x 160 38,7
800 - 1000 FPE 12 800 115 190 60 x 8 x 160 67,5
Edition: 98-10
Standard
Rolling Material
Part No. 7 9 9 1) 2) 3) 4) H 799
Page 1 of 9
Example of Designation of a angle shape, unequal legs, 60x40x6, material S235 JR,
Designation: with certificate 2.2
Partnumber
799L1412W 60x40x6 Angle shape unequal legs
H799 cert. 2.2 S235 JR
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. - 8. 9.
Type of 1) 2) Nominal
Kind of Part Rolling Material Material dimension Certificate
Cd. Cd. Cd. Cd. 4) Cd.
Plate B S235 JR 14 2.1 B
Rolling Material 799 Flat Bar F S235 JR galvanized 18 2.2 W
I - Beam H TStE 255 38 3) 3.1B 1
Angle Shape, L 15Mo3 41
unequal legs 13CrMo44 42
Round Bar R 1.4541 72
Tee Bar T 1.4571 73
Channel Bar U 1.4306 74
Angle Shape, W 1.4301 75
equal legs 1.4404 78
4) Certificate acc.to EN10204 (DIN50049) / Code for certificate acc. to VAI-Std. H0009
Page 2
Type Code
Plate (1 - 2,5 mm), EN10131 1)
Plate (3 - 30 mm), EN10029 2) B
Embossed Plate, shape R , DIN59220
1) alternativ DIN1541
2) alternativ DIN1543
Edition: 98-10
H 799
Page 3
Tpye Code
Flat Bar, DIN1017 Sheet 1 F
Edition: 98-10
H 799
Page 4
Tpye Code
I - Beam, DIN1025 H
Edition: 98-10
H 799
Page 5
Type Code
Angel Shape, unequal legs, DIN1029 L
11 60x30x5 3,37
12 60x40x6 4,46
13 70x50x6 5,40
14 80x40x6 5,41
15 80x65x8 8,66
21 90x60x8 8,96
22 100x50x8 8,99
23 100x65x9 11,1
24 100x75x9 11,8
25 120x80x10 15,0
31 130x65x10 14,6
32 150x75x9 15,3
33 150x100x10 19,0
34 180x90x10 20,6
35 200x100x12 27,3
Edition: 98-10
H 799
Page 6
Type Code
Round Bar, DIN1013 Part 1 R
Edition: 98-10
H 799
Page 7
Type Code
Tee Bar , DIN1024 T
Edition: 98-10
H 799
Page 8
Type Code
Channel Bar, DIN1026 U
Edition: 98-10
H 799
Page 9
Type Code
Angel Shape, equal legs, DIN1028 W
Edition: 98-10
™
Standard
T Rolling Material
H 799 A
Page 1 of 9
Partnumber
799LW1032 51 x 38 x 4,8 Angle shape unequal legs
H799A ASTM A36
Partnumbering Code
Position of Part No.
1. - 3. 4. 5. - 6. 7. - 8. 9.
Type of 1) 2) Nominal 4)
Kind of Part Rolling Material ASTM - Material dimension Certificate
Cd. Cd. Cd. Cd. Cd.
Plate B A516 Gr.60 A2 ASME 2
Rolling Material 799 Flat Bar F A204 Gr.A A8 ASME H 4)
Beam H A276 Gr.304 C3 3)
Angle Shape, L A276 Gr.316 C4
unequal legs A36 W1
Round Bar R A36 galvanized W2
Tee T A588 Gr.A W3
6)
Channel U A383 Gr.12 2U
Angle Shape W
equal legs
2) Materials
General requirements acc. to ASTM A6
Galvanizing acc. to ISO 1461
6) For this material it is presupposed that a suitable welding procedure will be observed.
Page 2
Type Code
Plate
B
Floor Plate, Pattern No. 4 , ASTM A786
Nominal dimension
Weight
Thickness
Code kg / m²
mm inch
01 3,2 1/8 25,10
02 4,8 3/16 37,70
03 6,4 1/4 50,25
04 7,9 5/16 62,00
ASTM A6 05 9,5 3/8 74,60
06 12,7 1/2 99,70
07 15,9 5/8 125,80
08 19,0 3/4 149,20
09 25,4 1 199,40
10 31,8 1 1/4 249,60
82 4,8 3/16 42,50
ASTM 83 6,4 1/4 55,00
A786 84 7,9 5/16 67,40
85 9,5 3/8 79,90
Edition: 2000-10
T
H 799 A
Page 3
Tpye Code
Flat Bar F
Edition: 2000-10
T
H 799 A
Page 4
Tpye Code
Beam H
Nominal Dimensions
Shapes Code Depth x Weight Width
mm kg / m Depth (Flange)
mm mm
01 100 x 19,3 106 103
02 130 x 23,8 127 127
03 150 x 13,5 150 100
04 150 x 24,0 160 102
05 150 x 22,5 152 152
06 200 x 22,5 206 102
07 200 x 46,1 203 203
08 200 x 59 210 205
W 09 250 x 17,9 251 101
10 250 x 28,4 260 102
11 250 x 58 252 203
12 250 x 89 260 256
13 250 x 131 275 261
14 310 x 21,0 303 101
15 310 x 38,7 310 165
16 310 x 74 310 205
17 310 x 86 310 254
31 75 x 11,2 76 64
32 100 x 14,1 102 71
33 130 x 22 127 83
34 150 x 25,7 152 91
S 35 180 x 29,8 178 98
36 200 x 34 203 106
37 250 x 52 254 126
38 310 x 52 305 129
39 310 x 74 305 139
51 130 x 28,1 127 127
52 150 x 6,5 152 46
M 53 200 x 9,7 203 57
54 250 x 13,4 254 68
55 310 x 17,6 305 78
Edition: 2000-10
T
H 799 A
Page 5
Type Code
Angle Shape, unequal legs L
01 51 x 38 x 3,2 2,1
02 51 x 38 x 4,8 3,1
03 64 x 38 x 4,8 3,6
04 64 x 38 x 6,4 4,8
05 76 x 51 x 6,4 6,1
06 76 x 64 x 7,9 8,3
07 89 x 64 x 7,9 9,0
08 89 x 76 x 9,5 11,7
09 102 x 76 x 9,5 12,6
10 102 x 89 x 9,5 13,5
11 127 x 76 x 9,5 14,5
12 127 x 89 x 9,5 15,4
13 152 x 89 x 9,5 17,3
14 152 x 102 x 9,5 18,2
15 178 x 102 x 9,5 20,2
16 203 x 102 x 12,7 29,0
17 203 x 152 x 12,7 34,1
Edition: 2000-10
T
H 799 A
Page 6
Type Code
Round Bar R
Nominal dimension
Weight
d
Code kg / m
mm inch
01 7,9 5/16 0,38
02 9,5 3/8 0,56
03 12,7 1/2 0,99
04 14,3 9/16 1,26
05 15,9 5/8 1,56
06 19,0 3/4 2,23
07 22,2 7/8 3,04
08 23,8 15/16 3,49
09 25,4 1 3,98
10 31,8 1 1/4 6,23
11 34,9 1 3/8 7,51
12 38,1 1 1/2 8,95
13 50,8 2 15,91
14 63,5 2 1/2 24,86
15 76,2 3 35,80
Edition: 2000-10
T
H 799 A
Page 7
Type Code
Tee T
Dimensions
Nominal
Shapes Code Depth x Weight Width
mm kg / m Depth (Flange)
mm mm
01 38 x 3,6 38,9 38,9
Bar Size 02 51 x 5,4 50,8 50,8
03 64 x 6,8 63,5 63,5
10 75 x 8,9 76,6 101,6
WT 11 100 x 9,7 101,6 101,6
12 130 x 11,2 127,0 101,6
20 100 x 9,2 101,6 101,6
ST 21 130 x 26,0 127,0 127,0
22 150 x 30,3 152,4 133,4
Edition: 2000-10
T
H 799 A
Page 8
Type Code
Channel U
Edition: 2000-10
T
H 799 A
Page 9
Type Code
Angle Shape, equal legs W
01 19 x 19 x 3,2 0,9
02 25 x 25 x 3,2 1,2
03 25 x 25 x 4,8 1,8
04 32 x 32 x 3,2 1,5
05 32 x 32 x 4,8 2,2
06 38 x 38 x 3,2 1,8
07 44 x 44 x 4,8 3,1
08 44 x 44 x 6,4 4,1
09 51 x 51 x 4,8 3,6
10 51 x 51 x 6,4 4,7
11 51 x 51 x 7,9 5,8
12 64 x 64 x 6,4 6,1
13 64 x 64 x 7,9 7,4
14 64 x 64 x 9,5 8,7
15 76 x 76 x 6,4 7,3
16 76 x 76 x 7,9 9,1
17 76 x 76 x 9,5 10,7
18 89 x 89 x 6,4 8,6
19 89 x 89 x 7,9 10,7
20 89 x 89 x 9,5 12,6
21 102 x 102 x 6,4 9,8
22 102 x 102 x 7,9 12,2
23 102 x 102 x 9,5 14,6
24 127 x 127 x 7,9 15,3
25 127 x 127 x 9,5 18,3
26 127 x 127 x 12,7 24,1
27 152 x 152 x 12,7 29,2
28 152 x 152 x 15,9 36,0
29 203 x 203 x 15,9 48,7
30 203 x 203 x 19,0 57,9
31 203 x 203 x 25,4 75,9
41 38 x 38 x 4,8 2,7
42 44 x 44 x 3,2 2,1
43 51 x 51 x 3,2 2,4
44 64 x 64 x 4,8 4,6
45 76 x 76 x 4,8 5,5
46 102 x 102 x 12,7 19,0
Edition: 2000-10
Spectacle Blinds Standard
for ASME B16.5 - Flanges Class 150 - 1500
H800A
Part No. 8 1 2) 3) 1) 0 0 2
Page 1 of 9
Example of Designation of a spectacle blind Class 1500, for flange facing RTJ,
Designation: nominal diameter 10“, material: ASTM A387 Gr.11
Partnumber
81642T002 10“ Spectacle Blind RTJ Class 1500
H800A A387 Gr.11
Partnumbering Code
Position of Part No.
1. - 2. 3. 4. 5. - 6. 7. - 8. 9.
2) 3) 1) Wallthick- 5)
Kind of Part Class Flange facing ASTM - Material nesss Certificate
Cd. Cd. Cd. Cd. Cd. Cd. Cd.
