The document provides 7 step instructions for replacing the peristaltic pump tube on a pH controller. The steps are to: 1) disconnect power; 2) remove screws from pump cover; 3) remove transparent cover; 4) remove pump rotor and tube by rotating cover anticlockwise 30 degrees; 5) fit replacement rotor and tube by reversing previous steps and aligning gear shaft; 6) lock rotor and tube in place by rotating clockwise until a click is heard; and 7) replace cover and screws and test pump operation.
Original Description:
Bluelab
Original Title
How to replace pump cassette - Bluelab pH Controller
The document provides 7 step instructions for replacing the peristaltic pump tube on a pH controller. The steps are to: 1) disconnect power; 2) remove screws from pump cover; 3) remove transparent cover; 4) remove pump rotor and tube by rotating cover anticlockwise 30 degrees; 5) fit replacement rotor and tube by reversing previous steps and aligning gear shaft; 6) lock rotor and tube in place by rotating clockwise until a click is heard; and 7) replace cover and screws and test pump operation.
The document provides 7 step instructions for replacing the peristaltic pump tube on a pH controller. The steps are to: 1) disconnect power; 2) remove screws from pump cover; 3) remove transparent cover; 4) remove pump rotor and tube by rotating cover anticlockwise 30 degrees; 5) fit replacement rotor and tube by reversing previous steps and aligning gear shaft; 6) lock rotor and tube in place by rotating clockwise until a click is heard; and 7) replace cover and screws and test pump operation.
4 Remove pump rotor & tube, by rotating the clear plastic
cover anticlockwise about 30˚.
5 Fit replacement rotor & tube by doing reverse of
previous steps. Ensure gear shaft aligned before pushing it down into body. 6 Ensure rotor & tube unit is locked into place by rotating clockwise until a “click” is felt. The tubes should be in vertical alignment. 7 Replace cover & screws. Reconnect power and test pump operation with Pump Override in menu. 1