Professional Documents
Culture Documents
MAX9617–MAX9620
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
General Description Benefits and Features
The MAX9617–MAX9620 are low-power, zero-drift oper- S Extends Battery Life
ational amplifiers available in space-saving SC70 pack- • Low 59µA Quiescent Current
ages. They are designed for use in portable consumer, • Single 1.8V to 5.5V Supply Voltage Range
medical, and industrial applications.
• Power-Saving Shutdown Mode (MAX9619)
The MAX9617–MAX9620 feature rail-to-rail CMOS inputs
S Supports a Wide Range of Precision Applications
and outputs, a 1.5MHz GBW at just 59FA supply current
and 10FV (max) zero-drift input offset voltage over time • Very Low 10µV (max) Input Offset Voltage
and temperature. The zero-drift feature reduces the high • Ultra-Low 10pA Input Bias Current
1/f noise typically found in CMOS input operational ampli- • 1.5MHz GBW
fiers, making it useful for a wide variety of low-frequency • Unity-Gain Stable
measurement applications. • 0.42µVP-P from 0.1Hz to 10Hz
The MAX9617 and MAX9619 are available in a space- • 42nV/√Hz at 1kHz
saving, 2mm x 2mm, 6-pin SC70 package. The MAX9619 • Rail-to-Rail Inputs and Outputs
features a power-saving shutdown mode. The MAX9618
is available in a 2mm x 2mm, 8-pin SC70 package. The S Saves Board Space
MAX9620 is available in a 2mm x 2mm, 5-pin SC70 • 5-Pin SC70 (MAX9620), 6-Pin SC70 (MAX9617/
package. All devices are specified over the -40NC to MAX9619), and 8-Pin SC70 (MAX9618) Packages
+125NC automotive operating temperature range.
Block Diagram
VIN
+5V
MAX9617
ADC
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com. 19-4753; Rev 8; 9/20
MAX9617–MAX9620
Single/Dual SC70, Zero-Drift,
High-Efficiency, 1.5MHz Op Amps with RRIO
ABSOLUTE MAXIMUM RATINGS
IN+, IN-, SHDN, (VDD to GND)................................-0.3V to +6V 6-Pin SC70 (derate 3.1mW/NC above +70NC)...........245.4mW
OUT to GND.............................................. -0.3V to (VDD + 0.3V) 8-Pin SC70 (derate 3.1mW/NC above +70NC)..............245mW
Short-Circuit Duration to Either Supply Rail, Operating Temperature Range......................... -40NC to +125NC
OUT, OUTA, OUTB............................................................. 10s Junction Temperature......................................................+150NC
Continuous Input Current (any pins)................................ ±20mA Storage Temperature Range............................. -65NC to +150NC
Continuos Power Dissipation (TA = +70NC) Lead Temperature (soldering, 10s).................................+300NC
5-Pin SC70 (derate 3.1mW/NC above +70NC)..............247mW Soldering Temperature (reflow).......................................+260NC
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +3.3V, VGND = 0V, VIN+ = VIN- = VDD/2, RL = 100kI to VDD/2, TA = -40NC to +125NC, unless otherwise noted. Typical values
are at +25NC.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
POWER SUPPLY
Guaranteed by PSRR, 0NC P TA P +70NC 1.6 5.5
Supply Voltage Range VDD V
Guaranteed by PSRR, -40NC P TA P +125NC 1.8 5.5
Supply Current TA = +25NC 59 78
IDD FA
(per Amplifier) -40NC P TA P +125NC 111
TA = +25NC 119 135
Power-Supply Rejection Ratio VDD = 1.8V to 5.5V
PSRR -40NC P TA P +125NC 107 dB
(Note 2)
0NC P TA P +70NC, VDD = 1.6V to 5.5V 116 135
Power-Up Time tON VDD = 0V to 3V step, AV = 1V/V 20 Fs
Shutdown Supply Current ISHDN MAX9619 only 300 nA
Turn-On Time from Shutdown
tOSD VDD = 3.3V, V SHDN = 0V to 3.3V step 50 Fs
(MAX9619)
DC SPECIFICATIONS
TA = +25NC 0.8 10
Input Offset Voltage (Note 2) VOS FV
-40NC P TA P +125NC 25