150 1 Raised Face 1 A516 Gr.60 A2 0 0 ASME / 2
Spectacle 81 300 2 A283 Gr.C A7 ANSI
Blind 400 3 Ring Type 4 A662 Gr.A 2L
600 4 Joint RTJ A387 Gr.5 2Q
900 5 Raised Face 9 A387 Gr.11 2T
1500 6 Ra 125 4) A387 Gr.22 2V
A204 Gr.A 2W
A285 Gr.C 5U
Stainless steels
A240 Type 304 1N
A240 Type 304L 1P
A240 Type 316 1Q
A240 Type 316L 1R
4) Roughness Ra 125 (µinch) may also be furnished in the range of Ra 125 (µinch) to Ra 250 (µinch).
Page 2
H
K
B
A
Marking
S
T
Edition: 97-01
H800A
Page 3
Edition: 97-01
H800A
Page 4
Edition: 97-01
H800A
Page 5
Edition: 97-01
H800A
Page 6
D Detail X
F ± 0,2
H
23° ± 1/2°
K
R
B
A
E ± 0,4
P ± 0,13
Marking
Radius R = 0,8 mm for F £ 11,9 mm
Radius R = 1,5 mm for F > 11,9 but £ 23 mm
Radius R = 2,4 mm for F > 23 mm
X
T
P ± 0,13
Edition: 97-01
H800A
Page 7
Edition: 97-01
H800A
Page 8
Edition: 97-01
H800A
Page 9
Edition: 97-01
Standard
Spectacle Blinds
PN6 – 63 for DIN- Pipelines H 810
Page 1 of 10
Example of Designation of a spectacle blind, type A with flat face form C for DN100 and PN40,
Designation: with certificate 3.1B, material: TStE285
Partnumber
8151TB001 100 SPECTACLE BLINDS/C PN40 TSTE285
H810 CERT 3.1B
5) Material for fishplates corresponding to material of blinds. Bolts M20 acc. to VAI-Standard H575;
Thread for fishplates M20. For one flange connection 2 pairs fishplates shall be attached in 180° dephased
position and that in horizontal plane for horizontal pipe lines.
Page 2
Content
Page
1. Scope 3
2. Presumptions
3.1 Manufacture
3.2 Calculation
Edition: 2006-10
H 810
Page 3
1. Scope
This standard shall apply for selection and calculation of spectacle blinds made of plates due to materials
and services.
Standardized groups: PN6 – 40: up to DN600
PN63: up to DN500
2. Presumptions
2.4 Material, design temperatures, strength values and safety factor are given in table below:
st 2)
1 letter of Strength value (N/mm
Material Temperature Safety
piping Material
number °C factor
specification ss sB/100000
Edition: 2006-10
H 810
Page 4
Marking Marking
D
A
A B E E B
C
D
D
d
d
b b
Dimensions in mm
4)
Nom. Nom.
Weight
diam. pressure Type
kg/piece
DN PN D d b A B C E
25 64 35 5 25 3 30 0,23
32 76 43 5 25 3 40 0,32
40 86 49 5 25 3 40 0,40
50 96 61 5 25 3 40 0,47
A
65 116 77 5 25 4 40 0,67
80 132 90 5 25 4 40 0,85
Edition: 2006-10
H 810
Page 5
Dimensions in mm
4)
Nom. Nom. Type Weight
diam. pressure kg/piece
DN PN D d b A B C E
200*) 272 220 8 30 4 65 30 5,01
25 71 35 5 25 3 40 0,29
32 82 43 5 30 3 50 0,39
40 92 49 5 25 3 40 0,47
50 107 61 5 25 4 40 0,62
A
65 127 77 5 25 4 40 0,84
80 142 90 8 25 4 40 1,61
Edition: 2006-10
H 810
Page 6
Dimensions in mm
4)
Nom. Nom. Type Weight
diam. pressure kg/piece
PN
DN D d b A B C E
25 71 35 5 25 3 40 0,29
32 82 43 5 30 3 50 0,39
40 92 49 5 25 3 40 0,47
50 107 61 8 25 4 40 0,97
A
65 127 77 8 25 4 40 1,32
80 142 90 8 25 4 40 1,61
25 82 30 5 30 3 50 0,42
40 102 47 5 30 3 50 0,60
50 112 59 8 30 4 50 1,34
65 A 137 73 8 30 4 50 1,63
80 147 86 8 30 4 40 1,81
100 173 105 10 30 6 50 3,07
Edition: 2006-10
H 810
Page 7
D
A
A B E E B
C
c2
c2
d2
d2
D
d
D
d
f2 f2
n2
n2
b b
Dimensions in mm
4)
Nom. Nom. Type Weight
diam. press. kg/piece
DN PN D d b c2 d2 n2 f2 A B C E
200*) 272 210 16 238 260 11 3,5 30 10 65 30 9,55
250 327 265 18 291 313 11 3,5 30 10 65 30 15,05
300 377 310 19 342 364 11 3,5 30 12 65 30 21,00
350 10 D 437 340 21 394 422 14 4 30 18 65 30 34,69
400 488 395 23 446 474 14 4 30 15 65 30 43,25
500 593 495 26 548 576 14 4 30 20 65 30 70,86
600 695 600 29 648 676 14 4 30 20 65 30 105,21
25 71 30 10 42 58 8 3 25 8 40 0,51
32 82 40 10 50 66 8 3 30 8 50 0,68
40 92 45 10 60 76 8 3 25 8 40 0,82
50 107 55 10 72 88 8 3 25 10 40 1,11
C
65 127 75 12 94 110 8 3 25 10 40 1,70
80 142 85 12 105 121 8 3 25 10 40 2,26
100 162 110 16 128 150 11 3,5 25 10 40 3,53
125 192 135 16 154 176 11 3,5 30 10 40 4,94
16
150 217 160 17 182 204 11 3,5 35 15 65 30 6,84
200 272 210 18 238 260 11 3,5 30 10 65 30 10,84
250 328 265 20 291 313 11 3,5 30 10 65 30 16,98
300 385 310 22 342 364 11 3,5 30 12 65 30 27,20
D
350 443 340 24 394 422 14 4 30 18 65 30 39,18
400 495 395 27 446 474 14 4 40 20 70 40 53,81
500 617 495 31 548 576 14 4 40 20 80 40 96,32
600 734 600 35 648 676 14 4 40 20 70 40 151,91
Edition: 2006-10
H 810
Page 8
Dimensions in mm
4)
Nom. Nom. Type Weight
diam. pressure Kg/piece
DN PN D d b c2 d2 n2 f2 A B C E
200**) 283 210 20 238 260 11 3,5 35 15 70 30 13,79
250 340 265 22 291 313 11 3,5 35 15 70 30 21,10
300 400 310 25 342 364 11 3,5 35 20 70 30 33,73
350 25 D 457 340 29 394 422 14 4 40 18 70 30 52,26
400 514 390 31 446 474 14 4 40 25 90 40 70,62
500 624 490 36 548 576 14 4 40 25 90 40 117,69
600 731 600 41 648 676 14 4 40 30 90 40 176,98
25 71 30 12 42 58 8 3 25 8 40 0,62
32 82 40 12 50 66 8 3 30 8 50 0,83
40 92 45 12 60 76 8 3 25 8 40 1,00
50 107 55 15 72 88 8 3 25 10 40 1,93
C
65 127 75 15 94 110 8 3 25 10 40 2,30
80 142 85 15 105 121 8 3 25 10 40 2,87
100 167 110 17 128 150 11 3,5 25 10 40 3,85
125 196 135 18 154 176 11 3,5 30 10 50 5,99
40
150 223 160 20 182 204 11 3,5 35 15 70 30 8,78
200 290 210 24 238 260 11 3,5 35 15 70 30 17,84
250 352 265 26 291 313 11 3,5 35 20 70 30 27,88
300 417 310 29 342 364 11 3,5 35 20 70 30 44,21
D
350 474 340 33 394 422 14 4 40 20 80 40 66,52
400 546 390 37 446 474 14 4 50 30 90 40 100,26
500 628 490 43 548 576 14 4 50 35 90 40 145,09
600 747 585 49 648 676 14 4 50 40 90 40 232,08
25 82 30 12 42 58 8 3 30 8 50 0,90
40 102 45 12 60 76 8 3 30 8 50 1,32
50 112 55 15 72 88 8 3 30 10 50 1,96
65 C 137 75 15 94 110 8 3 30 10 50 2,82
80 147 85 16 105 121 8 3 30 10 50 3,40
100 173 110 19 128 150 11 3,5 30 10 50 5,34
125 210 135 21 154 176 11 3,5 30 10 50 8,54
63
150 247 160 23 182 204 11 3,5 40 15 90 40 13,68
200 309 205 27 238 260 11 3,5 40 20 90 40 24,84
250 364 260 31 291 313 11 3,5 40 25 90 40 37,83
300 D 424 310 35 342 364 11 3,5 40 30 90 40 57,00
350 486 340 39 394 422 14 4 40 30 80 40 84,84
400 543 390 44 446 474 14 4 50 30 100 50 121,24
500 657 490 51 548 576 14 4 50 40 100 50 195,64
Edition: 2006-10
H 810
Page 9
25
DIN555 (EN 24034)
50
VAI-Std. H551
f1
f1
DN
Dimensions in mm
Nominal pressure 6 Nominal pressure 10 Nominal pressure 16
Nom.
bolt length I bolt length I bolt length I
diam.
flange facing flange facing flange facing
DN a f1 C, E N, NA a f1 C, E N, NA a f1 C, E N, NA
100 12 2,5 60 60 12 2,5 60 60 12 2,5 60 60
125 12 2,5 60 60 12 3,0 60 60 12 2,5 60 60
150 12 2,5 60 60 12 3,5 60 60 12 2,5 60 60
200 12 3,0 60 70 16 2,5 60 70 16 3,0 60 70
250 12 3,5 60 70 16 3,5 60 70 16 3,0 60 70
300 12 4,0 60 70 16 3,0 60 70 16 3,0 60 70
350 12 4,0 70 70 16 3,0 70 70 16 3,0 60 70
400 12 4,0 70 80 16 3,0 70 80 20 3,5 70 80
500 16 4,5 70 80 16 4,0 70 80 20 4,5 70 80
600 16 4,5 80 100 16 3,5 80 100 20 6,5 70 80
Page 10
p .S
b = dB . C . + c1 + c 2
10 . K
b = see sketch below
dB = middle sealing diameter
C = 0,4 for on both sides free resting plates acc. to AD-Merkblatt B5
p = internal pressure (bar)
S = safety factor
K = strength value (N/mm2 )
c1 = tolerance of production
c2 = corrosion allowance (see also 2.3)
b b1 0,7b
25
20
M
b
dB
D
C
Hole plate
(or full plat)
Marking
with flat face with groove
Edition: 2006-10
Standard
Itemgroup: Elbow
9+SPET4
Item: Elbow 45°
Page 1 of 1
45°
A
A
d1
d2
20 3/4" 40 25 0,19
RODIKS-material-take-off (MTO):
The nominal diameter (DN) shall be used for the input in the RODIKS-material-take-off.
