Professional Documents
Culture Documents
Tutorial 0 Jan 11 Problems
Tutorial 0 Jan 11 Problems
PROBLEM 2:
A tool and die manufacturer is selecting one among 4 different EDM machines for its tool/die operation. Trials
runs of 5 workpieces are done on each of the 4 EDM machines. The specifications for one of the critical
dimension of the trial run part are 15.500 ± 0.005 (in). Rank the 4 ECM machines from best to worst in
terms of accuracy and consistency.
2413
PROBLEM 3:
The tensile strength for a beam is following a normal distribution. The mean is 500 (MPa) and the standard
deviation is 50 (MPa). Find the probability that a randomly selected beam of this type has a tensile strength
greater than 650 (MPa) = ?
Z = (650-500)/50 = 3.0 Look in table and get 0.9987 1 – 0.9987 = 0.0013 = 0.13% of a beam being greater
than 650