Input Offset Voltage Drift (Note 2) DVOS 5 120 nV/NC
TA =+25NC 31 80
Input Bias Current (Note 2) IB -40NC P TA P +85NC 95 pA
-40NC P TA P +125NC 580
Input Offset Current IOS 5 pA
Guaranteed by TA = +25NC -0.1 VDD + 0.1
Input Common-Mode Range VCM V
CMRR test -40NC P TA P +125NC -0.1 VDD + 0.05
-0.1V P VCM P VDD + 0.1V, TA = +25NC 122 135
Common-Mode Rejection Ratio
CMRR -0.1V P VCM P VDD + 0.05V, dB
(Note 2) 116
-40NC P TA P +125NC
20mV P VOUT P VDD - 20mV,
120 138
RL = 100kI to VDD/2
Open-Loop Gain (Note 2) AVOL dB
150mV P VOUT P VDD - 150mV,
123 160
RL = 5kI to VDD/2
MAX9617 toc02
18
20 16
14
FREQUENCY (%)
FREQUENCY (%)
15 12
10
10 8
6
5 4
2
0 0
0 1 2 3 4 -0.03 -0.02 -0.01 0 0.01 0.02 0.03 0.04
OFFSET VOLTAGE (FV) OFFSET VOLTAGE DRIFT (FV/NC)
MAX9617 toc05
MAX9617 toc03
MAX9617 toc04
90
100 5
TA = +125NC 80
SUPPLY CURRENT (FA)
70 4
80
TA = +125NC
60 TA = -40NC
VOS (FV)
TA = +25NC
60 50 3
TA = -40NC 40 TA = +25NC
40 2
30
20
20 1
10
0 0 0
1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 -50 -25 0 25 50 75 100 125 -0.1 0.4 0.9 1.4 1.9 2.4 2.9 3.4
SUPPLY VOLTAGE (V) TEMPERATURE (NC) INPUT COMMON MODE (V)
MAX9617 toc08
5 250 120
INPUT BIAS CURRENT (pA)
100
4 200
CMRR (dB)
VOS (FV)
80
3 150
60
2 100 NONINVERTING INPUT
40
1 50 20
INVERTING INPUT
0 0 0
-50 -25 0 25 50 75 100 125 -0.1 0.4 0.9 1.4 1.9 2.4 2.9 3.4 0.1 1 10 100 1k 10k 100k 1M 10M
TEMPERATURE (NC) INPUT COMMON MODE (V) FREQUENCY (Hz)
MAX9617 toc10
0.38
120
120 0.36
100 0.34
100 0.32
CMRR (dB)
VOH (mV)
PSRR (dB)
80
0.30
80 60 0.28
40 0.26
60 0.24
20
0.22
40 0 0.20
-50 -25 0 25 50 75 100 125 0.1 1 10 100 1k 10k 100k 1M 10M -50 -25 0 25 50 75 100 125
TEMPERATURE (NC) FREQUENCY (Hz) TEMPERATURE (NC)
MAX9617 toc13
MAX9617 toc14
0.38 140
0.34 100
1000
0.32 80
VOL (mV)
0.30 60
0.28 40
100
0.26 20
0.24 0
0.22 -20
0.20 -40 10
-50 -25 0 25 50 75 100 125 -10m 100m 1 10 100 1k 10k 100k 1M 10M 0.1 1 10 100 1k 10k 100k
TEMPERATURE (NC) FREQUENCY (Hz) FREQUENCY (Hz)
MAX9617 toc16
INPUT CURRENT NOISE (fA/√Hz)
0.1FV/div 100
10
1s/div 0.1 1 10 100 1k 10k
FREQUENCY (Hz)
-5
SMALL-SIGNAL GAIN (dB)
-10
-10
-20
-30
-25
-40
-30
-35 -50
10 100 1k 10k 100k 1M 10M 10 100 1k 10k 100k 1M 10M 100Fs/div
FREQUENCY (kHz) FREQUENCY (kHz)
MAX9617 toc21
100mVP-P VIN = 100mVP-P
AV = 1V/V
SHDN
CAPACITENCE (pF) 1V/div
500mV/div 1000
UNSTABLE OUT
1V/div
100
100Fs/div 0.1 1 10 100 1000 20Fs/div
ISOLATION RESISTOR (I)
Pin Configurations
TOP VIEW
+ + + +
IN+ 1 6 VDD OUTA 1 8 VDD IN+ 1 6 VDD IN+ 1 5 VDD
Pin Description
PIN
NAME FUNCTION
MAX9617 MAX9618 MAX9619 MAX9620
1 — 1 1 IN+ Positive Input
2 4 2 2 GND Ground
3 — 3 3 IN- Negative Input
4 — 4 4 OUT Output
5, 6 8 6 5 VDD Positive Supply Voltage. Bypass to GND with a 0.1FF capacitor.
— — 5 — SHDN Shutdown. Pull shutdown low to activate shutdown mode.
— 1 — — OUTA Channel A Output
— 2 — — INA- Channel A Negative Input
— 3 — — INA+ Channel A Positive Input
— 5 — — INB+ Channel B Positive Input
— 6 — — INB- Channel B Negative Input
— 7 — — OUTB Channel B Output
VIN
+5V
MAX9617
ADC
Block Diagram
TOP VIEW
INA- 2 - 7 OUTB
+ + +
GND 2 5 VDD + GND 2 5 SHDN GND 2
- 6 INB- - -
INA+ 3 -
Package Information
For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the
drawing pertains to the package regardless of RoHS status.
maxim
integrated TM
maxim
integrated TM
maxim
integrated TM
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent
licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and
max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
12 Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000
© 2020 Maxim Integrated Products, Inc. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
Mouser Electronics
Authorized Distributor