Page 2
Partnumber: 9+SPHFASL
Designation: High corrugation count and high flexible METAL HOSE with a male hexagon nipple
on one end and with a female hexagon union on the other end.
C
tapered
D min. 1 metal braid SW 1 sealing Symbol
d1
d2
Flattening
SW 2 B or hexagonal
Widths
Pipe Hose Thread Dimensions over flats of Bend. Weights
hex. nut radius kg / pce. kg / m
DN DN d1 d2 A B C D SW1 SW2 Nipple Union Hose
10 10 R 3/8“ Rp 3/8“ 57 47 35 25 22 19 180 0,04 0,08 0,28
15 12 R 1/2“ Rp 1/2“ 64 52 41 29 27 22 175 0,05 0,13 0,44
20 20 R 3/4“ Rp 3/4“ 76 60 48 32 36 27 185 0,09 0,21 0,69
25 25 R 1“ Rp 1“ 84 66 56 38 41 36 195 0,14 0,31 0,93
32 32 R 1 1/4“ Rp 1 1/4“ 91 71 60 40 50 46 205 0,23 0,48 1,17
40 40 R 1 1/2“ Rp 1 1/2“ 97 75 62 40 60 50 250 0,25 0,61 1,53
50 50 R 2“ Rp 2“ 108 83 72 47 70 60 300 0,43 0,81 2,30
65 65 R 2 1/2“ Rp 2 1/2“ 111 83 80 52 110 80 375 0,65 1,80 3,79
80 80 R 3“ Rp 3“ 121 91 86 56 123 90 450 0,75 2,40 4,62
Rodiks-material-take-off (MTO):
The Pipe-DN shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 3
Partnumber: 9+SPHFESL
SW1
L
Widths
Pipe Hose Thread Dimensions over flats Bend. Weights
of hex. nut radius kg/2 pce. kg / m.
AD DN d1 A B SW1 Union Hose
8 6 M14 x 1,5 40 32 17 130 0,06 0,18
10 8 M16 x 1,5 45 35 19 150 0,08 0,25
12 10 M18 x 1,5 45 35 22 180 0,10 0,28
15 12 M22 x 1,5 47 35 27 175 0,14 0,44
18 16 M26 x 1,5 52 38 32 180 0,22 0,50
22 20 M30 x 2 56 40 36 185 0,30 0,69
28 25 M36 x 2 62 44 41 195 0,42 0,93
35 32 M45 x 2 66 46 55 205 0,62 1,17
42 40 M52 x 2 72 50 60 250 0,96 1,53
Rodiks-material-take-off (MTO):
The Pipe-OD shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 4
Partnumber: 9+SPHFFSL
Designation: High corrugation count and high flexible METAL HOSE with a collar and lapped flange
on one end and with a welding neck flange on the other end.
Medium: Cooling water Operating data: tmax = 80°C pmax = 16 bar
C
D h1 h2
Symbol
min. 1 metal braid
d1
d2
d2
d1
f B
b A
L
Edition: 99-04
9+SPHF
Page 5
Partnumber: 9+SPHFJSL
Designation: High corrugation count and high flexible METAL HOSE with a
female hexagon socket on one end and with a female hexagon union
on the other end.
C tapered
SW 1 sealing Symbol
D min. 1 metal braid
d
d
Flattening
B or hexagonal
SW 2
A
Widths
Pipe Hose Thread Dimensions over flats Bend. Weights
of hex. nut radius kg / pce. kg / m.
DN DN d A B C D SW1 SW2 Fm.Un Sw.Un. Hose
10 10 Rp 3/8“ 57 47 31 21 22 22 180 0,04 0,08 0,28
15 12 Rp 1/2“ 64 52 36 24 27 24 175 0,06 0,13 0,44
20 20 Rp 3/4“ 76 60 43 27 36 32 185 0,10 0,21 0,69
25 25 Rp 1“ 84 66 49 31 41 41 195 0,19 0,31 0,93
32 32 Rp 1 1/4“ 91 71 54 34 50 46 205 0,22 0,48 1,17
40 40 Rp 1 1/2“ 97 75 58 36 60 55 250 0,31 0,61 1,53
50 50 Rp 2“ 108 83 67 42 70 65 300 0,41 0,81 2,30
65 65 Rp 2 1/2“ 111 83 77 49 110 85 375 0,86 1,80 3,79
80 80 Rp 3“ 121 91 84 54 123 100 450 1,22 2,40 4,62
Rodiks-material-take-off (MTO):
The Pipe-DN shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 6
Partnumber: 9+SPHFLSL
Designation: High corrugation count and high flexible METAL HOSE with a
male hexagon nipple on one end with a union nut and 24° - conical sealing and O-ring
on the other end.
C A
Symbol
D min. 1 metal braid B
d1
d2
SW 2
SW1
L
Widths
Pipe Hose Thread Dimensions over flats of Bend. Weights
hex. nut radius kg / pce. kg / m
AD DN d1 d2 A B C D SW1 SW2 Union Nipple Hose
8 6 M14 x 1,5 R 1/4“ 40 32 35 25 17 14 130 0,03 0,04 0,18
10 8 M16 x 1,5 R 1/4“ 45 35 41 29 19 14 150 0,04 0,05 0,25
12 10 M18 x 1,5 R 3/8“ 45 35 48 32 22 19 180 0,05 0,09 0,28
15 12 M22 x 1,5 R 1/2“ 47 35 56 38 27 22 175 0,07 0,14 0,44
18 16 M26 x 1,5 R 1/2“ 52 38 60 40 32 22 180 0,11 0,23 0,50
22 20 M30 x 2 R 3/4“ 56 40 62 40 36 27 185 0,15 0,25 0,69
28 25 M36 x 2 R 1“ 62 44 72 47 41 36 195 0,21 0,43 0,93
35 32 M45 x 2 R 1 1/4“ 66 46 80 52 55 46 205 0,31 0,65 1,17
42 40 M52 x 2 R 1 1/2“ 72 50 86 56 60 50 250 0,48 0,75 1,53
Edition: 99-04
9+SPHF
Page 7
Partnumber: 9+SPHFNSL
SW 1
L
Widths
Pipe Hose Thread Dimensions over flats Bend. Weights
of hex. nut radius kg/2 pce. kg / m
DN DN d1 A B SW1 Nipple Hose
10 10 R 3/8“ 35 25 19 180 0,08 0,28
15 12 R 1/2“ 41 29 22 175 0,10 0,44
20 20 R 3/4“ 48 32 27 185 0,18 0,69
25 25 R 1“ 56 38 36 195 0,28 0,93
32 32 R 1 1/4“ 60 40 46 205 0,46 1,17
40 40 R 1 1/2“ 62 40 50 250 0,50 1,53
50 50 R 2“ 72 47 60 300 0,86 2,30
65 65 R 2 1/2“ 80 52 80 375 1,30 3,79
80 80 R 3“ 86 56 90 450 1,50 4,62
Rodiks-material-take-off (MTO):
The Pipe-DN shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 8
Partnumber: 9+SPHFSSL
Designation: High corrugation count and high flexible METAL HOSE with a male hexagon nipple
on one end and a female hexagon socket on the other end.
C A
D B Symbol
min. 1 metal braid
d1
d2
SW 2 SW 1
Widths
Pipe Hose Thread Dimensions over flats Bend. Weights
of hex. nut radius kg / pce. kg / m
DN DN d1 d2 A B C D SW1 SW2 Nipple Socket Hose
10 10 R 3/8“ Rp 3/8“ 31 21 35 25 22 19 180 0,04 0,04 0,28
15 12 R 1/2“ Rp 1/2“ 36 24 41 29 24 22 175 0,05 0,06 0,44
20 20 R 3/4“ Rp 3/4“ 43 27 48 32 32 27 185 0,09 0,10 0,69
25 25 R 1“ Rp 1“ 49 31 56 38 41 36 195 0,14 0,19 0,93
32 32 R 1 1/4“ Rp 1 1/4“ 54 34 60 40 46 46 205 0,23 0,22 1,17
40 40 R 1 1/2“ Rp 1 1/2“ 58 36 62 40 55 50 250 0,25 0,31 1,53
50 50 R 2“ Rp 2“ 67 42 72 47 65 60 300 0,43 0,41 2,30
65 65 R 2 1/2“ Rp 2 1/2“ 77 49 80 52 85 80 375 0,65 0,86 3,79
80 80 R 3“ Rp 3“ 84 54 86 56 100 90 450 0,75 1,22 4,62
Rodiks-material-take-off (MTO):
The Pipe-DN shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 9
Partnumber: 9+SPHFTSL
Designation: High corrugation count and high flexible METAL HOSE wih a male hexagon nipple
on one end and with an union nut and 24° -conical sealing and O-ring
on the other end.
