Professional Documents
Culture Documents
Provisional Quantities
Note:
Rate shall include following items in all supply and Brine Line installation as per
the Factory reequipment.
Horizontal and vertical pipe supporting hanging system, special brackets at pipe
diverting points, necessary rubber cushion at each point etc.
All brackets should be dependent on the pipe laying are condition and should be
with high load bearing capacity, stronger fasteners, adequate slipping resistance
and adequate vibrate resistance. Further, if there are any condition, please mention
the quotation.
In production area pipe should be laid by SS-316L (40 mm dia) - Schedule 40 pipe
and PPR pipe (40 mm dia -PNT 20) should be laid in other areas without production
area
Brine Line
40mm diameter.
40mm diameter.
Bracketing System
The different between any two supports should be 1.2m .
Horizontal supporting
1Q/14 Gl pipe hanging clip with thread bar (above ceiling area)
or
1Q/15 Gl pipe hanging clip with thread bar (above ceiling area -hot dipped)
Vertical supporting
1Q/18 SS pipe hanging clip (180 mm) couple with SS pipe hanging clip (40 mm)
Note : When your quoeting, please consider your safety equipment as well as. Such as scaffolding, safety harness, la
supply any safety. The welding in SS pipes should be gas purged and welders should be qualified as well. item
QTY. UNIT Rs . Rs
15 m
70 m
10 nos
2 nos
4 nos
2 nos
2 nos
8 m
2 nos
2 nos
2 nos
2 nos
55 nos
55 nos
8 nos
8 nos
8 nos
1 Item