Professional Documents
Culture Documents
2) 1/28
FEATURES
• Automatic frequency and interference management For more information on the SpeechLine Digital Wireless
• Speech optimized gain automatics series please refer to the SpeechLine Digital Wireless
product page at:
• License free 1.9 GHz frequency range
• Secure 256 bit AES encryption www.sennheiser.com/speechline-dw
SpeechLine Digital Wireless is a presentation solution dedicated to speech. The digital wireless microphone system is a
future-proof solution that’s easy to set up, use and manage. A microphone which lets the presenter concentrate on their
words, not on the technology.
SpeechLine Digital Wireless comprises of mobile transmitters (handheld, bodypack, tablestand and boundary) tailored
for presentation, speech optimized microphone capsules (condenser capsules, lavalier or headworn microphone) and
easy-to-integrate single-channel and multi-channel receivers. For convenience, the system relies on lithium-ion technol-
ogy with a battery lifetime of more than 15 h and flexible charging solutions of multi-device chargers or USB-charging on
the fly.
Thanks to the Automatic Frequency Management, the system always finds a free frequency (no frequency planning is
necessary anymore). The Automatic Interference Management always maintains a s connection, which makes the system
very reliable. The Automatic Sensitivity Management makes the setup even more convenient, no more gain settings are
required. With seamless network integration the system can be controlled via the Sennheiser Control Cockpit software or
media control systems (e. g. AMX, Crestron), which makes SpeechLine DW easy to monitor and to manage.
For secure communication, SpeechLine Digital Wireless uses the secure advanced 256-bit AES encryption for secure
wireless transmission.
Due to the 1.9 GHz frequency range SpeechLine DW is the future proof investment and already DD ready. Moreover, the
1.9 GHz is license free and requires no registration.
SYSTEM SPECIFICATION (V3.2) 2/28
SPECIFICATIONS
Audio sampling 24 bit/48 kHz XLR output level, max. +18 dBu
balanced
Signal-to-noise ratio > 90 dB(A)
RCA output level, max. +6 dBu
Encryption AES 256 unbalanced
RF frequency ranges EU: 1,880 to 1,900 MHz Audio effects Low cut: -3 dB at 120 Hz
USA: 1,920 to 1,930 MHz
Brazil: 1,910 to 1,920 MHz Equalizer: 7-band graphic
Taiwan: 1,880 to 1,895 MHz equalizer with
Japan: 1,893 to 1,906 MHz sound presets
Modulation GFSK with back channel
Sound pro- - female voice
Transmission method TDMA, space diversity
files: - male voice
Latency 19 ms - instrument/
Relative air humidity max. 95 % media
Temperature range* Operation: -10 °C to 55 °C Display OLED
(14 °F to 131 °F) Network protocol Media Control Protocol,
Storage: -20 °C to 70 °C TCP/IP IPv4 (DHCP, manual)/
(-4 °F to 158 °F) IPv6
* The temperature range is influenced by the battery Power supply 12 V DC
characteristics Current consumption 350 mA
AF connection sockets XLR/2 x RCA
SL MCR DW
Antenna sockets 2 x reverse SMA
RF sensitivity < -90 dBm Network sockets RJ-45
RF output power back adaptive or manual, DC socket for power hollow jack
channel up to 250 mW supply
(country-specific)
Weight approx. 828 g (1.83 lbs)
Network protocol Media Control Protocol,
UDP IPv4 (DHCP, Manual)/IPv6,
mDNS (switchable) Power supply units (for SL Rack Receiver DW)