A
C
Symbol
min. 1 metal braid B
D
d1
d2
SW 2
SW1
L
Widths
Pipe Hose Thread Dimensions over flats Bend. Weights
NPT of hex. nut radius kg / pce. kg / m
AD DN d1 d2 A B C D SW1 SW2 Union Nipple Hose
8 6 M14 x 1,5 1/4“ 40 32 35 25 17 14 130 0,03 0,04 0,18
10 8 M16 x 1,5 1/4“ 45 35 41 29 19 14 150 0,04 0,05 0,25
12 10 M18 x 1,5 3/8“ 45 35 48 32 22 19 180 0,05 0,09 0,28
15 12 M22 x 1,5 1/2“ 47 35 56 38 27 22 175 0,07 0,14 0,44
18 16 M26 x 1,5 1/2“ 52 38 60 40 32 22 180 0,11 0,23 0,50
22 20 M30 x 2 3/4“ 56 40 62 40 36 27 185 0,15 0,25 0,69
28 25 M36 x 2 1“ 62 44 72 47 41 36 195 0,21 0,43 0,93
35 32 M45 x 2 1 1/4“ 66 46 80 52 55 46 205 0,31 0,65 1,17
42 40 M52 x 2 1 1/2“ 72 50 86 56 60 50 250 0,48 0,75 1,53
Edition: 99-04
9+SPHF
Page 10
Partnumber: 9+SPHFUSL
SW 1
L
Widths
Pipe Hose NPT-thread Dimensions over flats Bend. Weights
of hex. nut radius kg/2 pce. kg / m
DN DN d1 A B SW1 Nipple Hose
10 10 3/8“ 35 25 19 180 0,08 0,28
15 12 1/2“ 41 29 22 175 0,10 0,44
20 20 3/4“ 48 32 27 185 0,18 0,69
25 25 1“ 56 38 36 195 0,28 0,93
32 32 1 1/4“ 60 40 46 205 0,46 1,17
40 40 1 1/2“ 62 40 50 250 0,50 1,53
50 50 2“ 72 47 60 300 0,86 2,30
65 65 2 1/2“ 80 52 80 375 1,30 3,79
80 80 3“ 86 56 90 450 1,50 4,62
Rodiks-material-take-off (MTO):
The Pipe-DN shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 11
Partnumber: 9+SPHNASL
Designation: High corrugation count and high flexible METAL HOSE with a male hexagon nipple
on one end and with a female hexagon union on the other end.
C
tapered
min. 1 metal braid SW 1 sealing Symbol
D
d1
d2
Flattening
SW 2 B or hexagonal
Widths
Pipe Hose Thread Dimensions over flats of Bend. Weights
hex. nut radius kg / pce. kg / m
DN DN d1 d2 A B C D SW1 SW2 Nipple Union Hose
10 10 R 3/8“ Rp 3/8“ 57 47 35 25 22 19 180 0,04 0,08 0,28
15 12 R 1/2“ Rp 1/2“ 64 52 41 29 27 22 175 0,05 0,13 0,44
20 20 R 3/4“ Rp 3/4“ 76 60 48 32 36 27 185 0,09 0,21 0,69
25 25 R 1“ Rp 1“ 84 66 56 38 41 36 195 0,14 0,31 0,93
32 32 R 1 1/4“ Rp 1 1/4“ 91 71 60 40 50 46 205 0,23 0,48 1,17
40 40 R 1 1/2“ Rp 1 1/2“ 97 75 62 40 60 50 250 0,25 0,61 1,53
50 50 R 2“ Rp 2“ 108 83 72 47 70 60 300 0,43 0,81 2,30
65 65 R 2 1/2“ Rp 2 1/2“ 111 83 80 52 110 80 375 0,65 1,80 3,79
80 80 R 3“ Rp 3“ 121 91 86 56 123 90 450 0,75 2,40 4,62
Rodiks-material-take-off (MTO):
The Pipe-DN shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 12
Partnumber: 9+SPHNESL
SW1
L
Widths
Pipe Hose Thread Dimensions over flats Bend. Weights
of hex. nut radius kg/2 pce. kg / m.
AD DN d1 A B SW1 Union Hose
8 6 M14 x 1,5 40 32 17 130 0,06 0,18
10 8 M16 x 1,5 45 35 19 150 0,08 0,25
12 10 M18 x 1,5 45 35 22 180 0,10 0,28
15 12 M22 x 1,5 47 35 27 175 0,14 0,44
18 16 M26 x 1,5 52 38 32 180 0,22 0,50
22 20 M30 x 2 56 40 36 185 0,30 0,69
28 25 M36 x 2 62 44 41 195 0,42 0,93
35 32 M45 x 2 66 46 55 205 0,62 1,17
42 40 M52 x 2 72 50 60 250 0,96 1,53
Rodiks-material-take-off (MTO):
The Pipe-OD shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 13
Partnumber: 9+SPHNFSL
Designation: High corrugation count and high flexible METAL HOSE with a collar and lapped flange
on one end and with a welding neck flange on the other end.
Medium: Cooling water Operating data: tmax = 80°C pmax = 16 bar
C
D h1 h2
Symbol
min. 1 metal braid
d1
d2
d2
d1
f B
b A
L
Edition: 99-04
9+SPHF
Page 14
Partnumber: 9+SPHNJSL
Designation: High corrugation count and high flexible METAL HOSE with a
female hexagon socket on one end and with a female hexagon union
on the other end.
C tapered
SW 1 sealing Symbol
D min. 1 metal braid
d
d
Flattening
B or hexagonal
SW 2
A
Widths
Pipe Hose Thread Dimensions over flats Bend. Weights
of hex. nut radius kg / pce. kg / m.
DN DN d A B C D SW1 SW2 Fm.Un Sw.Un. Hose
10 10 Rp 3/8“ 57 47 31 21 22 22 180 0,04 0,08 0,28
15 12 Rp 1/2“ 64 52 36 24 27 24 175 0,06 0,13 0,44
20 20 Rp 3/4“ 76 60 43 27 36 32 185 0,10 0,21 0,69
25 25 Rp 1“ 84 66 49 31 41 41 195 0,19 0,31 0,93
32 32 Rp 1 1/4“ 91 71 54 34 50 46 205 0,22 0,48 1,17
40 40 Rp 1 1/2“ 97 75 58 36 60 55 250 0,31 0,61 1,53
50 50 Rp 2“ 108 83 67 42 70 65 300 0,41 0,81 2,30
65 65 Rp 2 1/2“ 111 83 77 49 110 85 375 0,86 1,80 3,79
80 80 Rp 3“ 121 91 84 54 123 100 450 1,22 2,40 4,62
Rodiks-material-take-off (MTO):
The Pipe-DN shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 15
Partnumber: 9+SPHNLSL
Designation: High corrugation count and high flexible METAL HOSE with a
male hexagon nipple on one end with a union nut and 24° - conical sealing and O-ring
on the other end.
Medium: Cooling water Operating data: tmax = 80°C pmax = 16 bar
C A
Symbol
min. 1 metal braid B
D
d1
d2
SW 2
SW1
L
Widths
Pipe Hose Thread Dimensions over flats of Bend. Weights
hex. nut radius kg / pce. kg / m
AD DN d1 d2 A B C D SW1 SW2 Union Nipple Hose
8 6 M14 x 1,5 R 1/4“ 40 32 35 25 17 14 130 0,03 0,04 0,18
10 8 M16 x 1,5 R 1/4“ 45 35 41 29 19 14 150 0,04 0,05 0,25
12 10 M18 x 1,5 R 3/8“ 45 35 48 32 22 19 180 0,05 0,09 0,28
15 12 M22 x 1,5 R 1/2“ 47 35 56 38 27 22 175 0,07 0,14 0,44
18 16 M26 x 1,5 R 1/2“ 52 38 60 40 32 22 180 0,11 0,23 0,50
22 20 M30 x 2 R 3/4“ 56 40 62 40 36 27 185 0,15 0,25 0,69
28 25 M36 x 2 R 1“ 62 44 72 47 41 36 195 0,21 0,43 0,93
35 32 M45 x 2 R 1 1/4“ 66 46 80 52 55 46 205 0,31 0,65 1,17
42 40 M52 x 2 R 1 1/2“ 72 50 86 56 60 50 250 0,48 0,75 1,53
Edition: 99-04
9+SPHF
Page 16
Partnumber: 9+SPHNNSL
SW 1
L
Widths
Pipe Hose Thread Dimensions over flats Bend. Weights
of hex. nut radius kg/2 pce. kg / m
DN DN d1 A B SW1 Nipple Hose
10 10 R 3/8“ 35 25 19 180 0,08 0,28
15 12 R 1/2“ 41 29 22 175 0,10 0,44
20 20 R 3/4“ 48 32 27 185 0,18 0,69
25 25 R 1“ 56 38 36 195 0,28 0,93
32 32 R 1 1/4“ 60 40 46 205 0,46 1,17
40 40 R 1 1/2“ 62 40 50 250 0,50 1,53
50 50 R 2“ 72 47 60 300 0,86 2,30
65 65 R 2 1/2“ 80 52 80 375 1,30 3,79
80 80 R 3“ 86 56 90 450 1,50 4,62
Rodiks-material-take-off (MTO):
The Pipe-DN shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 17
Partnumber: 9+SPHNSSL
Designation: High corrugation count and high flexible METAL HOSE with a male hexagon nipple
on one end and a female hexagon socket on the other end.
C A
D B Symbol
min. 1 metal braid
d1
d2
SW 2 SW 1
Widths
Pipe Hose Thread Dimensions over flats Bend. Weights
of hex. nut radius kg / pce. kg / m
DN DN d1 d2 A B C D SW1 SW2 Nipple Socket Hose
10 10 R 3/8“ Rp 3/8“ 31 21 35 25 22 19 180 0,04 0,04 0,28
15 12 R 1/2“ Rp 1/2“ 36 24 41 29 24 22 175 0,05 0,06 0,44
20 20 R 3/4“ Rp 3/4“ 43 27 48 32 32 27 185 0,09 0,10 0,69
25 25 R 1“ Rp 1“ 49 31 56 38 41 36 195 0,14 0,19 0,93
32 32 R 1 1/4“ Rp 1 1/4“ 54 34 60 40 46 46 205 0,23 0,22 1,17
40 40 R 1 1/2“ Rp 1 1/2“ 58 36 62 40 55 50 250 0,25 0,31 1,53
50 50 R 2“ Rp 2“ 67 42 72 47 65 60 300 0,43 0,41 2,30
65 65 R 2 1/2“ Rp 2 1/2“ 77 49 80 52 85 80 375 0,65 0,86 3,79
80 80 R 3“ Rp 3“ 84 54 86 56 100 90 450 0,75 1,22 4,62
Rodiks-material-take-off (MTO):
The Pipe-DN shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 18
Partnumber: 9+SPHNTSL
Designation: High corrugation count and high flexible METAL HOSE wih a male hexagon nipple
on one end and with an union nut and 24° -conical sealing and O-ring
on the other end.
