Professional Documents
Culture Documents
Toshiba Asteion 4 Slice CT Scanner
Toshiba Asteion 4 Slice CT Scanner
Product Data
No. MPDCT0237EAB
Su per 4 Edition
APPLICATION
The Asteion ¡s a multislice Helical CT scanner that sup-
ports whole-body scanning.
The system generales 5.3 slices per second using a
Selectable Slice-thickness Multi-row Detector (SSMD).
Since it can also perform high speed reconstruction at a
máximum 4 ¡mages per second, every examination can be
processed at ultra-high speed. In combination with the
Continuous Imaging technology, ¡t is possible to quickly
perform more accurate scanning and examinations.
FEATURES
• High-speed scanning
Four slices can be acquired simultaneously in a single
rotation. In the case of a run-off study from the shoutder
to the pelvis of an adult patient, 720 mm can be scanned
within 16,5 s with 5-mm data acquisition. Tilt helicai scanning
TCOT cone-beam reconstruction, which uses the
• Long scanning range Feldkamp method to precisely compénsate for the angu-
The long scanning range of 1.800 mm and the high lation of the bearn, enables helical scanning with the
scanning speed together facilítate whole-body trauma gantry tilted in the range from 30° forward to 30° back-
examinations without repositioning of the patient. ward Angled helical acquísition is useful for many appli-
cations, ¡ncluding obtaining the correct sean plan for
• Guided mode routine brain scans. This ability makes it easy to avoid
When this function is selected. the operating procedures X-ray exposure to the patient's orbit.
are displayed on the monitor screen of the sean consolé.
Examinations can be performed by following the on- High patient throughput
screen step-by-step instructions. This enables ¡nexperi- The high cooling rate of the 4-MHU tube, which reduces
enced technologists lo handle emergency cases. the cooling time required between scans; the high scan-
ning speed, which reduces the exposure time; and the
• Excellent image quality high reconstruction speed, which reduces the patient
The system achieves a low-contrast detectability of 2 mm sean cycle time, all increase the patient throughput sig-
at 0.3% and a high-contrast resolution of 0,35 mm in the nificantly.
x. y, and z directions. The multi-tasking capabilities of the system enable
Routine multislice helicai CT examinations can be per- patient registration and protocol setting with reconstruc-
formed using slices as thin as 0.5 mm, enabling high- tion in the background and thus increase flexibility.
precision 3D and MPR images to be generated from the In addition, the system's ability to genérate ¡mages of
fine isotropic voxel data. various slice thicknesses from a single data set permits
acquisition for routine examlnations, biopsy procedures,
• Exposure dose reduction and 3D image generation to be performed in a single
The detector system has an excellent S/N ratio, which sean.
permits examinations with a reduced exposure dose. In For example, it is possible to reconstruct 5-mm images
helicai scanning, the Fíeal-EC function, which makes the for routine examinations, 1-mm images for detailed
amount of noise uniforrn for each slice, can be selected examinations, and 0.5-mm slice images for 3D image
in an eXam Plan, making the minimization of unneces- generation from a single data set acquired by helical
sary patient exposure easy. scanning with 0.5-mm slices.
Super 4 Edition
COMPOSITION
Mínimum couch-top
height: Approx. 310 Max. 1,750 mm/scan (for the
Máximum couch-top long paticnt couch versión)
height: Approx. 850 mrn Max 1,450 mm/scan (for the
1 Couch-top movement short patient couch versión)
System: Motor-driven or manual Up to 10 sean plans are pro-
- Speed of movement: 130 mm/s (fasl) grammable in one eXam Plan.
10 mm/s (síow) (Múltiple and/or Multi-directional
-Stroke: 2.190 mm (for the lonq palien! Helical)
couch versión) Helical sean is possible in the
1.890 mm (for (he shoit palieni range from 30'' forward to 30''
couch versión) backward (only for 16-slice
- Scannable range: 1.800 mm (for Ihe lonq palien! acquisition).