Power supply PoE IEEE 802.3af Class 3 NT 12-4C NT 2-3
Audio outputs One 3-pin socket Nominal input voltage 100 to 240 V AC
(suitable for Phoenix Contact
MCVW 1.5-3-ST-3.81) Power frequency 50 or 60 Hz
Two Dante™ Digital Audio Input current max. 120 mA
Network sockets (RJ-45)
Nominal output voltage 12 V DC
Weight 650 g (incl. wallmount)
Standby power ≤ 0.3 W
560 g (without wallmount)
consumption
Dimensions 180 x 180 x 45 mm
Energy efficiency level V IV
(incl. wallmount)
Operating temperature -10 °C to 55 °C
Operating –10 °C to +45 °C
(14 °F to 131 °F)
temperature (14 °F to 113 °F)
Storage temperature -20 °C to +70 °C
Storage –20 °C to +70 °C
(-4 °F to 158 °F)
temperature (–4 °F to 158 °F)
Relative air humidity max. 95 %
Relative air max. 95 %
humidity Weight approx. 100 g approx. 105 g
(0.22 lbs) (0.23 lbs)
SYSTEM SPECIFICATION (V3.2) 3/28
SL Tablestand 133-S DW
Microphones
AF frequency response 75 to 20,000 Hz
MME 865-1 MKE 1
Max. input level 1.7 V RMS
Microphone type pre-polarized condenser microphone
Input impedance 30 kΩ
Sensitivity 1.6 mV/Pa 5 mV/Pa
Power supply BA 40 accupack (Li-ion, 3.6 V)
Pick-up pattern super-cardioid omni-directional
Operating time Accupack: typ. 11 h
Max. SPL 152 dB SPL 142 dB SPL
SYSTEM SPECIFICATION (V3.2) 4/28
CHG 2 CHG 4N
Charging time for full 100 % = approx. 160 min = Weight 1100 g (2.43 lbs)
charge at 20 °C green Charging bays 4
Temperature range Operation: 0 °C to 45 °C Charging voltage per bay 5V
(32 °F to 113 °F) Charging current per bay 1A
Storage: -20 °C to 70 °C
(-4 °F to 158 °F) Charging status indicator 4 LEDs per bay
(red, yellow, green, green)
Relative air humidity, Operation: 25 % to 95 %
non-condensing Storage: 5 % to 95 % Charging time for full SL Handheld DW: 2 h
charge SL Bodypack DW: 2 h
IP protection class ac- IP2X
cording to IEC/EN 60529 Operating temperature 0 °C to 45 °C
(32 °F to 113 °F)
Dimensions 175 x 135 x 93 mm
(W x D x H) (6.89" x 5.31" x 3.66")
CHG2W
Weight (without power approx. 375 g (0.83 lbs)
supply unit) Input voltage 12 V DC
Input current 1.67 A
CHG 2N
Charging voltage 5 V DC
Network protocol Media Control Protocol Charging current max. 1 A
IPv4 (DHCP, manual) / IPv6
Power consumption 2.5 A
Power supply 12 V DC
Charging time for full SL Tablestand 133-S DW:
Current consumption 1.2 A charge on: 5 h / off: 3 h
Network socket RJ 45 SL Tablestand 153-S DW:
on: 5.5 h / off: 3 h
Dimensions 140 x 100 x 102 mm
(5.3" x 3.9" x 4") Temperature range Operation: 5 °C to 35 °C
(41 °F to 95 °F)
Weight 609 g Storage: -40 °C to 80 °C
Charging bays 2 (-40 °F to 176 °F)
Charging voltage per bay 5V Dimensions 278 x 190 x 10 mm
Charging current per bay 1A (10.9" x 7.5" x 0.4")
Charging status indicator 4 LEDs per bay Weight 525 g (1.16 lbs)
(red, yellow, green, green)
Charging time for full SL Handheld DW: 2 h Accupacks
charge SL Bodypack DW: 2 h
BA 10 BA 30 BA 40
Operating temperature 0 °C to 45 °C
(32 °F to 113 °F) Charging capacity 2200 mAh 2030 mAh 2200 mAh
Output voltage 3.6 V 3.7 V 3.6 V
SYSTEM SPECIFICATION (V3.2) 5/28
SL PASC 2 SL PASC 4
Frequency range 1,880 - 1,930 MHz Frequency range 1,880 - 1,930 MHz
Insertion loss -4.5 dB typ. Insertion loss -8 dB typ.
Port to port isolation 22 dB min. Port to port isolation 26 dB min.
Input / Output return loss -13 dB max. Input / Output return loss -14 dB max.