C A
Symbol
D min. 1 metal braid B
d1
d2
SW 2
SW1
L
Widths
Pipe Hose Thread Dimensions over flats Bend. Weights
NPT of hex. nut radius kg / pce. kg / m
AD DN d1 d2 A B C D SW1 SW2 Union Nipple Hose
8 6 M14 x 1,5 1/4“ 40 32 35 25 17 14 130 0,03 0,04 0,18
10 8 M16 x 1,5 1/4“ 45 35 41 29 19 14 150 0,04 0,05 0,25
12 10 M18 x 1,5 3/8“ 45 35 48 32 22 19 180 0,05 0,09 0,28
15 12 M22 x 1,5 1/2“ 47 35 56 38 27 22 175 0,07 0,14 0,44
18 16 M26 x 1,5 1/2“ 52 38 60 40 32 22 180 0,11 0,23 0,50
22 20 M30 x 2 3/4“ 56 40 62 40 36 27 185 0,15 0,25 0,69
28 25 M36 x 2 1“ 62 44 72 47 41 36 195 0,21 0,43 0,93
35 32 M45 x 2 1 1/4“ 66 46 80 52 55 46 205 0,31 0,65 1,17
42 40 M52 x 2 1 1/2“ 72 50 86 56 60 50 250 0,48 0,75 1,53
Rodiks-material-take-off (MTO):
The Pipe-OD shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
9+SPHF
Page 19
Partnumber: 9+SPHNUSL
SW 1
L
Widths
Pipe Hose NPT-thread Dimensions over flats Bend. Weights
of hex. nut radius kg/2 pce. kg / m
DN DN d1 A B SW1 Nipple Hose
10 10 3/8“ 35 25 19 180 0,08 0,28
15 12 1/2“ 41 29 22 175 0,10 0,44
20 20 3/4“ 48 32 27 185 0,18 0,69
25 25 1“ 56 38 36 195 0,28 0,93
32 32 1 1/4“ 60 40 46 205 0,46 1,17
40 40 1 1/2“ 62 40 50 250 0,50 1,53
50 50 2“ 72 47 60 300 0,86 2,30
65 65 2 1/2“ 80 52 80 375 1,30 3,79
80 80 3“ 86 56 90 450 1,50 4,62
Rodiks-material-take-off (MTO):
The Pipe-DN shall be used for the input in the Rodiks-material-take-off (MTO).
Edition: 99-04
Special-hydraulic-hose assemblies Standard
for tubes acc. to DIN
Part No.
9+SPHY
9 + 2) 3) 1) 4) 5) 9)
Page 1 of 11
Example of Designation of a hydraulic hose assembly, type 1ST with crimped fittings form N and O-ring (NBR)
Designation: on both ends, resistant against mineralic hydraulic oil, for tube outside diameter 22 mm,
fixed length 1,65 m, with certificate 2.2,
material: hose: rubber with reinforcement and fire proof coating (glass fibre)
fitting: stainless steel / O-ring: NBR
Partnumber
9+N4NQSLW 22*1.65 m HOSE ASSEMBLY 1ST-NN
9SPHY/DIN20078/DIN20066 MINER/RUBBER/GLASSF/NIRO/NBR/2.2
Partnumbering Code
Page 2
Footnotes
1) Material:
Quality of hoses acc. to DIN20021 thru DIN20024,
quality of hose assemblies (- fittings) acc. to DIN20066 (DIN20078).
Stainless steel flange heads with flange sizes 1 1/2“ and 2“ for nominal pressure ³ PN315 shall be avoided.
Hose assemblies shall be taken off in MTO with "XZ" and outside diameter of appropriate tube
and partnumber (length coded).
e.g. SHCD = XZ, DN1 = 38, partnumber 9+P6NPA3W
10) Fire proof coatings are fixed with the hose on both ends (crimped connection).
Maximum permanent temperature 220°C.
11) Specified nominal pressures are together allowable working pressures at 20° C acc. to
DIN20078 / part 8 (Form N), DIN20078 / part 9 (Form P), DIN20078 / part 10 (Form R) and
DIN20078 / part 12 (Form S) with safety factor 4 against bursting pressure.
Allowable working pressures of hoses see VAI-Std. H183 resp. DIN20021 - DIN20023.
Edition: 2000-06
9+SPHY
Page 3
Material table
Connecting
Hose type Application Material Hose material : synthetic rubber fitting
for code Body
+
Inliner Cover Coating Insert Nut O-Ring
Hydraulic oil NP --
mineralic
NBR NBR
or
NQ Glass fibre
water glycol
1.4541
NV --
Hose Hydraulic oil
FPM FPM
synthetic
assembly NW Glass fibre
with Rubber:
Textile
CR or
stainless or
Hydraulic oil NN manufactur. --
steel steel
mineralic option
crimped NBR NBR
or
fitting
water glycol NG Glass fibre
1.4571
NF --
Hydraulic oil
FPM FPM
synthetic
NY Glass fibre
Hydraulic oil
ZP --
mineralic
NBR NBR
or
ZQ Glass fibre Steel
water glycol
nickel
ZV -- plated
Hose Hydraulic oil
assembly FPM FPM
synthetic Rubber:
with ZW Glass fibre Textile
CR or
or
steel Hydraulic oil manufactur.
VP -- steel
crimped mineralic option Steel
fitting NBR NBR
or galvan.
VQ Glass fibre
water glycol and
yellow
VV --
Hydraulic oil passi-
FPM FPM
synthetic vated
VW Glass fibre
Edition: 2000-06
9+SPHY
Page 4
W E I G H T S for H O S E - F I T T I N G S in kg / piece
7) HOSE-FITTING FORM R
Flange Hose straight connection 90° - Elbow
Size Nominal 2TE, 3TE 2TE, 3TE
(Dash-Size) diameter 1ST, 2ST 4SP 4SH 1ST, 2ST 4SP 4SH
DN 1SN, 2SN 1SN, 2SN
-8 12 0,10 0,08 - 0,13 0,12 -
-12 20 0,17 0,18 0,22 0,24 0,30 0,31
-16 25 0,27 0,28 0,36 0,31 0,41 0,59
-20 32 0,29 - 0,50 0,39 - 0,83
-24 40 0,44 - 0,65 0,71 - 1,06
-32 50 0,80 - 0,98 1,05 - 1,90
W E I G H T S for H O S E - F I T T I N G S in kg / piece
7) HOSE-FITTING FORM S
Flange Hose straight connection 90° - Elbow
Size Nominal 2TE, 3TE 2TE, 3TE
(Dash-Size) diameter 1ST, 2ST 4SP 4SH 6SP 1ST, 2ST 4SP 4SH 6SP
DN 1SN, 2SN 1SN, 2SN
-8 12 - 0,11 - - - 0,14 - -
-12 20 0,23 0,20 0,27 - 0,35 0,33 0,35 -
-16 25 0,33 0,35 0,41 - 0,39 0,45 0,60 -
-20 32 0,41 - 0,60 0,70 0,51 - 0,85 1,10
-24 40 0,55 - 0,81 1,02 0,90 - 1,36 1,90
-32 50 - - 1,41 1,85 - - 2,37 3,10
Edition: 2000-06
9+SPHY
Page 5
W E I G H T S for H O S E - F I T T I N G S in kg / piece
7) HOSE-FITTING Form N
Tube Hose straight connection 45° - Elbow 90° - Elbow
outside Nominal 2TE, 3TE 2TE, 3TE 2TE, 3TE
diameter diameter 1TE 1ST, 2ST 4SP 1TE 1ST, 2ST 4SP 1TE 1ST, 2ST 4SP
Series L DN 1SN, 2SN 1SN, 2SN 1SN, 2SN
6 5 +) 0,03 0,02 - 0,02 0,04 - 0,03 0,03 -
8 6 0,03 0,03 - 0,03 0,05 - 0,04 0,05 -
10 8 0,04 0,05 - 0,05 0,06 - 0,04 0,06 -
12 10 0,05 0,07 0,07 0,06 0,09 - 0,07 0,09 -
15 12 0,08 0,13 0,13 0,09 0,13 - 0,11 0,13 -
18 16 0,11 0,15 0,15 0,14 0,18 - 0,16 0,16 -
22 20 0,15 0,22 0,22 0,20 0,25 - 0,22 0,29 -
28 25 - 0,30 0,30 - 0,36 - - 0,42 -
35 32 - 0,37 - - 0,53 - - 0,65 -
42 40 - 0,59 - - 0,65 - - 1,16 -
W E I G H T S for H O S E - F I T T I N G S in kg / piece
7) HOSE-FITTING FORM P
Tube Hose straight connection 45° - Elbow 90° - Elbow
outside Nominal 2TE, 3TE 2TE, 3TE 2TE, 3TE
diameter diameter 1ST, 2ST 4SP 4SH 6SP 1ST, 2ST 4SP 4SH 6SP 1ST, 2ST 4SP 4SH 6SP
Series S DN 1SN, 2SN 1SN, 2SN 1SN, 2SN
8 5 0,04 - - - 0,04 - - - 0,04 - - -
10 6 0,06 - - - 0,07 - - - 0,06 - - -
12 8 0,07 - - - 0,10 - - - 0,07 - - -
14 10 0,10 0,09 - - 0,13 0,11 - - 0,12 0,13 - -
16 12 0,12 0,13 - - 0,15 0,14 - - 0,16 0,17 - -
20 16 0,21 0,21 - - 0,22 0,24 - - 0,17 0,26 - -
25 20 0,30 0,26 0,32 - 0,33 0,34 0,36 - 0,26 0,40 0,33 -
30 25 0,39 0,39 0,46 - 0,51 0,59 0,66 - 0,53 0,68 0,48 -
38 32 0,72 - 0,65 0,66 0,84 - 0,99 0,90 0,86 - 0,54 0,95
50 40 1,47 - 0,94 1,25 - - - - - - - -
Edition: 2000-06
9+SPHY
Page 6
Hose assembly
with straight connection Form N or Form P on both ends
Any hose types acc. to DIN20021 thru DIN20023
requirements acc. to DIN20024
Series L for Form N
Series S for Form P
Mating connection: SW
threaded stud SW
port end type W (24°) 1 1
acc. to DIN3861
d5
d7
d7
d5
d4
d4
l4 l4
O-Ring O-Ring
L
**)
Dimensions in mm
Tube d 4 max. l 4 max. 11)
Fitting outside Hose for hose type for hose type Nom.
type diameter Nominal d7 d5 2TE SW 1 press.