(with headrest) couch veision) The couch-top speed can be
1,500 mm (loi Ihe shorl palien! specified in the range from
couch versión) 0.83 mm/s to 53.3 mm/s.
• Step feed pitch: 0.5 lo 600 mrn in 0.5-mm
increments Setting is possible in the range
- Reproducibility: ±0.25 mm from 2.5 to 8.0 in increments of
Repoalable lo within 0.5, excluding 4.0.
±0.25 mm after GOO-rnm move- (Pitch factor: 0.625 to 2.0)
ment
470 mm Holical pitch = Couch-top movement
• Remote control from the consolé is possible. (mm/i'ol.)/nominal scanning
Note: Fhis lunction alíows the user to check the image 011 Ihe slice thickness (mm)
consolé and adjust to the couch-top withoi.il leaving ¡he CT pitch factor = Helical pltch/number of slices
consoló. Adjustment is possible in 10-nini incrementa a! scanned in a single rotation
Ihe consolé
•-Jolf?
• Load limit
Max. allowable load: 205 kg (450 Ib)
• Footswitch: Either the vertical movement or • Real-EC: Function for continuously vary-
Auto set/Auto horne (unction can ing the X-ray tube current to
be selected. ensure the optimal X-ray dose
during helical scanning
Voice-recorded instruction and sean system
(VoiceLink) Up to 4 images/s
Voice instruclions lo the patíent can be recorded eleclroni- Real-fime Helical
cally by the operator and automaticaíly played back during reconstruclion time: 12 images/s (0.083 s/image)
sean sequences as parí of the cXarn F-'lan. SureStart:
• Number Continuous
of messages: Max. 32 rnessages sean time: Max. 100 s
• Number Región of ínteres!
of seconcls: Max. 128 s for a lolal oí 32 mes- (ROÍ): Max. 3 ROIs
sages CT number
Delay time setting: The delay time between the end measuiement interval: 0.125 s (8 measurements/s)
of fhe message and the start oí Sean start delay time: Min. 3 s
scanning can be sel up lo 10 s Mean CT number. elapsed time
in incrcmenls oí 1 s.
Can be sel with a mínimum of
Helical sean 0.1-mm increments.
• X-ray tube rotation Image slice thickness: Can be sel to a valué of up to 5
speed: 0.75. 1, 1.5s/3GO times that of the sean slice
• Continuous thickness. However, the máxi-
sean time: Max. 100 s mum image slice thickness is 10
• Sean start time delay: Min. 1 s mm. (MUSCOT reconstruction)
Setting is possible in increments Reconstruction method:
of 0.1 s. MUSCOT Reconstruction (MUItiSlice COne-beam
iechnology)
TCOT reconslruction (True COne-beam Technology)
/fsteiqjn
Super 4 Eefítion
The relationships between the slice thickness and the X-ray generation
¡maging área scanned in 7.5 s (0.75 s, 10 rotations) in • X-ray exposure: Continuous
the longitudinal direction are shown for helical pilches • X-ray tube voltage: 80, 120, and 135 kV
3.0, 4.5, and 6.0. • X-ray tube current: 10 mA to 300 mA (260 mA for
135 kV) (in incrernents of 10 mA)
Image slice Setting slice Helical pitch (Note)
• X-ray tube heat capacity:4.0 MHU
thickness thickness 3.0 4.5 6.0 • X-ray tube cooling rate: Max. 864 kHU/min
0.5 mm 0.5 mm 15.0mm 22.5 mm; 30.0 mm • Focal spot size
1 mm 1 mm SO.Omm 45.0mm : 60.0 mm - IEC 60336(1993)
nominal : 0.9 mm x 0.7 mm (small)
2 mm 2 mm 60.0 mm 9O.O mm 120.0 mm
1.4 mm x 1.4 mm (large)
5 mm 5 mm 150.0 mm 225.0 mm:300.0 mm
X-ray detection
Note: The couch-top traveling dístance per rotation is shown in • Detection system: Solid-state detectors
proportion to the slice thickness
• Main detector: 788 channels x 22 elements
• Data acquisition: 788 channels x 4 rows
Dynamic sean
• Reference detector: 1 set
• Sean time: 0.75, 1, 1.53/360°
• View rate: Max. 1,200 views/s
• Programmable time: Max. 1 hour
This refers to the máximum timo
Data processing
within which a series oí scans
• Reconstruction matrix: 512 x 512 pixels
are performed following a pre-
• Picture element (pixel) size
determmed eXam Plan.