Connectors AC coupled ports Connectors AC coupled ports
Max. input power 1.5 W Max. input power 1.5 W
Dimensions 150 x 50 x 21 mm Dimensions 210 x 160 x 41 mm
Weight 135 g Weight 663 g
Operating temperature -40 to 85 °C Operating temperature -40 to 85 °C
Relative humidity max. 95 % (non-condensing) Relative humidity max. 95 % (non-condensing)
SYSTEM SPECIFICATION (V3.2) 6/28
DIMENSIONS
SL Rack Receiver DW
212.1
8.35"
1.61"
43.1
1.7"
41
RCA-Buchse
RCA Pin Jack
Zugentlastung
RSMA Cable Grip DC Power-Jack XLR 3 RJ 45 RSMA
0.95"
24.2
17.95 15
0.89"
0.54"
0.66"
1.07"
0.67"
22.7
27.2
13.7
16.7
17
0.71" 0.59"
16.05 32 38.1 16.05
0.63" 1.26" 1.5" 0.63"
64.05
2.52"
180
7.09"
0.32"
8.1
0.81"
20.7
155.8 12.5
6.13" 0.49"
SYSTEM SPECIFICATION (V3.2) 7/28
SL MCR DW
35
180
180
SYSTEM SPECIFICATION (V3.2) 8/28
SL Handheld DW
⌀1.59"
⌀40.3
1.99"
50.5
161.3
6.35"
229.1
9.02"
⌀1.24"
⌀31.5
0.72"
0.81"
20.6
18.3
204.6
8.06"
272.4
10.73"
SYSTEM SPECIFICATION (V3.2) 9/28
SL Bodypack DW
65.5 24.4
2.58" 0.96"
62 19.5
2.44" 0.77"
100.4
3.95"
3.18"
80.8
3.08"
78.2
3,5 mm Klinkenbuchse
3.5 mm jack
SYSTEM SPECIFICATION (V3.2) 10/28
SL Tablestand 133-S DW
120.21 47.86
4.73" 1.88"
166.71
6.56"
XLR3F
SL Tablestand 153-S DW
120.21 47.86
4.73" 1.88"
166.71
6.56"
XLR5F
SL Boundary 114-S DW
85.2 30.5
3.35" 1.2"
4.49"
113.9
1.12"
28.3
SL Headmic 1
ca. 1600
ca. 64.91"
Signal
7
R5 "
ca. . 24
R2
ca.
ca. 4.85"
ca. 123
SYSTEM SPECIFICATION (V3.2) 14/28
CHG 2
MME865
129.9 89.9
5.11" 3.54"
11.19"
284.1
155.4
6.12"
3.66"
93
174.6 67.26
0.31"
8
6.87" 2.65"
0.03"
134.52
0.8
5.3"
47.3 40 87.3
1.86" 1.57" 3.44"
SYSTEM SPECIFICATION (V3.2) 15/28
CHG 2
CHG 2N
102.6
140
100
SYSTEM SPECIFICATION (V3.2) 17/28
CHG 4N
3.94"
100.1
270.1
10.63"
4.04"
102.6
SYSTEM SPECIFICATION (V3.2) 18/28
CHG 2W
71.05
0.23"
5.77
2.8"
207.05
Zentren drahtlose Energieübertragung
8.15"
centers wireless charging
43.5 3.95
1.71" 0.16"
15 "
R
59
0.
⌀0.14"
⌀3.5
190.1
7.48"
3.51"
89.1
145.05
5.71"
108.35
4.27"
85.05
3.35"
2.43"
61.75
50.5
1.99"
71.05
2.8"
207.05 Aktive Fläche drahtlose Energieübertragung
8.15" active areas wireless charging
278.1
10.95"
119.05
4.69"
A A
⌀3.5
⌀0.14"
90.38
0.15"
3.93
3.56"
SYSTEM SPECIFICATION (V3.2) 19/28
SL PASC 2
20,80
40
50,53
6
40
150
SL PASC 4
40,80
23,50
141
210
151,05
160,17
SYSTEM SPECIFICATION (V3.2) 20/28
AWM 2
225
8.86
139.2
5.48
199.2
7.84
Link I
Reverse SMA jack bulkhead
x2
65 R 4.5
2.56 0.18
2.36
60
0.79
95
20
3.74
SYSTEM SPECIFICATION (V3.2) 21/28
AWM 2
Antenna 1-Link I
Antenna 2-Link I
Reverse SMA jack bulkhead
Reverse SMA jack bulkhead
AWM 4
225
8.86
13.03
331
Link II
Reverse SMA jack bulkhead
Link I
Reverse SMA jack bulkhead
x2
65 R 4.5
2.56 0.18
2.36
60
0.79
95
20
3.74
SYSTEM SPECIFICATION (V3.2) 23/28
AWM 4
Antenna 1-Link II
Antenna 2-Link II
Reverse SMA jack bulkhead
Reverse SMA jack bulkhead
Antenna 1-Link I
Antenna 2-Link I
Reverse SMA jack bulkhead
Reverse SMA jack bulkhead
PRODUCT VARIANTS
ACCESSORIES
SL MCR Wallmount Adapter Wallmount adapter for SL MCR DW Art. No. 506848
Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · www.sennheiser.com