Series L diameter min. 1TE 2TE 1ST 2ST 1TE -
7) 3TE 1SN 2SN 2SN PN
6 5 +) M12x1,5 2,8 16 21 - - 55 77 17
8 6 M14x1,5 3,6 17 22 23,5 - 55 81 17
10 8 M16x1,5 5,5 20 25 27 - 57 84 19 250
DIN20078 12 10 M18x1,5 6,2 23 29 29 - 65 86 22
Form N 15 12 M22x1,5 9 30 32,5 32,5 - 65 88 27
18 16 M26x1,5 12 32 35 39 - 82 99 32 160
22 20 M30x2 15 36,5 40 41 - 83 109 36
28 25 M36x2 19,5 43 50 50 - 85 118 41
35 32 M45x2 25,4 - 58 62 - - 141 55 100
42 40 M52x2 31 - 70 70 75 - 151 60
Edition: 2000-06
9+SPHY
Page 7
Hose assembly
with straight connection Form R or Form S on both ends and O-Ring
Any hose types acc. to DIN20021 thru DIN20023
requirements acc. to DIN20024
Form R acc. to DIN20078 / 10 ( = Standard Pressure Series / SAE J518) §)
Form S acc. to DIN20078 / 12 ( = High Pressure Series / SAE J518) §)
Appropriate SAE-flanges see VAI-Std. H488
Mating facing
acc. to SAE J518
d5
d8
d5
d8
d4
d4
l4 l4
L **)
O-Ring
(see VAI-Std. H699)
seal
Dimensions in mm
7) Tube d 4 max. l 4 max.
Flange Hose outside for hose type for hose type 11)
Fitting size Nominal diameter d8 d5 Nom.
type (Dash- diameter acc. to ±0,25 min. 1ST 4SP 2TE 4SP press.
Size) DIN20066 2TE - 4SH - 4SH
3TE 2SN 6SP 2SN 6SP PN
-8 12 15 30,2 9 32,5 32,5 - 97 -
-12 20 22 38,1 15 40 42 45 115 116 350
DIN20078 -16 25 28 44,5 19,5 50 54 56 128 138
Form R -20 32 35 50,8 25,4 58 70 73 147 155 280
Standard -24 40 42 60,3 31 70 75 84 152 171 210
pressure -32 50 - 71,4 42 70 88 92 162 191
series -40 60 - 84,1 55 80 - - 150 - 170
-48 80 - 101,6 77 106 - - 160 - 140
-64 100 - 127 97 128 - - 220 - 35
**) Finished hose lenghts see position 7 and 8 of partnumber and footnote 4) 5) on page 2.
§) Previous designation SAE 3000 and SAE 6000.
Weights see page 4 and 5.
Further footnotes see page 2.
Edition: 2000-06
9+SPHY
Page 8
Hose assembly
with straight connection Form N or P on one end and 45°-elbow-connection Form N or P
on the other end
Any hose types acc. to DIN20021 thru DIN20023
requirements acc. to DIN20024
Series L for Form N
Series S for Form P
Mating connection:
threaded stud SW 1
port end type W (24°) d4
d7
d5
acc. to DIN3861
H
l4
L **)
Dimensions in mm
Tube d 4 max. l 4 max. H 11)
Fitting outside Hose for hose type for hose type for hose type Nom.
type diameter Nominal d7 d5 2TE 2TE SW 1 press.
Series L diameter min. 1TE 2TE 1ST 2ST 1TE - 1TE -
7) 3TE 1SN 2SN 2SN 2SN PN
6 5 +) M12x1,5 2,8 16 21 - - 55 77 18 15 17
8 6 M14x1,5 3,6 17 22 23,5 - 55 81 18 17,5 17
10 8 M16x1,5 5,5 20 25 27 - 57 84 19 19 19 250
DIN20078 12 10 M18x1,5 6,2 23 29 29 - 65 86 20 20,5 22
Form N 15 12 M22x1,5 9 30 32,5 32,5 - 65 88 21,5 21,5 27
18 16 M26x1,5 12 32 35 39 - 82 99 27,5 27,5 32 160
22 20 M30x2 15 36,5 40 41 - 83 109 26,5 26 36
28 25 M36x2 19,5 43 50 50 - 85 118 - 29,5 41
35 32 M45x2 25,4 - 58 62 - - 141 - 32,5 55 100
42 40 M52x2 31 - 70 70 75 - 151 - 38,5 60
Edition: 2000-06
9+SPHY
Page 9
Hose assembly
with straight connection Form N or P on one end and 90°-elbow-connection Form N or P
on the other end
Any hose types acc. to DIN20021 thru DIN20023
requirements acc. to DIN20024
Series L for Form N
Series S for Form P
Mating connection: l5
threaded stud SW 1
port end type W (24°)
d4
d4
d7
d5
acc. to DIN3861
l4
H
Connection between nipple and union nut acc. to manufacturer´s option.
SW 1
d5
d7
L **)
Dimensions in mm
Edition: 2000-06
9+SPHY
Page 10
Hose assembly
with straight connection Form R or S on one end and 90°-elbow-connection Form R or S
on the other end and O-Ring.
Any hose types acc. to DIN20021 thru DIN20023
requirements acc. to DIN20024
Form R acc. to DIN20078 / 10 ( = Standard Pressure Series / SAE J518) §)
Form S acc. to DIN20078 / 12 ( = High Pressure Series / SAE J518) §)
Appropriate SAE-flanges see VAI-Std. H488
l5
Mating facing
acc. to SAE J518
d4
d4
d8
d5
l4
O-Ring seal
(see VAI-Std. H699)
H
d5
d8
L **)
Dimensions in mm
Fitting type : DIN20078 / Form R / Standard pressure series
7) Tube d 4 max. l 4 max. l 5 max. H
Flange Hose outside for hose type for hose for hose type for hose type 11)
size Nominal diam. d8 d5 type Nom.
(Dash- daimeter acc. to ±0,25 min. 1ST 2TE 2TE 2TE press.
Size) DIN 2TE - 4SP - 4SP - 4SP 4SH 6SP - 4SP 4SH 6SP
20066 3TE 2SN 4SH 2SN 4SH 2SN 2SN PN
-8 12 15 30,2 9 32,5 32,5 - 97 - 83 84 - - 46 47 - -
-12 20 22 38,1 15 40 42 45 115 116 93,5 107 115,5 - 56 66 66,5 - 350
-16 25 28 44,5 19,5 50 54 56 128 138 106 120 128 - 61,5 72 71,5 -
-20 32 35 50,8 25,4 58 70 73 147 155 114 - 157,5 - 66 - 86,5 - 280
-24 40 42 60,3 31 70 75 84 152 171 125 - 173,5 - 73 - 101,5 - 210
-32 50 - 71,4 42 70 88 92 162 191 180 - 201 - 120 - 134,5 -
-40 60 - 84,1 55 80 - - 150 - - - - - - - - - 170
-48 80 - 101,6 77 106 - - 160 - - - - - - - - - 140
-64 100 - 127 97 128 - - 220 - - - - - - - - - 35
Edition: 2000-06
9+SPHY
Page 11
Hose assembly
with 2 straight stand pipes
hose type acc. to DIN20022
requirements acc. to DIN20024
A A
l4 F l4
F
E
E
d
d
L **)
Dimensions in mm
7) Working Nominal
Hose Tube Hose Inside pressure pressure
type outside Nominal A l4 diam. F (Hose) (Fitting)
diam. diameter dynam.
d E bar
6 5 +) 51,1 25 3,5 15 250
1SN 8 6 56,5 25 4 17 225 250
light 10 8 61,5 29,5 6 19 215
series
8 5 +) 53,5 25 3 18 415
2SN 10 6 60,5 29,5 4 20 400 315
heavy 12 8 65,5 35 7 22 350
series
**) Finished hose lenghts see position 7 and 8 of partnumber and footnote 4) 5) on page 2.
Edition: 2000-06
Standard
Itemgroup: Pressurized joints
Contents :
Page 2
Partnumber: 9+SPJJT01
N
D
S
30°
U L2
NPT-
Tube size thread Weigth
N Q D S L L2 U kg / 100 pcs.
TDS inch inch
-10 5/8 15,87 10 26,9 32 16
-12 3/4 19,05 13 26,9 34,5 17,53
-16 1 3/8 25,4 14,3 26,9 37 10,4 19,05
-20 1 1/4 31,75 14,3 31,75 42 -
-24 1 1/2 38,1 14,3 38,1 44 -
RODIKS-material-take-off (MTO):
The TDS (Tube Dash Size) shall be used for the input in the RODIKS-material-take-off
Edition: 98-10
9+SPJJT
Page 3
Partnumber: 9+SPJJT02
N
D
S
30°
U L2
NPT-
Tube size thread Weigth
N Q D S L L2 U kg / 100 pcs.
TDS inch inch
-10 5/8 15,87 10 26,9 32 16
-12 3/4 19,05 13 26,9 34,5 17,53
-16 1 3/8 25,4 14,3 26,9 37 10,4 19,05
-20 1 1/4 31,75 14,3 31,75 42 -
-24 1 1/2 38,1 14,3 38,1 44 -
RODIKS-material-take-off (MTO):
The TDS (Tube Dash Size) shall be used for the input in the RODIKS-material-take-off
Edition: 98-10
9+SPJJT
Page 4
Partnumber: 9+SPJJT11
Rp
Q
S
30°
U L2
Tube
Outside Pipe Weigth
diameter thread Q D S L L2 U kg / 100 pcs.
OD
16 16 10 30 30 16
20 20 13 30 32 17,5
25 Rp 3/8 25 15,2 30 36 11,4 19
30 30 15,2 30 48 -
38 38 15,2 38 39 -
RODIKS-material-take-off (MTO):
The OD (Tube outside diameter) shall be used for the input in the RODIKS-material-take-off
Edition: 98-10
9+SPJJT
Page 5
Partnumber: 9+SPJJT12
Rp
Q
S
30°
U L2
Tube
Outside Pipe Weigth
diameter thread Q D S L L2 U kg / 100 pcs.
OD
16 16 10 30 30 16
20 20 13 30 32 17,5
25 Rp 3/8 25 15,2 30 36 11,4 19
30 30 15,2 30 48 -
38 38 15,2 38 39 -
RODIKS-material-take-off (MTO):
The OD (Tube outside diameter) shall be used for the input in the RODIKS-material-take-off
Edition: 98-10
9+SPJJT
Page 6
Partnumber: 9+SPJJT13
Rp
Q
S
30°
U L2
Tube
Outside Pipe Weigth
diameter thread Q D S L L2 U kg / 100 pcs.
OD
16 16 10 30 30 16
20 20 13 30 32 17,5
25 Rp 3/8 25 15,2 30 36 11,4 19
30 30 15,2 30 48 -
38 38 15,2 38 39 -
RODIKS-material-take-off (MTO):
The OD (Tube outside diameter) shall be used for the input in the RODIKS-material-take-off
Edition: 98-10
9+SPJJT
Page 7
Partnumber: 9+SPJJT16
Rp
Q
S
30°
U L2
Tube
Outside Pipe Weigth
diameter thread Q D S L L2 U kg / 100 pcs.
