You are on page 1of 2

GST-HX-240B

Addressable Sounder
Strobe
Description Terminals and Installation Holes

GST-HX-240B Addressable Sounder and Strobe The base of sounder is suitable to be installed
is a field alarm device sending out audile and onto European style backbox.
visual notification signal. It will send out sound
and light signals while receiving fire signal from
the fire alarm control panel in the system to warn There are four terminals with marks on the base.
people on site in the case of fire. D1 & D2: 24VDC power supply, non-polarized
Z1& Z2: Loop power supply, non-polarized

Mounting hole Mounting hole

Features and Benefits Recommended Cabling

⚫ Red plexiglass cover and multiple ultra bright 1.5mm2 or above BV cable is recommended, but
LEDs presents strong visual indication subject to local codes.
⚫ Long service life and low power consumption.
⚫ Loud fire truck alarm sound or “DIDI” sound for
option depending on different environment
⚫ Electronical coding address
⚫ Loop and DC24V wiring, no polarity
⚫ Monitoring and report the loss of 24VDC supply
⚫ Plug-in structure, simple and convenient for
installation and disassembly.

Gulf Security Technology Co., Ltd. GST-HX-240B _DS-01


http://www.gst.com.cn/en/index.asp
Note: Specifications are subject to change without notice.
Page 1 / 2
Application Technical Specification

The device appearance is shown below.


24VLoop (16V~28V)
Operating Voltage
24VDC (20V ~ 28V)
Standby Current Loop≤0.25mA Power≤1mA
Alarm Current Loop≤1.5mA Power≤10mA
Flashing Frequency 1.1Hz~1.7Hz
Alarm Volume 80dB~115dB (A weighted @3m)
Tone Cycle 3.5s~4.8s
Programming Mode Electronically addressed
Code Range One address within 1~242
Ingres protection IP43
Operating
-10°C ~ +50°C
Temperature
Relative Humidity ≤95%, non condensing
Dimension 121mm×91mm×52mm
Mounting Hole Distance60mm
Weight 144g (with base)

The sounder is wall-mount type, usually to be


installed 0.2m below to the ceiling in spaces
with regular heights, subject to local codes. Ordering Information

Part No. GST-HX-240B


Connect the D1&D2 to output of fire panel and Device Name Sounder and Strobe
Z1&Z2 to output of DC24V as below.

Gulf Security Technology Co., Ltd. GST-HX-240B _DS-01


http://www.gst.com.cn/en/index.asp
Note: Specifications are subject to change without notice.
Page 2 / 2

You might also like