16 Mo067834-02
Specifications Section
Cylinder Head Valves
1.10. 5.1.4, 7,13
1
15
24
2 9 3 6 2 8 14 ai
(A
invaton 18 012802553
Tightening sequence
Refer to llustation 18 forthe tightening sequence of :
the valve cover bolts,
(1) Bots or coo
Torque for bolts . 20N-m (1511) "PICA exame
(2) Valve mechanism cover
(3) Hamess connector
(4) Integral breather
Note: Apply engine oil tothe valve stems prior to
installation in the cylinder head.
(1) Valve springs
Inner Spring
‘Assembled length ..... 60.14 mm ((2.368 inch))
Load at assembled length. 1502 12N
(3431)
Operating length (minimum). ........ 44.02 mm
(4.733 inch)
Load at minimum operating length... 400+ 18N
(904 1b)
Free length after test.
Outside diameter
71.70 mm ((2.823 inch))
25.17 mm ((0.991 inch))
Outer Spring
Assembled length .... . 67.12 mm ((2.643 inch))
Load at assembled length. ......... 320425 N.
((72#6 1b)
Operating length (minimum)......... 51.00 mm
(2.008 inch))
Load at minimum operating length. .. 900 + 45 N.
((202 + 10 1b))
76.70 mm ((3.020 inch))
36.30 mm ((1.429 inch))
Free length after test
Outside diameter
(2) Valve guide
This document is for My Engine App. NOT FOR RESALE0067834-02
7
‘Specifications Section
Bore of installed valve guide (new parts)
9.502 + 0.026 mm ((0.3741 + 0.0010 inch))
Maximum recommended diameter of the valve
guide bore £9,538 mm ((0.3755 inch))
Bore in the cylinder head for valve guides
15.97 mm ((0.629 inch))
Note: Do not use a combination of a valve and a
valve guide that has a difference of 0.13 mm
(0.005 inch) or more.
35.00 + 0.50 mm.
((1.378 £0,020 inch))
(3) Height to top of valve guide
(valve recess
Inlet (new parts). 2.20 mm to 2.80 mm.
(0.087 inch to 0.110 inch))
1.20 mm to 1.80 mm
(0.047 inch to 0.071 inch))
Inlet (reconditioned parts). . 2.20 mm to 3.29 mm
((0.087 inch to 0.129 inch))
Exhaust (reconditioned parts)
1.20 mm to 2.29 mm
((0.0472 inch to 0.090 inch))
Exhaust (new parts)
A
{ i
7 §—n
ae
inesvaton20 00640401
(6) Valve face angle
Inlet... «+++ +6075 £0.25 degrees
Exhaust 45.75 + 0.25 degrees
(6) Valve stem diameter
New valve stem diameter... 9.441 + 0.010 mm
((0.3747 + 0.0004 inch))
(7) Diameter of valve head
Inlet 47.00 mm (1.850 inch))
Exhaust 2.022.022. 41.81 mm ((1.646 inch))
(8) Minimum recommended valve lip thickness
Inlet 2.75 mm ((0.108 inch))
Exhaust 2.05 mm ((0.081 inch))
(9) Overall length of valve
Inlet . .. 202.00 + 0.45 mm ((7.953 + 0.018 inch))
Exhaust - 202.06 + 0.45 mm.
((7.955 + 0.018 inch))
erator "0864825,
Typical example
(10) Width of the vaive seat
Inlet 2.377 mm ((0.0936 inch))
Exhaust 41.508 mm ((0.0594 inch))
(11) Depth of bore in the cylinder head for the valve
seat insert
Inlet . . .. 14.00 + 0.05 mm ((0.551 + 0.002 inch))
Exhaust = 13.90 0.05 mm,
((0.547 + 0.002 inch))
(12) Inside diameter of valve seat insert
Inlet . . .. 41.00 + 0.50 mm ((1.614 + 0.020 inch))
Exhaust 36,50 + 0.50 mm,
((1.437 + 0.020 inch))
(13) Angle of valve seat face
Inlet 30.25 + 1 degree
Exhaust «+ 45.25+ 1 degree
(14) Outside diameter of valve seat insert
Inlet 48.025 + 0.013 mm
((1.8907 + 0.0005 inch))
Exhaust 42.840 + 0.013 mm
((1.6866 + 0.0005 inch))
Diameter of the bore in the cylinder head for the
valve seat insert
Inlet 47.950 + 0.025 mm
((1.8878 + 0.0010 inch))
This document is for My Engine App. NOT FOR RESALE18 Mo067834-02
Specifications Section
Exhaust 42.774 + 0.025 mm
((1.6840 + 0.0010 inch))
This document is for My Engine App. NOT FOR RESALE