OD
16 16 10 30 30 16
20 20 13 30 32 17,5
25 Rp 3/8 25 15,2 30 36 11,4 19
30 30 15,2 30 48 -
38 38 15,2 38 39 -
RODIKS-material-take-off (MTO):
The OD (Tube outside diameter) shall be used for the input in the RODIKS-material-take-off
Edition: 98-10
9+SPJJT
Page 8
Partnumber: 9+SPJJT17
Rp
Q
S
30°
U L2
Tube
Outside Pipe Weigth
diameter thread Q D S L L2 U kg / 100 pcs.
OD
16 16 10 30 30 16
20 20 13 30 32 17,5
25 Rp 3/8 25 15,2 30 36 11,4 19
30 30 15,2 30 48 -
38 38 15,2 38 39 -
RODIKS-material-take-off (MTO):
The OD (Tube outside diameter) shall be used for the input in the RODIKS-material-take-off
Edition: 98-10
9+SPJJT
Page 9
Partnumber: 9+SPJJT18
Rp
Q
S
30°
U L2
Tube
Outside Pipe Weigth
diameter thread Q D S L L2 U kg / 100 pcs.
OD
16 16 10 30 30 16
20 20 13 30 32 17,5
25 Rp 3/8 25 15,2 30 36 11,4 19
30 30 15,2 30 48 -
38 38 15,2 38 39 -
RODIKS-material-take-off (MTO):
The OD (Tube outside diameter) shall be used for the input in the RODIKS-material-take-off
Edition: 98-10
Standard
Item group: Pressurized joints
Item: Unions
9+SPJU
Page 1 of 22
Example of Adjustable stud elbow with sealing shoulder + 1 welding nipple, heavy series, for tube outside
Designation: diameter OD = 16 mm, with test report 2.2, stud acc. to DIN 3852 part 1, metric fine thread,
Material: Body, nut and welding nipple: stainless steel 1.4571,
O-Ring: Nitril-Butadiene-Rubber (NBR)
Partnumber
9+SPJU001 16 ADJUSTABLE ELBOW HEAVY
SERIES/METRIC/METALL.SEALING/9+SPJU 1.4571/NBR/+1SKA
Page 2
L1 L1
l1 l1
S2 S2
S3 S3
D
s
L2
S2 S2
L2
O-Ring O-Ring
S1 S1
Sealing shoulder Sealing shoulder
according to according to
DIN3852/Type B DIN3852/Type B
i
i
G G
G1 G1
d3 d3
Edition: 2005-01
9+SPJU
Page 3
Partnumber
9+SPJU011 16 ADJUSTABLE ELBOW+1WELD.N
HEAVY/METR/O-RNG/DIN3852-3 9+SPJU 1.4571/FPM/NBR
Edition: 2005-01
9+SPJU
Page 4
L1 L1
l1 l1
S2 S2
S3 S3
D
s
S2 S2
L2
L2
O-Ring O-Ring
S1 S1
d2 d2
Edition: 2005-01
9+SPJU
Page 5
L1 L1
l1 l1
S2 S2
S3 S3
D
s S2
L2
S2
L2
O-Ring O-Ring
S1 S1
i
i
NPTF NPTF
Edition: 2005-01
9+SPJU
Page 6
L1 L1
l1 l1
S2 S2
S3 S3
D
s
S2 S2
L2
L2
O-Ring O-Ring
S1 S1
O-Ring O-Ring
i
i
UN/UNF UN/UNF
Partnumber: 9+SPJU010 ¾
9+SPJU020 ¾
Edition: 2005-01
9+SPJU
Page 7
Partnumber
9+SPJU101 16 MALE STUD COUPLING+1W.NIP
HEAVY/METR/O-RNG/DIN3852-3 9+SPJU SS/FPM/NBR
Edition: 2005-01
9+SPJU
Page 8
d2
d2
G
D
G
O-Ring
i l1 i l1
L1 L1
Edition: 2005-01
9+SPJU
Page 9
S1 S2 S1 S2
NPTF
NPTF
D
s
O-Ring
i l1 i l1
L1 L1
Edition: 2005-01
9+SPJU
Page 10
Partnumber
9+SPJU151 18 MALE STUD COUPLING+1W.NIP
LIGHT/METR/O-RNG/DIN3852-3 9+SPJU 1.4571/FPM/NBR
Edition: 2005-01
9+SPJU
Page 11
d2
d2
G
D
G
s
O-Ring
i l1 i l1
L1 L1
Edition: 2005-01
9+SPJU
Page 12
S1 S2 S1 S2
NPTF
NPTF
D
s
O-Ring
i l1 i l1
L1 L1
Edition: 2005-01
9+SPJU
Page 13
Partnumber
9+SPJU155 18 MALE STUD COUPLING
LIGHT S./NPTF-THRD/ASME B1.20.3 9+SPJU BRASS
Edition: 2005-01
9+SPJU
Page 14
Cutting ring
DIN3861 Type B
NPTF S1 S2
i l1
L1
Partnumber: 9+SPJU155
Dimensions Weights
4)
Tube NPTF L1 l1 i S1 S2 Type B
OD. kg/pce.
6 1/8-27 22,1 7,1 9,5 12 14 0,02
8 1/4-18 22,9 7,9 14,3 17 17 0,04
10 1/4-18 23,9 8,9 14,3 17 19 0,05
12 1/4-18 24,9 9,9 14,3 19 22 0,06
15 1/2-14 26,2 11,2 19,1 24 27 0,11
18 1/2-14 28,2 11,7 19,1 27 32 0,15
22 3/4-14 29,9 13,4 19,1 32 36 0,21
28 1-11 ½ 31 14,5 23,8 41 41 0,32
35 1¼-11½ 36,4 14,9 24,6 46 50 0,46
42 1½-11½ 39 16 25,4 55 60 0,62
Edition: 2005-01
9+SPJU
Page 15
Partnumber
9+SPJU202 16 STUD ELBOW+1WELD.N
HEAVY S./NPTF/ASME B1.20.3 9+SPJU 1.4571/NBR
Edition: 2005-01
9+SPJU
Page 16
L1 L1
l1 l1
S2 S2
S1 S1
D
s
L2
L2
O-Ring
NPTF NPTF
Edition: 2005-01
9+SPJU
Page 17
Partnumber
9+SPJU252 18 STUD ELBOW+1WELD.N
LIGHT S./NPTF/ASME B1.20.3 9+SPJU 1.4571/NBR
Edition: 2005-01
9+SPJU
Page 18
L1 L1
l1 l1
S2 S2
S1 S1
D
s
L2
L2
O-Ring
NPTF NPTF
Edition: 2005-01
9+SPJU
Page 19
Partnumber
9+SPJU255 18 STUD ELBOW
LIGHT S./NPTF-THRD/ASME B1.20.3 9+SPJU BRASS
Edition: 2005-01
9+SPJU
Page 20
Cutting ring
DIN3861 Type B
L1
l1
S2
S1
L2
NPTF
Partnumber: 9+SPJU255
Dimensions Weights
4)
Tube NPTF L1 L2 l1 S1 S2 Type B
OD. kg/pce.
6 1/8-27 27 13 12 12 14 0,04
8 ¼-18 29 16 14 14 17 0,07
10 ¼-18 30 17 15 17 19 0,09
12 ¼-18 32 18 17 19 22 0,12
15 ½-14 36 20 21 19 27 0,14
18 ½-14 40 22 23,5 24 32 0,19
22 ¾-14 44 28 27,5 27 36 0,28
28 1-11 ½ 47 31 30,5 36 41 0,43
35 1¼-11½ 56 36 34,5 41 50 0,65
42 1½-11½ 63 43 40 50 60 0,97
Edition: 2005-01
9+SPJU
Page 21
Example of Adjustable stud elbow with sealing shoulder + 1 welding nipple, heavy series, for tube outside
Designation: diameter OD = 16 mm, with test report 2.2, stud acc. to DIN 3852 part 1, metric fine thread,
Material: Body, nut and welding nipple: stainless steel 1.4571,
O-Ring: FPM (Viton)
Partnumber
9+SPJU501 16 ADJUSTABLE ELBOW HEAVY
SERIES/METRIC/METALL.SEALING. 9+SPJU 1.4571/FPM/+1SKA
Edition: 2005-01
9+SPJU
Page 22
L1 L1
l1 l1
S2 S2
S3 S3
D
s
L2
S2 S2
L2
O-Ring O-Ring
S1 S1
Sealing shoulder Sealing shoulder
according to according to
DIN3852/Type B DIN3852/Type B
i
i
G G
G1 G1
d3 d3
Edition: 2005-01
Standard
Item group: Pressurized joints
9+SPJUB
Item: Unions (Body only)
Page 1 of 3
Example of Male stud coupling, heavy series, for tube outside diameter OD = 16 mm,
Designation: with test report 2.2, stud acc. to DIN 3852 part 2, Whitworth pipe thread,
Material: stainless steel 1.4571
Partnumber
9+SPJUB04 16 MALE STUD COUPLING / HEAVY SERIES
WHITWORTH/DIN2353/DIN3852-2 9+SPJUB CERT: 2.2 1.4571
Material Partnumber
Carbon Steel 9+SPJUB01
Stainless Steel 9+SPJUB02
Stainless Steel 1.4541 9+SPJUB03
Stainless Steel 1.4571 9+SPJUB04
Steel durnicoated 9+SPJUB05
Steel nickel plated 9+SPJUB06
Brass 9+SPJUB07
S1
d1
i l1
Tube G l1 i d1 S1 Weight
OD. kg /piece
6 G 1/4 A 13 12 18 19 0,05
8 G 1/4 A 15 12 18 19 0,06
10 G 3/8 A 15 12 22 22 0,09
12 G 3/8 A 17 12 22 22 0,10
14 G 1/2 A 19 14 26 27 0,15
16 G 1/2 A 18,5 14 26 27 0,16
20 G 3/4 A 20,5 16 32 32 0,26
25 G1A 23 18 39 41 0,49
30 G 1 1/4 A 23,5 20 49 50 0,66
38 G 1 1/2 A 26 22 55 55 0,90
Page 2
Example of Adjustable stud elbow, heavy series, for tube outside diameter OD = 16 mm,
Designation: with test report 2.2, stud acc. to DIN 3852 part 2, Whitworth pipe thread,
Material: stainless steel 1.4571
Partnumber
9+SPJUB14 16 ADJUSTABLE ELBOW / HEAVY SERIES
WHITWORTH/DIN2353/DIN3852-2 9+SPJUB CERT: 2.2 1.4571
Material Partnumber
Carbon Steel 9+SPJUB11
Stainless Steel 9+SPJUB12
Stainless Steel 1.4541 9+SPJUB13
Stainless Steel 1.4571 9+SPJUB14
Steel durnicoated 9+SPJUB15
Steel nickel plated 9+SPJUB16
Brass 9+SPJUB17
l1
S3
S2
L2
O-Ring
S1
Sealing acc. to
DIN 3852 part 2 / type B
i
G
d3
Workmanship acc. to DIN 2353.