CT image: Unit: mm
Number of
programmable scans: Sean field ss s M L LL
A to *to 'to 'to *to
Píxel size
0.35 0.47 0.63 0.76 0.94
• Sean plan
-Sean interval: Min. interval: 1 s (if an interval is
- Scanogram: Unit: mm
set).
(Note that "None" (no interval) Enlargement
Standard 2x 4x
can be seleciecl.) ratio
Setting is possible in incrernents Pixel size 1.00(L) 0.71 0.50
of 0.1 s in a sean interval more (área) 0.50 (S)
than 1 s.
*: Depending on the Vari-Area or Zoom factor
Note: When a scanning mode with patient couch movement is
used, the mínimum sean interval ís increased by the time
Reconstruction filter functions
required for movement
Functions for the abdomen with BHC
• Sean start delay time: Min. 0,5s Functions for the abdomen without BHC
Setting is possible in increments - Functions for the brain with BHC
o f O . 1 s. - Functions for the brain without BHC
• Sean rate: Max. 133 scans/100 s Functions for the inner ear and bone
(0.75 s sean, 133 rotations) - Functions for the lung
• Image reconstruction - Functions for high-resolution test mode
- Number of images: Max. 4 images/scan Functions for auditory ossicles and the spine/with high-
- Image interval: Reconstruction is possible in resolution processing
¡ncrements of 0.1s. - Functions for maintenance
• Reconstruction time: Mm. 0.5 s 1 Image reconstruction time
• Real-time reconstruction Image reconstruction
time: 12 images/s (0.083 s/image) time: Up to 4 images/s
Scanoscopy: Real-time
- Real-time
reconstruction: 12 images/s (1 slice)
24 images/s (3 siices)
Note: Real-time reconstruction of 3 siices is only for CT fluo-
roscopy (option). For helícal sean, dynamíc sean, and
SureStart. real-tíme reconstructíon is for 1 slice.
MPDCT0237EAB
Ambient conditions
Temperature(*1) Humidity Hea! generatíon o
Sean room
Gantry
I
O Gantry 0 Consolé
Q Patienl couch
17
17
12
|~ Speaker -| -¡
[sean roomj
Ganlry k
17
12 11
\\8
/ 18
I lint, ni
11
Super 4 Edition
OUTLINE DRAWINGS
12
MPDCT0237EAB
OUTLINE DRAWINGS
°
• o
^o
o gy
o •
'i
u
_890 (35.0)
_ 360
i (14) *f" <21>
4» - 3o-
(TILTIANGLEV
f t
(126) (21.0)
Gantry
13
/¡stevqfí
Super 4 Edition
OUTLINE DRAWINGS
o LO o
2,190 2,187
(86.2) (86.1)
t
430* I 1,862 2.690
(17) (73.3) (105.9)
14
MPDCT0237EAB
OUTLINE DRAWINGS
El"
1,890 1,887
(74.4) (74.3)
LU
£¿ O —-
§i-n »wE S2
S
,-A'I o ^S
^O t. • ^
-±=5
15
MPDCT0237EAB
Super 4 Edition
OUTLINE DRAWINGS
uu
I
t /
1,600
C (63.0)
100(3.9)
Consolé
hup://www.toshibami'«.licals; su-nis.com
f MadeforLife -hih.i MfdHM! Svst^riK Orpnulron nii-Ms Toslnki ic.i! S\sloms Corporation Nn?ü ope'
^n.ilir>iintlvttH;oorti:^()'ít l ninlrirdsf()i Ulsalsl1, Itit-tnv
m,H|,'iiH''ntS..'íl.-'tiF.!"->ÍK>1 ISO Utíifi