Professional Documents
Culture Documents
Make three
Cut along the inside lines as shown. each of these parts.
2) Attach A1 ~ D2. Stand the A1 and A2 parts up Put one C1 and one C2 together as a set,
at right angles, and attach B1 and glue them around A1/A2,
and then B2. attaching them to the glue spots.
Attach A1 and A2 to Only attach two C1/C2 sets.
the back of D1 as shown.
Explanation of symbols
*Attach the two A1s
Mountain fold (Dotted line) opposite each other.
Valley fold (Dashed and dotted line) Attach the back side of D1
to the back side of D2. *Keep one C1/C2 set aside.
Scissors line (Solid line)
Cut in line (Red solid line) 3) Cut out E1 ~ E4, and glue them together. Fold E3 in half,
Attach E4 so that it covers up
the cut on E3.
glue the back sides together
Glue tab and cut out the piece as shown.
Glue the reverse sides of E1 and
Cutout E2 together, and curve the pieces
before the glue dries.
Assembly tip
Caution: This craft requires the use of glue, scissors, and other tools
which may be dangerous to young children. Please keep them out of *Glue them together Attach E4 to E1.
*Put the E1 side face up.
reach of children while you work. beginning in the center.
Bird Cage : Canary [Assembly Instructions]
Canary 1) Cut out F1 ~ F3, Swings Finish 1) Attach the canary to the swings.
and add curves to each piece.