Tube Weight
G L2 l1 i d3 S1 S2 S3
OD. kg / piece
6 G 1/4 A 40 16 12 19 19 17 12 0,10
8 G 1/4 A 42,5 17 12 19 19 19 14 0,12
10 G 3/8 A 45 17,5 12 22 22 22 17 0,17
12 G 3/8 A 48 21,5 12 22 22 24 17 0,20
14 G 1/2 A 54 22 14 27 27 27 19 0,29
16 G 1/2 A 55 24,5 14 27 27 30 24 0,35
20 G 3/4 A 65 26,5 16 32 32 36 27 0,55
25 G1A 73 30 18 40 41 46 36 1,10
30 G 1 1/4 A 78,5 35,5 20 50 50 50 41 1,40
38 G 1 1/2 A 89 41 22 55 55 60 50 1,99
Edition: 2001-03
9+SPJUB
Page 3
Example of Welding connection, heavy series, PN 250, for tube outside diameter OD = 16 mm, with test report 2.2,
Designation: Material: stainless steel 1.4571
Partnumber
9+SPJUB24 16 WELDING CONNECTION / HEAVY SERIES
DIN2353 9+SPJUB CERT: 2.2 1.4571
30°
S1
D1
D
L1
Edition: 2001-03
Standard
Itemgroup: Pressurized joints
Item: High pressure hydraulic banjo fittings 9+SPJUH
Page 1 of 6
Example of Designation of a high pressure hydraulic stud elbow banjo fitting with metric stud thread and sealing ring DKA,
Designation: Series S for tube outside diameter Da = 20 mm, with works report 2.2,
material: stainless steel
Partnumber
9+SPS373W 20 H.P.ELBOW BANJO FITTING
SERIES S/MET.SEAL. 9+SPJUH STAINL./2.2
Partnumbering Code
Position of Partnumber
1. - 4. 5. 6. 7. - 8. 9.
3) 2) 1)
Kind of part Series Type of fitting Material Certificate
Code Cd. Cd. Cd. 4) Cd.
High pressure hydraulic Fittings with 3.1B 1
High pressure Series L L stud elbow banjo fitting 1 Cutting Ring 5) 2.2 W
hydraulic 9+SP (light) Whitworth-thread Steel (St) 26 2.1 B
banjo fitting Sealing ring DKA Steel nickel or 27
6) cadmium plated
Series S S High pressure hydraulic Steel durnicoated / 29
(heavy) stud elbow banjo fitting 2 Stainless steel
Whitworth-thread Stainless steel 73
7) Sealing ring KDS 1.4571 79
PN315 H Brass 85
High pressure hydraulic Brass / Stainless steel 86
stud elbow banjo fitting 3 Brass / Steel 87
Metric-thread
Sealing ring DKA Fittings with
Welding Nipple
1) Materials acc. to table 1 on page 2 High pressure hydraulic Steel nickel plated / MP
stud elbow banjo fitting 4 Stainless steel /
2) Code for type of fitting. Metric-thread NBR (O-Ring)
Cutting ring or welding nipple Sealing ring KDS Steel nickel plated / MV
with O-ring are parts of the fittings, Stainless steel /
indicated weights however High pressure hydraulic FPM (O-Ring)
refer only to cutting ring fittings. stud tee banjo fitting 5 1.4571 / NBR (O- NN
Ring)
Whitworth-thread Stainless steel / NP
3) Code for series. Sealing ring DKA NBR (O-Ring)
Stainless steel / NV
4) Certificate acc. to EN10204 High pressure hydraulic FPM (O-Ring
(DIN 50049) stud tee banjo fitting 6 Steel / NBR (O-Ring) SP
Whitworth-thread Steel / FPM (O-Ring) SV
5) For cutting ring fittings Sealing ring KDS Steel nickel plated / ZP
other sealings are made of NBR NBR (O-Ring)
(unless otherwise specified High pressure hydraulic Steel nickel plated / ZV
in the order). stud tee banjo fitting 7 FPM (O-Ring)
Metric-thread
6) Nozzle thickness corresponds with Sealing ring DKA
welding nipple thickness "heavy series"
of VAI-Std. H330 High pressure hydraulic
stud tee banjo fitting 8
7) Nozzle thickness corresponds with Metric-thread
welding nipple thickness "PN 315" Sealing ring KDS
of VAI-Std. H330
Material Material Body / Cutting- Welding- Nut O-Ring Sealing Application for
Code Nozzle Ring Nipple or shoulder ring
sealing ring
Steel 26 Steel Steel - Steel NBR Steel Steel tube DIN2391
Steel nickel or 27 Steel nickel or Stainless - Steel nickel or NBR Steel nickel or Stainlesssteel tube
cadmium plated cadmium plated steel cadmium plated cadmium plated
Steel durnicoated / 29 Steel Stainless - Stainless steel NBR Steel Stainless steel tube
Stainless steel *) durnicoated steel 1.4571 nickel plated
Stainless steel 73 Stainless steel Stainless - Stainless steel NBR Stainless steel Stainless steel
1.4571 steel 1.4571
1.4571 79 1.4571 Stainless - 1.4571 NBR 1.4571 Stainless steel
steel
Copper tube
Brass 85 Brass Special- - Brass NBR Copper
DIN1754
Brass
Copper tube
Brass / 86 Brass Stainless - Brass NBR Copper
DIN1754
Stainless steel steel
Brass / Steel 87 Brass Steel - Brass NBR Steel Steel tube
St nickel plated / *) MP, MV Steel - Stainless steel Stainless steel NBR, FPM Steel Stainless steel tube
Stainl.St./NBR,FPM durnicoated 1.4571 1.4571 nickel plated
1.4571 / NBR, FPM NN, NF 1.4571 - 1.4571 1.4571 NBR, FPM 1.4571 Stainless steel tube
Stainless steel / NP, NV Stainless steel - Stainless steel Stainless steel NBR, FPM Stainless steel Stainless steel tube
NBR, FPM 1.4571 1.4571 1.4571
Steel / NBR, FPM SP, SV Steel - C15 or C22 Steel NBR, FPM Steel Steel tube DIN2391
Steelnickel plated / ZP, ZV Steel - Stainless steel Steel NBR, FPM Steel Stainless steel tube
NBR, FPM nickel plated 1.4571 nickel plated nickel plated
Edition: 2006-10
When thin-walled or softtubes (e.g.: copper) are used it is recommended to use reinforcements jackets.
Page 3
L2
l2
S6 O-Ring
S2
S3
L3
l3
h
h
i
d3 d4
Design with sealing ring DKA Design with soft seal KDS
(DIN3852/d4 small) Inner ring of NBR vulcanized
(DIN3852/d4 small)
Dimensions in mm
Tube- Male Weights
Outside Series Nom. Stud d3 d4 i h l2 l3 L2 L3 S2 S3 S6 kg / 100 pcs.
diameter press. G DKA KDS
Edition: 2006-10
9+SPJUH
Page 4
L2
l2
S6 O-Ring
S2
S3
L3
l3
h
h
i
d3 d4
Design with sealing ring DKA Design with soft seal KDS
(DIN3852/d4 small) Inner ring of NBR vulcanized
(DIN3852/d4 small)
Dimensions in mm
Tube- Male Weights
Outside Series Nom. Stud d3 d4 i h l2 l3 L2 L3 S2 S3 S6 kg / 100 pcs.
diameter press. G DKA KDS
Edition: 2006-10
9+SPJUH
Page 5
L2
l2
S2 S3 S6 O-Ring
L3
l3
h
h
i
d3 d4
Design with sealing ring DKA Design with soft seal KDS
(DIN3852/d4 small) Inner ring of NBR vulcanized
(DIN3852/d4 small)
Dimensions in mm
Tube- Male Weights
Outside Series Nom. Stud d3 d4 i h l2 l3 L2 L3 S2 S3 S6 kg / 100 pcs.
diameter press. G DKA KDS
Edition: 2006-10
9+SPJUH
Page 6
L2
l2
S2 S3 S6 O-Ring
L3
l3
h
h
i
d3 d4
Design with sealing ring DKA Design with soft seal KDS
(DIN3852/d4 small) Inner ring of NBR vulcanized
(DIN3852/d4 small)
Dimensions in mm
Tube- Male Weights
Outside Series Nom. Stud d3 d4 i h l2 l3 L2 L3 S2 S3 S6 kg / 100 pcs.
diameter press. G DKA KDS
Edition: 2006-10
Standard
Itemgroup: Pressurized joints
9+SPJZ001
Item: Extension for lubrication
Page 1 of 1
22
Pipeø 13,5 x 2,9 SW 19
DIN 2462
G 1/4"
R 1/4"
4
15 15
18
RODIKS-material-take-off (MTO):
ABM2 is the total length 'L' in mm
min. 8
ød2
ød1
DN 1 DN 2
s
RODIKS-material-take-off (MTO):
The nominal diameter (DN 1, DN 2) shall be used for the input in the RODIKS-material-take-off.
Page 2
min. 8
ød2
ød1
DN 1 DN 2
RODIKS-material-take-off (MTO):
The nominal diameter (DN 1, DN 2) in mm shall be used for the input in the RODIKS-material-take-off.
Remarks: 1) Dimensions in mm
2) Weights are reference values
Edition: 2003-03
Standard
Itemgroup: Special constructions
60
38
1 20 20
20
30
6 86
5
60
R9
20
5
ø5
2
6
adjust spray header
3 before welding;
6 to be welded during 30°
spray header installation;
4 5
3
5
5
ø5
30
20
100 6
6
RODIKS-material-take-off (MTO):
16 16
3
5,4
RODIKS-material-take-off (MTO):
5
ø2
ø3,4
RODIKS-material-take-off (MTO):